Skip to contentSkip to conversation

Document the prctl/signal hwpoison extensions for 2.6.32

PATCH In review Andi Kleen 4 participants 7 messages Nov 6, 2009 – Jun 19, 2010 2 messages not in the archive Man-pages: manual pages for Linux -- Sections 2, 3, 4, 5, and 7

lore
Share & tools
lore

Andi Kleen

author
#0 lore raw

PATCH 1/3 Document the prctl/signal hwpoison extensions for 2.6.32

sigaction.2 renamed from sigaction.2-o +22 -1
diff -u man2/sigaction.2-o man2/sigaction.2
@@ -39,6 +39,7 @@
 .\" 2004-12-09, mtk, added SI_TKILL + other minor changes
 .\" 2005-09-15, mtk, split sigpending(), sigprocmask(), sigsuspend()
 .\"	out of this page into separate pages.
+.\" 2009-10-03 Andi Kleen, add hwpoison signal extensions
 .\"
 .TH SIGACTION 2 2009-07-25 "Linux" "Linux Programmer's Manual"
 .SH NAME
@@ -271,6 +272,7 @@
     void    *si_addr;     /* Memory location which caused fault */
     int      si_band;     /* Band event */
     int      si_fd;       /* File descriptor */
+    short    si_addr_lsb; /* Least Signifcant bit of address */
 }
 .fi
 .in
@@ -343,7 +345,20 @@
 .B SIGBUS
 fill in
 .I si_addr
-with the address of the fault.
+with the address of the fault. Some suberrors of 
+.I SIGBUS,
+in particular
+.B BUS_MCEERR_AO
+and 
+.B BUS_MCEERR_AR
+also fill in 
+.B si_addr_lsb
+This field defines the least significant bit of the reported address and therefore the extent of 
+the corruption. For example if a full page was corrupted it contains log2(get_page_size()).
+.I BUS_MCERR_*
+and
+.I si_addr_lsb
+are only available with Linux 2.6.32 and later and are a Linux specific extension.
 .B SIGPOLL
 fills in
 .IR si_band " and " si_fd .
@@ -483,6 +498,12 @@
 .TP
 .B BUS_OBJERR
 object-specific hardware error
+.TP
+.B BUS_MCEERR_AR
+hardware memory error consumed after a machine check: action required. Program cannot continue current execution stream. For this error the si_addr_lsb field is valid. Since Linux 2.6.32 and a Linux specific extension.
+.TP
+.B BUS_MCEERR_AO
+hardware memory error detected in process but not consumed: action optional. Program is allowed to continue current execution stream, but the page containing the reported address is corrupted. The extent of the corruption is defined by the si_addr_lsb field. Since Linux 2.6.32 and a Linux specific extension.
 .RE
 .PP
 The following values can be placed in
prctl.2 renamed from prctl.2-o +46 -0

64 lines not on this page · raw message

madvise.2 renamed from madvise.2-o +12 -1
@@ -141,6 +141,15 @@
 .BR MADV_DONTFORK ,
 restoring the default behavior, whereby a mapping is inherited across
 .BR fork (2).
+.TP
+.BR MADV_HWPOISON " (Since Linux 2.6.32)
+Poison a page and handle it like a hardware memory corruption.
+Only allowed for processes with
+.I CAP_SYS_ADMIN
+privileges. This may result in the calling process receiving a 
+.I SIGBUS
+and the page being unmapped.
+Intended for testing.
 .SH "RETURN VALUE"
 On success
 .BR madvise ()
@@ -148,6 +157,7 @@
 On error, it returns \-1 and
 .I errno
 is set appropriately.
+.\" XXX someone document the KSM extensions
 .SH ERRORS
 .TP
 .B EAGAIN
@@ -198,8 +208,9 @@
 
 .BR MADV_REMOVE ,
 .BR MADV_DONTFORK ,
+.BR MADV_DOFORK ,
 and
-.B MADV_DOFORK
+.BR MADV_HWPOISON 
 are Linux-specific.
 .SH NOTES
 .SS "Linux Notes"

--
To unsubscribe from this list: send the line "unsubscribe linux-man" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

