cr: debug: define ckpt_error()
PATCH 1/3 cr: debug: define ckpt_error()
For starters it just amounts to a _ckpt_debug(CKPT_ERR), and has no callers.
--- include/linux/checkpoint.h | 10 ++++++++++ 1 files changed, 10 insertions(+), 0 deletions(-)
include/linux/checkpoint.h +10 -0
@@ -330,6 +330,7 @@ static inline int ckpt_validate_errno(int errno)#define CKPT_DMEM 0x20/* memory state */ #define CKPT_DPAGE 0x40/* memory pages */ #define CKPT_DIPC 0x80/* sysvipc */ +#define CKPT_ERR 0x100/* error */ #define CKPT_DDEFAULT 0xffff/* default debug level */
@@ -370,6 +371,15 @@ static inline void restore_debug_free(struct ckpt_ctx *ctx) {}#endif /* CONFIG_CHECKPOINT_DEBUG */ +#define ckpt_log_error(ctx, fmt, args...) do { } while (0) + +#define ckpt_error(ctx, fmt, args...) \ + do { \ + ckpt_log_error(ctx, "%s:%d " fmt, __func__, __LINE__, \ + ## args); \ + _ckpt_debug(CKPT_ERR, fmt, ## args); \ + } while (0) +#endif /* CONFIG_CHECKPOINT */ #endif /* __KERNEL__ */
Signature · 1 line
1.6.1
A message that is not in the archive (sent off-list or not yet received): 20091023041325.GA2863-r/[email protected]
PATCH 2/3 define function to print error messages to user log
Error messages are both sent to an optional user-provided logfile, and, if CONFIG_CHECKPOINT_DEBUG=y, sent to syslog.
--- checkpoint/objhash.c | 2 + checkpoint/sys.c | 61 ++++++++++++++++++++++++++++++++++--- include/linux/checkpoint.h | 2 +- include/linux/checkpoint_types.h | 1 + include/linux/syscalls.h | 5 ++- 5 files changed, 63 insertions(+), 8 deletions(-)
checkpoint/objhash.c +2 -0
@@ -858,6 +858,8 @@ int ckpt_obj_contained(struct ckpt_ctx *ctx)/* account for ctx->file reference (if in the table already) */ ckpt_obj_users_inc (ctx, ctx->file,1 ); +if (ctx->logfile) +ckpt_obj_users_inc (ctx, ctx->logfile,1 );/* account for ctx->root_nsproxy reference (if in the table already) */ ckpt_obj_users_inc (ctx, ctx->root_nsproxy,1 );
checkpoint/sys.c +56 -5
109 lines not on this page · raw message
include/linux/checkpoint.h +1 -1
@@ -371,7 +371,7 @@ static inline void restore_debug_free(struct ckpt_ctx *ctx) {}#endif /* CONFIG_CHECKPOINT_DEBUG */ -#define ckpt_log_error(ctx, fmt, args...) do { } while (0) +extern void ckpt_log_error (struct ckpt_ctx *ctx,char *fmt, ...); #define ckpt_error(ctx, fmt, args...) \ do { \
include/linux/checkpoint_types.h +1 -0
@@ -48,6 +48,7 @@ struct ckpt_ctx {unsigned long oflags;/* restart: uflags from checkpoint */ struct file *file;/* input/output file */ +struct file *logfile;/* debug log file */ int total;/* total read/written */ atomic_t refcount;
include/linux/syscalls.h +3 -2
@@ -754,8 +754,9 @@ asmlinkage long sys_pselect6(int, fd_set __user *, fd_set __user *,asmlinkage long sys_ppoll (struct pollfd __user *,unsigned int ,struct timespec __user *,const sigset_t __user *,size_t ); -asmlinkage long sys_checkpoint (pid_t pid,int fd,unsigned long flags); -asmlinkage long sys_restart (pid_t pid,int fd,unsigned long flags); +asmlinkage long sys_checkpoint (pid_t pid,int fd,unsigned long flags, +int logfd); +asmlinkage long sys_restart (pid_t pid,int fd,unsigned long flags,int logfd);int kernel_execve (const char *filename,char *const argv[],char *const envp[]);
Signature · 1 line
1.6.1
A message that is not in the archive (sent off-list or not yet received): 20091023041349.GA2915-r/[email protected]
Re: [PATCH 2/3] define function to print error messages to user log
Quoted 48 lines · Serge E. Hallyn
