Skip to contentSkip to conversation

xfs: cleanup data end I/O handlers

PATCH In review Christoph Hellwig 2 participants 2 messages Oct 30, 2009 – Nov 3, 2009 XFS filesystem

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 xfs: cleanup data end I/O handlers

Currently we have various different end I/O handler for read vs the different types of write I/O. But they are all very similar so we could just use one with a few conditionals and reduce code size a lot.

fs/xfs/linux-2.6/xfs_aops.c +25 -68
Index: linux-2.6/fs/xfs/linux-2.6/xfs_aops.c
===================================================================
@@ -235,71 +235,36 @@ xfs_setfilesize(
 }
 
 /*
- * Buffered IO write completion for delayed allocate extents.
+ * IO write completion.
  */
 STATIC void
-xfs_end_bio_delalloc(
-	struct work_struct	*work)
-{
-	xfs_ioend_t		*ioend =
-		container_of(work, xfs_ioend_t, io_work);
-
-	xfs_setfilesize(ioend);
-	xfs_destroy_ioend(ioend);
-}
-
-/*
- * Buffered IO write completion for regular, written extents.
- */
-STATIC void
-xfs_end_bio_written(
-	struct work_struct	*work)
-{
-	xfs_ioend_t		*ioend =
-		container_of(work, xfs_ioend_t, io_work);
-
-	xfs_setfilesize(ioend);
-	xfs_destroy_ioend(ioend);
-}
-
-/*
- * IO write completion for unwritten extents.
- *
- * Issue transactions to convert a buffer range from unwritten
- * to written extents.
- */
-STATIC void
-xfs_end_bio_unwritten(
+xfs_end_io(
 	struct work_struct	*work)
 {
 	xfs_ioend_t		*ioend =
 		container_of(work, xfs_ioend_t, io_work);
 	struct xfs_inode	*ip = XFS_I(ioend->io_inode);
-	xfs_off_t		offset = ioend->io_offset;
-	size_t			size = ioend->io_size;
 
-	if (likely(!ioend->io_error)) {
-		if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) {
-			int error;
-			error = xfs_iomap_write_unwritten(ip, offset, size);
-			if (error)
-				ioend->io_error = error;
-		}
-		xfs_setfilesize(ioend);
+	/*
+	 * For unwritten extents we need to issue transactions to convert a
+	 * range to normal written extens after the data I/O has finished.
+	 */
+	if (ioend->io_type == IOMAP_UNWRITTEN &&
+	    likely(!ioend->io_error && !XFS_FORCED_SHUTDOWN(ip->i_mount))) {
+		int error;
+
+		error = xfs_iomap_write_unwritten(ip, ioend->io_offset,
+						 ioend->io_size);
+		if (error)
+			ioend->io_error = error;
 	}
-	xfs_destroy_ioend(ioend);
-}
-
-/*
- * IO read completion for regular, written extents.
- */
-STATIC void
-xfs_end_bio_read(
-	struct work_struct	*work)
-{
-	xfs_ioend_t		*ioend =
-		container_of(work, xfs_ioend_t, io_work);
 
+	/*
+	 * We might have to update the on-disk file size after extending
+	 * writes.
+	 */
+	if (ioend->io_type != IOMAP_READ)
+		xfs_setfilesize(ioend);
 	xfs_destroy_ioend(ioend);
 }
 
@@ -314,10 +279,10 @@ xfs_finish_ioend(
 	int		wait)
 {
 	if (atomic_dec_and_test(&ioend->io_remaining)) {
-		struct workqueue_struct *wq = xfsdatad_workqueue;
-		if (ioend->io_work.func == xfs_end_bio_unwritten)
-			wq = xfsconvertd_workqueue;
+		struct workqueue_struct *wq;
 
+		wq = (ioend->io_type == IOMAP_UNWRITTEN) ?
+			xfsconvertd_workqueue : xfsdatad_workqueue;
 		queue_work(wq, &ioend->io_work);
 		if (wait)
 			flush_workqueue(wq);
@@ -355,15 +320,7 @@ xfs_alloc_ioend(
 	ioend->io_offset = 0;
 	ioend->io_size = 0;
 
-	if (type == IOMAP_UNWRITTEN)
-		INIT_WORK(&ioend->io_work, xfs_end_bio_unwritten);
-	else if (type == IOMAP_DELAY)
-		INIT_WORK(&ioend->io_work, xfs_end_bio_delalloc);
-	else if (type == IOMAP_READ)
-		INIT_WORK(&ioend->io_work, xfs_end_bio_read);
-	else
-		INIT_WORK(&ioend->io_work, xfs_end_bio_written);
-
+	INIT_WORK(&ioend->io_work, xfs_end_io);
 	return ioend;
 }
 
@@ -1538,7 +1495,7 @@ xfs_end_io_direct(
 		 * didn't map an unwritten extent so switch it's completion
 		 * handler.
 		 */
-		INIT_WORK(&ioend->io_work, xfs_end_bio_written);
+		ioend->io_type = IOMAP_NEW;
 		xfs_finish_ioend(ioend, 0);
 	}
 

_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs

Reviewed-by on v1 1/1
#1 lore raw
Quoted 3 lines · Christoph Hellwig

Currently we have various different end I/O handler for read vs the different types of write I/O. But they are all very similar so we could just use one with a few conditionals and reduce code size a lot.

When I was looking at the last patch I had the same thought, so I'm glad you did this.