A message that is not in the archive (sent off-list or not yet received): 20091106652.255147301-Vw/[email protected]

author
#2 lore raw

PATCH 2/3 Add missing migrate_pages manpage

Based on the move_pages manpage.
Also some minor improvements to move_pages.

migrate_pages.2 renamed from migrate_pages.2-o +130 -0
diff -u man2/migrate_pages.2-o man2/migrate_pages.2
@@ -0,0 +1,130 @@
+.\" Hey Emacs! This file is -*- nroff -*- source.
+.\"
+.\" Copyright 2009 Intel Coporation
+.\"                Author: Andi Kleen
+.\" Based on the move_pages manpage which was
+.\" This manpage is Copyright (C) 2006 Silicon Graphics, Inc.
+.\"                               Christoph Lameter
+.\"
+.\" Permission is granted to make and distribute verbatim copies of this
+.\" manual provided the copyright notice and this permission notice are
+.\" preserved on all copies.
+.\"
+.\" Permission is granted to copy and distribute modified versions of this
+.\" manual under the conditions for verbatim copying, provided that the
+.\" entire resulting derived work is distributed under the terms of a
+.\" permission notice identical to this one.
+.TH MIGRATE_PAGES 2 2009-11-01 "Linux" "Linux Programmer's Manual"
+.SH NAME
+migrate_pages \- move all pages in a process to another set of nodes
+.SH SYNOPSIS
+.nf
+.B #include <numaif.h>
+.sp
+.BI "long migrate_pages(int " pid ", unsigned long " maxnode", 
+.BI "                   const unsigned long * " old_nodes,
+.BI "                   const unsigned long * " new_nodes);
+.fi
+.sp
+Link with \fI\-lnuma\fP.
+.SH DESCRIPTION
+.BR migrate_pages ()
+moves all pages of the process
+.I pid
+that are in memory nodes
+.I old_nodes
+to
+.I new_nodes.
+Pages not placed in any node in
+.I old_nodes
+will not be migrated.
+The kernel keeps the relative topology relationship inside 
+.I old_nodes
+in 
+.I new_nodes
+as far as possible.
+
+.I old_nodes
+and
+.I new_nodes
+are pointers to bitmasks of node numbers, rounded to unsigned longs, with upto 
+.I maxnode
+bits.
+.I maxnode
+is the maximum node number in the bitmask plus one (this is the same 
+as in 
+.I mbind (2),
+but different from
+.I select (2))
+
+.I pid
+is the ID of the process in which pages are to be moved.
+To move pages in another process,
+the caller must be privileged
+.RB ( CAP_SYS_NICE )
+or the real or effective user ID of the calling process must match the
+real or saved-set user ID of the target process.
+If
+.I pid
+is 0 then
+.BR migrate_pages ()
+moves pages of the calling process.
+
+Pages shared with another process will only be moved if the initiating
+process has the
+.RB CAP_SYS_NICE
+privilege.
+.SH "RETURN VALUE"
+On success
+.BR migrate_pages ()
+returns zero.
+On error, it returns \-1, and sets
+.I errno
+to indicate the error.
+.\" .SH ERRORS
+.\" FIXME write me
+.SH VERSIONS
+.BR migrate_pages ()
+first appeared on Linux in version 2.6.16.
+.SH CONFORMING TO
+This system call is Linux-specific.
+.SH "NOTES"
+For information on library support, see
+.BR numa (7).
+
+Use
+.BR get_mempolicy (2)
+with the
+.B MPOL_F_MEMS_ALLOWED
+flag to obtain the set of nodes that are allowed by
+.\" FIXME Clarify "current cpuset".  Is that the cpuset of the caller
+.\" or the target?
+the current cpuset.
+Note that this information is subject to change at any
+time by manual or automatic reconfiguration of the cpuset.
+
+Use of this function may result in pages whose location
+(node) violates the memory policy established for the
+specified addresses (See
+.BR mbind (2)]
+and/or the specified process [See
+.BR set_mempolicy (2)).
+That is, memory policy does not constrain the destination
+nodes used by
+.BR migrate_pages ().
+
+The
+.I numaif.h
+header is not included with glibc, but requires installing
+.I libnuma-devel
+or a similar package.
+.SH "SEE ALSO"
+.BR get_mempolicy (2),
+.BR mbind (2),
+.BR set_mempolicy (2),
+.BR numa (3),
+.BR numa_maps (5),
+.BR cpuset (7),
+.BR numa (7),
+.BR migratepages (8),
+.BR numa_stat (8)
move_pages.2 renamed from move_pages.2-o +8 -0
diff -u man2/move_pages.2-o man2/move_pages.2
@@ -25,6 +25,8 @@
 .BI "long move_pages(int " pid ", unsigned long count, void **" pages ,
 .BI "                const int *" nodes ", int *" status ", int " flags );
 .fi
+.sp
+Link with \fI\-lnuma\fP.
 .SH DESCRIPTION
 .BR move_pages ()
 moves the specified
@@ -214,6 +216,12 @@
 That is, memory policy does not constrain the destination
 nodes used by
 .BR move_pages ().
+
+The
+.I numaif.h
+header is not included with glibc, but requires installing
+.I libnuma-devel
+or a similar package.
 .SH "SEE ALSO"
 .BR get_mempolicy (2),
 .BR mbind (2),

