acpica: Rewrite GPE handling
Subsystems (2)
A message that is not in the archive (sent off-list or not yet received): 4911F71203A09E4D9981D27F9D83085837684E6D@orsmsx503.amr.corp.intel.com
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): 4911F71203A09E4D9981D27F9D830858376D879E@orsmsx503.amr.corp.intel.com
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): 7276C2EDBEF0FA4AAA4A8FAD7DE3436531596BE0@orsmsx503.amr.corp.intel.com
A message that is not in the archive (sent off-list or not yet received): 4911F71203A09E4D9981D27F9D830858376D905E@orsmsx503.amr.corp.intel.com
cover acpica: Rewrite GPE handling
This is a rework of my original set of GPE rework patches. The principle difference is that I've readded the scan of _PWR methods in the initial GPE parsing - though there's little distinction between runtime and wakeup GPEs after this patchset (other than whether they can wake the system), it's still necessary to do this in order to retain the existing behaviour of enabling all GPEs with methods *except* for those that are able to wake the system.
Signature · 1 line
Matthew Garrett | [email protected]
PATCH 1/3 ACPI: Add infrastructure for refcounting GPE consumers
ACPI GPEs may map to multiple devices. The current GPE interface only provides a mechanism for enabling and disabling GPEs, making it difficult to change the state of GPEs at runtime without extensive cooperation between devices. Add an API to allow devices to indicate whether or not they want their device's GPE to be enabled for both runtime and wakeup events.
--- drivers/acpi/acpica/aclocal.h | 2 + drivers/acpi/acpica/evxfevnt.c | 161 ++++++++++++++++++++++++++++++++++++++++ include/acpi/acpixf.h | 8 ++ 3 files changed, 171 insertions(+), 0 deletions(-)
drivers/acpi/acpica/aclocal.h +2 -0
@@ -426,6 +426,8 @@ struct acpi_gpe_event_info {struct acpi_gpe_register_info *register_info;/* Backpointer to register info */ u8 flags;/* Misc info about this GPE */ u8 gpe_number;/* This GPE */ +u8 runtime_count; +u8 wakeup_count; };/* Information about a GPE register pair, one per each status/enable pair in an array */
drivers/acpi/acpica/evxfevnt.c +161 -0
167 lines not on this page · raw message
include/acpi/acpixf.h +8 -0
@@ -282,6 +282,14 @@ acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status);*/ acpi_status acpi_set_gpe_type (acpi_handle gpe_device,u32 gpe_number,u8 type); +acpi_status acpi_ref_runtime_gpe (acpi_handle gpe_device,u32 gpe_number); + +acpi_status acpi_unref_runtime_gpe (acpi_handle gpe_device,u32 gpe_number); + +acpi_status acpi_ref_wakeup_gpe (acpi_handle gpe_device,u32 gpe_number); + +acpi_status acpi_unref_wakeup_gpe (acpi_handle gpe_device,u32 gpe_number); +acpi_status acpi_enable_gpe (acpi_handle gpe_device,u32 gpe_number);acpi_status acpi_disable_gpe (acpi_handle gpe_device,u32 gpe_number);
Signature · 1 line
1.6.5.2
PATCH 2/3 ACPI: Add support for new refcounted GPE API to drivers
Add GPE refcounting support to ACPI drivers that need it. This will currently do little until the core is changed over to use the new behaviour.
