Add sysstat tools
PATCH 1/1 Add sysstat tools
--- package/Config.in | 2 + package/sysstat/Config.in | 7 +++ .../sysstat-9.0.5-Add-install-strip-rule.patch | 54 ++++++++++++++++++++ package/sysstat/sysstat.mk | 24 +++++++++ 4 files changed, 87 insertions(+), 0 deletions(-) create mode 100644 package/sysstat/Config.in create mode 100644 package/sysstat/sysstat-9.0.5-Add-install-strip-rule.patch create mode 100644 package/sysstat/sysstat.mk
package/Config.in +2 -0
@@ -270,6 +270,7 @@ if !BR2_PACKAGE_BUSYBOX_HIDE_OTHERS source "package/sfdisk/Config.in" endif source "package/smartmontools/Config.in" +source "package/sysstat/Config.in" if !BR2_PACKAGE_BUSYBOX_HIDE_OTHERS # mdev source "package/udev/Config.in"
@@ -338,6 +339,7 @@ source "package/libglib12/Config.in" source "package/libglib2/Config.in" source "package/libgtk12/Config.in" source "package/libgtk2/Config.in" +source "package/eina/Config.in" source "package/gtk2-engines/Config.in" source "package/gtk2-themes/Config.in" source "package/libsexy/Config.in"
package/sysstat/Config.in new file +7 -0
@@ -0,0 +1,7 @@ +config BR2_PACKAGE_SYSSTAT + bool "sysstat" + help + System performance tools for the Linux operating system... + + http://pagesperso-orange.fr/sebastien.godard/ + ftp://ibiblio.org/pub/Linux/system/status/
package/sysstat/sysstat-9.0.5-Add-install-strip-rule.patch new file +54 -0
54 lines not on this page · raw message
package/sysstat/sysstat.mk new file +24 -0
@@ -0,0 +1,24 @@ +############################################################# +# +# sysstat +# +############################################################# + +SYSSTAT_VERSION = 9.0.5 +SYSSTAT_SOURCE = sysstat-$(SYSSTAT_VERSION).tar.bz2 +SYSSTAT_SITE = http://pagesperso-orange.fr/sebastien.godard/ +SYSSTAT_AUTORECONF = NO +SYSSTAT_LIBTOOL_PATCH = NO +SYSSTAT_INSTALL_STAGING = YES +SYSSTAT_INSTALL_TARGET = YES + +SYSSTAT_DEPENDENCIES = uclibc + +# Should --disable-man-group ... WTF ? +SYSSTAT_CONF_OPT = --enable-man-group + +EXPAT_INSTALL_TARGET_OPT = DESTDIR=$(TARGET_DIR) \ + INSTALL_ISAG=n \ + INSTALL_DOC=n + +$(eval $(call AUTOTARGETS,package,sysstat))
Signature · 1 line
1.6.4.3
PATCH 1/1 Add sysstat tools
Well... I mixed some patch with another and ...
Here the good one :
--
Add sysstat tools
--- package/Config.in | 1 + package/sysstat/Config.in | 7 +++ .../sysstat-9.0.5-Add-install-strip-rule.patch | 54 ++++++++++++++++++++ package/sysstat/sysstat.mk | 24 +++++++++ 4 files changed, 86 insertions(+), 0 deletions(-) create mode 100644 package/sysstat/Config.in create mode 100644 package/sysstat/sysstat-9.0.5-Add-install-strip-rule.patch create mode 100644 package/sysstat/sysstat.mk
package/Config.in +1 -0
@@ -270,6 +270,7 @@ if !BR2_PACKAGE_BUSYBOX_HIDE_OTHERS source "package/sfdisk/Config.in" endif source "package/smartmontools/Config.in" +source "package/sysstat/Config.in" if !BR2_PACKAGE_BUSYBOX_HIDE_OTHERS # mdev source "package/udev/Config.in"
package/sysstat/Config.in new file +7 -0
@@ -0,0 +1,7 @@ +config BR2_PACKAGE_SYSSTAT + bool "sysstat" + help + System performance tools for the Linux operating system... + + http://pagesperso-orange.fr/sebastien.godard/ + ftp://ibiblio.org/pub/Linux/system/status/
package/sysstat/sysstat-9.0.5-Add-install-strip-rule.patch new file +54 -0
54 lines not on this page · raw message
package/sysstat/sysstat.mk new file +24 -0
@@ -0,0 +1,24 @@ +############################################################# +# +# sysstat +# +############################################################# + +SYSSTAT_VERSION = 9.0.5 +SYSSTAT_SOURCE = sysstat-$(SYSSTAT_VERSION).tar.bz2 +SYSSTAT_SITE = http://pagesperso-orange.fr/sebastien.godard/ +SYSSTAT_AUTORECONF = NO +SYSSTAT_LIBTOOL_PATCH = NO +SYSSTAT_INSTALL_STAGING = YES +SYSSTAT_INSTALL_TARGET = YES + +SYSSTAT_DEPENDENCIES = uclibc + +# Should --disable-man-group ... WTF ? +SYSSTAT_CONF_OPT = --enable-man-group + +EXPAT_INSTALL_TARGET_OPT = DESTDIR=$(TARGET_DIR) \ + INSTALL_ISAG=n \ + INSTALL_DOC=n + +$(eval $(call AUTOTARGETS,package,sysstat))
Signature · 1 line
1.6.4.3
PATCH 1/1 Add sysstat tools
ping ?
