lm-sensors 3.1.1-3 not detecting sensors on Intel DP55KG motherboard?
Hello,
# uname -a Linux box 2.6.31.3 #2 SMP Wed Oct 14 04:55:36 EDT 2009 x86_64 GNU/Linux
I have a DP55KG motherboard, it says Ibex support was added here:
http://www.lm-sensors.org/changeset/5375
# sensors No sensors found! Make sure you loaded all the kernel drivers you need. Try sensors-detect to find out which these are.
I have all of the modules compiled into the kernel and sensors-detect does not find anything.
00:1f.3 SMBus: Intel Corporation Ibex Peak SMBus Controller (rev 05)
Any ideas?
Justin.
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Quoted 13 lines · Justin Piszcz
Hello,
# uname -a Linux box 2.6.31.3 #2 SMP Wed Oct 14 04:55:36 EDT 2009 x86_64 GNU/LinuxI have a DP55KG motherboard, it says Ibex support was added here:
http://www.lm-sensors.org/changeset/5375# sensors No sensors found! Make sure you loaded all the kernel drivers you need. Try sensors-detect to find out which these are.
Quoted 9 lines
I have all of the modules compiled into the kernel and sensors-detect does not find anything.
00:1f.3 SMBus: Intel Corporation Ibex Peak SMBus Controller (rev 05)
Any ideas?
Justin.
I tried w83627ehf, to no avail:
# modprobe w83627ehf FATAL: Error inserting w83627ehf (/lib/modules/2.6.31.3/kernel/drivers/hwmon/w83627ehf.ko): No such device
Justin.
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Re: [lm-sensors] lm-sensors 3.1.1-3 not detecting sensors on Intel DP55KG motherboard? (chip ID: 0xb473)
Quoted 27 lines · Justin Piszcz
Quoted 13 lines · Justin Piszcz
Hello,
# uname -a Linux box 2.6.31.3 #2 SMP Wed Oct 14 04:55:36 EDT 2009 x86_64 GNU/LinuxI have a DP55KG motherboard, it says Ibex support was added here:
http://www.lm-sensors.org/changeset/5375# sensors No sensors found! Make sure you loaded all the kernel drivers you need. Try sensors-detect to find out which these are.Quoted 9 lines
I have all of the modules compiled into the kernel and sensors-detect does not find anything.
00:1f.3 SMBus: Intel Corporation Ibex Peak SMBus Controller (rev 05)
Any ideas?
Justin.
Quoted 7 lines
I tried w83627ehf, to no avail:
# modprobe w83627ehf FATAL: Error inserting w83627ehf (/lib/modules/2.6.31.3/kernel/drivers/hwmon/w83627ehf.ko): No such deviceJustin.
With debugging enabled:
[56208.376451] w83627ehf: unsupported chip ID: 0xb473
Is there anything else needed from me/info about the board or once this ID is added into the kernel/src/etc it will work properly?
Justin.
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Re: [lm-sensors] lm-sensors 3.1.1-3 not detecting sensors on Intel DP55KG motherboard? (chip ID: 0xb473)
Hi Justin,
Quoted 11 lines · Justin Piszcz
# uname -a Linux box 2.6.31.3 #2 SMP Wed Oct 14 04:55:36 EDT 2009 x86_64 GNU/LinuxI have a DP55KG motherboard, it says Ibex support was added here:
http://www.lm-sensors.org/changeset/5375# sensors No sensors found! Make sure you loaded all the kernel drivers you need. Try sensors-detect to find out which these are.
Quoted 6 lines
I have all of the modules compiled into the kernel and sensors-detect does not find anything.
00:1f.3 SMBus: Intel Corporation Ibex Peak SMBus Controller (rev 05)
Any ideas?
The "Ibex support" in question only refers to the SMBus controller, not to sensors directly.
Quoted 6 lines
I tried w83627ehf, to no avail:
# modprobe w83627ehf FATAL: Error inserting w83627ehf (/lib/modules/2.6.31.3/kernel/drivers/hwmon/w83627ehf.ko): No such device
Quoted 7 lines
(...)
With debugging enabled:[56208.376451] w83627ehf: unsupported chip ID: 0xb473Is there anything else needed from me/info about the board or once this ID is added into the
kernel/src/etcit will work properly?
We have never heard of this chip ID. This must be a brand new Winbond/Nuvoton Super-I/O chip. Please look at the motherboard, search for the Super-I/O and report the top marking. You may also find its name in the user manual (but the top marking is even more reliable.)
Signature · 6 lines
Jean Delvare _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Re: [lm-sensors] lm-sensors 3.1.1-3 not detecting sensors on Intel DP55KG motherboard? (chip ID: 0xb473)
Quoted 35 lines · Jean Delvare
Hi Justin,
Quoted 11 lines · Justin Piszcz
# uname -a Linux box 2.6.31.3 #2 SMP Wed Oct 14 04:55:36 EDT 2009 x86_64 GNU/LinuxI have a DP55KG motherboard, it says Ibex support was added here:
http://www.lm-sensors.org/changeset/5375# sensors No sensors found! Make sure you loaded all the kernel drivers you need. Try sensors-detect to find out which these are.Quoted 6 lines
I have all of the modules compiled into the kernel and sensors-detect does not find anything.
