Skip to contentSkip to conversation

NET: Move MDIO regs out of TSEC Space

PATCH Superseded Sandeep Gopalpet 2 participants 2 messages Oct 29, 2009 Network drivers

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/2 NET: Move MDIO regs out of TSEC Space

Moved the mdio regs out of the tsec structure,and provided different offsets for tsec base and mdio base so that provision for etsec2.0 can be provided.

This patch helps in providing the support for etsec2.0 In etsec2.0, the MDIO register space and the etsec reg space are different.

Also, moved the TSEC_BASE_ADDR and MDIO_BASE_ADDR definitons into platform specific files.

---
*. The changes have been tested on P2020RDB and MPC8315ERDB. *. Included the comments from Kumar Gala and Kim Phillips.

 drivers/net/tsec.c           |   21 +++++++++----------
 include/asm-ppc/immap_83xx.h |   11 +++++++++-
 include/asm-ppc/immap_85xx.h |    9 ++++++++
 include/asm-ppc/immap_86xx.h |   10 ++++++++-
 include/tsec.h               |   44 +++++++++++++++++++++---------------------
 5 files changed, 60 insertions(+), 35 deletions(-)
drivers/net/tsec.c +10 -11
index 3f74118..d8b6619 100644
@@ -5,7 +5,7 @@
  * terms of the GNU Public License, Version 2, incorporated
  * herein by reference.
  *
- * Copyright (C) 2004-2009 Freescale Semiconductor, Inc.
+ * Copyright 2004-2009 Freescale Semiconductor, Inc.
  * (C) Copyright 2003, Motorola, Inc.
  * author Andy Fleming
  *
@@ -80,7 +80,7 @@ static struct tsec_info_struct tsec_info[] = {
 #ifdef CONFIG_MPC85XX_FEC
 	{
 		.regs = (tsec_t *)(TSEC_BASE_ADDR + 0x2000),
-		.miiregs = (tsec_t *)(TSEC_BASE_ADDR),
+		.miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR),
 		.devname = CONFIG_MPC85XX_FEC_NAME,
 		.phyaddr = FEC_PHY_ADDR,
 		.flags = FEC_FLAGS
@@ -133,6 +133,7 @@ int tsec_initialize(bd_t * bis, struct tsec_info_struct *tsec_info)
 	privlist[num_tsecs++] = priv;
 	priv->regs = tsec_info->regs;
 	priv->phyregs = tsec_info->miiregs;
+	priv->phyregs_sgmii = tsec_info->miiregs_sgmii;
 
 	priv->phyaddr = tsec_info->phyaddr;
 	priv->flags = tsec_info->flags;
@@ -219,7 +220,7 @@ int tsec_init(struct eth_device *dev, bd_t * bd)
 }
 
 /* Writes the given phy's reg with value, using the specified MDIO regs */
-static void tsec_local_mdio_write(volatile tsec_t *phyregs, uint addr,
+static void tsec_local_mdio_write(volatile tsec_mdio_t *phyregs, uint addr,
 		uint reg, uint value)
 {
 	int timeout = 1000000;
@@ -242,7 +243,7 @@ static void tsec_local_mdio_write(volatile tsec_t *phyregs, uint addr,
  * notvalid bit cleared), and the bus to cease activity (miimind
  * busy bit cleared), and then returns the value
  */
-uint tsec_local_mdio_read(volatile tsec_t *phyregs, uint phyid, uint regnum)
+uint tsec_local_mdio_read(volatile tsec_mdio_t *phyregs, uint phyid, uint regnum)
 {
 	uint value;
 
@@ -287,11 +288,11 @@ static void tsec_configure_serdes(struct tsec_private *priv)
 {
 	/* Access TBI PHY registers at given TSEC register offset as opposed to the
 	 * register offset used for external PHY accesses */
-	tsec_local_mdio_write(priv->regs, priv->regs->tbipa, TBI_ANA,
+	tsec_local_mdio_write(priv->phyregs_sgmii, priv->regs->tbipa, TBI_ANA,
 			TBIANA_SETTINGS);
-	tsec_local_mdio_write(priv->regs, priv->regs->tbipa, TBI_TBICON,
+	tsec_local_mdio_write(priv->phyregs_sgmii, priv->regs->tbipa, TBI_TBICON,
 			TBICON_CLK_SELECT);
-	tsec_local_mdio_write(priv->regs, priv->regs->tbipa, TBI_CR,
+	tsec_local_mdio_write(priv->phyregs_sgmii, priv->regs->tbipa, TBI_CR,
 			TBICR_SETTINGS);
 }
 
@@ -303,12 +304,10 @@ static int init_phy(struct eth_device *dev)
 {
 	struct tsec_private *priv = (struct tsec_private *)dev->priv;
 	struct phy_info *curphy;
-	volatile tsec_t *phyregs = priv->phyregs;
 	volatile tsec_t *regs = priv->regs;
 
 	/* Assign a Physical address to the TBI */
 	regs->tbipa = CONFIG_SYS_TBIPA_VALUE;
-	phyregs->tbipa = CONFIG_SYS_TBIPA_VALUE;
 	asm("sync");
 
