powerpc/85xx: Fix USB GPIOs for MPC8569E-MDS boards
Subsystems (2)
PATCH 1/1 powerpc/85xx: Fix USB GPIOs for MPC8569E-MDS boards
This patch fixes USB GPIOs numbers for MPC8569E-MDS boards, plus according to the latest HW Getting Started Guide (rev 3.3, pilot boards), USB "POWER" GPIO polarity has changed, it is no longer inverted.
This patch makes USB Host somewhat work on pilot boards, though there are still some problems with determining devices speed and long bulk transfers.
--- arch/powerpc/boot/dts/mpc8569mds.dts | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
arch/powerpc/boot/dts/mpc8569mds.dts +2 -2
@@ -487,8 +487,8 @@ &qe_pio_f 5 0 /* USBTN */ &qe_pio_f 6 0 /* USBRP */ &qe_pio_f 8 0 /* USBRN */ - &bcsr17 6 0 /* SPEED */ - &bcsr17 5 1>; /* POWER */ + &bcsr17 1 0 /* SPEED */ + &bcsr17 2 0>; /* POWER */ }; enet0: ucc@2000 {
Signature · 1 line
1.6.3.3
Kumar Gala
AppliedQuoted 9 lines · Anton Vorontsov
This patch fixes USB GPIOs numbers for MPC8569E-MDS boards, plus according to the latest HW Getting Started Guide (rev 3.3, pilot boards), USB "POWER" GPIO polarity has changed, it is no longer inverted.
This patch makes USB Host somewhat work on pilot boards, though there are still some problems with determining devices speed and long bulk transfers.
Quoted 5 lines
Reported-by Liu Yu <[email protected]>Signed-off-by Anton Vorontsov <[email protected]>---
arch/powerpc/boot/dts/mpc8569mds.dts| 4 ++--1 files changed, 2 insertions(+), 2 deletions(-)
applied to merge
- k