Skip to contentSkip to conversation

ARM pull request v3

U-Boot Tom 6 participants 8 messages Oct 18, 2009 – Oct 23, 2009

lore
Share & tools
lore

Tom

author
#0 lore raw

This is what has changed since v2

10,12c10,12

<       CPU9260 : fix machine ID when using a CPU9G20.
<       fix CPU9260/CPU9G20 compile warnings
<       main.c: In function 'abortboot':

---

Quoted 3 lines

AT91 CPU9260 Fix machine ID when using a CPU9G20. AT91 CPU9260 CPU9G20 Fix compile warnings AT91 CPUAT91 Fix compiler warning

45,46c45
< Steve Sakoman (2):
< TI: OMAP3: Refactors the SM911x driver
---

Quoted 1 line

Steve Sakoman (1):

117d115
< drivers/net/smc911x.c | 12 +-
161c159

This comes from rebasing the arm master-sync branch

I added the AT91 prefix to the at91 patches and fixed the subject on the subject on the CPUAT91.

I removed the sm911x patch.

I tried and failed to change the 3430sdp to point to the true author.

Tom

The following changes since commit a380279b2abe130c2d3d2c8de36f8ff98bc6b3b0:
Daniel Gorsulowski (1):
at91: Update MEESC board support

are available in the git repository at:

git://git.denx.de/u-boot-arm master-sync

Eric Benard (3):
AT91 CPU9260 Fix machine ID when using a CPU9G20. AT91 CPU9260 CPU9G20 Fix compile warnings AT91 CPUAT91 Fix compiler warning

Minkyu Kang (5):
s5pc1xx: support Samsung s5pc1xx SoC
s5pc1xx: support onenand driver
s5pc1xx: support serial driver
s5pc1xx: add support SMDKC100 board
s5pc1xx: SMDKC100: fix compile warnings

Nishanth Menon (4):
OMAP3: export enable_gpmc_cs_config to board files
OMAP3: fix warnings when NAND/ONENAND is not used
OMAP3: Fix SDRC init
TI OMAP3: make gpmc_config as const

Sandeep Paulraj (13):
TI DaVinci DM355: Fix Compilation warning for DM355 EVM TI DaVinci DM365: Fix Compilation warning for DM365 EVM TI DaVinci DM646x: Adding initial support for DM6467 EVM
TI: DaVinci: DM355 Leopard board support
TI DaVinci: Maintainer for DM355 and DM365 EVM
TI: OMAP3: Remove SZ_xx references
TI DaVinci DM355: Add Config option for 64 bit Support TI DaVinci DM365: Add Config option for 64 bit Support TI DaVinci DVEVM: Add Config option for 64 bit Support TI DaVinci Sonata: Add Config option for 64 bit Support TI DaVinci: DM355 Leopard: Fix compilation warning TI DaVinci: Fix DM6467 EVM Compilation Warning TI DaVinci: Adding Copyright for DM365 EVM

Simon Kagstrom (1):
arm926ejs: 8-byte align stack to avoid LDRD/STRD problems

Steve Sakoman (1):
OMAP3: Update Overo and Beagle environment

Tom Rix (2):
Zoom2 Fix serial gpmc setup
TI OMAP3 SDP3430: Initial Support

[email protected] (5):
CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards Clean-up of cpu_arm920t and cpu_arm920t_s3c24x0 code Clean-up of s3c24x0 header files
Clean-up of s3c24x0 drivers excluding nand driver Clean-up of s3c24x0 nand driver