00:1f.3 SMBus: Intel Corporation Ibex Peak SMBus Controller (rev 05)
Any ideas?
The "Ibex support" in question only refers to the SMBus controller, not to sensors directly.
Quoted 11 lines
I tried w83627ehf, to no avail:
# modprobe w83627ehf FATAL: Error inserting w83627ehf (/lib/modules/2.6.31.3/kernel/drivers/hwmon/w83627ehf.ko): No such device(...)
With debugging enabled:[56208.376451] w83627ehf: unsupported chip ID: 0xb473
Quoted 11 lines
Quoted 2 lines
Is there anything else needed from me/info about the board or once this ID is added into the
kernel/src/etcit will work properly?We have never heard of this chip ID. This must be a brand new Winbond/Nuvoton Super-I/O chip. Please look at the motherboard, search for the Super-I/O and report the top marking. You may also find its name in the user manual (but the top marking is even more reliable.)
Signature · 1 line
Jean Delvare
Hello,
A picture of it is available here:
http://img.hexus.net/v2/cpu/intel/LGA1156/IMG_0831-big.jpg
Another:
http://www.overclockersclub.com/vimages/intel_corei5750_corei7870/20.jpg
Another:
http://www.hitechlegion.com/images/stories/ici7_870/11.jpg
A close up of the chip itself!
http://www.motherboards.org/imageview.html?i=/images/reviews/motherboards/1948_p3_13.jpg
Is this the chip to which you are referring?
Winbond
W83677HG-i
919S9BE918B001FB
919S9BE918B001FB*typed twice to confirm (same #s on two different board/reviews)
Is there anything else needed?
This site shows a close up of nearly every part of the board:
http://www.motherboards.org/reviews/motherboards/1948_3.html
Thanks,
Justin.
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Re: [lm-sensors] lm-sensors 3.1.1-3 not detecting sensors on Intel DP55KG motherboard? (chip ID: 0xb473)
Quoted 11 lines · Justin Piszcz
A picture of it is available here:
http://img.hexus.net/v2/cpu/intel/LGA1156/IMG_0831-big.jpg
Another:
http://www.overclockersclub.com/vimages/intel_corei5750_corei7870/20.jpg
Another:
http://www.hitechlegion.com/images/stories/ici7_870/11.jpg
A close up of the chip itself!
http://www.motherboards.org/imageview.html?i=/images/reviews/motherboards/1948_p3_13.jpgIs this the chip to which you are referring?
Quoted 7 lines
Winbond
W83677HG-i
919S9BE918B001FB
919S9BE918B001FB*typed twice to confirm (same #s on two different board/reviews)Is there anything else needed?
No, for now it's enough. This would indeed be a new chip, not even listed on Novoton's site yet. I'll ask our contact at Nuvoton about it.
Signature · 6 lines
Jean Delvare _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Re: [lm-sensors] lm-sensors 3.1.1-3 not detecting sensors on Intel DP55KG motherboard? (chip ID: 0xb473)
In reply to Justin PiszczQuoted 11 lines · Justin Piszcz
A picture of it is available here:
http://img.hexus.net/v2/cpu/intel/LGA1156/IMG_0831-big.jpg
Another:
http://www.overclockersclub.com/vimages/intel_corei5750_corei7870/20.jpg
Another:
http://www.hitechlegion.com/images/stories/ici7_870/11.jpg
A close up of the chip itself!
http://www.motherboards.org/imageview.html?i=/images/reviews/motherboards/1948_p3_13.jpgIs this the chip to which you are referring?
Quoted 7 lines
Winbond
W83677HG-i
919S9BE918B001FB
919S9BE918B001FB*typed twice to confirm (same #s on two different board/reviews)Is there anything else needed?
Please give a try to the latest version of sensors-detect:
http://dl.lm-sensors.org/lm-sensors/files/sensors-detect
It should find your chip now. Next step is to actually add support for it, but it will take more time and efforts.
Signature · 7 lines
Jean Delvare http://khali.linux-fr.org/wishlist.html _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Re: [lm-sensors] lm-sensors 3.1.1-3 not detecting sensors on Intel DP55KG motherboard? (chip ID: 0xb473)
Quoted 18 lines · Jean Delvare
Quoted 17 lines · Justin Piszcz
A picture of it is available here:
http://img.hexus.net/v2/cpu/intel/LGA1156/IMG_0831-big.jpg
Another:
http://www.overclockersclub.com/vimages/intel_corei5750_corei7870/20.jpg
Another:
http://www.hitechlegion.com/images/stories/ici7_870/11.jpg
A close up of the chip itself!
http://www.motherboards.org/imageview.html?i=/images/reviews/motherboards/1948_p3_13.jpgIs this the chip to which you are referring?