Error messages are both sent to an optional user-provided logfile, and, if
CONFIG_CHECKPOINT_DEBUG=y, sent to syslog.Signed-off-by Serge E. Hallyn <serue-r/[email protected]>--- checkpoint/objhash.c | 2 + checkpoint/sys.c | 61 ++++++++++++++++++++++++++++++++++--- include/linux/checkpoint.h | 2 +- include/linux/checkpoint_types.h | 1 + include/linux/syscalls.h | 5 ++- 5 files changed, 63 insertions(+), 8 deletions(-)checkpoint/objhash.c +2
-0@@ -858,6 +858,8 @@ int ckpt_obj_contained(struct ckpt_ctx *ctx)/* account for ctx->file reference (if in the table already) */ ckpt_obj_users_inc (ctx, ctx->file,1 ); +if (ctx->logfile) +ckpt_obj_users_inc (ctx, ctx->logfile,1 );/* account for ctx->root_nsproxy reference (if in the table already) */ ckpt_obj_users_inc (ctx, ctx->root_nsproxy,1 );checkpoint/sys.c +3
-1@@ -204,6 +204,8 @@ static void ckpt_ctx_free(struct ckpt_ctx *ctx)if (ctx->file)fput (ctx->file); +if (ctx->logfile) +fput (ctx->logfile);ckpt_obj_hash_free (ctx);path_put (&ctx->fs_mnt);@@ -225,7 +227,7 @@ static void ckpt_ctx_free(struct ckpt_ctx *ctx) }static struct ckpt_ctx *ckpt_ctx_alloc (int fd,unsigned long uflags, -unsigned long kflags) +unsigned long kflags,int logfd) {struct ckpt_ctx *ctx;int err;
checkpoint/sys.c static struct ckpt_ctx *ckpt_ctx_alloc(int fd, unsigned long uflags, · line 244
Quoted 5 lines
checkpoint/sys.c +2
-0@@ -238,6 +240,9 @@ static struct ckpt_ctx *ckpt_ctx_alloc(int fd, unsigned long uflags, ctx->kflags = kflags; ctx->ktime_begin =ktime_get (); +/* If logfd's a bad fd that's fine, no log output required... */ + ctx->logfile =fget (logfd);
Can we make it more user-friendly, e.g. f logfd==-1 then no logfile, otherwise if fget(logfd) fails then return -EBADF ?
checkpoint/sys.c int walk_task_subtree(struct task_struct *root, · line 351
Quoted 13 lines
checkpoint/sys.c +6
-0+atomic_set (&ctx->refcount,0 );INIT_LIST_HEAD (&ctx->pgarr_list);INIT_LIST_HEAD (&ctx->pgarr_pool);@@ -339,6 +344,51 @@ int walk_task_subtree(struct task_struct *root,return (ret <0 ? ret : total); } +/* +* currentpid:targetpid fmt%args +*/ +void ckpt_log_error (struct ckpt_ctx *ctx,char *fmt, ...) +{
As I commented before, I really wish not to go through this again. Can we come up with a mechanism for error messages, that will set a "standard" format (like I tried to do in ckpt_write_err) ?
(I like Matt's suggestion to use one format string instead of two, and allow "%(T)" constructs for our format directives).
Also, I assume some of that code can be reused here below.
Quoted 30 lines
checkpoint/sys.c +30
-0+mm_segment_t fs; +struct file *file; +int count; +char buf[200 ], *bufp = buf; +int mypid = current->pid; +int tpid = current->nsproxy ?task_pid_vnr (current) :-1 ; +va_list args; + +if (!ctx || !ctx->logfile) +return ; + file = ctx->logfile; + + count =snprintf (buf,200 ,"%d:%d " , mypid, tpid); +if (count >200 ) +return ;/* not possible */ + fs =get_fs (); +set_fs (KERNEL_DS ); +_ckpt_kwrite (file, bufp, count); +set_fs (fs); + +va_start (args, fmt); + count =vsnprintf (bufp,200 , fmt, args); +va_end (args); +if (count >200 ) { + bufp =kmalloc (count,GFP_KERNEL ); +if (!bufp) +return ; +va_start (args, fmt); +vsnprintf (bufp, count, fmt, args); +va_end (args);
checkpoint/sys.c int walk_task_subtree(struct task_struct *root, · line 391
Quoted 10 lines
checkpoint/sys.c +10
-0+ } + + fs =get_fs (); +set_fs (KERNEL_DS ); +_ckpt_kwrite (file, bufp, count); +set_fs (fs); + +if (bufp != buf) +kfree (bufp); +}
The rest looks ok.
