NET: Move MDIO regs out of TSEC Space
PATCH 1/1 NET: Move MDIO regs out of TSEC Space
Moved the mdio regs out of the tsec structure,and provided different offsets for tsec base and mdio base so that provision for etsec2.0 can be provided.
This patch helps in providing the support for etsec2.0 In etsec2.0, the MDIO register space and the etsec reg space are different.
Also, moved the TSEC_BASE_ADDR and MDIO_BASE_ADDR definitons into platform specific files.
--- drivers/net/tsec.c | 20 +++++++++--------- include/asm-ppc/immap_83xx.h | 9 ++++++++ include/asm-ppc/immap_85xx.h | 10 +++++++++ include/asm-ppc/immap_86xx.h | 9 ++++++++ include/tsec.h | 43 +++++++++++++++++++---------------------- 5 files changed, 58 insertions(+), 33 deletions(-)
drivers/net/tsec.c +10 -10
@@ -83,7 +83,7 @@ static struct tsec_info_struct tsec_info[] = {#ifdef CONFIG_MPC85XX_FEC { .regs = (tsec_t *)(TSEC_BASE_ADDR + 0x2000), - .miiregs = (tsec_t *)(TSEC_BASE_ADDR), + .miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR), .devname = CONFIG_MPC85XX_FEC_NAME, .phyaddr =FEC_PHY_ADDR , .flags = FEC_FLAGS
@@ -136,6 +136,7 @@ int tsec_initialize(bd_t * bis, struct tsec_info_struct *tsec_info) privlist[num_tsecs++] = priv; priv->regs = tsec_info->regs; priv->phyregs = tsec_info->miiregs; + priv->phyregs_sgmii = tsec_info->miiregs_sgmii; priv->phyaddr = tsec_info->phyaddr; priv->flags = tsec_info->flags;
@@ -222,7 +223,7 @@ int tsec_init(struct eth_device *dev, bd_t * bd) }/* Writes the given phy's reg with value, using the specified MDIO regs */ -static void tsec_local_mdio_write (volatile tsec_t *phyregs,uint addr, +static void tsec_local_mdio_write (volatile tsec_mdio_t *phyregs,uint addr,uint reg,uint value) {int timeout =1000000 ;
@@ -245,7 +246,7 @@ static void tsec_local_mdio_write(volatile tsec_t *phyregs, uint addr,* notvalid bit cleared), and the bus to cease activity (miimind * busy bit cleared), and then returns the value */ -uint tsec_local_mdio_read (volatile tsec_t *phyregs,uint phyid,uint regnum) +uint tsec_local_mdio_read (volatile tsec_mdio_t *phyregs,uint phyid,uint regnum) {uint value;
@@ -290,11 +291,11 @@ static void tsec_configure_serdes(struct tsec_private *priv) {/* Access TBI PHY registers at given TSEC register offset as opposed to the * register offset used for external PHY accesses */ -tsec_local_mdio_write (priv->regs, priv->regs->tbipa,TBI_ANA , +tsec_local_mdio_write (priv->phyregs_sgmii, priv->regs->tbipa,TBI_ANA ,TBIANA_SETTINGS ); -tsec_local_mdio_write (priv->regs, priv->regs->tbipa,TBI_TBICON , +tsec_local_mdio_write (priv->phyregs_sgmii, priv->regs->tbipa,TBI_TBICON ,TBICON_CLK_SELECT ); -tsec_local_mdio_write (priv->regs, priv->regs->tbipa,TBI_CR , +tsec_local_mdio_write (priv->phyregs_sgmii, priv->regs->tbipa,TBI_CR ,TBICR_SETTINGS ); }
@@ -306,12 +307,11 @@ static int init_phy(struct eth_device *dev) {struct tsec_private *priv = (struct tsec_private *)dev->priv;struct phy_info *curphy; -volatile tsec_t *phyregs = priv->phyregs; +volatile tsec_mdio_t *phyregs = priv->phyregs;volatile tsec_t *regs = priv->regs;/* Assign a Physical address to the TBI */ regs->tbipa =CONFIG_SYS_TBIPA_VALUE ; - phyregs->tbipa =CONFIG_SYS_TBIPA_VALUE ; asm("sync" );/* Reset MII (due to new addresses) */
@@ -739,7 +739,7 @@ uint mii_parse_dm9161_scsr(uint mii_reg, struct tsec_private * priv)uint mii_cis8204_fixled (uint mii_reg,struct tsec_private * priv) {uint phyid; -volatile tsec_t *regbase = priv->phyregs; +volatile tsec_mdio_t *regbase = priv->phyregs;int timeout =1000000 ;for (phyid =0 ; phyid <4 ; phyid++) {
@@ -1772,7 +1772,7 @@ void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd) {int i;uint result; -volatile tsec_t *phyregs = priv->phyregs; +volatile tsec_mdio_t *phyregs = priv->phyregs; phyregs->miimcfg =MIIMCFG_RESET ;
include/asm-ppc/immap_83xx.h +9 -0
@@ -868,4 +868,13 @@ typedef struct immap {#endif #define CONFIG_SYS_MPC83xx_USB_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_USB_OFFSET) + +#define CONFIG_SYS_TSEC1_OFFSET 0x24000 +#define TSEC_SIZE 0x01000 + +#define CONFIG_SYS_MDIO1_OFFSET 0x24520 +#define MDIO_OFFSET 0x01000 + +#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) +#define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)#endif /* __IMMAP_83xx__ */
include/asm-ppc/immap_85xx.h +10 -0