Maybe I should add some informations about this package.
The sysstat package provides a great tool named sar, which gives informations about cpu consumption in user/system context, as well as number of page faults per seconds, or number of blocks read from devices, etc...
It's a good tool to tune performances on a system/cpu with software managed TLB (sh, mips or ppc).
Le vendredi 09 octobre 2009 ? 21:55 +0200, Lionel Landwerlin a ?crit :
Quoted 134 lines
Well... I mixed some patch with another and ...
Here the good one :
--
Add sysstat tools
Signed-off-by Lionel Landwerlin <[email protected]>--- package/Config.in | 1 + package/sysstat/Config.in | 7 +++ .../sysstat-9.0.5-Add-install-strip-rule.patch | 54 ++++++++++++++++++++ package/sysstat/sysstat.mk | 24 +++++++++ 4 files changed, 86 insertions(+), 0 deletions(-) create mode 100644 package/sysstat/Config.in create mode 100644 package/sysstat/sysstat-9.0.5-Add-install-strip-rule.patch create mode 100644 package/sysstat/sysstat.mkpackage/Config.in +1
-0@@ -270,6 +270,7 @@ if !BR2_PACKAGE_BUSYBOX_HIDE_OTHERS source "package/sfdisk/Config.in" endif source "package/smartmontools/Config.in" +source "package/sysstat/Config.in" if !BR2_PACKAGE_BUSYBOX_HIDE_OTHERS # mdev source "package/udev/Config.in"package/sysstat/Config.in new file +7
-0@@ -0,0 +1,7 @@ +config BR2_PACKAGE_SYSSTAT + bool "sysstat" + help + System performance tools for the Linux operating system... + + http://pagesperso-orange.fr/sebastien.godard/ + ftp://ibiblio.org/pub/Linux/system/status/package/sysstat/sysstat-9.0.5-Add-install-strip-rule.patch new file +54
-0@@ -0,0 +1,54 @@ +From ca95fbc6f26ab4601fe4e99ca530c9bf3b5df5aa Mon Sep 17 00:00:00 2001 +From: Lionel Landwerlin <[email protected]> +Date: Fri, 9 Oct 2009 00:01:47 +0200 +Subject: [PATCH] Add install-strip rule + +Signed-off-by: Lionel Landwerlin <[email protected]> +--- + Makefile.in | 23 ++++++++++++++++++++++- + 1 files changed, 22 insertions(+), 1 deletions(-) + +diff --git a/Makefile.in b/Makefile.in +index a54446b..6f1a0a8 100644 +--- a/Makefile.in ++++ b/Makefile.in +@@ -81,7 +81,7 @@ ifndef ZIP + ZIP = @ZIP@ + endif + +-# Settings ++# Settings + NLS = @NLS@ + ifeq ($(NLS),y) + REQUIRE_NLS = -DUSE_NLS -DPACKAGE=\"$(PACKAGE)\" -DLOCALEDIR=\"$(NLS_DIR)\" +@@ -309,6 +309,27 @@ ifdef REQUIRE_NLS + $(INSTALL_DATA) nls/zh_TW.gmo $(DESTDIR)$(NLS_DIR)/zh_TW/LC_MESSAGES/$(PACKAGE).mo + endif + ++install-strip: all sa1 sa2 contrib/isag/isag ++ mkdir -p $(DESTDIR)$(SA_LIB_DIR) ++ mkdir -p $(DESTDIR)$(SA_DIR) ++ifeq ($(CLEAN_SA_DIR),y) ++ find $(DESTDIR)$(SA_DIR) \( -name 'sar??' -o -name 'sa??' -o -name 'sar??.gz' -o -name 'sa??.gz' \) \ ++ -exec rm -f {} \; ++ -rmdir --ignore-fail-on-non-empty $(DESTDIR)$(SA_DIR)/[0-9]????? ++endif ++ mkdir -p $(DESTDIR)$(BIN_DIR) ++ mkdir -p $(DESTDIR)$(SYSCONFIG_DIR) ++ $(INSTALL_BIN) sa1 $(DESTDIR)$(SA_LIB_DIR) ++ $(INSTALL_BIN) sa2 $(DESTDIR)$(SA_LIB_DIR) ++ $(INSTALL_BIN) sadc $(DESTDIR)$(SA_LIB_DIR) ++ $(INSTALL_BIN) sar $(DESTDIR)$(BIN_DIR) ++ $(INSTALL_BIN) sadf $(DESTDIR)$(BIN_DIR) ++ $(INSTALL_BIN) iostat $(DESTDIR)$(BIN_DIR) ++ $(INSTALL_BIN) mpstat $(DESTDIR)$(BIN_DIR) ++ $(INSTALL_BIN) pidstat $(DESTDIR)$(BIN_DIR) ++ $(INSTALL_DATA) sysstat.ioconf $(DESTDIR)$(SYSCONFIG_DIR) ++ $(INSTALL_DATA) sysstat.sysconfig $(DESTDIR)$(SYSCONFIG_DIR)/sysstat ++ + install_base: all sa1 sa2 sysstat.sysconfig install_man install_nls \ + contrib/isag/isag + mkdir -p $(DESTDIR)$(SA_LIB_DIR) +-- +1.6.4.3 +package/sysstat/sysstat.mk new file +24
-0@@ -0,0 +1,24 @@ +############################################################# +# +# sysstat +# +############################################################# + +SYSSTAT_VERSION = 9.0.5 +SYSSTAT_SOURCE = sysstat-$(SYSSTAT_VERSION).tar.bz2 +SYSSTAT_SITE = http://pagesperso-orange.fr/sebastien.godard/ +SYSSTAT_AUTORECONF = NO +SYSSTAT_LIBTOOL_PATCH = NO +SYSSTAT_INSTALL_STAGING = YES +SYSSTAT_INSTALL_TARGET = YES + +SYSSTAT_DEPENDENCIES = uclibc + +# Should --disable-man-group ... WTF ? +SYSSTAT_CONF_OPT = --enable-man-group + +EXPAT_INSTALL_TARGET_OPT = DESTDIR=$(TARGET_DIR) \ + INSTALL_ISAG=n \ + INSTALL_DOC=n + +$(eval $(call AUTOTARGETS,package,sysstat))
PATCH 1/1 Add sysstat tools
Quoted 11 lines · Lionel Landwerlin
ping ?
Maybe I should add some informations about this package.
The sysstat package provides a great tool named sar, which gives informations about cpu consumption in user/system context, as well as number of page faults per seconds, or number of blocks read from devices, etc...
It's a good tool to tune performances on a system/cpu with software managed TLB (sh, mips or ppc).
Quoted 7 lines
package/sysstat/Config.in line 4
Quoted 7 lines
package/sysstat/Config.in new file +4
-0@@ -0,0 +1,7 @@ +config BR2_PACKAGE_SYSSTAT + bool "sysstat" + help + System performance tools for the Linux operating system...
too many dots. Perhaps put your expanded description in here too.
Quoted 5 lines
package/sysstat/sysstat-9.0.5-Add-install-strip-rule.patch
Quoted 5 lines
package/sysstat/sysstat-9.0.5-Add-install-strip-rule.patch new file +0
-0
You sent this to upstream already, yes?
Quoted 13 lines
Quoted 13 lines
package/sysstat/sysstat.mk new file +7
-0@@ -0,0 +1,24 @@ +############################################################# +# +# sysstat +# +############################################################# + +SYSSTAT_VERSION = 9.0.5
Quoted 8 lines
package/sysstat/sysstat.mk line 15
Quoted 8 lines
package/sysstat/sysstat.mk new file +8
-0+SYSSTAT_SOURCE = sysstat-$(SYSSTAT_VERSION).tar.bz2 +SYSSTAT_SITE = http://pagesperso-orange.fr/sebastien.godard/ +SYSSTAT_AUTORECONF = NO +SYSSTAT_LIBTOOL_PATCH = NO +SYSSTAT_INSTALL_STAGING = YES +SYSSTAT_INSTALL_TARGET = YES + +SYSSTAT_DEPENDENCIES = uclibc
Every mention of uclibc as dependency of package/* is wrong (since uclibc and the cross compiler et al are already deps for any target package).