Winbond
W83677HG-i
919S9BE918B001FB
919S9BE918B001FB*typed twice to confirm (same #s on two different board/reviews)
Quoted 13 lines
Quoted 1 line
Is there anything else needed?
Please give a try to the latest version of sensors-detect:
http://dl.lm-sensors.org/lm-sensors/files/sensors-detect
It should find your chip now. Next step is to actually add support for it, but it will take more time and efforts.
Signature · 2 lines
Jean Delvare http://khali.linux-fr.org/wishlist.html
Hello,
Output from run:
# wget http://dl.lm-sensors.org/lm-sensors/files/sensors-detect --2009-10-16 05:48:29-- http://dl.lm-sensors.org/lm-sensors/files/sensors-detect Resolving dl.lm-sensors.org... 160.45.254.26 Connecting to dl.lm-sensors.org|160.45.254.26|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 165197 (161K) [text/plain] Saving to: `sensors-detect'
100%[===================>] 165,197 193K/s in 0.8s
2009-10-16 05:48:30 (193 KB/s) - `sensors-detect' saved [165197/165197]
# ./sensors-detect # sensors-detect revision 5782 (2009-10-16 10:59:16 +0200) # Board: Intel Corporation DP55KG
This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no):
Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 11h thermal sensors... No Intel Core family thermal sensor... No Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal and voltage sensors... No
Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... Yes
Found `Nuvoton W83677HG-I Super IO Sensors'
(but no address specified)
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... NoSome systems (mainly servers) implement IPMI, a set of common interfaces through which system health data may be retrieved, amongst other things. We first try to get the information from SMBIOS. If we don't find it there, we have to read from arbitrary I/O ports to probe for such interfaces. This is normally safe. Do you want to scan for IPMI interfaces? (YES/no):
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no):
Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No
Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no):
Found unknown SMBus adapter 8086:3b30 at 0000:00:1f.3. Sorry, no supported PCI bus adapters found.
Next adapter: SMBus I801 adapter at 7000 (i2c-0)
Do you want to scan it? (YES/no/selectively):
Client found at address 0x2c
Probing for `Myson MTP008'... No
Probing for `National Semiconductor LM78'... No
Probing for `National Semiconductor LM79'... No
Probing for `National Semiconductor LM80'... No
Probing for `National Semiconductor LM85'... No
Probing for `National Semiconductor LM96000 or PC8374L'... No
Probing for `Analog Devices ADM1027'... No
Probing for `Analog Devices ADT7460 or ADT7463'... No
Probing for `SMSC EMC6D100 or EMC6D101'... No
Probing for `SMSC EMC6D102'... No
Probing for `SMSC EMC6D103'... No
Probing for `Winbond WPCD377I'... No
Probing for `Analog Devices ADT7470'... No
Probing for `Analog Devices ADT7476'... No
Probing for `Andigilog aSC7611'... No
Probing for `Andigilog aSC7621'... No
Probing for `National Semiconductor LM87'... No
Probing for `Analog Devices ADM1024'... No
Probing for `National Semiconductor LM93'... No
Probing for `Winbond W83781D'... No
Probing for `Winbond W83782D'... No
Probing for `Winbond W83791D'... No
Probing for `Winbond W83792D'... No
Probing for `Winbond W83793R/G'... No
Probing for `Nuvoton W83795G/ADG'... No
Probing for `Winbond W83627HF'... No
Probing for `Winbond W83627EHF'... No
Probing for `Winbond W83627DHG'... No
Probing for `Asus AS99127F (rev.1)'... No
Probing for `Asus AS99127F (rev.2)'... No
Probing for `Asus ASB100 Bach'... No
Probing for `Genesys Logic GL518SM'... No
Probing for `Genesys Logic GL520SM'... No
Probing for `Analog Devices ADM9240'... No
Probing for `Dallas Semiconductor DS1780'... No
Probing for `National Semiconductor LM81'... No
Probing for `Analog Devices ADM1026'... No
Probing for `Analog Devices ADM1025'... No
Probing for `Philips NE1619'... No
Probing for `Analog Devices ADM1029'... No
Probing for `Analog Devices ADM1030'... No
Probing for `Analog Devices ADM1031'... No
Probing for `Analog Devices ADM1022'... No
Probing for `Texas Instruments THMC50'... No
Probing for `ITE IT8712F'... No
Probing for `ALi M5879'... No
Probing for `SMSC LPC47M15x/192/292/997'... No
Probing for `SMSC DME1737'... No
Probing for `SMSC SCH5027D-NW'... No
Probing for `Winbond W83791SD'... No
Client found at address 0x2d
Probing for `Myson MTP008'... No
Probing for `National Semiconductor LM78'... No
Probing for `National Semiconductor LM79'... No
Probing for `National Semiconductor LM80'... No
Probing for `National Semiconductor LM85'... No
Probing for `National Semiconductor LM96000 or PC8374L'... No
Probing for `Analog Devices ADM1027'... No
Probing for `Analog Devices ADT7460 or ADT7463'... No
Probing for `SMSC EMC6D100 or EMC6D101'... No
Probing for `SMSC EMC6D102'... No
Probing for `SMSC EMC6D103'... No
Probing for `Winbond WPCD377I'... No
Probing for `Analog Devices ADT7476'... No
Probing for `Andigilog aSC7611'... No
Probing for `Andigilog aSC7621'... No
Probing for `National Semiconductor LM87'... No
Probing for `Analog Devices ADM1024'... No
Probing for `National Semiconductor LM93'... No
Probing for `Winbond W83781D'... No
Probing for `Winbond W83782D'... No
Probing for `Winbond W83783S'... No
Probing for `Winbond W83791D'... No
Probing for `Winbond W83792D'... No
Probing for `Winbond W83793R/G'... No
Probing for `Nuvoton W83795G/ADG'... No
Probing for `Winbond W83627HF'... No
Probing for `Winbond W83627EHF'... No
Probing for `Winbond W83627DHG'... Success!