The patch is good--here are a few thoughts so you can correct me if I'm misunderstanding something...

I note that you now call xfs_setfilesize() in the IOMAP_UNWRITTEN case even if there was an I/O error indicated, which is different from current code. But that's OK because xfs_setfilesize() checks for that condition, so the result is the same.

I also note that you no longer init the work queue at the end of a non-extending direct I/O write. But that too is OK, because it looks like the only reason it was initialized there was so that the work function pointer would change, for the benefit of xfs_finish_ioend(). But you changed that to make use of the io_type, which is a better way of doing it anyway.

In summary... Looks good, I like it.

Quoted 1 line
Quoted 137 lines

Index: linux-2.6/fs/xfs/linux-2.6/xfs_aops.c
===================================================================

fs/xfs/linux-2.6/xfs_aops.c +25 -68
@@ -235,71 +235,36 @@ xfs_setfilesize(
 }
 
 /*
- * Buffered IO write completion for delayed allocate extents.
+ * IO write completion.
  */
 STATIC void
-xfs_end_bio_delalloc(
-	struct work_struct	*work)
-{
-	xfs_ioend_t		*ioend =
-		container_of(work, xfs_ioend_t, io_work);
-
-	xfs_setfilesize(ioend);
-	xfs_destroy_ioend(ioend);
-}
-
-/*
- * Buffered IO write completion for regular, written extents.
- */
-STATIC void
-xfs_end_bio_written(
-	struct work_struct	*work)
-{
-	xfs_ioend_t		*ioend =
-		container_of(work, xfs_ioend_t, io_work);
-
-	xfs_setfilesize(ioend);
-	xfs_destroy_ioend(ioend);
-}
-
-/*
- * IO write completion for unwritten extents.
- *
- * Issue transactions to convert a buffer range from unwritten
- * to written extents.
- */
-STATIC void
-xfs_end_bio_unwritten(
+xfs_end_io(
 	struct work_struct	*work)
 {
 	xfs_ioend_t		*ioend =
 		container_of(work, xfs_ioend_t, io_work);
 	struct xfs_inode	*ip = XFS_I(ioend->io_inode);
-	xfs_off_t		offset = ioend->io_offset;
-	size_t			size = ioend->io_size;
 
-	if (likely(!ioend->io_error)) {
-		if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) {
-			int error;
-			error = xfs_iomap_write_unwritten(ip, offset, size);
-			if (error)
-				ioend->io_error = error;
-		}
-		xfs_setfilesize(ioend);
+	/*
+	 * For unwritten extents we need to issue transactions to convert a
+	 * range to normal written extens after the data I/O has finished.
+	 */
+	if (ioend->io_type == IOMAP_UNWRITTEN &&
+	    likely(!ioend->io_error && !XFS_FORCED_SHUTDOWN(ip->i_mount))) {
+		int error;
+
+		error = xfs_iomap_write_unwritten(ip, ioend->io_offset,
+						 ioend->io_size);
+		if (error)
+			ioend->io_error = error;
 	}
-	xfs_destroy_ioend(ioend);
-}
-
-/*
- * IO read completion for regular, written extents.
- */
-STATIC void
-xfs_end_bio_read(
-	struct work_struct	*work)
-{
-	xfs_ioend_t		*ioend =
-		container_of(work, xfs_ioend_t, io_work);
 
+	/*
+	 * We might have to update the on-disk file size after extending
+	 * writes.
+	 */
+	if (ioend->io_type != IOMAP_READ)
+		xfs_setfilesize(ioend);
 	xfs_destroy_ioend(ioend);
 }
 
@@ -314,10 +279,10 @@ xfs_finish_ioend(
 	int		wait)
 {
 	if (atomic_dec_and_test(&ioend->io_remaining)) {
-		struct workqueue_struct *wq = xfsdatad_workqueue;
-		if (ioend->io_work.func == xfs_end_bio_unwritten)
-			wq = xfsconvertd_workqueue;
+		struct workqueue_struct *wq;
 
+		wq = (ioend->io_type == IOMAP_UNWRITTEN) ?
+			xfsconvertd_workqueue : xfsdatad_workqueue;
 		queue_work(wq, &ioend->io_work);
 		if (wait)
 			flush_workqueue(wq);
@@ -355,15 +320,7 @@ xfs_alloc_ioend(
 	ioend->io_offset = 0;
 	ioend->io_size = 0;
 
-	if (type == IOMAP_UNWRITTEN)
-		INIT_WORK(&ioend->io_work, xfs_end_bio_unwritten);
-	else if (type == IOMAP_DELAY)
-		INIT_WORK(&ioend->io_work, xfs_end_bio_delalloc);
-	else if (type == IOMAP_READ)
-		INIT_WORK(&ioend->io_work, xfs_end_bio_read);
-	else
-		INIT_WORK(&ioend->io_work, xfs_end_bio_written);
-
+	INIT_WORK(&ioend->io_work, xfs_end_io);
 	return ioend;
 }
 
@@ -1538,7 +1495,7 @@ xfs_end_io_direct(
 		 * didn't map an unwritten extent so switch it's completion
 		 * handler.
 		 */
-		INIT_WORK(&ioend->io_work, xfs_end_bio_written);
+		ioend->io_type = IOMAP_NEW;
 		xfs_finish_ioend(ioend, 0);
 	}
 
Quoted 4 lines

_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs

_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs