Skip to contentSkip to conversation

libertas: move association & scan-related away

PATCH New Holger Schurig 1 participant 1 message Oct 19, 2009 Networking drivers (wireless)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 libertas: move association & scan-related away

Another cfg80211-preparation patch: removes some code/definitions from main.c and dev.h and put's it into assoc.c/.h, scan.c/.h.

No functional change.

drivers/net/wireless/libertas/dev.h +2 -153
@@ -6,75 +6,10 @@
 #ifndef _LBS_DEV_H_
 #define _LBS_DEV_H_
 
-#include <linux/netdevice.h>
-#include <linux/wireless.h>
-#include <linux/ethtool.h>
-#include <linux/debugfs.h>
+#include "scan.h"
+#include "assoc.h"
 
-#include "defs.h"
-#include "host.h"
 
-extern const struct ethtool_ops lbs_ethtool_ops;
-
-#define	MAX_BSSID_PER_CHANNEL		16
-
-#define NR_TX_QUEUE			3
-
-/* For the extended Scan */
-#define MAX_EXTENDED_SCAN_BSSID_LIST    MAX_BSSID_PER_CHANNEL * \
-						MRVDRV_MAX_CHANNEL_SIZE + 1
-
-#define	MAX_REGION_CHANNEL_NUM	2
-
-/** Chan-freq-TxPower mapping table*/
-struct chan_freq_power {
-	/** channel Number		*/
-	u16 channel;
-	/** frequency of this channel	*/
-	u32 freq;
-	/** Max allowed Tx power level	*/
-	u16 maxtxpower;
-	/** TRUE:channel unsupported;  FLASE:supported*/
-	u8 unsupported;
-};
-
-/** region-band mapping table*/
-struct region_channel {
-	/** TRUE if this entry is valid		     */
-	u8 valid;
-	/** region code for US, Japan ...	     */
-	u8 region;
-	/** band B/G/A, used for BAND_CONFIG cmd	     */
-	u8 band;
-	/** Actual No. of elements in the array below */
-	u8 nrcfp;
-	/** chan-freq-txpower mapping table*/
-	struct chan_freq_power *CFP;
-};
-
-struct lbs_802_11_security {
-	u8 WPAenabled;
-	u8 WPA2enabled;
-	u8 wep_enabled;
-	u8 auth_mode;
-	u32 key_mgmt;
-};
-
-/** Current Basic Service Set State Structure */
-struct current_bss_params {
-	/** bssid */
-	u8 bssid[ETH_ALEN];
-	/** ssid */
-	u8 ssid[IEEE80211_MAX_SSID_LEN + 1];
-	u8 ssid_len;
-
-	/** band */
-	u8 band;
-	/** channel */
-	u8 channel;
-	/** zero-terminated array of supported data rates */
-	u8 rates[MAX_RATES + 1];
-};
 
 /** sleep_params */
 struct sleep_params {
@@ -295,12 +230,6 @@
 	struct enc_key wpa_mcast_key;
 	struct enc_key wpa_unicast_key;
 
-/*
- * In theory, the IE is limited to the IE length, 255,
- * but in practice 64 bytes are enough.
- */
-#define MAX_WPA_IE_LEN 64
-
 	/** WPA Information Elements*/
 	u8 wpa_ie[MAX_WPA_IE_LEN];
 	u8 wpa_ie_len;
@@ -334,84 +263,4 @@
 
 extern struct cmd_confirm_sleep confirm_sleep;
 
-/**
- *  @brief Structure used to store information for each beacon/probe response
- */
-struct bss_descriptor {
-	u8 bssid[ETH_ALEN];
-
-	u8 ssid[IEEE80211_MAX_SSID_LEN + 1];
-	u8 ssid_len;
-
-	u16 capability;
-	u32 rssi;
-	u32 channel;
-	u16 beaconperiod;
-	__le16 atimwindow;
-
-	/* IW_MODE_AUTO, IW_MODE_ADHOC, IW_MODE_INFRA */
-	u8 mode;
-
-	/* zero-terminated array of supported data rates */
-	u8 rates[MAX_RATES + 1];
-
-	unsigned long last_scanned;
-
-	union ieee_phy_param_set phy;
-	union ieee_ss_param_set ss;
-
-	u8 wpa_ie[MAX_WPA_IE_LEN];
-	size_t wpa_ie_len;
-	u8 rsn_ie[MAX_WPA_IE_LEN];
-	size_t rsn_ie_len;
-
-	u8 mesh;
-
-	struct list_head list;
-};
-
-/** Association request
- *
- * Encapsulates all the options that describe a specific assocation request
- * or configuration of the wireless card's radio, mode, and security settings.
- */
-struct assoc_request {
-#define ASSOC_FLAG_SSID			1
-#define ASSOC_FLAG_CHANNEL		2
-#define ASSOC_FLAG_BAND			3
-#define ASSOC_FLAG_MODE			4
-#define ASSOC_FLAG_BSSID		5
-#define ASSOC_FLAG_WEP_KEYS		6
-#define ASSOC_FLAG_WEP_TX_KEYIDX	7
-#define ASSOC_FLAG_WPA_MCAST_KEY	8
-#define ASSOC_FLAG_WPA_UCAST_KEY	9
-#define ASSOC_FLAG_SECINFO		10
-#define ASSOC_FLAG_WPA_IE		11
-	unsigned long flags;
-
-	u8 ssid[IEEE80211_MAX_SSID_LEN + 1];
-	u8 ssid_len;
-	u8 channel;
-	u8 band;
-	u8 mode;
-	u8 bssid[ETH_ALEN] __attribute__ ((aligned (2)));
-
-	/** WEP keys */
-	struct enc_key wep_keys[4];
-	u16 wep_tx_keyidx;
-
-	/** WPA keys */
-	struct enc_key wpa_mcast_key;
-	struct enc_key wpa_unicast_key;
-
-	struct lbs_802_11_security secinfo;
-
-	/** WPA Information Elements*/
-	u8 wpa_ie[MAX_WPA_IE_LEN];
-	u8 wpa_ie_len;
-
-	/* BSS to associate with for infrastructure of Ad-Hoc join */
-	struct bss_descriptor bss;
-};
-
 #endif
drivers/net/wireless/libertas/assoc.c +7 -0
@@ -23,6 +23,13 @@
  */
 #define CAPINFO_MASK	(~(0xda00))
 