(confidence 8, driver `use-isa-instead')
Probing for `Asus AS99127F (rev.1)'... No
Probing for `Asus AS99127F (rev.2)'... No
Probing for `Asus ASB100 Bach'... No
Probing for `Winbond W83L784R/AR/G'... No
Probing for `Winbond W83L785R/G'... No
Probing for `Genesys Logic GL518SM'... No
Probing for `Genesys Logic GL520SM'... No
Probing for `Genesys Logic GL525SM'... No
Probing for `Analog Devices ADM9240'... No
Probing for `Dallas Semiconductor DS1780'... No
Probing for `National Semiconductor LM81'... No
Probing for `Analog Devices ADM1026'... No
Probing for `Analog Devices ADM1025'... No
Probing for `Philips NE1619'... No
Probing for `Analog Devices ADM1029'... No
Probing for `Analog Devices ADM1030'... No
Probing for `Analog Devices ADM1031'... No
Probing for `Analog Devices ADM1022'... No
Probing for `Texas Instruments THMC50'... No
Probing for `VIA VT1211 (I2C)'... No
Probing for `ITE IT8712F'... No
Probing for `ALi M5879'... No
Probing for `SMSC LPC47M15x/192/292/997'... No
Probing for `SMSC DME1737'... No
Probing for `SMSC SCH5027D-NW'... No
Probing for `Fintek F75373S/SG'... No
Probing for `Fintek F75375S/SP'... No
Probing for `Fintek F75387SG/RG'... No
Probing for `Winbond W83791SD'... No
Client found at address 0x48
Probing for `National Semiconductor LM75'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `National Semiconductor LM77'... No
Probing for `Dallas Semiconductor DS1621/DS1631'... No
Probing for `Maxim MAX6650/MAX6651'... No
Probing for `National Semiconductor LM73'... No
Probing for `National Semiconductor LM92'... No
Probing for `National Semiconductor LM76'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Probing for `EDID EEPROM'... No
Client found at address 0x51
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Client found at address 0x52
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Client found at address 0x53
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... NoSorry, no sensors were detected.
Either your system has no sensors, or they are not supported, or they are connected to an I2C or SMBus adapter that is not supported. If you find out what chips are on your board, check
http://www.lm-sensors.org/wiki/Devices for driver status.
#
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Re: [lm-sensors] lm-sensors 3.1.1-3 not detecting sensors on Intel DP55KG motherboard? (chip ID: 0xb473)
Quoted 5 lines · Justin Piszcz
# ./sensors-detect # sensors-detect revision 5782 (2009-10-16 10:59:16 +0200) # Board: Intel Corporation DP55KG (...) Some Super I/O chips contain embedded sensors. We have to write to
Quoted 8 lines
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... Yes
Found `Nuvoton W83677HG-I Super IO Sensors'
(but no address specified)So the LPC interface to the hardware monitoring chip is disabled.