Quoted 7 lines
package/sysstat/sysstat.mk line 22
Quoted 7 lines
package/sysstat/sysstat.mk new file +7
-0+ +# Should --disable-man-group ... WTF ? +SYSSTAT_CONF_OPT = --enable-man-group + +EXPAT_INSTALL_TARGET_OPT = DESTDIR=$(TARGET_DIR) \ + INSTALL_ISAG=n \ + INSTALL_DOC=n
what's ISAG ?INSTALL_DOC would be yes if BR2_HAVE_DOCUMENTATION. $(if $(BR2_HAVE_DOCUMENTATION),,INSTALL_DOC=n)
thanks,
PATCH 1/1 Add sysstat tools
Hi Bernhard,
Thanks a lot for reviewing my patch. I made some correction following your review :
* The description has been completed (from the sysstat website).
* I rebased my patch on the last git revision and the install-strip rule doesn't seem required anymore, so I removed the patch.
* Removed dependency on uclibc.
* Filled INSTALL_DOC according to BR2_HAVE_DOCUMENTATION.
* And last, INSTALL_ISAG is set to 'n' to avoid the isag script installation which is a postprocessing script depending on tcl/tk.
Maybe later I will add the rules for host installation, but it doesn't look like a high priority to me.
Here is a new patch :
[PATCH] Add sysstat tools
--- package/Config.in | 3 ++- package/sysstat/Config.in | 40 ++++++++++++++++++++++++++++++++++++++++ package/sysstat/sysstat.mk | 26 ++++++++++++++++++++++++++ 3 files changed, 68 insertions(+), 1 deletions(-) create mode 100644 package/sysstat/Config.in create mode 100644 package/sysstat/sysstat.mk
package/Config.in +2 -1
@@ -270,7 +270,8 @@ if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS source "package/sfdisk/Config.in" endif source "package/smartmontools/Config.in" -if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS +source "package/sysstat/Config.in" +if BR2_PACKAGE_BUSYBOX_HIDE_OTHERS # mdev source "package/udev/Config.in" endif
package/sysstat/Config.in new file +40 -0
@@ -0,0 +1,40 @@ +config BR2_PACKAGE_SYSSTAT + bool "sysstat" + help + The sysstat utilities are a collection of performance + monitoring tools for Linux. These include sar, sadf, mpstat, + iostat, pidstat and sa tools. + + Some Features : + + * Input / Output and transfer rate statistics (global, per + device, per partition, per network filesystem and per + Linux task / PID) + * CPU statistics (global, per CPU and per Linux task / + PID), including support for virtualization architectures + * Memory and swap space utilization statistics + * Virtual memory, paging and fault statistics + * Per-task (per-PID) memory and page fault statistics + * Global CPU and page fault statistics for tasks and all + their children + * Process creation activity + * Interrupt statistics (global, per CPU and per interrupt, + including potential APIC interrupt sources) + * Extensive network statistics: network interface activity + (number of packets and kB received and transmitted per + second, etc.) including failures from network devices; + network traffic statistics for IP, TCP, ICMP and UDP + protocols based on SNMPv2 standards; support for + IPv6-related protocols. + * NFS server and client activity + * Socket statistics + * Run queue and system load statistics + * Kernel internal tables utilization statistics + * System and per Linux task switching activity + * Swapping statistics + * TTY device activity + * Power management statistics + + + http://pagesperso-orange.fr/sebastien.godard/ + ftp://ibiblio.org/pub/Linux/system/status/
package/sysstat/sysstat.mk new file +26 -0
@@ -0,0 +1,26 @@ +############################################################# +# +# sysstat +# +############################################################# + +SYSSTAT_VERSION = 9.0.5 +SYSSTAT_SOURCE = sysstat-$(SYSSTAT_VERSION).tar.bz2 +SYSSTAT_SITE = http://pagesperso-orange.fr/sebastien.godard/ +SYSSTAT_AUTORECONF = NO +SYSSTAT_LIBTOOL_PATCH = NO +SYSSTAT_INSTALL_STAGING = YES +SYSSTAT_INSTALL_TARGET = YES + +# Should be --disable-man-group, it might be a little mistake in the +# configure.in script. +SYSSTAT_CONF_OPT = --enable-man-group +ifneq ($(BR2_HAVE_DOCUMENTATION),y) +SYSSTAT_CONF_OPT += --disable-documentation +endif + +# The isag tool is a post processing script that depends on tcl/tk +# among other things. So we don't install it. +SYSSTAT_INSTALL_TARGET_OPT = DESTDIR=$(TARGET_DIR) INSTALL_ISAG=n + +$(eval $(call AUTOTARGETS,package,sysstat))
Signature · 1 line
1.6.4.3
PATCH 1/1 Add sysstat tools
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Lionel" == Lionel Landwerlin <[email protected]> writes:
Lionel> Hi Bernhard,
Lionel> Thanks a lot for reviewing my patch. I made some correction following Lionel> your review :
Lionel> * The description has been completed (from the sysstat website).