  MAINTAINERS                               |   12 +
  MAKEALL                                   |    4 +
  Makefile                                  |   12 +
  board/davinci/dm355evm/dm355evm.c         |    4 +-
  board/davinci/dm355leopard/Makefile       |   52 ++
  board/davinci/dm355leopard/config.mk      |    6 +
  board/davinci/dm355leopard/dm355leopard.c |   98 +++
  board/davinci/dm365evm/dm365evm.c         |    5 +-
  board/davinci/dm6467evm/Makefile          |   52 ++
  board/davinci/dm6467evm/config.mk         |    2 +
  board/davinci/dm6467evm/dm6467evm.c       |   31 +
  board/eukrea/cpu9260/cpu9260.c            |    2 +-
  board/logicpd/zoom2/zoom2.c               |    5 +-
  board/mpl/vcma9/vcma9.c                   |   13 +-
  board/mpl/vcma9/vcma9.h                   |   20 +-
  board/samsung/smdk2400/smdk2400.c         |    5 +-
  board/samsung/smdk2410/smdk2410.c         |    5 +-
  board/samsung/smdkc100/Makefile           |   55 ++
  board/samsung/smdkc100/config.mk          |   16 +
  board/samsung/smdkc100/lowlevel_init.S    |  215 +++++
  board/samsung/smdkc100/mem_setup.S        |  197 +++++
  board/samsung/smdkc100/onenand.c          |   83 ++
  board/samsung/smdkc100/smdkc100.c         |   51 ++
  board/sbc2410x/sbc2410x.c                 |    7 +-
  board/ti/sdp3430/Makefile                 |   49 ++
  board/ti/sdp3430/config.mk                |   33 +
  board/ti/sdp3430/sdp.c                    |  204 +++++
  board/ti/sdp3430/sdp.h                    |  417 +++++++++
  board/trab/cmd_trab.c                     |   12 +-
  board/trab/rs485.c                        |   12 +-
  board/trab/trab.c                         |   17 +-
  board/trab/trab_fkt.c                     |   26 +-
  board/trab/tsc2000.c                      |   17 +-
  board/trab/tsc2000.h                      |    4 +-
  board/trab/vfd.c                          |   12 +-
  common/serial.c                           |   18 +
  cpu/arm920t/s3c24x0/interrupts.c          |    4 +-
  cpu/arm920t/s3c24x0/speed.c               |   42 +-
  cpu/arm920t/s3c24x0/timer.c               |  110 ++--
  cpu/arm920t/s3c24x0/usb.c                 |   30 +-
  cpu/arm920t/s3c24x0/usb_ohci.c            | 1323 
+++++++++++++++--------------
  cpu/arm920t/s3c24x0/usb_ohci.h            |  209 +++---
  cpu/arm920t/start.S                       |   63 +-
  cpu/arm926ejs/start.S                     |    1 +
  cpu/arm_cortexa8/omap3/mem.c              |   21 +-
  cpu/arm_cortexa8/omap3/sys_info.c         |    2 +-
  cpu/arm_cortexa8/s5pc1xx/Makefile         |   53 ++
  cpu/arm_cortexa8/s5pc1xx/cache.c          |   43 +
  cpu/arm_cortexa8/s5pc1xx/clock.c          |  308 +++++++
  cpu/arm_cortexa8/s5pc1xx/cpu_info.c       |   57 ++
  cpu/arm_cortexa8/s5pc1xx/reset.S          |   47 +
  cpu/arm_cortexa8/s5pc1xx/timer.c          |  195 +++++
  doc/README.s5pc1xx                        |   56 ++
  drivers/i2c/s3c24x0_i2c.c                 |  273 +++---
  drivers/mtd/nand/s3c2410_nand.c           |   62 +-
  drivers/mtd/onenand/Makefile              |    1 +
  drivers/mtd/onenand/samsung.c             |  636 ++++++++++++++
  drivers/rtc/s3c24x0_rtc.c                 |  130 ++--
  drivers/serial/Makefile                   |    1 +
  drivers/serial/serial_s3c24x0.c           |  160 ++--
  drivers/serial/serial_s5pc1xx.c           |  195 +++++
  include/asm-arm/arch-davinci/hardware.h   |    2 +
  include/asm-arm/arch-omap3/cpu.h          |    1 +
  include/asm-arm/arch-omap3/mem.h          |    8 +-
  include/asm-arm/arch-omap3/sys_proto.h    |    2 +
  include/asm-arm/arch-s5pc1xx/clk.h        |   32 +
  include/asm-arm/arch-s5pc1xx/clock.h      |   94 ++
  include/asm-arm/arch-s5pc1xx/cpu.h        |   72 ++
  include/asm-arm/arch-s5pc1xx/gpio.h       |  129 +++
  include/asm-arm/arch-s5pc1xx/power.h      |   42 +
  include/asm-arm/arch-s5pc1xx/pwm.h        |   59 ++
  include/asm-arm/arch-s5pc1xx/uart.h       |   47 +
  include/configs/cpu9260.h                 |    1 +
  include/configs/cpuat91.h                 |    4 +-
  include/configs/davinci_dm355evm.h        |    1 +
  include/configs/davinci_dm355leopard.h    |  162 ++++
  include/configs/davinci_dm365evm.h        |    2 +
  include/configs/davinci_dm6467evm.h       |  132 +++
  include/configs/davinci_dvevm.h           |    1 +
  include/configs/davinci_sonata.h          |    1 +
  include/configs/devkit8000.h              |   15 +-
  include/configs/omap3_beagle.h            |   42 +-
  include/configs/omap3_evm.h               |   15 +-
  include/configs/omap3_overo.h             |   42 +-
  include/configs/omap3_pandora.h           |   15 +-
  include/configs/omap3_sdp3430.h           |  369 ++++++++
  include/configs/omap3_zoom1.h             |   15 +-
  include/configs/omap3_zoom2.h             |   15 +-
  include/configs/sbc2410x.h                |    4 +-
  include/configs/smdk2400.h                |    4 +-
  include/configs/smdk2410.h                |    4 +-
  include/configs/smdkc100.h                |  242 ++++++
  include/configs/trab.h                    |   12 +-
  include/linux/mtd/onenand.h               |    1 +
  include/linux/mtd/onenand_regs.h          |    4 +
  include/linux/mtd/samsung_onenand.h       |  131 +++
  include/s3c2400.h                         |  494 +----------
  include/s3c2410.h                         |  159 +---
  include/s3c24x0.h                         |  605 ++------------
  include/serial.h                          |    7 +
  100 files changed, 6323 insertions(+), 2459 deletions(-)

create mode 100644 board/davinci/dm355leopard/Makefile create mode 100644 board/davinci/dm355leopard/config.mk create mode 100644 board/davinci/dm355leopard/dm355leopard.c create mode 100644 board/davinci/dm6467evm/Makefile create mode 100644 board/davinci/dm6467evm/config.mk create mode 100644 board/davinci/dm6467evm/dm6467evm.c create mode 100644 board/samsung/smdkc100/Makefile create mode 100644 board/samsung/smdkc100/config.mk create mode 100644 board/samsung/smdkc100/lowlevel_init.S create mode 100644 board/samsung/smdkc100/mem_setup.S create mode 100644 board/samsung/smdkc100/onenand.c create mode 100644 board/samsung/smdkc100/smdkc100.c create mode 100644 board/ti/sdp3430/Makefile create mode 100644 board/ti/sdp3430/config.mk create mode 100644 board/ti/sdp3430/sdp.c
create mode 100644 board/ti/sdp3430/sdp.h
create mode 100644 cpu/arm_cortexa8/s5pc1xx/Makefile create mode 100644 cpu/arm_cortexa8/s5pc1xx/cache.c create mode 100644 cpu/arm_cortexa8/s5pc1xx/clock.c create mode 100644 cpu/arm_cortexa8/s5pc1xx/cpu_info.c create mode 100644 cpu/arm_cortexa8/s5pc1xx/reset.S create mode 100644 cpu/arm_cortexa8/s5pc1xx/timer.c create mode 100644 doc/README.s5pc1xx
create mode 100644 drivers/mtd/onenand/samsung.c create mode 100644 drivers/serial/serial_s5pc1xx.c create mode 100644 include/asm-arm/arch-s5pc1xx/clk.h create mode 100644 include/asm-arm/arch-s5pc1xx/clock.h create mode 100644 include/asm-arm/arch-s5pc1xx/cpu.h create mode 100644 include/asm-arm/arch-s5pc1xx/gpio.h create mode 100644 include/asm-arm/arch-s5pc1xx/power.h create mode 100644 include/asm-arm/arch-s5pc1xx/pwm.h create mode 100644 include/asm-arm/arch-s5pc1xx/uart.h create mode 100644 include/configs/davinci_dm355leopard.h create mode 100644 include/configs/davinci_dm6467evm.h create mode 100644 include/configs/omap3_sdp3430.h create mode 100644 include/configs/smdkc100.h create mode 100644 include/linux/mtd/samsung_onenand.h

#1 lore raw
Quoted 13 lines

This is what has changed since v2

10,12c10,12

<       CPU9260 : fix machine ID when using a CPU9G20.
<       fix CPU9260/CPU9G20 compile warnings
<       main.c: In function 'abortboot':

---

Quoted 3 lines

AT91 CPU9260 Fix machine ID when using a CPU9G20. AT91 CPU9260 CPU9G20 Fix compile warnings AT91 CPUAT91 Fix compiler warning

Quoted 8 lines

45,46c45
< Steve Sakoman (2):
< TI: OMAP3: Refactors the SM911x driver
---

Quoted 1 line

Steve Sakoman (1):

117d115
< drivers/net/smc911x.c | 12 +-
161c159

I understand this is the one Wolfgang objected to but I have explained the situation and I am confident this is a valid commit and was definitely sent to the mailing list. Besides even Ben was OK with it.

Quoted 12 lines

This comes from rebasing the arm master-sync branch

I added the AT91 prefix to the at91 patches and fixed the subject on the subject on the CPUAT91.

I removed the sm911x patch.

I tried and failed to change the 3430sdp to point to the true author.

