linux-next: Tree for October 13
Subsystems (7)
Changes since 20091012:
Dropped tree: i7core_edac (difficult merge conflict)
My fixes tree contains a build fix for powerpc/kvm.
The net tree gained a build failure for which I reverted a commit.
The sound tree lost its build failure.
The mfd tree still lost its build failure.
The voltage tree lost its build failure.
The suspend tree lost its build failure.
The percpu tree gained a build failure so I used the version from next-20091012.
The tty tree gained a build failure for which I reverted a commit.
----------------------------------------------------------------------------
I have created today's linux-next tree atgit://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
(patches at http://www.kernel.org/pub/linux/kernel/v2.6/next/ ). If you are tracking the linux-next tree using git, you should not use "git pull" to do so as that will try to merge the new linux-next release with the old one. You should use "git fetch" as mentioned in the FAQ on the wiki (see below).
You can see which trees have been included by looking in the Next/Trees file in the source. There are also quilt-import.log and merge.log files in the Next directory. Between each merge, the tree was built with a ppc64_defconfig for powerpc and an allmodconfig for x86_64. After the final fixups (if any), it is also built with powerpc allnoconfig (32 and 64 bit), ppc44x_defconfig and allyesconfig (minus CONFIG_PROFILE_ALL_BRANCHES - this fails its final link) and i386, sparc and sparc64 defconfig. These builds also have CONFIG_ENABLE_WARN_DEPRECATED, CONFIG_ENABLE_MUST_CHECK and CONFIG_DEBUG_INFO disabled when necessary.
Below is a summary of the state of the merge.
We are up to 143 trees (counting Linus' and 22 trees of patches pending for Linus' tree), more are welcome (even if they are currently empty). Thanks to those who have contributed, and to those who haven't, please do.
Status of my local build tests will be at
http://kisskb.ellerman.id.au/linux-next . If maintainers want to give advice about cross compilers/configs that work, we are always open to add more builds.
Thanks to Jan Dittmer for adding the linux-next tree to his build tests at http://l4x.org/k/ , the guys at http://test.kernel.org/ and Randy Dunlap for doing many randconfig builds.
There is a wiki covering stuff to do with linux-next at
http://linux.f-seidel.de/linux-next/pmwiki/ . Thanks to Frank Seidel.
Signature · 170 lines
Cheers, Stephen Rothwell [email protected] $ git checkout master $ git reset --hard stable Merging origin/master Merging fixes/fixes Merging arm-current/master Merging m68k-current/for-linus Merging powerpc-merge/merge Merging sparc-current/master Merging scsi-rc-fixes/master Merging net-current/master Merging sound-current/for-linus Merging pci-current/for-linus Merging wireless-current/master Merging kbuild-current/master Merging quilt/driver-core.current Merging quilt/tty.current Merging quilt/usb.current Merging quilt/staging.current Merging cpufreq-current/fixes Merging input-current/for-linus Merging md-current/for-linus Merging audit-current/for-linus Merging crypto-current/master Merging ide-curent/master Merging dwmw2/master Merging arm/devel Merging davinci/for-next Merging pxa/for-next Merging avr32/avr32-arch Merging blackfin/for-linus Merging cris/for-next Merging ia64/test Merging m68k/for-next CONFLICT (content): Merge conflict in drivers/rtc/Kconfig Merging m68knommu/for-next Merging microblaze/next Merging mips/mips-for-linux-next Merging parisc/next Merging powerpc/next Merging 4xx/next Merging galak/next Merging s390/features Merging sh/master Merging sparc/master Merging xtensa/master Merging cifs/master Merging configfs/linux-next Merging ecryptfs/next CONFLICT (content): Merge conflict in fs/ecryptfs/Kconfig Merging ext3/for_next Merging ext4/next Merging fatfs/master Merging fuse/for-next Merging gfs2/master Merging jfs/next Merging nfs/linux-next Merging nfsd/nfsd-next Merging nilfs2/for-next Merging ocfs2/linux-next Merging squashfs/master Merging udf/for_next Merging v9fs/for-next Merging ubifs/linux-next Merging xfs/master Merging reiserfs-bkl/reiserfs/kill-bkl Merging vfs/for-next Merging pci/linux-next Merging hid/for-next Merging quilt/i2c Merging quilt/jdelvare-hwmon Merging quilt/kernel-doc Merging v4l-dvb/master Merging quota/for_next Merging kbuild/master Merging kconfig/for-next Merging ide/master Merging libata/NEXT Merging infiniband/for-next Merging acpi/test Merging ieee1394/for-next Merging ubi/linux-next Merging kvm/linux-next Merging dlm/next Merging scsi/master Merging async_tx/next Merging net/master Merging wireless/master Merging mtd/master Merging crypto/master Merging sound/for-next Merging cpufreq/next Merging quilt/rr Merging mmc/next Merging tmio-mmc/linux-next Merging input/next Merging lsm/for-next Merging block/for-next Merging quilt/device-mapper Merging embedded/master Merging firmware/master Merging pcmcia/master Merging battery/master Merging leds/for-mm Merging backlight/for-mm Merging kgdb/kgdb-next Merging slab/for-next Merging uclinux/for-next Merging md/for-next Merging mfd/for-next Merging hdlc/hdlc-next Merging drm/drm-next Merging voltage/for-next CONFLICT (content): Merge conflict in drivers/mfd/Kconfig CONFLICT (content): Merge conflict in drivers/mfd/Makefile Merging security-testing/next Merging lblnet/master Merging agp/agp-next Merging uwb/for-upstream Merging watchdog/master Merging bdev/master Merging dwmw2-iommu/master Merging cputime/cputime Merging osd/linux-next Merging jc_docs/docs-next Merging nommu/master Merging trivial/for-next Merging audit/for-next Merging omap/for-next Merging quilt/aoe Merging suspend/linux-next Merging bluetooth/master Merging fsnotify/for-next Merging irda/for-next Merging hwlat/for-linus Merging drbd/for-jens CONFLICT (add/add): Merge conflict in drivers/block/drbd/Kconfig CONFLICT (add/add): Merge conflict in drivers/block/drbd/Makefile CONFLICT (add/add): Merge conflict in drivers/block/drbd/drbd_actlog.c CONFLICT (add/add): Merge conflict in drivers/block/drbd/drbd_int.h CONFLICT (add/add): Merge conflict in drivers/block/drbd/drbd_main.c CONFLICT (add/add): Merge conflict in drivers/block/drbd/drbd_nl.c CONFLICT (add/add): Merge conflict in drivers/block/drbd/drbd_receiver.c CONFLICT (add/add): Merge conflict in drivers/block/drbd/drbd_req.c CONFLICT (add/add): Merge conflict in drivers/block/drbd/drbd_worker.c CONFLICT (add/add): Merge conflict in include/linux/drbd.h Merging catalin/for-next Merging alacrity/linux-next CONFLICT (content): Merge conflict in lib/Kconfig Merging i7core_edac/linux_next CONFLICT (content): Merge conflict in arch/x86/kernel/cpu/mcheck/mce.c CONFLICT (content): Merge conflict in drivers/edac/Makefile $ git reset --hard Merging tip/auto-latest Merging oprofile/for-next Merging percpu/for-next $ git reset --hard HEAD^ Merging refs/next/20091012/percpu Merging sfi/sfi-test Merging asm-generic/next Merging hwpoison/hwpoison Merging quilt/driver-core Merging quilt/tty Merging quilt/usb Merging quilt/staging [master fe79f27] Revert "tty: esp: remove broken driver" Merging scsi-post-merge/master [master d8fba4d] Revert "cnic: Add main functions to support bnx2x devices."