@@ -1932,4 +1932,14 @@ typedef struct ccsr_gur {#define CONFIG_SYS_MPC85xx_USB_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB_OFFSET) +/* TSEC and MDIO OFFSETS */ +#define CONFIG_SYS_TSEC1_OFFSET 0x24000 +#define TSEC_SIZE 0x01000 + +#define CONFIG_SYS_MDIO1_OFFSET 0x24520 +#define MDIO_OFFSET 0x01000 + +#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) +#define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET) +#endif /*__IMMAP_85xx__*/
include/asm-ppc/immap_86xx.h +9 -0
@@ -1298,4 +1298,13 @@ extern immap_t *immr;#define CONFIG_SYS_MPC86xx_DMA_OFFSET (0x21000)#define CONFIG_SYS_MPC86xx_DMA_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DMA_OFFSET) +#define CONFIG_SYS_TSEC1_OFFSET 0x24000 +#define TSEC_SIZE 0x01000 + +#define CONFIG_SYS_MDIO1_OFFSET 0x24520 +#define MDIO_OFFSET 0x01000 + +#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) +#define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET) +#endif /*__IMMAP_86xx__*/
include/tsec.h +20 -23
88 lines not on this page · raw message
Signature · 1 line
1.5.2.2
PATCH 1/1 NET: Move MDIO regs out of TSEC Space
drivers/net/tsec.c static int init_phy(struct eth_device *dev) · line 315
Quoted 12 lines · On Sat, 24 Oct 2009 23:39:36 +0530 Sandeep Gopalpet…
drivers/net/tsec.c +1
-2@@ -306,12 +307,11 @@ static int init_phy(struct eth_device *dev) {struct tsec_private *priv = (struct tsec_private *)dev->priv;struct phy_info *curphy; -volatile tsec_t *phyregs = priv->phyregs; +volatile tsec_mdio_t *phyregs = priv->phyregs;volatile tsec_t *regs = priv->regs;/* Assign a Physical address to the TBI */ regs->tbipa =CONFIG_SYS_TBIPA_VALUE ; - phyregs->tbipa =CONFIG_SYS_TBIPA_VALUE ; asm("sync" );
this generates a new warning:
tsec.c: In function 'init_phy':
tsec.c:307: warning: unused variable 'phyregs'
include/tsec.h line 27
Quoted 4 lines
include/tsec.h +2
-1.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)), \ - .miiregs = (tsec_t *)TSEC_BASE_ADDR, \ + .miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR), \ + .miiregs_sgmii = (tsec_mdio_t *)(MDIO_BASE_ADDR + (num -1)*MDIO_OFFSET ), \
and please use consistent codingstyle; here and..
include/tsec.h line 37
Quoted 10 lines
include/tsec.h +2
-1.devname = CONFIG_TSEC##num##_NAME, \ .phyaddr = TSEC##num##_PHY_ADDR, \ .flags = TSEC##num##_FLAGS \@@ -44,7 +33,8 @@#define SET_STD_TSEC_INFO (x, num) \ { \ x.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)); \ - x.miiregs = (tsec_t *)TSEC_BASE_ADDR; \ + x.miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR); \ + x.miiregs_sgmii = (tsec_mdio_t *)(MDIO_BASE_ADDR + (num -1)*MDIO_OFFSET); \
..here.
Thanks,
Kim
PATCH 1/1 NET: Move MDIO regs out of TSEC Space
Quoted 37 lines
-----Original Message-----
From: Phillips Kim-R1AAHA
Sent: Wednesday, October 28, 2009 2:24 AM
To: Kumar Gopalpet-B05799
Cc: u-boot at lists.denx.de
Subject: Re: [U-Boot] [PATCH] NET: Move MDIO regs out of TSEC Spacedrivers/net/tsec.c static int init_phy(struct eth_device *dev) { · line 314
Quoted 11 lines · On Sat, 24 Oct 2009 23:39:36 +0530 Sandeep Gopalpet…
drivers/net/tsec.c +1
-2@@ -306,12 +307,11 @@ static int init_phy(struct eth_device *dev) {struct tsec_private *priv = (struct tsec_private *)dev->priv;struct phy_info *curphy; -volatile tsec_t *phyregs = priv->phyregs; +volatile tsec_mdio_t *phyregs = priv->phyregs;volatile tsec_t *regs = priv->regs;/* Assign a Physical address to the TBI */ regs->tbipa =CONFIG_SYS_TBIPA_VALUE ; - phyregs->tbipa =CONFIG_SYS_TBIPA_VALUE ; asm("sync" );this generates a new warning:
tsec.c: In function 'init_phy':
tsec.c:307: warning: unused variable 'phyregs'include/tsec.h
Quoted 5 lines
include/tsec.h +3
-1.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)), \ - .miiregs = (tsec_t *)TSEC_BASE_ADDR, \ + .miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR), \ + .miiregs_sgmii = (tsec_mdio_t *)(MDIO_BASE_ADDR + (num +-1)*MDIO_OFFSET ), \and please use consistent codingstyle; here and..
Quoted 14 lines
include/tsec.h line 38
Quoted 11 lines
include/tsec.h +3
-1.devname = CONFIG_TSEC##num##_NAME, \ .phyaddr = TSEC##num##_PHY_ADDR, \ .flags = TSEC##num##_FLAGS \@@ -44,7 +33,8 @@#define SET_STD_TSEC_INFO (x, num) \ { \ x.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)); \ - x.miiregs = (tsec_t *)TSEC_BASE_ADDR; \ + x.miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR); \ + x.miiregs_sgmii = (tsec_mdio_t *)(MDIO_BASE_ADDR + (num +-1)*MDIO_OFFSET); \..here.
Thanks Kim, removed the warning and inconsistancy.
Resending the patches
-Thanks
Sandeep