Lionel> * I rebased my patch on the last git revision and the
Lionel> install-strip rule doesn't seem required anymore, so I removed
Lionel> the patch.
Lionel> * Removed dependency on uclibc. Lionel> * Filled INSTALL_DOC according to BR2_HAVE_DOCUMENTATION. Lionel> * And last, INSTALL_ISAG is set to 'n' to avoid the isag script
Lionel> installation which is a postprocessing script depending on
Lionel> tcl/tk.
Thanks, committed. There were still a few minor issues, but I've fixed those myself.
Lionel> Maybe later I will add the rules for host installation, but it doesn't Lionel> look like a high priority to me.
Lionel> Here is a new patch :
Lionel> [PATCH] Add sysstat tools
Lionel> Signed-off-by: Lionel Landwerlin <[email protected]> Lionel> ---
Lionel> package/Config.in | 3 ++- Lionel> package/sysstat/Config.in | 40 ++++++++++++++++++++++++++++++++++++++++ Lionel> package/sysstat/sysstat.mk | 26 ++++++++++++++++++++++++++ Lionel> 3 files changed, 68 insertions(+), 1 deletions(-) Lionel> create mode 100644 package/sysstat/Config.in Lionel> create mode 100644 package/sysstat/sysstat.mk
Lionel> diff --git a/package/Config.in b/package/Config.in Lionel> index ff7fc3d..aa02d2b 100644
Lionel> --- a/package/Config.in
Lionel> +++ b/package/Config.in
Lionel> @@ -270,7 +270,8 @@ if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
Lionel> source "package/sfdisk/Config.in" Lionel> endif Lionel> source "package/smartmontools/Config.in"
Lionel> -if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
Lionel> +source "package/sysstat/Config.in"
Lionel> +if BR2_PACKAGE_BUSYBOX_HIDE_OTHERS
Don't change SHOW_OTHERS to HIDE_OTHERS.
Lionel> +
Lionel> + http://pagesperso-orange.fr/sebastien.godard/
Lionel> + ftp://ibiblio.org/pub/Linux/system/status/
One URL should be enough.
Lionel> +SYSSTAT_SOURCE = sysstat-$(SYSSTAT_VERSION).tar.bz2 Lionel> +SYSSTAT_SITE = http://pagesperso-orange.fr/sebastien.godard/
Lionel> +SYSSTAT_AUTORECONF = NO
Lionel> +SYSSTAT_LIBTOOL_PATCH = NO
Lionel> +SYSSTAT_INSTALL_STAGING = YES
sysstat is a collection of programs, not a library - So there afaik isn't any reason to install into staging.
Lionel> +SYSSTAT_INSTALL_TARGET = YES
Lionel> +
Lionel> +# Should be --disable-man-group, it might be a little mistake in the Lionel> +# configure.in script.
Lionel> +SYSSTAT_CONF_OPT = --enable-man-group
Lionel> +ifneq ($(BR2_HAVE_DOCUMENTATION),y)
Lionel> +SYSSTAT_CONF_OPT += --disable-documentation
Lionel> +endif
Lionel> +
Lionel> +# The isag tool is a post processing script that depends on tcl/tk Lionel> +# among other things. So we don't install it.
Lionel> +SYSSTAT_INSTALL_TARGET_OPT = DESTDIR=$(TARGET_DIR) INSTALL_ISAG=n
You are forgetting to add a make target (E.G. install), so nothing will get installed.
Signature · 1 line
Bye, Peter Korsgaard