--
To unsubscribe from this list: send the line "unsubscribe linux-man" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

A message that is not in the archive (sent off-list or not yet received): 20091106175212.4368EB1627-Oisruko67ZwogZNkvFMw5WD2FQJk+8+b@public.gmane.org

#4 lore raw

Re: [PATCH] [2/3] Add missing migrate_pages manpage

migrate_pages.2 line 38

Quoted 7 lines · Andi Kleen
migrate_pages.2 renamed from migrate_pages.2-o +7 -0
+moves all pages of the process
+.I pid
+that are in memory nodes
+.I old_nodes
+to
+.I new_nodes.
+Pages not placed in any node in

in -> on?

migrate_pages.2 line 102

Quoted 8 lines
migrate_pages.2 renamed from migrate_pages.2-o +8 -0
+Use
+.BR get_mempolicy (2)
+with the
+.B MPOL_F_MEMS_ALLOWED
+flag to obtain the set of nodes that are allowed by
+.\" FIXME Clarify "current cpuset".  Is that the cpuset of the caller
+.\" or the target?
+the current cpuset.

get_mempolicy is restricted to the cpuset of the caller. What target?

If you are talking about migrate_pages() then the restriction is that the targets have to be within the callers cpuset.

--
To unsubscribe from this list: send the line "unsubscribe linux-man" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

author
#5 lore raw

Re: [PATCH] [2/3] Add missing migrate_pages manpage

Quoted 11 lines · Christoph Lameter

migrate_pages.2 line 38

Quoted 7 lines · Andi Kleen
migrate_pages.2 renamed from migrate_pages.2-o +7 -0
+moves all pages of the process
+.I pid
+that are in memory nodes
+.I old_nodes
+to
+.I new_nodes.
+Pages not placed in any node in

in -> on?

Probably.

Quoted 12 lines

migrate_pages.2 line 102

Quoted 9 lines
migrate_pages.2 renamed from migrate_pages.2-o +8 -0
+Use
+.BR get_mempolicy (2)
+with the
+.B MPOL_F_MEMS_ALLOWED
+flag to obtain the set of nodes that are allowed by
+.\" FIXME Clarify "current cpuset".  Is that the cpuset of the caller
+.\" or the target?
+the current cpuset.

get_mempolicy is restricted to the cpuset of the caller. What target?

Quoted 2 lines

If you are talking about migrate_pages() then the restriction is that the targets have to be within the callers cpuset.

I just copied that from the other manpage (it started as a copy), I haven't really thought about that.

-Andi

Signature · 5 lines
ak-VuQAYsv1563Yd54FQh9/[email protected] -- Speaking for myself only.
--
To unsubscribe from this list: send the line "unsubscribe linux-man" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#6 lore raw

Re: [PATCH] [2/3] Add missing migrate_pages manpage

In reply to Christoph Lameter

Hi Christoph,

A long time after the fact, but...