Tom

The patch just needs to have From: David Brownell < his e-mail>

#2 lore raw

Sandeep,

Quoted 22 lines · Sandeep
Quoted 13 lines

This is what has changed since v2

10,12c10,12

<       CPU9260 : fix machine ID when using a CPU9G20.
<       fix CPU9260/CPU9G20 compile warnings
<       main.c: In function 'abortboot':

---

Quoted 3 lines

AT91 CPU9260 Fix machine ID when using a CPU9G20. AT91 CPU9260 CPU9G20 Fix compile warnings AT91 CPUAT91 Fix compiler warning

Quoted 8 lines

45,46c45
< Steve Sakoman (2):
< TI: OMAP3: Refactors the SM911x driver
---

Quoted 1 line

Steve Sakoman (1):

117d115
< drivers/net/smc911x.c | 12 +-
161c159

Quoted 4 lines

I understand this is the one Wolfgang objected to but I have explained the situation and I am confident this is a valid commit and was definitely sent to the mailing list. Besides even Ben was OK with it.

I'm still OK with it, but let's try to clean up our workflow next release...
I know you guys had quite a mess to clean up with ARM, so to some extent
this chaos is understandable.

regards,
Ben

#3 lore raw

Dear Ben Warren,

Quoted 4 lines · In message <[email protected]> you…

I'm still OK with it, but let's try to clean up our workflow next release...
I know you guys had quite a mess to clean up with ARM, so to some extent
this chaos is understandable.

Thanks for pointing this out.

I also want to stress that I in no way intend to criticize anybody. I am well aware what amount of work you have been doing, and that all of this is completely new to many of you. I just want to point out the few rough edges we should try to iron out or even better to avoid next time. Big thanks to everybody.

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Engineering without management is art."               - Jeff Johnson
#4 lore raw
In reply to Tom
Quoted 20 lines · Tom

This is what has changed since v2

10,12c10,12

<       CPU9260 : fix machine ID when using a CPU9G20.
<       fix CPU9260/CPU9G20 compile warnings
<       main.c: In function 'abortboot':

---

Quoted 3 lines

AT91 CPU9260 Fix machine ID when using a CPU9G20. AT91 CPU9260 CPU9G20 Fix compile warnings AT91 CPUAT91 Fix compiler warning

45,46c45
< Steve Sakoman (2):
< TI: OMAP3: Refactors the SM911x driver
---

Quoted 1 line

Steve Sakoman (1):

117d115
< drivers/net/smc911x.c | 12 +-
161c159

This comes from rebasing the arm master-sync branch

...

Quoted 1 line

I removed the sm911x patch.

After this is discussed now, could we apply it again?

Without this patch it will be broken.

Thanks

Dirk

author
#5 lore raw
Quoted 22 lines · Dirk Behme
Quoted 14 lines · Tom

This is what has changed since v2

10,12c10,12

<       CPU9260 : fix machine ID when using a CPU9G20.
<       fix CPU9260/CPU9G20 compile warnings
<       main.c: In function 'abortboot':

---

Quoted 3 lines

AT91 CPU9260 Fix machine ID when using a CPU9G20. AT91 CPU9260 CPU9G20 Fix compile warnings AT91 CPUAT91 Fix compiler warning

45,46c45
< Steve Sakoman (2):
< TI: OMAP3: Refactors the SM911x driver
---

Quoted 6 lines
Quoted 1 line

Steve Sakoman (1):

117d115
< drivers/net/smc911x.c | 12 +-
161c159

This comes from rebasing the arm master-sync branch

Quoted 8 lines

...

Quoted 1 line

I removed the sm911x patch.

After this is discussed now, could we apply it again?

Without this patch it will be broken.

I believe the issue is only about the workflow process of the patch. I believe to resolve, the patch needs to be reposted, unchanged, to the list and to have Ben's ack-ed by added.

Once this is done, I can apply it.
Tom

Quoted 3 lines

Thanks

Dirk

#6 lore raw
In reply to Tom

Hi Tom and Wolfgang!

Quoted 8 lines · On Sun, 18 Oct 2009 17:58:48 -0500 Tom <[email protected]> wrote:

[...]
The following changes since commit a380279b2abe130c2d3d2c8de36f8ff98bc6b3b0:
Daniel Gorsulowski (1):
at91: Update MEESC board support

are available in the git repository at:

git://git.denx.de/u-boot-arm master-sync

Has this pull been forgotten or is it in the works still?

// Simon

author
#7 lore raw
Quoted 10 lines · Simon Kagstrom

Hi Tom and Wolfgang!

Quoted 5 lines · On Sun, 18 Oct 2009 17:58:48 -0500 Tom <[email protected]> wrote:

[...]
The following changes since commit a380279b2abe130c2d3d2c8de36f8ff98bc6b3b0:
Daniel Gorsulowski (1):
at91: Update MEESC board support

Quoted 7 lines
Quoted 3 lines

are available in the git repository at:

git://git.denx.de/u-boot-arm master-sync

Has this pull been forgotten or is it in the works still?

// Simon

This is still in the works.
There are some changes I need to incorporate and have been busy with a board bringup. I will have a new and hopefully final version out this weekend.
Tom