[BUILD-FAILURE] next-20091013 - s390x build breaks at mm/fault with !CONFIG_S390_EXEC_PROTECT
Hi Martin,
next-20091013 randconfig build breaks on s390, with
CONFIG_S390_EXEC_PROTECT=y
arch/s390/mm/fault.c: In function 'signal_return':arch/s390/mm/fault.c:221: error: implicit declaration of function 'is_compat_task' make[1]: *** [arch/s390/mm/fault.o] Error 1
is_compat_task is defined at asm/compat.h, including the header, helps
--
arch/s390/mm/fault.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
arch/s390/mm/fault.c +1 -0
@@ -34,6 +34,7 @@#include <asm/pgtable.h> #include <asm/s390_ext.h> #include <asm/mmu_context.h> +#include <asm/compat.h> #include "../kernel/entry.h" #ifndef CONFIG_64BIT
Kamalesh
Re: [BUILD-FAILURE] next-20091013 - s390x build breaks at mm/fault with !CONFIG_S390_EXEC_PROTECT
Quoted 9 lines · On Tue, 13 Oct 2009 15:36:48 +0530 Kamalesh Babulal…
next-20091013 randconfig build breaks on s390, with
CONFIG_S390_EXEC_PROTECT=y
arch/s390/mm/fault.c: In function 'signal_return':arch/s390/mm/fault.c:221: error: implicit declaration of function 'is_compat_task' make[1]: *** [arch/s390/mm/fault.o] Error 1
is_compat_taskis defined atasm/compat.h, including the header, helps
I'll merge that info "[PATCH] fault handler performance optimization" if you don't mind.
Signature · 4 lines
blue skies, Martin. "Reality continues to ruin my life." - Calvin.
Re: [BUILD-FAILURE] next-20091013 - s390x build breaks at mm/fault with !CONFIG_S390_EXEC_PROTECT
Quoted 10 lines · Martin Schwidefsky
Quoted 7 lines · On Tue, 13 Oct 2009 15:36:48 +0530 Kamalesh Babulal…
next-20091013 randconfig build breaks on s390, with
CONFIG_S390_EXEC_PROTECT=y
arch/s390/mm/fault.c: In function 'signal_return':arch/s390/mm/fault.c:221: error: implicit declaration of function 'is_compat_task' make[1]: *** [arch/s390/mm/fault.o] Error 1
Quoted 5 lines
Quoted 2 lines
is_compat_taskis defined atasm/compat.h, including the header, helpsI'll merge that info "[PATCH] fault handler performance optimization" if you don't mind.
Please feel free to merge it.
Quoted 7 lines
Signature · 5 lines
-- blue skies, Martin. "Reality continues to ruin my life." - Calvin.
Kamalesh
[BUILD_FAILURE] next-20091013 s390x - build breaks SCLP VT220 terminal driver
In reply to Stephen RothwellHi Peter,
next-20091013 randconfig build on s390x build breaks with
drivers/s390/built-in.o:(.data+0x3354): undefined reference to `sclp_vt220_pm_event_fn'
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.32-rc4
# Tue Oct 13 04:52:29 2009
#CONFIG_SCHED_MC=yCONFIG_MMU=yCONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=yCONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=yCONFIG_GENERIC_BUG=yCONFIG_NO_IOMEM=yCONFIG_NO_DMA=yCONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_S390=yCONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y
#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not setCONFIG_TASKSTATS=yCONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not setCONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
#
# RCU Subsystem
#CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not setCONFIG_RCU_TRACE=yCONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not setCONFIG_TREE_RCU_TRACE=yCONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not setCONFIG_LOG_BUF_SHIFT=17CONFIG_GROUP_SCHED=yCONFIG_FAIR_GROUP_SCHED=yCONFIG_RT_GROUP_SCHED=yCONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not setCONFIG_SYSFS_DEPRECATED=yCONFIG_SYSFS_DEPRECATED_V2=yCONFIG_RELAY=yCONFIG_NAMESPACES=yCONFIG_UTS_NS=yCONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not setCONFIG_NET_NS=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not setCONFIG_SYSCTL=yCONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not setCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_KALLSYMS_EXTRA_PASS=yCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_AIO=yCONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#CONFIG_PERF_EVENTS=yCONFIG_EVENT_PROFILE=yCONFIG_PERF_COUNTERS=yCONFIG_VM_EVENT_COUNTERS=yCONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
# CONFIG_SLUB is not setCONFIG_SLQB=y
# CONFIG_SLOB is not setCONFIG_PROFILING=yCONFIG_TRACEPOINTS=yCONFIG_OPROFILE=yCONFIG_HAVE_OPROFILE=yCONFIG_HAVE_SYSCALL_WRAPPERS=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_USE_GENERIC_SMP_HELPERS=yCONFIG_HAVE_DEFAULT_NO_SPIN_MUTEXES=y
#
# GCOV-based kernel profiling
#CONFIG_GCOV_KERNEL=y
# CONFIG_GCOV_PROFILE_ALL is not setCONFIG_SLOW_WORK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not setCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0
# CONFIG_MODULES is not setCONFIG_INIT_ALL_POSSIBLE=yCONFIG_STOP_MACHINE=yCONFIG_BLOCK=yCONFIG_LBDAF=yCONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not setCONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not setCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_FREEZER is not set
#
# Base setup
#
#
# Processor type and features
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not setCONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_64BIT is not setCONFIG_32BIT=yCONFIG_KTIME_SCALAR=yCONFIG_SMP=yCONFIG_NR_CPUS=32CONFIG_HOTPLUG_CPU=yCONFIG_MATHEMU=yCONFIG_AUDIT_ARCH=yCONFIG_S390_EXEC_PROTECT=y