Quoted 23 lines · Christoph Lameter

migrate_pages.2 line 38

Quoted 7 lines · Andi Kleen
migrate_pages.2 renamed from migrate_pages.2-o +7 -0
+moves all pages of the process
+.I pid
+that are in memory nodes
+.I old_nodes
+to
+.I new_nodes.
+Pages not placed in any node in

in -> on?

migrate_pages.2 line 102

Quoted 8 lines
migrate_pages.2 renamed from migrate_pages.2-o +8 -0
+Use
+.BR get_mempolicy (2)
+with the
+.B MPOL_F_MEMS_ALLOWED
+flag to obtain the set of nodes that are allowed by
+.\" FIXME Clarify "current cpuset".  Is that the cpuset of the caller
+.\" or the target?
+the current cpuset.

get_mempolicy is restricted to the cpuset of the caller. What target?

Quoted 2 lines

If you are talking about migrate_pages() then the restriction is that the targets have to be within the callers cpuset.

Thanks for that clarification. I have added it to the current draft of the page.

Cheers,

Michael

Signature · 7 lines
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Author of "The Linux Programming Interface" http://blog.man7.org/
--
To unsubscribe from this list: send the line "unsubscribe linux-man" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
author
#7 lore raw

PATCH 3/3 Better documentation for the siginfo_t passed to signal handlers

In reply to a message not in the archive
signal.7 renamed from signal.7-o +25 -0
diff -u man7/signal.7-o man7/signal.7
@@ -40,6 +40,7 @@
 .\"     Added section on system call restarting (SA_RESTART)
 .\"     Added section on stop/cont signals interrupting syscalls.
 .\" 2008-10-05, mtk: various additions
+.\" 2009-10-03, Andi Kleen: add reference to implicit siginfo_t
 .\"
 .TH SIGNAL 7  2008-10-15 "Linux" "Linux Programmer's Manual"
 .SH NAME
@@ -328,6 +329,30 @@
 .B SIGIO
 (which is not specified in POSIX.1-2001) is ignored by default
 on several other Unix systems.
+
+Some of these signals, carry special additional information in a siginfo_t argument,
+clarifying why they were sent.
+.TS
+l l
+_____
+lB l.
+Signal                    siginfo_t fields
+SIGKILL                   si_pid, si_uid
+SIGCHLD                   si_pid, si_uid, si_status, si_utime, si_stime
+SIGILL                    si_code, si_addr, si_trapno
+SIGFPE                    si_code, si_addr, si_trapno
+SIGSEGV                   si_code, si_addr, si_trapno
+SIGBUS                    si_code, si_addr, si_trapno, si_addr_lsb
+SIGTRAP                   si_code, si_addr, si_trapno
+SIGPOLL                   si_band, si_fd
+realtime signals > 32     si_pid, si_uid, si_value
+posix timer               si_tid, si_overrun, si_sigval
+.TE
+
+Please see the 
+.I sigaction(2)
+manpage for more details on the various fields
+
 .SS "Real-time Signals"
 Linux supports real-time signals as originally defined in the POSIX.1b
 real-time extensions (and now included in POSIX.1-2001).

--
To unsubscribe from this list: send the line "unsubscribe linux-man" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

#8 lore raw
In reply to a message not in the archive

Hi Andi,

Earlier, I missed you MADV_HWPOISON patch.

I applied the following slightly modified version of your patch. Could you please review:

man2/madvise.2 +14 -1
@@ -144,6 +144,18 @@ Undo the effect of
 .BR MADV_DONTFORK ,
 restoring the default behavior, whereby a mapping is inherited across
 .BR fork (2).
+.TP
+.BR MADV_HWPOISON " (Since Linux 2.6.32)
+Poison a page and handle it like a hardware memory corruption.
+This operation is only available for privileged
+.RB ( CAP_SYS_ADMIN )
+processes.
+This operation may result in the calling process receiving a
+.B SIGBUS
+and the page being unmapped.
+This feature is intended for memory testing.
+This feature is only available if the kernel was configured with
+.BR CONFIG_MEMORY_FAILURE .
 .SH "RETURN VALUE"
 On success
 .BR madvise ()
@@ -201,8 +213,9 @@ for file access.
 