Oren.
A message that is not in the archive (sent off-list or not yet received): [email protected]
Re: [PATCH 2/3] define function to print error messages to user log
Quoted 78 lines · Oren Laadan
Quoted 48 lines · Serge E. Hallyn
Error messages are both sent to an optional user-provided logfile, and, if
CONFIG_CHECKPOINT_DEBUG=y, sent to syslog.Signed-off-by Serge E. Hallyn <serue-r/[email protected]>--- checkpoint/objhash.c | 2 + checkpoint/sys.c | 61 ++++++++++++++++++++++++++++++++++--- include/linux/checkpoint.h | 2 +- include/linux/checkpoint_types.h | 1 + include/linux/syscalls.h | 5 ++- 5 files changed, 63 insertions(+), 8 deletions(-)checkpoint/objhash.c +2
-0@@ -858,6 +858,8 @@ int ckpt_obj_contained(struct ckpt_ctx *ctx)/* account for ctx->file reference (if in the table already) */ ckpt_obj_users_inc (ctx, ctx->file,1 ); +if (ctx->logfile) +ckpt_obj_users_inc (ctx, ctx->logfile,1 );/* account for ctx->root_nsproxy reference (if in the table already) */ ckpt_obj_users_inc (ctx, ctx->root_nsproxy,1 );checkpoint/sys.c +3
-1@@ -204,6 +204,8 @@ static void ckpt_ctx_free(struct ckpt_ctx *ctx)if (ctx->file)fput (ctx->file); +if (ctx->logfile) +fput (ctx->logfile);ckpt_obj_hash_free (ctx);path_put (&ctx->fs_mnt);@@ -225,7 +227,7 @@ static void ckpt_ctx_free(struct ckpt_ctx *ctx) }static struct ckpt_ctx *ckpt_ctx_alloc (int fd,unsigned long uflags, -unsigned long kflags) +unsigned long kflags,int logfd) {struct ckpt_ctx *ctx;int err;checkpoint/sys.c static struct ckpt_ctx *ckpt_ctx_alloc(int fd, unsigned long uflags, · line 244
Quoted 5 lines
checkpoint/sys.c +2
-0@@ -238,6 +240,9 @@ static struct ckpt_ctx *ckpt_ctx_alloc(int fd, unsigned long uflags, ctx->kflags = kflags; ctx->ktime_begin =ktime_get (); +/* If logfd's a bad fd that's fine, no log output required... */ + ctx->logfile =fget (logfd);Can we make it more user-friendly, e.g. f logfd==-1 then no logfile, otherwise if fget(logfd) fails then return
-EBADF?checkpoint/sys.c int walk_task_subtree(struct task_struct *root, · line 351
Quoted 13 lines
checkpoint/sys.c +6
-0+atomic_set (&ctx->refcount,0 );INIT_LIST_HEAD (&ctx->pgarr_list);INIT_LIST_HEAD (&ctx->pgarr_pool);@@ -339,6 +344,51 @@ int walk_task_subtree(struct task_struct *root,return (ret <0 ? ret : total); } +/* +* currentpid:targetpid fmt%args +*/ +void ckpt_log_error (struct ckpt_ctx *ctx,char *fmt, ...) +{As I commented before, I really wish not to go through this again. Can we come up with a mechanism for error messages, that will set a "standard" format (like I tried to do in
ckpt_write_err) ?
Quoted 4 lines
(I like Matt's suggestion to use one format string instead of two, and allow "%(T)" constructs for our format directives).
Also, I assume some of that code can be reused here below.
Perhaps we should be using the audit system.
-serge
PATCH 3/3 use ckpt_error in checkpoint/restart.c
In reply to a message not in the archiveIn cases where f(x) always returns 0 or <0, I felt free to remove unconditional ckpt_debugs in favor of ckpt_error() only on error.