Quoted 45 lines
Next adapter: SMBus I801 adapter at 7000 (i2c-0)
Do you want to scan it? (YES/no/selectively):
Client found at address0x2cProbing for `Myson MTP008'... No Probing for `National Semiconductor LM78'... No Probing for `National Semiconductor LM79'... No Probing for `National Semiconductor LM80'... No Probing for `National Semiconductor LM85'... No Probing for `National Semiconductor LM96000 or PC8374L'... No Probing for `Analog Devices ADM1027'... No Probing for `Analog Devices ADT7460 or ADT7463'... No Probing for `SMSC EMC6D100 or EMC6D101'... No Probing for `SMSC EMC6D102'... No Probing for `SMSC EMC6D103'... No Probing for `Winbond WPCD377I'... No Probing for `Analog Devices ADT7470'... No Probing for `Analog Devices ADT7476'... No Probing for `Andigilog aSC7611'... No Probing for `Andigilog aSC7621'... No Probing for `National Semiconductor LM87'... No Probing for `Analog Devices ADM1024'... No Probing for `National Semiconductor LM93'... No Probing for `Winbond W83781D'... No Probing for `Winbond W83782D'... No Probing for `Winbond W83791D'... No Probing for `Winbond W83792D'... No Probing for `Winbond W83793R/G'... No Probing for `Nuvoton W83795G/ADG'... No Probing for `Winbond W83627HF'... No Probing for `Winbond W83627EHF'... No Probing for `Winbond W83627DHG'... No Probing for `Asus AS99127F (rev.1)'... No Probing for `Asus AS99127F (rev.2)'... No Probing for `Asus ASB100 Bach'... No Probing for `Genesys Logic GL518SM'... No Probing for `Genesys Logic GL520SM'... No Probing for `Analog Devices ADM9240'... No Probing for `Dallas Semiconductor DS1780'... No Probing for `National Semiconductor LM81'... No Probing for `Analog Devices ADM1026'... No Probing for `Analog Devices ADM1025'... No Probing for `Philips NE1619'... No Probing for `Analog Devices ADM1029'... No Probing for `Analog Devices ADM1030'... No Probing for `Analog Devices ADM1031'... No
Quoted 8 lines
Probing for `Analog Devices ADM1022'... No Probing for `Texas Instruments THMC50'... No Probing for `ITE IT8712F'... No Probing for `ALi M5879'... No Probing for `SMSC LPC47M15x/192/292/997'... No Probing for `SMSC DME1737'... No Probing for `SMSC SCH5027D-NW'... No Probing for `Winbond W83791SD'... No
You have an unknown chip at 0x2c on the SMBus. It could be a hardware monitoring chip... or not.
If you want me to investigate this, you can provide an I2C dump of the chip. Get i2cdump from the i2c-tools package, and then:
# i2cdump 0 0x2c b
This might confuse the chip in question though, so only try it if you are ready to trigger a cold reboot.
Quoted 4 lines
Client found at address
0x2d
(...)
Probing for `Winbond W83627DHG'... Success!
(confidence 8, driver `use-isa-instead')
This is the SMBus access to the W83677HG. We don't have support for that, because LPC access is faster and was always enabled on all motherboards we've seen so far.
I doubt we'll ever add SMBus access support, for both performance and source code readability reasons. If anything, we could forcibly enable the device on your motherboard. But please first look for BIOS options and/or a BIOS update to enable the LPC interface.
Do you see any hardware monitoring information in the BIOS?
Signature · 7 lines
Jean Delvare http://khali.linux-fr.org/wishlist.html _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Re: [lm-sensors] lm-sensors 3.1.1-3 not detecting sensors on Intel DP55KG motherboard? (chip ID: 0xb473)
Quoted 7 lines · Jean Delvare
Quoted 5 lines · Justin Piszcz
# ./sensors-detect # sensors-detect revision 5782 (2009-10-16 10:59:16 +0200) Trying family `VIA/Winbond/Nuvoton/Fintek'... Yes Found `Nuvoton W83677HG-I Super IO Sensors' (but no address specified)
Quoted 6 lines
So the LPC interface to the hardware monitoring chip is disabled.
Quoted 1 line
Probing for `Winbond W83791SD'... No
You have an unknown chip at
0x2con the SMBus. It could be a hardware monitoring chip... or not.
Ok..
Quoted 8 lines
If you want me to investigate this, you can provide an I2C dump of the chip. Get i2cdump from the i2c-tools package, and then:
# i2cdump 0 0x2c bThis might confuse the chip in question though, so only try it if you are ready to trigger a cold reboot.
Ok, luckily it does not appear to have caused any issues:
# i2cdump 0 0x2c b
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0, address 0x2c, mode byte
Continue? [Y/n] y
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
10: 00 00 00 00 00 00 00 00 00 00 80 80 80 04 7e 10 ..........????~?
20: 75 51 c0 c3 c3 80 28 2d bd 0f de 0f 3b 1d a9 16 uQ????(-????;???
30: 33 4d 4d c2 81 00 c2 00 ff ff ff e6 7b fb 41 6f 3MM??.?....?{?Ao
40: 35 90 40 00 00 ff 00 ff 00 ff 00 ff 00 ff 81 7f 5?@...........??
50: 81 7f 81 7f ff ff ff ff ff ff ff ff 0a a2 a2 ca ????........????
60: 8a 8a e0 aa 33 4c 4c 5a 2d 2d 64 41 41 04 42 00 ????3LLZ--dAA?B.
70: 00 00 00 00 00 00 6c 60 f0 00 00 55 01 00 00 00 ......l`?..U?...
80: 00 00 00 00 00 00 ff ff 00 00 fb 64 64 64 00 00 ..........?ddd..
90: 00 59 59 59 00 00 00 00 00 00 00 00 00 00 00 00 .YYY............
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
#Quoted 9 lines
Quoted 5 lines
Client found at address
0x2d
(...)
Probing for `Winbond W83627DHG'... Success!
(confidence 8, driver `use-isa-instead')This is the SMBus access to the W83677HG. We don't have support for that, because LPC access is faster and was always enabled on all motherboards we've seen so far.
Ok..