 .BR MADV_REMOVE ,
 .BR MADV_DONTFORK ,
+.BR MADV_DOFORK ,
 and
-.B MADV_DOFORK
+.BR MAD_HWPOISON
 are Linux-specific.
 .SH NOTES
 .SS "Linux Notes"

Cheers,

Michael

Quoted 163 lines · Andi Kleen

diff -u man2/sigaction.2-o man2/sigaction.2

sigaction.2    2009-10-03 21:49:25.000000000 +0200 renamed from sigaction.2-o  2009-10-03 21:38:22.000000000 +0200 +0 -0
@@ -39,6 +39,7 @@

 .\" 2004-12-09, mtk, added SI_TKILL + other minor changes .\" 2005-09-15, mtk, split sigpending(), sigprocmask(), sigsuspend() .\"    out of this page into separate pages.
+.\" 2009-10-03 Andi Kleen, add hwpoison signal extensions .\"
 .TH SIGACTION 2 2009-07-25 "Linux" "Linux Programmer's Manual" .SH NAME

sigaction.2    2009-10-03 21:49:25.000000000 +0200 renamed from sigaction.2-o  2009-10-03 21:38:22.000000000 +0200 +0 -0
@@ -271,6 +272,7 @@

    void    *si_addr;     /* Memory location which caused fault */ int      si_band;     /* Band event */
    int      si_fd;       /* File descriptor */
+    short    si_addr_lsb; /* Least Signifcant bit of address */ }
 .fi
 .in

sigaction.2    2009-10-03 21:49:25.000000000 +0200 renamed from sigaction.2-o  2009-10-03 21:38:22.000000000 +0200 +0 -0
@@ -343,7 +345,20 @@

 .B SIGBUS
 fill in
 .I si_addr

sigaction.2    2009-10-03 21:49:25.000000000 +0200 renamed from sigaction.2-o  2009-10-03 21:38:22.000000000 +0200 +14 -1
-with the address of the fault.
+with the address of the fault. Some suberrors of
+.I SIGBUS,
+in particular
+.B BUS_MCEERR_AO
+and
+.B BUS_MCEERR_AR
+also fill in
+.B si_addr_lsb
+This field defines the least significant bit of the reported address and therefore the extent of
+the corruption. For example if a full page was corrupted it contains log2(get_page_size()).
+.I BUS_MCERR_*
+and
+.I si_addr_lsb
+are only available with Linux 2.6.32 and later and are a Linux specific extension.

 .B SIGPOLL
 fills in
 .IR si_band " and " si_fd .

sigaction.2    2009-10-03 21:49:25.000000000 +0200 renamed from sigaction.2-o  2009-10-03 21:38:22.000000000 +0200 +0 -0
@@ -483,6 +498,12 @@

 .TP
 .B BUS_OBJERR
 object-specific hardware error
+.TP
+.B BUS_MCEERR_AR

sigaction.2    2009-10-03 21:49:25.000000000 +0200 renamed from sigaction.2-o  2009-10-03 21:38:22.000000000 +0200 +4 -0
+hardware memory error consumed after a machine check: action required. Program cannot continue current execution stream. For this error the si_addr_lsb field is valid. Since Linux 2.6.32 and a Linux specific extension.
+.TP
+.B BUS_MCEERR_AO
+hardware memory error detected in process but not consumed: action optional. Program is allowed to continue current execution stream, but the page containing the reported address is corrupted. The extent of the corruption is defined by the si_addr_lsb field. Since Linux 2.6.32 and a Linux specific extension.

 .RE
 .PP
 The following values can be placed in
diff -u man2/prctl.2-o man2/prctl.2

prctl.2        2009-11-06 18:35:35.000000000 +0100 renamed from prctl.2-o      2009-10-03 23:29:33.000000000 +0200 +0 -0
@@ -37,6 +37,7 @@

 .\" 2008-06-13 Erik Bosman, <[email protected]> .\"     Document PR_GET_TSC and PR_SET_TSC.
 .\" 2008-06-15 mtk, Document PR_SET_SECCOMP, PR_GET_SECCOMP +.\" 2009-10-03 Andi Kleen, document PR_MCE_KILL_*
 .\"
 .TH PRCTL 2 2008-07-16 "Linux" "Linux Programmer's Manual" .SH NAME

prctl.2        2009-11-06 18:35:35.000000000 +0100 renamed from prctl.2-o      2009-10-03 23:29:33.000000000 +0200 +0 -0
@@ -318,6 +319,45 @@
  for information on versions and architectures)

