Skip to contentSkip to conversation

Help on U-Boot and Linux integration on PPC cpus

U-Boot Luigi 'Comio' Mantellini 3 participants 4 messages Oct 23, 2009

lore
Share & tools
lore
#0 lore raw

Hi Ml,

I'm working on a ppc8541 based board. I ported the U-boot board just creationg a "strip-down" version of frescale8541 board (I don't use TSEC and Quicc, ...)-
My next task is to have the first boot with linux and I'm a lot confused by fdt usage.

In the past I always worked on mips based SoC and the ppc is a new world for me, then my apologies for my stupid questions.

I have a couple of (trivial) question/doubts regarding the fdt usage:

1) I created my dts/dtb (exentially copying a 8541 board): How can this object be used by u-boot? should I copy it into the flash (for example)?
2) is there a how-to or a survey regarding the fdt usage into u-boot (and linux kernel)?

thanks for help,

luigi

Signature · 9 lines
Luigi 'Comio' Mantellini

R&D - Software
Industrie Dial Face S.p.A.
Via Canzo, 4
20068 Peschiera Borromeo (MI), Italy
Tel.:  +39 02 5167 2813
Fax:   +39 02 5167 2459
Email: luigi.mantellini at idf-hit.com
#1 lore raw
Quoted 10 lines · Luigi 'Comio' Mantellini

Hi Ml,

I'm working on a ppc8541 based board. I ported the U-boot board just creationg a "strip-down" version of frescale8541 board (I don't use TSEC and Quicc, ...)-
My next task is to have the first boot with linux and I'm a lot confused by fdt usage.

In the past I always worked on mips based SoC and the ppc is a new world for me, then my apologies for my stupid questions.

s/ppc/powerpc/ - the linux ppc arch doesn't support fdt. ;-)

Quoted 4 lines

I have a couple of (trivial) question/doubts regarding the fdt usage:

1) I created my dts/dtb (exentially copying a 8541 board): How can this object be used by u-boot? should I copy it into the flash (for example)?

Strictly speaking, it isn't *used* by u-boot, but it is manipulated by u-boot to fix it up / augment it to describe the board's hardware. It is then *used* by linux - it allows one linux image to boot on a wide variety of boards (MAJOR win).

You need to pass a fdt blob to the linux kernel. As always, there are many ways to do this. One way is to program it into flash. This is great if your blob is stable (e.g. good for manufacturing). Another way is to tftp the blob over from your server along with your linux image.

The *slickest* way by far is to use a FIT image - this wraps *everything* (kernel, board fdt blob, ramdisk) in a fdt blob. See
u-boot/doc/uimage.FIT

<http://git.denx.de/?p=u-boot.git;a=tree;f=doc/uImage.FIT;h=f1d03d7350a164ee6c951ea239a0e0e72db0e81b;hb=HEAD>

Quoted 2 lines

2) is there a how-to or a survey regarding the fdt usage into u-boot (and linux kernel)?

There are various fdt whitepapers out there and *how* the fdt is used by linux is documented in the linux source tree. For PowerPC processors:
linux/Documentation/powerpc

<http://git.denx.de/?p=linux-2.6-denx.git;a=tree;f=Documentation/powerpc;h=01939ab891de2b352c4e9185d1f6bc667436bfb3;hb=HEAD>

Quoted 3 lines

thanks for help,

luigi

Best regards,
gvb

#2 lore raw

Hi Jerry and Wolfgang,

Thanks for your suggestions.

ciao ciao

luigi

venerd? 23 ottobre 2009 13:39 Jerry Van Baren <[email protected]> ha scritto:

Quoted 3 lines · Luigi 'Comio' Mantellini

Hi Ml,

I'm working on a ppc8541 based board. I ported the U-boot board just

creationg

Quoted 3 lines

a "strip-down" version of frescale8541 board (I don't use TSEC and Quicc, ...)-
My next task is to have the first boot with linux and I'm a lot confused by

fdt

Quoted 4 lines

usage.

In the past I always worked on mips based SoC and the ppc is a new world for me, then my apologies for my stupid questions.

s/ppc/powerpc/ - the linux ppc arch doesn't support fdt. ;-)

Quoted 3 lines

I have a couple of (trivial) question/doubts regarding the fdt usage:

1) I created my dts/dtb (exentially copying a 8541 board): How can this

object

Quoted 1 line

be used by u-boot? should I copy it into the flash (for example)?

Strictly speaking, it isn't *used* by u-boot, but it is manipulated by u-boot to fix it up / augment it to describe the board's hardware. It is then *used* by linux - it allows one linux image to boot on a wide variety of boards (MAJOR win).

You need to pass a fdt blob to the linux kernel. As always, there are many ways to do this. One way is to program it into flash. This is great if your blob is stable (e.g. good for manufacturing). Another way is to tftp the blob over from your server along with your linux image.

The *slickest* way by far is to use a FIT image - this wraps *everything* (kernel, board fdt blob, ramdisk) in a fdt blob. See
u-boot/doc/uimage.FIT

<http://git.denx.de/?p=u-
boot.git;a=tree;f=doc/uImage.FIT;h=f1d03d7350a164ee6c951ea239a0e0e72db0e81b;hb=HEAD>

Quoted 2 lines

2) is there a how-to or a survey regarding the fdt usage into u-boot (and linux kernel)?

There are various fdt whitepapers out there and *how* the fdt is used by linux is documented in the linux source tree. For PowerPC processors:
linux/Documentation/powerpc

<http://git.denx.de/?p=linux-2.6-
denx.git;a=tree;f=Documentation/powerpc;h=01939ab891de2b352c4e9185d1f6bc667436bfb3;hb=HEAD>

Quoted 3 lines

thanks for help,

luigi

Best regards,
gvb

Signature · 9 lines
Luigi 'Comio' Mantellini

R&D - Software
Industrie Dial Face S.p.A.
Via Canzo, 4
20068 Peschiera Borromeo (MI), Italy
Tel.:  +39 02 5167 2813
Fax:   +39 02 5167 2459
Email: luigi.mantellini at idf-hit.com
#3 lore raw
In reply to Luigi 'Comio' Mantellini

Dear "Luigi 'Comio' Mantellini",

Quoted 5 lines · In message <[email protected]> you wrote:

1) I created my dts/dtb (exentially copying a 8541 board): How can this object be used by u-boot? should I copy it into the flash (for example)?
2) is there a how-to or a survey regarding the fdt usage into u-boot (and linux kernel)?

You may want to read section "7.2. Flattened Device Tree Blob" and following in the manual, see
http://www.denx.de/wiki/view/DULG/LinuxFDTBlob

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Perl itself is  usually  pretty  good  about  telling  you  what  you
shouldn't do. :-)     - Larry Wall in <[email protected]>