Quoted 5 lines
I doubt we'll ever add SMBus access support, for both performance and source code readability reasons. If anything, we could forcibly enable the device on your motherboard. But please first look for BIOS options and/or a BIOS update to enable the LPC interface.
I am checking now...yes all HW monitoring/etc IS enabled.
Quoted 2 lines
Do you see any hardware monitoring information in the BIOS?
Yep, see note above. It is enabled.
Quoted 5 lines
Signature · 3 lines
-- Jean Delvare http://khali.linux-fr.org/wishlist.html
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Re: [lm-sensors] lm-sensors 3.1.1-3 not detecting sensors on Intel DP55KG motherboard? (chip ID: 0xb473)
Quoted 25 lines · Justin Piszcz
Quoted 7 lines · Jean Delvare
If you want me to investigate this, you can provide an I2C dump of the chip. Get i2cdump from the i2c-tools package, and then:
# i2cdump 0 0x2c bThis might confuse the chip in question though, so only try it if you are ready to trigger a cold reboot.
Ok, luckily it does not appear to have caused any issues:
# i2cdump 0 0x2c b WARNING! This program can confuse your I2C bus, cause data loss and worse! I will probe file /dev/i2c-0, address 0x2c, mode byte Continue? [Y/n] y 0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef 00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 10: 00 00 00 00 00 00 00 00 00 00 80 80 80 04 7e 10 ..........????~? 20: 75 51 c0 c3 c3 80 28 2d bd 0f de 0f 3b 1d a9 16 uQ????(-????;??? 30: 33 4d 4d c2 81 00 c2 00 ff ff ff e6 7b fb 41 6f 3MM??.?....?{?Ao 40: 35 90 40 00 00 ff 00 ff 00 ff 00 ff 00 ff 81 7f 5?@...........?? 50: 81 7f 81 7f ff ff ff ff ff ff ff ff 0a a2 a2 ca ????........???? 60: 8a 8a e0 aa 33 4c 4c 5a 2d 2d 64 41 41 04 42 00 ????3LLZ--dAA?B. 70: 00 00 00 00 00 00 6c 60 f0 00 00 55 01 00 00 00 ......l`?..U?... 80: 00 00 00 00 00 00 ff ff 00 00 fb 64 64 64 00 00 ..........?ddd..
Quoted 8 lines
90: 00 59 59 59 00 00 00 00 00 00 00 00 00 00 00 00 .YYY............ a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ #
Smells like an Analog Devices chip, but not one we know... And I can't see it on the web site you mentioned. Please search for a small-size chip named ADTxxxx (more likely ADT74xx).
Signature · 6 lines
Jean Delvare _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Re: [lm-sensors] lm-sensors 3.1.1-3 not detecting sensors on Intel DP55KG motherboard? (chip ID: 0xb473)
Quoted 26 lines · Jean Delvare
Quoted 16 lines · Justin Piszcz
Ok, luckily it does not appear to have caused any issues:
# i2cdump 0 0x2c b WARNING! This program can confuse your I2C bus, cause data loss and worse! I will probe file /dev/i2c-0, address 0x2c, mode byte Continue? [Y/n] y 0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef 00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 10: 00 00 00 00 00 00 00 00 00 00 80 80 80 04 7e 10 ..........????~? 20: 75 51 c0 c3 c3 80 28 2d bd 0f de 0f 3b 1d a9 16 uQ????(-????;??? 30: 33 4d 4d c2 81 00 c2 00 ff ff ff e6 7b fb 41 6f 3MM??.?....?{?Ao 40: 35 90 40 00 00 ff 00 ff 00 ff 00 ff 00 ff 81 7f 5?@...........?? 50: 81 7f 81 7f ff ff ff ff ff ff ff ff 0a a2 a2 ca ????........???? 60: 8a 8a e0 aa 33 4c 4c 5a 2d 2d 64 41 41 04 42 00 ????3LLZ--dAA?B. 70: 00 00 00 00 00 00 6c 60 f0 00 00 55 01 00 00 00 ......l`?..U?... 80: 00 00 00 00 00 00 ff ff 00 00 fb 64 64 64 00 00 ..........?ddd..Quoted 8 lines
90: 00 59 59 59 00 00 00 00 00 00 00 00 00 00 00 00 .YYY............ a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ #
Quoted 3 lines
Smells like an Analog Devices chip, but not one we know... And I can't see it on the web site you mentioned. Please search for a small-size chip named ADTxxxx (more likely ADT74xx).
Ah, ADT7490. Please try:
http://dl.lm-sensors.org/lm-sensors/files/sensors-detect
We don't have support for that chip, but the datasheet suggests some form of compatibility with the ADT7473 and ADT7475, which we do have support for. So support for the ADT7490 is probably not too far away.
The presence of this monitoring ASIC explains why the hardware monitoring features of the W83677HG super-I/O are disabled.