 Return unaligned access control bits, in the location pointed to by .IR "(int\ *) arg2" .
+.TP
+.BR PR_MCE_KILL

prctl.2        2009-11-06 18:35:35.000000000 +0100 renamed from prctl.2-o      2009-10-03 23:29:33.000000000 +0200 +37 -0
+(Since Linux 2.6.32)
+Set the machine check memory corruption kill policy for the current thread.
+When
+.I arg2
+is
+.B PR_MCE_KILL_CLEAR
+clear thread memory corruption kill policy and use system-wide default.
+When
+.I arg2
+is
+.B PR_MCE_KILL_SET
+use a thread-specific memory corruption kill policy.   In this case
+.I arg3
+defines whether the policy is
+.I early kill (
+.B PR_MCE_KILL_EARLY
+)
+or
+.I late kill (
+.B PR_MCE_KILL_LATE
+) or
+.B PR_MCE_KILL_DEFAULT.
+Early kill means that the task receives a
+.I SIGBUS
+signal as soon as hardware memory corruption is detected inside its address space.
+In late kill mode the process is only killed when it accesses a corrupted page.
+See
+.I sigaction(2)
+for more information on the
+.I SIGBUS.
+The policy is inherited by children.
+Unused arguments upto 6 must be zero for future compatibility.
+.TP
+.BR PR_MCE_KILL_GET
+returns the current per process machine check kill policy as defined above.
+All following arguments upto 6 must be 0.
+

 .SH "RETURN VALUE"
 On success,
 .BR PR_GET_DUMPABLE ,

prctl.2        2009-11-06 18:35:35.000000000 +0100 renamed from prctl.2-o      2009-10-03 23:29:33.000000000 +0200 +0 -0
@@ -400,6 +440,12 @@

 The
 .BR prctl ()
 system call was introduced in Linux 2.1.57.

prctl.2        2009-11-06 18:35:35.000000000 +0100 renamed from prctl.2-o      2009-10-03 23:29:33.000000000 +0200 +6 -0
+
+The
+.I PR_MCE_KILL
+and
+.I PR_MCE_KILL_GET
+suboptions were introduced with Linux 2.6.32.

 .\" The library interface was added in glibc 2.0.6 .SH "CONFORMING TO"
 This call is Linux-specific.

madvise.2      2009-11-06 18:49:54.000000000 +0100 renamed from madvise.2-o    2009-11-06 18:45:57.000000000 +0100 +0 -0
@@ -141,6 +141,15 @@
  .BR MADV_DONTFORK ,

 restoring the default behavior, whereby a mapping is inherited across .BR fork (2).
+.TP
+.BR MADV_HWPOISON " (Since Linux 2.6.32)

madvise.2      2009-11-06 18:49:54.000000000 +0100 renamed from madvise.2-o    2009-11-06 18:45:57.000000000 +0100 +7 -0
+Poison a page and handle it like a hardware memory corruption.
+Only allowed for processes with
+.I CAP_SYS_ADMIN
+privileges. This may result in the calling process receiving a
+.I SIGBUS
+and the page being unmapped.
+Intended for testing.

 .SH "RETURN VALUE"
 On success
 .BR madvise ()

madvise.2      2009-11-06 18:49:54.000000000 +0100 renamed from madvise.2-o    2009-11-06 18:45:57.000000000 +0100 +0 -0
@@ -148,6 +157,7 @@

 On error, it returns \-1 and
 .I errno
 is set appropriately.
+.\" XXX someone document the KSM extensions
 .SH ERRORS
 .TP
 .B EAGAIN

madvise.2      2009-11-06 18:49:54.000000000 +0100 renamed from madvise.2-o    2009-11-06 18:45:57.000000000 +0100 +1 -0
@@ -198,8 +208,9 @@
 
  .BR MADV_REMOVE ,
  .BR MADV_DONTFORK ,
+.BR MADV_DOFORK ,

 and
-.B MADV_DOFORK
+.BR MADV_HWPOISON
 are Linux-specific.
 .SH NOTES
 .SS "Linux Notes"

Signature · 7 lines
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Author of "The Linux Programming Interface" http://blog.man7.org/
--
To unsubscribe from this list: send the line "unsubscribe linux-man" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html