#
# Code generation options
#CONFIG_MARCH_G5=y
# CONFIG_MARCH_Z900 is not set
# CONFIG_MARCH_Z990 is not set
# CONFIG_MARCH_Z9_109 is not set
# CONFIG_MARCH_Z10 is not set
# CONFIG_PACK_STACK is not setCONFIG_CHECK_STACK=yCONFIG_STACK_GUARD=256
# CONFIG_WARN_STACK is not setCONFIG_ARCH_POPULATES_NODE_MAP=y
#
# Kernel preemption
#
# CONFIG_PREEMPT_NONE is not setCONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not setCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_SPARSEMEM_DEFAULT=yCONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=yCONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=yCONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not setCONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=yCONFIG_HAVE_MEMORY_PRESENT=yCONFIG_SPARSEMEM_STATIC=yCONFIG_SPARSEMEM_VMEMMAP_ENABLE=yCONFIG_SPARSEMEM_VMEMMAP=yCONFIG_MEMORY_HOTPLUG=yCONFIG_MEMORY_HOTPLUG_SPARSE=yCONFIG_MEMORY_HOTREMOVE=yCONFIG_PAGEFLAGS_EXTENDED=yCONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not setCONFIG_ZONE_DMA_FLAG=0CONFIG_VIRT_TO_BUS=yCONFIG_HAVE_MLOCK=yCONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not setCONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
# I/O subsystem configuration
#CONFIG_QDIO=yCONFIG_CHSC_SCH=y
#
# Misc
#CONFIG_IPL=yCONFIG_IPL_TAPE=y
# CONFIG_IPL_VM is not set
# CONFIG_BINFMT_ELF is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not setCONFIG_FORCE_MAX_ZONEORDER=9
# CONFIG_PROCESS_DEBUG is not setCONFIG_PFAULT=yCONFIG_SHARED_KERNEL=yCONFIG_CMM=yCONFIG_CMM_PROC=yCONFIG_APPLDATA_BASE=yCONFIG_APPLDATA_MEM=y
# CONFIG_APPLDATA_OS is not setCONFIG_APPLDATA_NET_SUM=y
# CONFIG_HZ_100 is not setCONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not setCONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not setCONFIG_S390_HYPFS_FS=y
# CONFIG_KEXEC is not set
# CONFIG_ZFCPDUMP is not setCONFIG_SECCOMP=y
#
# Power Management
#CONFIG_PM=yCONFIG_PM_DEBUG=yCONFIG_PM_ADVANCED_DEBUG=yCONFIG_PM_VERBOSE=y
# CONFIG_PM_SLEEP_ADVANCED_DEBUG is not setCONFIG_PM_RUNTIME=yCONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_MMAP=y
# CONFIG_UNIX is not setCONFIG_XFRM=yCONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set CONFIG_XFRM_STATISTICS=yCONFIG_XFRM_IPCOMP=yCONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set CONFIG_IUCV=yCONFIG_AFIUCV=yCONFIG_INET=yCONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_ASK_IP_FIB_HASH is not set CONFIG_IP_FIB_TRIE=y
# CONFIG_IP_FIB_HASH is not set
# CONFIG_IP_FIB_TRIE_STATS is not set CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not set CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set CONFIG_NET_IPGRE=y CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE=yCONFIG_IP_PIMSM_V1=y
# CONFIG_IP_PIMSM_V2 is not set
# CONFIG_ARPD is not setCONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not setCONFIG_INET_ESP=yCONFIG_INET_IPCOMP=y CONFIG_INET_XFRM_TUNNEL=y CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_BIC=yCONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set CONFIG_TCP_CONG_HTCP=y CONFIG_TCP_CONG_HSTCP=y CONFIG_TCP_CONG_HYBLA=y CONFIG_TCP_CONG_VEGAS=y
# CONFIG_TCP_CONG_SCALABLE is not set CONFIG_TCP_CONG_LP=yCONFIG_TCP_CONG_VENO=yCONFIG_TCP_CONG_YEAH=y CONFIG_TCP_CONG_ILLINOIS=y
# CONFIG_DEFAULT_BIC is not set CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=yCONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set CONFIG_IPV6_ROUTER_PREF=y
# CONFIG_IPV6_ROUTE_INFO is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set CONFIG_INET6_AH=yCONFIG_INET6_ESP=yCONFIG_INET6_IPCOMP=y
# CONFIG_IPV6_MIP6 is not set CONFIG_INET6_XFRM_TUNNEL=y CONFIG_INET6_TUNNEL=y CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=yCONFIG_IPV6_SIT_6RD=y CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=y CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
# CONFIG_IPV6_MROUTE is not set CONFIG_NETLABEL=yCONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not setCONFIG_IP_SCTP=yCONFIG_SCTP_DBG_MSG=y CONFIG_SCTP_DBG_OBJCNT=y
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=yCONFIG_RDS=yCONFIG_RDS_TCP=y
# CONFIG_RDS_DEBUG is not set
# CONFIG_TIPC is not setCONFIG_ATM=y
# CONFIG_ATM_CLIP is not set CONFIG_ATM_LANE=yCONFIG_ATM_MPOA=yCONFIG_ATM_BR2684=y CONFIG_ATM_BR2684_IPFILTER=yCONFIG_STP=yCONFIG_GARP=yCONFIG_BRIDGE=yCONFIG_VLAN_8021Q=yCONFIG_VLAN_8021Q_GVRP=y
# CONFIG_DECNET is not setCONFIG_LLC=y
# CONFIG_LLC2 is not setCONFIG_IPX=y
# CONFIG_IPX_INTERN is not set
# CONFIG_ATALK is not setCONFIG_X25=yCONFIG_LAPB=yCONFIG_ECONET=yCONFIG_ECONET_AUNUDP=yCONFIG_ECONET_NATIVE=yCONFIG_WAN_ROUTER=yCONFIG_PHONET=yCONFIG_IEEE802154=yCONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#CONFIG_NET_SCH_CBQ=yCONFIG_NET_SCH_HTB=yCONFIG_NET_SCH_HFSC=yCONFIG_NET_SCH_ATM=y
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not setCONFIG_NET_SCH_RED=yCONFIG_NET_SCH_SFQ=yCONFIG_NET_SCH_TEQL=y
# CONFIG_NET_SCH_TBF is not setCONFIG_NET_SCH_GRED=yCONFIG_NET_SCH_DSMARK=yCONFIG_NET_SCH_NETEM=yCONFIG_NET_SCH_DRR=yCONFIG_NET_SCH_INGRESS=y
#
# Classification
#CONFIG_NET_CLS=yCONFIG_NET_CLS_BASIC=yCONFIG_NET_CLS_TCINDEX=yCONFIG_NET_CLS_ROUTE4=yCONFIG_NET_CLS_ROUTE=y
# CONFIG_NET_CLS_FW is not setCONFIG_NET_CLS_U32=y
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not setCONFIG_NET_CLS_RSVP=yCONFIG_NET_CLS_RSVP6=y
# CONFIG_NET_CLS_FLOW is not setCONFIG_NET_EMATCH=yCONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not setCONFIG_NET_EMATCH_NBYTE=y
# CONFIG_NET_EMATCH_U32 is not setCONFIG_NET_EMATCH_META=yCONFIG_NET_EMATCH_TEXT=yCONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not setCONFIG_NET_ACT_GACT=y
# CONFIG_GACT_PROB is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_NAT is not setCONFIG_NET_ACT_PEDIT=yCONFIG_NET_ACT_SIMP=y
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_CLS_IND is not setCONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not setCONFIG_NET_DROP_MONITOR=y
# CONFIG_CAN is not setCONFIG_AF_RXRPC=yCONFIG_AF_RXRPC_DEBUG=yCONFIG_RXKAD=yCONFIG_FIB_RULES=y
# CONFIG_WIMAX is not setCONFIG_RFKILL=yCONFIG_RFKILL_LEDS=y
# CONFIG_NET_9P is not set
# CONFIG_PCMCIA is not setCONFIG_CCW=y
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"CONFIG_DEVTMPFS=yCONFIG_DEVTMPFS_MOUNT=yCONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not setCONFIG_EXTRA_FIRMWARE=""CONFIG_SYS_HYPERVISOR=yCONFIG_CONNECTOR=yCONFIG_PROC_EVENTS=y
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
#
# SCSI device support
#CONFIG_RAID_ATTRS=yCONFIG_SCSI=y
# CONFIG_SCSI_DMA is not setCONFIG_SCSI_TGT=yCONFIG_SCSI_NETLINK=yCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=yCONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not setCONFIG_BLK_DEV_SR=yCONFIG_BLK_DEV_SR_VENDOR=yCONFIG_CHR_DEV_SG=yCONFIG_CHR_DEV_SCH=yCONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=yCONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_FC_TGT_ATTRS is not set CONFIG_SCSI_ISCSI_ATTRS=y CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set CONFIG_SCSI_DH=yCONFIG_SCSI_DH_RDAC=y CONFIG_SCSI_DH_HP_SW=y
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_DH_ALUA is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_MD is not setCONFIG_NETDEVICES=y
# CONFIG_IFB is not setCONFIG_DUMMY=y
# CONFIG_BONDING is not set CONFIG_MACVLAN=yCONFIG_EQUALIZER=y
# CONFIG_TUN is not set
# CONFIG_VETH is not set CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NETDEV_1000=yCONFIG_NETDEV_10000=y
# CONFIG_TR is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers #
# CONFIG_WAN is not setCONFIG_ATM_DRIVERS=yCONFIG_ATM_DUMMY=yCONFIG_ATM_TCP=y
# CONFIG_IEEE802154_DRIVERS is not set
#
# S/390 network device drivers
#CONFIG_LCS=y
# CONFIG_CTCM is not setCONFIG_NETIUCV=y
# CONFIG_SMSGIUCV is not setCONFIG_CLAW=yCONFIG_QETH=yCONFIG_QETH_L2=yCONFIG_QETH_L3=yCONFIG_QETH_IPV6=yCONFIG_CCWGROUP=yCONFIG_PPP=yCONFIG_PPP_MULTILINK=y
# CONFIG_PPP_FILTER is not setCONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not setCONFIG_PPP_DEFLATE=yCONFIG_PPP_BSDCOMP=y
# CONFIG_PPP_MPPE is not setCONFIG_PPPOE=yCONFIG_PPPOATM=y
# CONFIG_PPPOL2TP is not setCONFIG_SLIP=y
# CONFIG_SLIP_COMPRESSED is not setCONFIG_SLHC=yCONFIG_SLIP_SMART=yCONFIG_SLIP_MODE_SLIP6=y
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not setCONFIG_VIRTIO_NET=y
#
# Character devices
#
# CONFIG_DEVKMEM is not setCONFIG_UNIX98_PTYS=yCONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not setCONFIG_HVC_DRIVER=yCONFIG_HVC_IUCV=y
# CONFIG_VIRTIO_CONSOLE is not setCONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_VIRTIO is not set
# CONFIG_R3964 is not setCONFIG_RAW_DRIVER=yCONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
#
# S/390 character device drivers
#CONFIG_TN3270=y
# CONFIG_TN3270_TTY is not set
# CONFIG_TN3270_FS is not set
# CONFIG_TN3215 is not setCONFIG_SCLP_TTY=yCONFIG_SCLP_CONSOLE=yCONFIG_SCLP_VT220_TTY=y
# CONFIG_SCLP_VT220_CONSOLE is not set
# CONFIG_SCLP_CPI is not setCONFIG_SCLP_ASYNC=y
# CONFIG_S390_TAPE is not setCONFIG_VMLOGRDR=yCONFIG_VMCP=y
# CONFIG_MONREADER is not setCONFIG_MONWRITER=y
# CONFIG_S390_VMUR is not set
#
# PPS support
#
# CONFIG_PPS is not setCONFIG_POWER_SUPPLY=yCONFIG_POWER_SUPPLY_DEBUG=y
# CONFIG_BATTERY_DS2760 is not setCONFIG_THERMAL=yCONFIG_WATCHDOG=yCONFIG_WATCHDOG_NOWAYOUT=y
#
# Watchdog Device Drivers
#CONFIG_SOFT_WATCHDOG=yCONFIG_ZVM_WATCHDOG=yCONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not setCONFIG_REGULATOR_FIXED_VOLTAGE=yCONFIG_REGULATOR_VIRTUAL_CONSUMER=y
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not setCONFIG_REGULATOR_BQ24022=yCONFIG_MEMSTICK=yCONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#CONFIG_MEMSTICK_UNSAFE_RESUME=yCONFIG_MSPRO_BLOCK=y