Signature · 2 lines
Jean Delvare http://khali.linux-fr.org/wishlist.html
Re: [lm-sensors] lm-sensors 3.1.1-3 not detecting sensors on Intel DP55KG motherboard? (chip ID: 0xb473)
Quoted 33 lines · Jean Delvare
Quoted 26 lines · Jean Delvare
Quoted 16 lines · Justin Piszcz
Ok, luckily it does not appear to have caused any issues:
# i2cdump 0 0x2c b WARNING! This program can confuse your I2C bus, cause data loss and worse! I will probe file /dev/i2c-0, address 0x2c, mode byte Continue? [Y/n] y 0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef 00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 10: 00 00 00 00 00 00 00 00 00 00 80 80 80 04 7e 10 ..........????~? 20: 75 51 c0 c3 c3 80 28 2d bd 0f de 0f 3b 1d a9 16 uQ????(-????;??? 30: 33 4d 4d c2 81 00 c2 00 ff ff ff e6 7b fb 41 6f 3MM??.?....?{?Ao 40: 35 90 40 00 00 ff 00 ff 00 ff 00 ff 00 ff 81 7f 5?@...........?? 50: 81 7f 81 7f ff ff ff ff ff ff ff ff 0a a2 a2 ca ????........???? 60: 8a 8a e0 aa 33 4c 4c 5a 2d 2d 64 41 41 04 42 00 ????3LLZ--dAA?B. 70: 00 00 00 00 00 00 6c 60 f0 00 00 55 01 00 00 00 ......l`?..U?... 80: 00 00 00 00 00 00 ff ff 00 00 fb 64 64 64 00 00 ..........?ddd..Quoted 8 lines
90: 00 59 59 59 00 00 00 00 00 00 00 00 00 00 00 00 .YYY............ a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ #Quoted 3 lines
Smells like an Analog Devices chip, but not one we know... And I can't see it on the web site you mentioned. Please search for a small-size chip named ADTxxxx (more likely ADT74xx).
Ah, ADT7490. Please try:
Quoted 13 lines
http://dl.lm-sensors.org/lm-sensors/files/sensors-detect
We don't have support for that chip, but the datasheet suggests some form of compatibility with the ADT7473 and ADT7475, which we do have support for. So support for the ADT7490 is probably not too far away.
The presence of this monitoring ASIC explains why the hardware monitoring features of the W83677HG super-I/O are disabled.
Signature · 2 lines
Jean Delvare http://khali.linux-fr.org/wishlist.html
Hi,
Cool.
# md5sum sensors-detect* fa620c961858c633a7bb4559e3557217 sensors-detect c7bca109121af547d2f9684174394530 sensors-detect.1
Here is the new run:
# ./sensors-detect.1 # sensors-detect revision 5785 (2009-10-16 22:21:15 +0200) # Board: Intel Corporation DP55KG
This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): YES
Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 11h thermal sensors... No Intel Core family thermal sensor... No Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal and voltage sensors... No
Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): YES Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... Yes
Found `Nuvoton W83677HG-I Super IO Sensors'
(but no address specified)
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... NoSome systems (mainly servers) implement IPMI, a set of common interfaces through which system health data may be retrieved, amongst other things. We first try to get the information from SMBIOS. If we don't find it there, we have to read from arbitrary I/O ports to probe for such interfaces. This is normally safe. Do you want to scan for IPMI interfaces? (YES/no): YES
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): YES
Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No
Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): YES Found unknown SMBus adapter 8086:3b30 at 0000:00:1f.3. Sorry, no supported PCI bus adapters found.
Next adapter: SMBus I801 adapter at 6000 (i2c-0)
Do you want to scan it? (YES/no/selectively): YES
Client found at address 0x2c
Probing for `Myson MTP008'... No
Probing for `National Semiconductor LM78'... No
Probing for `National Semiconductor LM79'... No
Probing for `National Semiconductor LM80'... No
Probing for `National Semiconductor LM85'... No
Probing for `National Semiconductor LM96000 or PC8374L'... No
Probing for `Analog Devices ADM1027'... No
Probing for `Analog Devices ADT7460 or ADT7463'... No
Probing for `SMSC EMC6D100 or EMC6D101'... No
Probing for `SMSC EMC6D102'... No
Probing for `SMSC EMC6D103'... No
Probing for `Winbond WPCD377I'... No
Probing for `Analog Devices ADT7470'... No
Probing for `Analog Devices ADT7476'... No
Probing for `Analog Devices ADT7490'... Success!