 	/* Reset MII (due to new addresses) */
@@ -733,7 +732,7 @@ uint mii_parse_dm9161_scsr(uint mii_reg, struct tsec_private * priv)
 uint mii_cis8204_fixled(uint mii_reg, struct tsec_private * priv)
 {
 	uint phyid;
-	volatile tsec_t *regbase = priv->phyregs;
+	volatile tsec_mdio_t *regbase = priv->phyregs;
 	int timeout = 1000000;
 
 	for (phyid = 0; phyid < 4; phyid++) {
@@ -1766,7 +1765,7 @@ void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd)
 {
 	int i;
 	uint result;
-	volatile tsec_t *phyregs = priv->phyregs;
+	volatile tsec_mdio_t *phyregs = priv->phyregs;
 
 	phyregs->miimcfg = MIIMCFG_RESET;
 
include/asm-ppc/immap_83xx.h +10 -1
index c60a7d2..6dd477c 100644
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2004-2009 Freescale Semiconductor, Inc.
+ * Copyright 2004-2009 Freescale Semiconductor, Inc.
  *
  * MPC83xx Internal Memory Map
  *
@@ -868,4 +868,13 @@ typedef struct immap {
 #endif
 #define CONFIG_SYS_MPC83xx_USB_ADDR \
 			(CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_USB_OFFSET)
+
+#define CONFIG_SYS_TSEC1_OFFSET		0x24000
+#define TSEC_SIZE			0x01000
+
+#define CONFIG_SYS_MDIO1_OFFSET		0x24520
+#define TSEC_MDIO_OFFSET		0x01000
+
+#define TSEC_BASE_ADDR		(CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
+#define MDIO_BASE_ADDR		(CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
 #endif				/* __IMMAP_83xx__ */
include/asm-ppc/immap_85xx.h +9 -0
index 4194295..54b43b1 100644
@@ -1932,4 +1932,13 @@ typedef struct ccsr_gur {
 #define CONFIG_SYS_MPC85xx_USB_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB_OFFSET)
 
+/* TSEC and MDIO OFFSETS */
+#define CONFIG_SYS_TSEC1_OFFSET		0x24000
+
+#define CONFIG_SYS_MDIO1_OFFSET		0x24520
+#define TSEC_MDIO_OFFSET		0x01000
+
+#define TSEC_BASE_ADDR		(CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
+#define MDIO_BASE_ADDR		(CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
+
 #endif /*__IMMAP_85xx__*/
include/asm-ppc/immap_86xx.h +9 -1
index fdfc654..be2eadd 100644
@@ -1,7 +1,7 @@
 /*
  * MPC86xx Internal Memory Map
  *
- * Copyright(c) 2004 Freescale Semiconductor
+ * Copyright 2004 Freescale Semiconductor
  * Jeff Brown (Jeffrey at freescale.com)
  * Srikanth Srinivasan (srikanth.srinivasan at freescale.com)
  *
@@ -1298,4 +1298,12 @@ extern immap_t  *immr;
 #define CONFIG_SYS_MPC86xx_DMA_OFFSET	(0x21000)
 #define CONFIG_SYS_MPC86xx_DMA_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DMA_OFFSET)
 
+#define CONFIG_SYS_TSEC1_OFFSET		0x24000
+
+#define CONFIG_SYS_MDIO1_OFFSET		0x24520
+#define TSEC_MDIO_OFFSET		0x01000
+
+#define TSEC_BASE_ADDR		(CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
+#define MDIO_BASE_ADDR		(CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
+
 #endif /*__IMMAP_86xx__*/
include/tsec.h +22 -22

90 lines not on this page · raw message

Signature · 1 line
1.5.2.2
#1 lore raw

PATCH v3 1/2 NET: Move MDIO regs out of TSEC Space

Quoted 8 lines · On Thu, 29 Oct 2009 19:30:44 +0530 Sandeep Gopalpet…

Moved the mdio regs out of the tsec structure,and provided different offsets for tsec base and mdio base so that provision for etsec2.0 can be provided.

This patch helps in providing the support for etsec2.0 In etsec2.0, the MDIO register space and the etsec reg space are different.

Quoted 5 lines

Also, moved the TSEC_BASE_ADDR and MDIO_BASE_ADDR definitons into platform specific files.

---

subject should say v4, but anyway, with the following CodingStyle fixes:

include/tsec.h +2 -2
index fc2f075..e33ef61 100644
@@ -27,7 +27,7 @@
 	.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)), \
 	.miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR), \
 	.miiregs_sgmii = (tsec_mdio_t *)(MDIO_BASE_ADDR \
-					+ (num - 1) * TSEC_MDIO_OFFSET), \
+					 + (num - 1) * TSEC_MDIO_OFFSET), \
 	.devname = CONFIG_TSEC##num##_NAME, \
 	.phyaddr = TSEC##num##_PHY_ADDR, \
 	.flags = TSEC##num##_FLAGS \
@@ -38,7 +38,7 @@
 	x.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)); \
 	x.miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR); \
 	x.miiregs_sgmii = (tsec_mdio_t *)(MDIO_BASE_ADDR \
-					 + (num - 1) * TSEC_MDIO_OFFSET); \
+					  + (num - 1) * TSEC_MDIO_OFFSET); \
 	x.devname = CONFIG_TSEC##num##_NAME; \
 	x.phyaddr = TSEC##num##_PHY_ADDR; \
 	x.flags = TSEC##num##_FLAGS;\