#
# MemoryStick Host Controller Drivers
#CONFIG_NEW_LEDS=y
# CONFIG_LEDS_CLASS is not set
#
# LED drivers
#
#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=yCONFIG_LEDS_TRIGGER_TIMER=yCONFIG_LEDS_TRIGGER_HEARTBEAT=yCONFIG_LEDS_TRIGGER_BACKLIGHT=yCONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target) # CONFIG_ACCESSIBILITY=y # CONFIG_AUXDISPLAY is not set
#
# TI VLYNQ
#CONFIG_STAGING=y
# CONFIG_STAGING_EXCLUDE_BUILD is not setCONFIG_ECHO=y
#
# Qualcomm MSM Camera And Video
#
#
# Camera Sensor Selection
#CONFIG_INPUT_GPIO=yCONFIG_POHMELFS=y
# CONFIG_POHMELFS_DEBUG is not setCONFIG_POHMELFS_CRYPTO=yCONFIG_PLAN9AUTH=y
#
# RAR Register Driver
#
# CONFIG_RAR_REGISTER is not set
# CONFIG_RAMZSWAP is not set
#
# File systems
#CONFIG_EXT2_FS=yCONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not setCONFIG_EXT2_FS_SECURITY=yCONFIG_EXT2_FS_XIP=yCONFIG_EXT3_FS=yCONFIG_EXT3_DEFAULTS_TO_ORDERED=y
# CONFIG_EXT3_FS_XATTR is not setCONFIG_EXT4_FS=yCONFIG_EXT4_FS_XATTR=yCONFIG_EXT4_FS_POSIX_ACL=yCONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not setCONFIG_FS_XIP=yCONFIG_JBD=yCONFIG_JBD_DEBUG=yCONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not setCONFIG_FS_MBCACHE=yCONFIG_REISERFS_FS=yCONFIG_REISERFS_CHECK=yCONFIG_REISERFS_PROC_INFO=yCONFIG_REISERFS_FS_XATTR=yCONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not setCONFIG_FS_POSIX_ACL=yCONFIG_XFS_FS=yCONFIG_XFS_QUOTA=yCONFIG_XFS_POSIX_ACL=yCONFIG_XFS_RT=yCONFIG_XFS_DEBUG=y
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not setCONFIG_BTRFS_FS=yCONFIG_BTRFS_FS_POSIX_ACL=yCONFIG_NILFS2_FS=yCONFIG_FILE_LOCKING=yCONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not setCONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not setCONFIG_QUOTACTL=yCONFIG_AUTOFS_FS=yCONFIG_AUTOFS4_FS=yCONFIG_FUSE_FS=yCONFIG_CUSE=yCONFIG_GENERIC_ACL=y
#
# Caches
#CONFIG_FSCACHE=yCONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not setCONFIG_FSCACHE_DEBUG=yCONFIG_CACHEFILES=yCONFIG_CACHEFILES_DEBUG=yCONFIG_CACHEFILES_HISTOGRAM=y
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=yCONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=yCONFIG_MSDOS_FS=y
# CONFIG_VFAT_FS is not setCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_NTFS_FS=yCONFIG_NTFS_DEBUG=yCONFIG_NTFS_RW=y
#
# Pseudo filesystems
#CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not setCONFIG_PROC_SYSCTL=yCONFIG_PROC_PAGE_MONITOR=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not setCONFIG_CONFIGFS_FS=yCONFIG_MISC_FILESYSTEMS=yCONFIG_ADFS_FS=yCONFIG_ADFS_FS_RW=yCONFIG_AFFS_FS=yCONFIG_ECRYPT_FS=y
# CONFIG_HFS_FS is not setCONFIG_HFSPLUS_FS=yCONFIG_BEFS_FS=yCONFIG_BEFS_DEBUG=yCONFIG_BFS_FS=y
# CONFIG_EFS_FS is not setCONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not setCONFIG_VXFS_FS=yCONFIG_MINIX_FS=yCONFIG_OMFS_FS=yCONFIG_HPFS_FS=yCONFIG_QNX4FS_FS=y
# CONFIG_ROMFS_FS is not setCONFIG_SYSV_FS=yCONFIG_UFS_FS=yCONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not setCONFIG_NETWORK_FILESYSTEMS=yCONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_FSCACHE is not set
# CONFIG_NFSD is not setCONFIG_LOCKD=yCONFIG_EXPORTFS=yCONFIG_NFS_COMMON=yCONFIG_SUNRPC=yCONFIG_SUNRPC_GSS=yCONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not setCONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not setCONFIG_NCP_FS=yCONFIG_NCPFS_PACKET_SIGNING=yCONFIG_NCPFS_IOCTL_LOCKING=yCONFIG_NCPFS_STRONG=yCONFIG_NCPFS_NFS_NS=y
# CONFIG_NCPFS_OS2_NS is not setCONFIG_NCPFS_SMALLDOS=yCONFIG_NCPFS_NLS=yCONFIG_NCPFS_EXTRAS=yCONFIG_CODA_FS=yCONFIG_AFS_FS=yCONFIG_AFS_DEBUG=y
# CONFIG_AFS_FSCACHE is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not setCONFIG_AMIGA_PARTITION=yCONFIG_MSDOS_PARTITION=yCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=yCONFIG_NLS_CODEPAGE_737=yCONFIG_NLS_CODEPAGE_775=y
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not setCONFIG_NLS_CODEPAGE_857=yCONFIG_NLS_CODEPAGE_860=yCONFIG_NLS_CODEPAGE_861=yCONFIG_NLS_CODEPAGE_862=y
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not setCONFIG_NLS_CODEPAGE_865=yCONFIG_NLS_CODEPAGE_866=yCONFIG_NLS_CODEPAGE_869=yCONFIG_NLS_CODEPAGE_936=y
# CONFIG_NLS_CODEPAGE_950 is not setCONFIG_NLS_CODEPAGE_932=yCONFIG_NLS_CODEPAGE_949=y
# CONFIG_NLS_CODEPAGE_874 is not setCONFIG_NLS_ISO8859_8=yCONFIG_NLS_CODEPAGE_1250=yCONFIG_NLS_CODEPAGE_1251=yCONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not setCONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not setCONFIG_NLS_ISO8859_5=yCONFIG_NLS_ISO8859_6=yCONFIG_NLS_ISO8859_7=yCONFIG_NLS_ISO8859_9=y
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not setCONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not setCONFIG_NLS_UTF8=yCONFIG_DLM=yCONFIG_DLM_DEBUG=y
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=yCONFIG_PRINTK_TIME=yCONFIG_ENABLE_WARN_DEPRECATED=yCONFIG_ENABLE_MUST_CHECK=yCONFIG_FRAME_WARN=1024CONFIG_MAGIC_SYSRQ=yCONFIG_STRIP_ASM_SYMS=yCONFIG_UNUSED_SYMBOLS=yCONFIG_DEBUG_FS=yCONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_KERNEL is not setCONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=yCONFIG_SLQB_DEBUG=yCONFIG_SLQB_DEBUG_ON=yCONFIG_SLQB_SYSFS=y
# CONFIG_SLQB_STATS is not setCONFIG_TRACE_IRQFLAGS=yCONFIG_STACKTRACE=yCONFIG_DEBUG_BUGVERBOSE=yCONFIG_DEBUG_MEMORY_INIT=yCONFIG_FRAME_POINTER=yCONFIG_RCU_CPU_STALL_DETECTOR=yCONFIG_LATENCYTOP=yCONFIG_SYSCTL_SYSCALL_CHECK=yCONFIG_NOP_TRACER=yCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_TRACER=yCONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_HAVE_SYSCALL_TRACEPOINTS=yCONFIG_TRACER_MAX_TRACE=yCONFIG_RING_BUFFER=yCONFIG_EVENT_TRACING=yCONFIG_CONTEXT_SWITCH_TRACER=yCONFIG_RING_BUFFER_ALLOW_SWAP=yCONFIG_TRACING=yCONFIG_GENERIC_TRACER=yCONFIG_TRACING_SUPPORT=yCONFIG_FTRACE=yCONFIG_FUNCTION_TRACER=yCONFIG_FUNCTION_GRAPH_TRACER=yCONFIG_IRQSOFF_TRACER=yCONFIG_SCHED_TRACER=yCONFIG_FTRACE_SYSCALLS=yCONFIG_BOOT_TRACER=yCONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not setCONFIG_STACK_TRACER=y
# CONFIG_KMEMTRACE is not setCONFIG_WORKQUEUE_TRACER=yCONFIG_BLK_DEV_IO_TRACE=yCONFIG_DYNAMIC_FTRACE=yCONFIG_FUNCTION_PROFILER=yCONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not setCONFIG_RING_BUFFER_BENCHMARK=yCONFIG_BUILD_DOCSRC=y
# CONFIG_DYNAMIC_DEBUG is not setCONFIG_SAMPLES=y
#
# Security options
#CONFIG_KEYS=yCONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_SECURITY=yCONFIG_SECURITYFS=yCONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y CONFIG_SECURITY_PATH=y CONFIG_SECURITY_FILE_CAPABILITIES=y CONFIG_LSM_MMAP_MIN_ADDR=65536 CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_SECURITY_SELINUX_DEVELOP=y
# CONFIG_SECURITY_SELINUX_AVC_STATS is not set CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX=y CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX_VALUE=19 CONFIG_SECURITY_SMACK=y CONFIG_SECURITY_TOMOYO=yCONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_FIPS=yCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD=yCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_BLKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG=yCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_PCOMP=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=yCONFIG_CRYPTO_GF128MUL=y
# CONFIG_CRYPTO_NULL is not setCONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not setCONFIG_CRYPTO_AUTHENC=y
#
# Authenticated Encryption with Associated Data
#CONFIG_CRYPTO_CCM=yCONFIG_CRYPTO_GCM=yCONFIG_CRYPTO_SEQIV=y
#
# Block modes
#CONFIG_CRYPTO_CBC=yCONFIG_CRYPTO_CTR=yCONFIG_CRYPTO_CTS=yCONFIG_CRYPTO_ECB=yCONFIG_CRYPTO_LRW=yCONFIG_CRYPTO_PCBC=yCONFIG_CRYPTO_XTS=y
#
# Hash modes
#CONFIG_CRYPTO_HMAC=yCONFIG_CRYPTO_XCBC=yCONFIG_CRYPTO_VMAC=y
#
# Digest
#CONFIG_CRYPTO_CRC32C=yCONFIG_CRYPTO_GHASH=yCONFIG_CRYPTO_MD4=yCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not setCONFIG_CRYPTO_RMD160=yCONFIG_CRYPTO_RMD256=y
# CONFIG_CRYPTO_RMD320 is not setCONFIG_CRYPTO_SHA1=yCONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not setCONFIG_CRYPTO_TGR192=y
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#CONFIG_CRYPTO_AES=yCONFIG_CRYPTO_ANUBIS=yCONFIG_CRYPTO_ARC4=yCONFIG_CRYPTO_BLOWFISH=y
# CONFIG_CRYPTO_CAMELLIA is not setCONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not setCONFIG_CRYPTO_DES=yCONFIG_CRYPTO_FCRYPT=yCONFIG_CRYPTO_KHAZAD=y
# CONFIG_CRYPTO_SALSA20 is not setCONFIG_CRYPTO_SEED=y
# CONFIG_CRYPTO_SERPENT is not setCONFIG_CRYPTO_TEA=yCONFIG_CRYPTO_TWOFISH=yCONFIG_CRYPTO_TWOFISH_COMMON=y
#
# Compression
#CONFIG_CRYPTO_DEFLATE=yCONFIG_CRYPTO_ZLIB=yCONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#CONFIG_CRYPTO_ANSI_CPRNG=yCONFIG_CRYPTO_HW=yCONFIG_ZCRYPT=yCONFIG_ZCRYPT_MONOLITHIC=yCONFIG_CRYPTO_SHA1_S390=yCONFIG_CRYPTO_SHA256_S390=yCONFIG_CRYPTO_SHA512_S390=yCONFIG_CRYPTO_DES_S390=y
# CONFIG_CRYPTO_AES_S390 is not setCONFIG_S390_PRNG=yCONFIG_BINARY_PRINTF=y
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_LAST_BIT=yCONFIG_CRC_CCITT=yCONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not setCONFIG_CRC_ITU_T=yCONFIG_CRC32=y
# CONFIG_CRC7 is not setCONFIG_LIBCRC32C=yCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_LZO_COMPRESS=yCONFIG_LZO_DECOMPRESS=yCONFIG_TEXTSEARCH=yCONFIG_TEXTSEARCH_KMP=yCONFIG_TEXTSEARCH_BM=yCONFIG_TEXTSEARCH_FSM=yCONFIG_NLATTR=yCONFIG_SHM_SIGNAL=y
# CONFIG_IOQ is not setCONFIG_VIRTUALIZATION=yCONFIG_VIRTIO=yCONFIG_VIRTIO_RING=yCONFIG_VIRTIO_BALLOON=y
Kamalesh
Re: [BUILD_FAILURE] next-20091013 s390x - build breaks SCLP VT220 terminal driver
Quoted 3 lines · On Tue, 13 Oct 2009 21:58:09 +0530 Kamalesh Babulal…
next-20091013 randconfig build on s390x build breaks withdrivers/s390/built-in.o:(.data+0x3354): undefined reference to `sclp_vt220_pm_event_fn'
This patch should take care of it:
--
Subject: [PATCH] sclp_vt220 build fix
From: Martin Schwidefsky <[email protected]>
Fix this build error:
next-20091013 randconfig build on s390x build breaks with
drivers/s390/built-in.o:(.data+0x3354): undefined reference to `sclp_vt220_pm_event_fn'
---