(confidence 5, driver `to-be-written')
Probing for `Andigilog aSC7611'... No
Probing for `Andigilog aSC7621'... No
Probing for `National Semiconductor LM87'... No
Probing for `Analog Devices ADM1024'... No
Probing for `National Semiconductor LM93'... No
Probing for `Winbond W83781D'... No
Probing for `Winbond W83782D'... No
Probing for `Winbond W83791D'... No
Probing for `Winbond W83792D'... No
Probing for `Winbond W83793R/G'... No
Probing for `Nuvoton W83795G/ADG'... No
Probing for `Winbond W83627HF'... No
Probing for `Winbond W83627EHF'... No
Probing for `Winbond W83627DHG/W83667HG/W83677HG'... No
Probing for `Asus AS99127F (rev.1)'... No
Probing for `Asus AS99127F (rev.2)'... No
Probing for `Asus ASB100 Bach'... No
Probing for `Genesys Logic GL518SM'... No
Probing for `Genesys Logic GL520SM'... No
Probing for `Analog Devices ADM9240'... No
Probing for `Dallas Semiconductor DS1780'... No
Probing for `National Semiconductor LM81'... No
Probing for `Analog Devices ADM1026'... No
Probing for `Analog Devices ADM1025'... No
Probing for `Philips NE1619'... No
Probing for `Analog Devices ADM1029'... No
Probing for `Analog Devices ADM1030'... No
Probing for `Analog Devices ADM1031'... No
Probing for `Analog Devices ADM1022'... No
Probing for `Texas Instruments THMC50'... No
Probing for `ITE IT8712F'... No
Probing for `ALi M5879'... No
Probing for `SMSC LPC47M15x/192/292/997'... No
Probing for `SMSC DME1737'... No
Probing for `SMSC SCH5027D-NW'... No
Probing for `Winbond W83791SD'... No
Client found at address 0x2d
Probing for `Myson MTP008'... No
Probing for `National Semiconductor LM78'... No
Probing for `National Semiconductor LM79'... No
Probing for `National Semiconductor LM80'... No
Probing for `National Semiconductor LM85'... No
Probing for `National Semiconductor LM96000 or PC8374L'... No
Probing for `Analog Devices ADM1027'... No
Probing for `Analog Devices ADT7460 or ADT7463'... No
Probing for `SMSC EMC6D100 or EMC6D101'... No
Probing for `SMSC EMC6D102'... No
Probing for `SMSC EMC6D103'... No
Probing for `Winbond WPCD377I'... No
Probing for `Analog Devices ADT7476'... No
Probing for `Analog Devices ADT7490'... No
Probing for `Andigilog aSC7611'... No
Probing for `Andigilog aSC7621'... No
Probing for `National Semiconductor LM87'... No
Probing for `Analog Devices ADM1024'... No
Probing for `National Semiconductor LM93'... No
Probing for `Winbond W83781D'... No
Probing for `Winbond W83782D'... No
Probing for `Winbond W83783S'... No
Probing for `Winbond W83791D'... No
Probing for `Winbond W83792D'... No
Probing for `Winbond W83793R/G'... No
Probing for `Nuvoton W83795G/ADG'... No
Probing for `Winbond W83627HF'... No
Probing for `Winbond W83627EHF'... No
Probing for `Winbond W83627DHG/W83667HG/W83677HG'... Success!
(confidence 8, driver `use-isa-instead')
Probing for `Asus AS99127F (rev.1)'... No
Probing for `Asus AS99127F (rev.2)'... No
Probing for `Asus ASB100 Bach'... No
Probing for `Winbond W83L784R/AR/G'... No
Probing for `Winbond W83L785R/G'... No
Probing for `Genesys Logic GL518SM'... No
Probing for `Genesys Logic GL520SM'... No
Probing for `Genesys Logic GL525SM'... No
Probing for `Analog Devices ADM9240'... No
Probing for `Dallas Semiconductor DS1780'... No
Probing for `National Semiconductor LM81'... No
Probing for `Analog Devices ADM1026'... No
Probing for `Analog Devices ADM1025'... No
Probing for `Philips NE1619'... No
Probing for `Analog Devices ADM1029'... No
Probing for `Analog Devices ADM1030'... No
Probing for `Analog Devices ADM1031'... No
Probing for `Analog Devices ADM1022'... No
Probing for `Texas Instruments THMC50'... No
Probing for `VIA VT1211 (I2C)'... No
Probing for `ITE IT8712F'... No
Probing for `ALi M5879'... No
Probing for `SMSC LPC47M15x/192/292/997'... No
Probing for `SMSC DME1737'... No
Probing for `SMSC SCH5027D-NW'... No
Probing for `Fintek F75373S/SG'... No
Probing for `Fintek F75375S/SP'... No
Probing for `Fintek F75387SG/RG'... No
Probing for `Winbond W83791SD'... No
Client found at address 0x48
Probing for `National Semiconductor LM75'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `National Semiconductor LM77'... No
Probing for `Dallas Semiconductor DS1621/DS1631'... No
Probing for `Maxim MAX6650/MAX6651'... No
Probing for `National Semiconductor LM73'... No
Probing for `National Semiconductor LM92'... No
Probing for `National Semiconductor LM76'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Probing for `EDID EEPROM'... No
Client found at address 0x51
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Client found at address 0x52
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Client found at address 0x53
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... NoNow follows a summary of the probes I have just done. Just press ENTER to continue:
Driver `to-be-written':
* Bus `SMBus I801 adapter at 6000'
Busdriver `i2c_i801', I2C address 0x2c
Chip `Analog Devices ADT7490' (confidence: 5)
Note: there is no driver for Analog Devices ADT7490 yet. Check http://www.lm-sensors.org/wiki/Devices for updates.
No modules to load, skipping modules configuration.
#
Justin.