--- checkpoint/restart.c | 90 ++++++++++++++++++++++++++++++++----------------- 1 files changed, 59 insertions(+), 31 deletions(-)
checkpoint/restart.c +59 -31
@@ -64,7 +64,7 @@ static int restore_debug_task(struct ckpt_ctx *ctx, int flags) s =kmalloc (sizeof (*s),GFP_KERNEL );if (!s) { -ckpt_debug ("no memory to register ?!\n" ); +ckpt_error (ctx,"no memory to register ?!\n" );return -ENOMEM ; } s->pid = current->pid;
@@ -197,13 +197,13 @@ static int _ckpt_read_err(struct ckpt_ctx *ctx, struct ckpt_hdr *h) len = h->len -sizeof (*h); ptr =kzalloc (len +1 ,GFP_KERNEL );if (!ptr) { -ckpt_debug ("insufficient memory to report image error\n" ); +ckpt_error (ctx,"insufficient memory to report image error\n" );return -ENOMEM ; } ret =ckpt_kread (ctx, ptr, len);if (ret >=0 ) { -ckpt_debug ("%s\n" , &ptr[1 ]); +ckpt_error (ctx,"%s\n" , &ptr[1 ]); ret = -EIO ; }
@@ -709,7 +709,7 @@ static inline void _restore_notify_error(struct ckpt_ctx *ctx, int errno) {/* first to fail: notify everyone (racy but harmless) */ if (!ckpt_test_ctx_error (ctx)) { -ckpt_debug ("setting restart error %d\n" , errno); \ +ckpt_error (ctx,"setting restart error %d\n" , errno);ckpt_set_ctx_error (ctx, errno);complete (&ctx->complete);wake_up_all (&ctx->waitq);
@@ -723,7 +723,8 @@ static inline void _restore_notify_error(struct ckpt_ctx *ctx, int errno)*/ #define restore_notify_error (ctx, errno) \ do { \ - ckpt_debug("restart error %d, root pid %d\n", errno, ctx->root_pid); \ + ckpt_error(ctx, "restart error %d, root pid %d\n", errno, \ + ctx->root_pid); \ _restore_notify_error(ctx, errno); \ } while(0)
@@ -747,7 +748,8 @@ static int set_task_ctx(struct task_struct *task, struct ckpt_ctx *ctx) task->checkpoint_ctx =ckpt_ctx_get (ctx); ret =0 ; }else { -ckpt_debug ("task %d has checkpoint_ctx\n" ,task_pid_vnr (task)); +ckpt_error (ctx,"task %d has checkpoint_ctx\n" , +task_pid_vnr (task)); ret =1 ; }task_unlock (task);
@@ -797,7 +799,7 @@ static int restore_activate_next(struct ckpt_ctx *ctx)rcu_read_unlock ();if (!task) { -ckpt_debug ("could not find task %d\n" , pid); +ckpt_error (ctx,"could not find task %d\n" , pid);restore_notify_error (ctx, -ESRCH );return -ESRCH ; }
@@ -952,29 +954,38 @@ static int do_restore_task(void) current->flags |=PF_RESTARTING ; ret =wait_sync_threads (); -if (ret <0 ) +if (ret <0 ) { +ckpt_error (ctx,"wait_sync_threads ret %d\n" , ret); goto out; + }/* wait for our turn, do the restore, and tell next task in line */ ret =wait_task_active (ctx); -if (ret <0 ) +if (ret <0 ) { +ckpt_error (ctx,"wait_task_active ret %d\n" , ret); goto out; + }restore_debug_running (ctx); ret =pre_restore_task (); -if (ret <0 ) +if (ret <0 ) { +ckpt_error (ctx,"pre_restore_task ret %d\n" , ret); goto out; + } zombie =restore_task (ctx);if (zombie <0 ) { +ckpt_error (ctx,"restore_task ret %d\n" , ret); ret = zombie; goto out; } ret =restore_activate_next (ctx); -if (ret <0 ) +if (ret <0 ) { +ckpt_error (ctx,"restore_activate_next ret %d\n" , ret); goto out; + }/* * zombie: we're done here; do_exit() will notice the @ctx on
@@ -1015,12 +1026,12 @@ static int __prepare_descendants(struct task_struct *task, void *data)ckpt_debug ("consider task %d\n" ,task_pid_vnr (task));if (!ptrace_may_access (task,PTRACE_MODE_ATTACH )) { -ckpt_debug ("stranger task %d\n" ,task_pid_vnr (task)); +ckpt_error (ctx,"stranger task %d\n" ,task_pid_vnr (task));return -EPERM ; }if (task_ptrace (task) &PT_PTRACED ) { -ckpt_debug ("ptraced task %d\n" ,task_pid_vnr (task)); +ckpt_error (ctx,"ptraced task %d\n" ,task_pid_vnr (task));return -EBUSY ; }