drivers/s390/char/sclp_vt220.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/s390/char/sclp_vt220.c +4 -0
@@ -93,8 +93,10 @@ static int __initdata sclp_vt220_init_costatic int sclp_vt220_flush_later;static void sclp_vt220_receiver_fn (struct evbuf_header *evbuf); +#ifdef CONFIG_SCLP_VT220_CONSOLE static void sclp_vt220_pm_event_fn (struct sclp_register *reg,enum sclp_pm_event sclp_pm_event); +#endif static int __sclp_vt220_emit (struct sclp_vt220_request *request);static void sclp_vt220_emit_current (void );
@@ -104,7 +106,9 @@ static struct sclp_register sclp_vt220_r .receive_mask = EVTYP_VT220MSG_MASK, .state_change_fn = NULL, .receiver_fn = sclp_vt220_receiver_fn, +#ifdef CONFIG_SCLP_VT220_CONSOLE .pm_event_fn = sclp_vt220_pm_event_fn, +#endif };
Signature · 4 lines
blue skies, Martin. "Reality continues to ruin my life." - Calvin.
Re: [BUILD_FAILURE] next-20091013 s390x - build breaks SCLP VT220 terminal driver
In reply to Kamalesh BabulalQuoted 3 lines · On Tue, 13 Oct 2009 21:58:09 +0530 Kamalesh Babulal…
next-20091013 randconfig build on s390x build breaks withdrivers/s390/built-in.o:(.data+0x3354): undefined reference to `sclp_vt220_pm_event_fn'
Michael pointed out a problem with my fix: suspend/resume of a vt220 console with SCLP_VT220_CONSOLE=n doesn't work any more. V2 of the patch:
--
Subject: [PATCH] sclp_vt220 build fix
From: Michael Holzheu <[email protected]>
Fix this build error:
next-20091013 randconfig build on s390x build breaks with
drivers/s390/built-in.o:(.data+0x3354): undefined reference to `sclp_vt220_pm_event_fn'
---
drivers/s390/char/sclp_vt220.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-)
drivers/s390/char/sclp_vt220.c +15 -15
@@ -705,21 +705,6 @@ out_driver: }__initcall (sclp_vt220_tty_init); -#ifdef CONFIG_SCLP_VT220_CONSOLE - -static void -sclp_vt220_con_write (struct console *con,const char *buf,unsigned int count) -{ -__sclp_vt220_write ((const unsigned char *) buf, count,1 ,1 ,0 ); -} - -static struct tty_driver * -sclp_vt220_con_device (struct console *c,int *index) -{ - *index =0 ; -return sclp_vt220_driver; -} -static void __sclp_vt220_flush_buffer (void ) {unsigned long flags;
@@ -776,6 +761,21 @@ static void sclp_vt220_pm_event_fn(struc } } +#ifdef CONFIG_SCLP_VT220_CONSOLE + +static void +sclp_vt220_con_write (struct console *con,const char *buf,unsigned int count) +{ +__sclp_vt220_write ((const unsigned char *) buf, count,1 ,1 ,0 ); +} + +static struct tty_driver * +sclp_vt220_con_device (struct console *c,int *index) +{ + *index =0 ; +return sclp_vt220_driver; +} +static int sclp_vt220_notify (struct notifier_block *self,unsigned long event,void *data)
Signature · 4 lines
blue skies, Martin. "Reality continues to ruin my life." - Calvin.
Kamalesh Babulal
Tested-byRe: [BUILD_FAILURE] next-20091013 s390x - build breaks SCLP VT220 terminal driver
Quoted 10 lines · Martin Schwidefsky
Quoted 3 lines · On Tue, 13 Oct 2009 21:58:09 +0530 Kamalesh Babulal…
next-20091013 randconfig build on s390x build breaks withdrivers/s390/built-in.o:(.data+0x3354): undefined reference to `sclp_vt220_pm_event_fn'
Michael pointed out a problem with my fix: suspend/resume of a vt220 console with SCLP_VT220_CONSOLE=n doesn't work any more. V2 of the patch:
Thanks, the patch fixes the build failure.
Quoted 11 lines
--
Subject: [PATCH]sclp_vt220build fixFrom: Michael Holzheu <[email protected]>
Fix this build error:
next-20091013 randconfig build on s390x build breaks withdrivers/s390/built-in.o:(.data+0x3354): undefined reference to `sclp_vt220_pm_event_fn'
Quoted 61 lines
Reported-by Kamalesh Babulal <[email protected]>Signed-off-by Michael Holzheu <[email protected]>Signed-off-by Martin Schwidefsky <[email protected]>---
drivers/s390/char/sclp_vt220.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-)diff -urpN
linux-2.6/drivers/s390/char/sclp_vt220.clinux-2.6-patched/drivers/s390/char/sclp_vt220.cdrivers/s390/char/sclp_vt220.c +15
-15@@ -705,21 +705,6 @@ out_driver: }__initcall (sclp_vt220_tty_init); -#ifdef CONFIG_SCLP_VT220_CONSOLE - -static void -sclp_vt220_con_write (struct console *con,const char *buf,unsigned int count) -{ -__sclp_vt220_write ((const unsigned char *) buf, count,1 ,1 ,0 ); -} - -static struct tty_driver * -sclp_vt220_con_device (struct console *c,int *index) -{ - *index =0 ; -return sclp_vt220_driver; -} -static void __sclp_vt220_flush_buffer (void ) {unsigned long flags;@@ -776,6 +761,21 @@ static void sclp_vt220_pm_event_fn(struc } } +#ifdef CONFIG_SCLP_VT220_CONSOLE + +static void +sclp_vt220_con_write (struct console *con,const char *buf,unsigned int count) +{ +__sclp_vt220_write ((const unsigned char *) buf, count,1 ,1 ,0 ); +} + +static struct tty_driver * +sclp_vt220_con_device (struct console *c,int *index) +{ + *index =0 ; +return sclp_vt220_driver; +} +static int sclp_vt220_notify (struct notifier_block *self,unsigned long event,void *data)Signature · 4 lines
blue skies, Martin. "Reality continues to ruin my life." - Calvin.