+/**
+ * 802.11b/g supported bitrates (in 500Kb/s units)
+ */
+u8 lbs_bg_rates[MAX_RATES] =
+    { 0x02, 0x04, 0x0b, 0x16, 0x0c, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6c,
+0x00, 0x00 };
+
 
 /**
  *  @brief This function finds common rates between rates and card rates.
drivers/net/wireless/libertas/assoc.h +121 -1

128 lines not on this page · raw message

drivers/net/wireless/libertas/cmd.c +1 -0
@@ -13,6 +13,7 @@
 #include "dev.h"
 #include "assoc.h"
 #include "wext.h"
+#include "scan.h"
 #include "cmd.h"
 
 static struct cmd_ctrl_node *lbs_get_cmd_ctrl_node(struct lbs_private *priv);
drivers/net/wireless/libertas/decl.h +3 -3
@@ -10,6 +10,9 @@
 
 #include "defs.h"
 
+
+extern const struct ethtool_ops lbs_ethtool_ops;
+
 /** Function Prototype Declaration */
 struct lbs_private;
 struct sk_buff;
@@ -33,7 +36,6 @@
 /** The proc fs interface */
 netdev_tx_t lbs_hard_start_xmit(struct sk_buff *skb,
 				struct net_device *dev);
-int lbs_set_regiontable(struct lbs_private *priv, u8 region, u8 band);
 
 int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *);
 
@@ -49,8 +51,6 @@
 void lbs_persist_config_remove(struct net_device *net);
 
 /* main.c */
-struct chan_freq_power *lbs_get_region_cfp_table(u8 region,
-	int *cfp_no);
 struct lbs_private *lbs_add_card(void *card, struct device *dmdev);
 void lbs_remove_card(struct lbs_private *priv);
 int lbs_start_card(struct lbs_private *priv);
drivers/net/wireless/libertas/defs.h +0 -1
@@ -322,7 +322,6 @@
 extern const char lbs_driver_version[];
 extern u16 lbs_region_code_to_index[MRVDRV_MAX_REGION_CODE];
 
-extern u8 lbs_bg_rates[MAX_RATES];
 
 /** ENUM definition*/
 /** SNRNF_TYPE */
drivers/net/wireless/libertas/main.c +0 -182

200 lines not on this page · raw message

drivers/net/wireless/libertas/scan.c +184 -0

196 lines not on this page · raw message

drivers/net/wireless/libertas/scan.h +30 -0
@@ -9,8 +9,36 @@
 
 #include <net/iw_handler.h>
 
+struct lbs_private;
+
 #define MAX_NETWORK_COUNT 128
 
+/** Chan-freq-TxPower mapping table*/
+struct chan_freq_power {
+	/** channel Number		*/
+	u16 channel;
+	/** frequency of this channel	*/
+	u32 freq;
+	/** Max allowed Tx power level	*/
+	u16 maxtxpower;
+	/** TRUE:channel unsupported;  FLASE:supported*/
+	u8 unsupported;
+};
+
+/** region-band mapping table*/
+struct region_channel {
+	/** TRUE if this entry is valid		     */
+	u8 valid;
+	/** region code for US, Japan ...	     */
+	u8 region;
+	/** band B/G/A, used for BAND_CONFIG cmd	     */
+	u8 band;
+	/** Actual No. of elements in the array below */
+	u8 nrcfp;
+	/** chan-freq-txpower mapping table*/
+	struct chan_freq_power *CFP;
+};
+
 /**
  *  @brief Maximum number of channels that can be sent in a setuserscan ioctl
  */
@@ -18,6 +46,8 @@
 
 int lbs_ssid_cmp(u8 *ssid1, u8 ssid1_len, u8 *ssid2, u8 ssid2_len);
 
+int lbs_set_regiontable(struct lbs_private *priv, u8 region, u8 band);
+
 int lbs_send_specific_ssid_scan(struct lbs_private *priv, u8 *ssid,
 				u8 ssid_len);
 
Signature · 1 line
http://www.holgerschurig.de