@@ -1176,24 +1187,31 @@ static int do_restore_coord(struct ckpt_ctx *ctx, pid_t pid)restore_debug_running (ctx); ret =restore_read_header (ctx); -ckpt_debug ("restore header: %d\n" , ret); -if (ret <0 ) +if (ret <0 ) { +ckpt_error (ctx,"restore header: %d\n" , ret);return ret; + } ret =restore_container (ctx); -ckpt_debug ("restore container: %d\n" , ret); -if (ret <0 ) +if (ret <0 ) { +ckpt_error (ctx,"restore container: %d\n" , ret);return ret; + } ret =restore_read_tree (ctx); -ckpt_debug ("restore tree: %d\n" , ret); -if (ret <0 ) +if (ret <0 ) { +ckpt_error (ctx,"restore tree: %d\n" , ret);return ret; + } -if ((ctx->uflags &RESTART_TASKSELF ) && ctx->nr_pids !=1 ) +if ((ctx->uflags &RESTART_TASKSELF ) && ctx->nr_pids !=1 ) { +ckpt_error (ctx,"self-restart but nr_pids=%d\n" , ctx->nr_pids);return -EINVAL ; + } ret =init_restart_ctx (ctx, pid); -if (ret <0 ) +if (ret <0 ) { +ckpt_error (ctx,"init_restart_ctx returned %d\n" , ret);return ret; + }/* * Populate own ->checkpoint_ctx: if an ancestor attempts to
@@ -1206,7 +1224,7 @@ static int do_restore_coord(struct ckpt_ctx *ctx, pid_t pid)* We are a bad-behaving descendant: an ancestor must * have prepare_descendants() us as part of a restart. */ -ckpt_debug ("coord already has checkpoint_ctx\n" ); +ckpt_error (ctx,"coord already has checkpoint_ctx\n" );return -EBUSY ; }
@@ -1218,35 +1236,45 @@ static int do_restore_coord(struct ckpt_ctx *ctx, pid_t pid)if (ctx->uflags &RESTART_TASKSELF ) { ret =pre_restore_task (); -ckpt_debug ("pre restore task: %d\n" , ret); -if (ret <0 ) +if (ret <0 ) { +ckpt_error (ctx,"pre restore task: %d\n" , ret); goto out; + } ret =restore_task (ctx);ckpt_debug ("restore task: %d\n" , ret); -if (ret <0 ) +if (ret <0 ) { +ckpt_error (ctx,"restore task: %d\n" , ret); goto out; + } }else {/* prepare descendants' t->checkpoint_ctx point to coord */ ret =prepare_descendants (ctx, ctx->root_task);ckpt_debug ("restore prepare: %d\n" , ret); -if (ret <0 ) +if (ret <0 ) { +ckpt_error (ctx,"restore prepare: %d\n" , ret); goto out; + }/* wait for all other tasks to complete do_restore_task() */ ret =wait_all_tasks_finish (ctx);ckpt_debug ("restore finish: %d\n" , ret); -if (ret <0 ) +if (ret <0 ) { +ckpt_error (ctx,"wait_all_tasks_finish: %d\n" , ret); goto out; + } } ret =deferqueue_run (ctx->deferqueue);/* run deferred work */ ckpt_debug ("restore deferqueue: %d\n" , ret); -if (ret <0 ) +if (ret <0 ) { +ckpt_error (ctx,"restore deferqueue: %d\n" , ret); goto out; + } ret =restore_read_tail (ctx); -ckpt_debug ("restore tail: %d\n" , ret); -if (ret <0 ) +if (ret <0 ) { +ckpt_error (ctx,"restore tail: %d\n" , ret); goto out; + }if (ctx->uflags &RESTART_FROZEN ) { ret =cgroup_freezer_make_frozen (ctx->root_task);
@@ -1347,7 +1375,7 @@ long do_restart(struct ckpt_ctx *ctx, pid_t pid, unsigned long flags)if (!ctx || (ctx->uflags &RESTART_TASKSELF )) {if (ret <0 ) {/* partial restore is undefined: terminate */ -ckpt_debug ("restart err %ld, exiting\n" , ret); +ckpt_error (ctx,"restart err %ld, exiting\n" , ret);force_sig (SIGKILL , current); }else { ret =restore_retval ();
Signature · 1 line
1.6.1