Kamalesh
PATCH 1/1 wan: pci200syn needs capability.h
In reply to Stephen RothwellFrom: Randy Dunlap <[email protected]>
Driver is missing header file capability.h:
drivers/net/wan/pci200syn.c:212: error: implicit declaration of function 'capable' drivers/net/wan/pci200syn.c:212: error: 'CAP_NET_ADMIN' undeclared (first use in this function)
--- drivers/net/wan/pci200syn.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/wan/pci200syn.c +1 -0
@@ -18,6 +18,7 @@#include <linux/kernel.h> #include <linux/slab.h> #include <linux/types.h> +#include <linux/capability.h> #include <linux/fcntl.h> #include <linux/in.h> #include <linux/string.h>
Krzysztof Halasa
maintainerRe: [PATCH] wan: pci200syn needs capability.h
Quoted 4 lines · Randy Dunlap
Driver is missing header file
capability.h:
drivers/net/wan/pci200syn.c:212: error: implicit declaration of function 'capable'drivers/net/wan/pci200syn.c:212: error: 'CAP_NET_ADMIN' undeclared (first use in this function)
Thanks, but I think a patch for a bunch of WAN drivers has been already posted.
Signature · 1 line
Krzysztof Halasa
PATCH 1/1 whci: fix type and format warnings
In reply to Stephen RothwellFrom: Randy Dunlap <[email protected]>
Fix format and type warnings in whci driver:
drivers/usb/host/whci/qset.c:440: warning: comparison of distinct pointer types lacks a cast drivers/usb/host/whci/qset.c:442: warning: format '%d' expects type 'int', but argument 6 has type 'size_t' drivers/usb/host/whci/qset.c:488: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' drivers/usb/host/whci/qset.c:509: warning: format '%08x' expects type 'unsigned int', but argument 5 has type 'dma_addr_t' drivers/usb/host/whci/qset.c:568: warning: comparison of distinct pointer types lacks a cast drivers/usb/host/whci/qset.c:571: warning: format '%d' expects type 'int', but argument 5 has type 'size_t' drivers/usb/host/whci/qset.c:590: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' drivers/usb/host/whci/qset.c:590: warning: format '%d' expects type 'int', but argument 6 has type 'long int'
--- drivers/usb/host/whci/qset.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-)
drivers/usb/host/whci/qset.c +8 -7
@@ -437,9 +437,9 @@ static int qset_add_urb_sg(struct whc *w } dma_addr =sg_dma_address (sg); - dma_remaining =min (sg_dma_len (sg), remaining); + dma_remaining =min_t (size_t,sg_dma_len (sg), remaining); -dev_dbg (&whc->umc->dev,"adding sg[%d] %08x %d\n" , i, (unsigned )dma_addr, +dev_dbg (&whc->umc->dev,"adding sg[%d] %08x %zu\n" , i, (unsigned )dma_addr, dma_remaining);while (dma_remaining) {
@@ -485,7 +485,7 @@ static int qset_add_urb_sg(struct whc *w dma_len = ep - dma_addr; } -dev_dbg (&whc->umc->dev,"adding %d\n" , dma_len); +dev_dbg (&whc->umc->dev,"adding %zu\n" , dma_len); std->len += dma_len; std->ntds_remaining =-1 ;/* filled in later */
@@ -506,7 +506,8 @@ static int qset_add_urb_sg(struct whc *w }for (;p < std->num_pointers; p++, entry++) { -dev_dbg (&whc->umc->dev,"e[%d] %08x\n" , p, dma_addr); +dev_dbg (&whc->umc->dev,"e[%d] %08llx\n" , p, + (unsigned long long )dma_addr); std->pl_virt[p].buf_ptr =cpu_to_le64 (dma_addr); dma_addr = (dma_addr +WHCI_PAGE_SIZE ) & ~(WHCI_PAGE_SIZE -1 ); }
@@ -565,10 +566,10 @@ static int qset_add_urb_sg_linearize(strbreak ; } - sg_remaining =min (remaining, sg->length); + sg_remaining =min_t (size_t, remaining, sg->length); orig =sg_virt (sg); -dev_dbg (&whc->umc->dev,"adding sg[%d] %d\n" , i, sg_remaining); +dev_dbg (&whc->umc->dev,"adding sg[%d] %zu\n" , i, sg_remaining);while (sg_remaining) {if (!std || std->len == max_std_len) {
@@ -587,7 +588,7 @@ static int qset_add_urb_sg_linearize(str len =min (sg_remaining, max_std_len - std->len); -dev_dbg (&whc->umc->dev,"added %d from sg[%d] @ offset %d\n" , +dev_dbg (&whc->umc->dev,"added %zu from sg[%d] @ offset %td\n" , len, i, orig -sg_virt (sg));if (is_out)
Re: [PATCH] whci: fix type and format warnings
Quoted 3 lines · Randy Dunlap
From: Randy Dunlap <[email protected]>
Fix format and type warnings in whci driver:
I'd prefer this fixed differently. Those debug messages were left in by mistake. Randy, you want to respin this or shall I?
David
Signature · 10 lines
David Vrabel, Senior Software Engineer, Drivers CSR, Churchill House, Cambridge Business Park, Tel: +44 (0)1223 692562 Cowley Road, Cambridge, CB4 0WZ http://www.csr.com/ Member of the CSR plc group of companies. CSR plc registered in England and Wales, registered number 4187346, registered office Churchill House, Cambridge Business Park, Cowley Road, Cambridge, CB4 0WZ, United Kingdom -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] whci: fix type and format warnings
Quoted 7 lines · On Tue, 13 Oct 2009 18:51:21 +0100 David Vrabel wrote:
Quoted 3 lines · Randy Dunlap
From: Randy Dunlap <[email protected]>
Fix format and type warnings in whci driver:
I'd prefer this fixed differently. Those debug messages were left in by mistake. Randy, you want to respin this or shall I?
You can do it.
Thanks.
---
~Randy