--- drivers/acpi/button.c | 12 ++++++++++++ drivers/acpi/ec.c | 4 +++- drivers/acpi/wakeup.c | 6 ++++++ 3 files changed, 21 insertions(+), 1 deletions(-)
drivers/acpi/button.c +12 -0
@@ -420,6 +420,10 @@ static int acpi_button_add(struct acpi_device *device) ACPI_GPE_TYPE_WAKE_RUN);acpi_enable_gpe (device->wakeup.gpe_device, device->wakeup.gpe_number); +acpi_ref_runtime_gpe (device->wakeup.gpe_device, + device->wakeup.gpe_number); +acpi_ref_wakeup_gpe (device->wakeup.gpe_device, + device->wakeup.gpe_number); device->wakeup.state.enabled =1 ; }
@@ -439,6 +443,14 @@ static int acpi_button_remove(struct acpi_device *device, int type) {struct acpi_button *button =acpi_driver_data (device); +if (device->wakeup.flags.valid) { +acpi_unref_runtime_gpe (device->wakeup.gpe_device, + device->wakeup.gpe_number); +acpi_unref_wakeup_gpe (device->wakeup.gpe_device, + device->wakeup.gpe_number); + device->wakeup.state.enabled =0 ; + } +acpi_button_remove_fs (device);input_unregister_device (button->input);kfree (button);
drivers/acpi/ec.c +3 -1
@@ -755,7 +755,7 @@ static int ec_install_handlers(struct acpi_ec *ec)if (ACPI_FAILURE (status))return -ENODEV ;acpi_set_gpe_type (NULL , ec->gpe,ACPI_GPE_TYPE_RUNTIME ); -acpi_enable_gpe (NULL , ec->gpe); +acpi_ref_runtime_gpe (NULL , ec->gpe); status = acpi_install_address_space_handler(ec->handle, ACPI_ADR_SPACE_EC, &acpi_ec_space_handler,
@@ -772,6 +772,7 @@ static int ec_install_handlers(struct acpi_ec *ec) }else {acpi_remove_gpe_handler (NULL , ec->gpe, &acpi_ec_gpe_handler); +acpi_unref_runtime_gpe (NULL , ec->gpe);return -ENODEV ; } }
@@ -782,6 +783,7 @@ static int ec_install_handlers(struct acpi_ec *ec)static void ec_remove_handlers (struct acpi_ec *ec) { +acpi_unref_runtime_gpe (NULL , ec->gpe);if (ACPI_FAILURE (acpi_remove_address_space_handler (ec->handle,ACPI_ADR_SPACE_EC , &acpi_ec_space_handler)))pr_err (PREFIX "failed to remove space handler\n" );
drivers/acpi/wakeup.c +6 -0
@@ -81,6 +81,8 @@ void acpi_enable_wakeup_device(u8 sleep_state)if (!dev->wakeup.flags.run_wake)acpi_enable_gpe (dev->wakeup.gpe_device, dev->wakeup.gpe_number); +acpi_ref_wakeup_gpe (dev->wakeup.gpe_device, + dev->wakeup.gpe_number); } }
@@ -121,6 +123,8 @@ void acpi_disable_wakeup_device(u8 sleep_state)acpi_clear_gpe (dev->wakeup.gpe_device, dev->wakeup.gpe_number,ACPI_NOT_ISR ); } +acpi_unref_wakeup_gpe (dev->wakeup.gpe_device, + dev->wakeup.gpe_number); } }
@@ -141,6 +145,8 @@ int __init acpi_wakeup_device_init(void) ACPI_GPE_TYPE_WAKE_RUN);acpi_enable_gpe (dev->wakeup.gpe_device, dev->wakeup.gpe_number); +acpi_ref_wakeup_gpe (dev->wakeup.gpe_device, + dev->wakeup.gpe_number); dev->wakeup.state.enabled =1 ; }mutex_unlock (&acpi_device_lock);
Signature · 1 line
1.6.5.2
PATCH 3/3 ACPI: Remove old GPE API and transition code entirely to new one
Remove the old GPE type handling entirely, which gets rid of various quirks like the implicit disabling with GPE type setting. This requires a small amount of rework in order to ensure that non-wake GPEs are enabled by default to preserve existing behaviour.
--- drivers/acpi/acpica/acevents.h | 6 +-- drivers/acpi/acpica/evgpe.c | 147 ++++------------------------------------ drivers/acpi/acpica/evgpeblk.c | 67 ++++++------------- drivers/acpi/acpica/evxface.c | 14 ---- drivers/acpi/acpica/evxfevnt.c | 48 +------------- drivers/acpi/button.c | 5 -- drivers/acpi/ec.c | 2 +- drivers/acpi/wakeup.c | 55 +++------------- include/acpi/actypes.h | 32 +++------ 9 files changed, 58 insertions(+), 318 deletions(-)
drivers/acpi/acpica/acevents.h +1 -5
@@ -76,8 +76,7 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node *node,* evgpe - GPE handling and dispatch */ acpi_status -acpi_ev_update_gpe_enable_masks (struct acpi_gpe_event_info *gpe_event_info, -u8 type); +acpi_ev_update_gpe_enable_masks (struct acpi_gpe_event_info *gpe_event_info); acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info,
@@ -122,9 +121,6 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info,u32 acpi_ev_gpe_detect (struct acpi_gpe_xrupt_info *gpe_xrupt_list);acpi_status -acpi_ev_set_gpe_type (struct acpi_gpe_event_info *gpe_event_info,u8 type); - -acpi_status acpi_ev_check_for_wake_only_gpe (struct acpi_gpe_event_info *gpe_event_info);acpi_status acpi_ev_gpe_initialize (void );
drivers/acpi/acpica/evgpe.c +14 -133
194 lines not on this page · raw message
drivers/acpi/acpica/evgpeblk.c +21 -46
111 lines not on this page · raw message
drivers/acpi/acpica/evxface.c +0 -14
@@ -617,13 +617,6 @@ acpi_install_gpe_handler(acpi_handle gpe_device, handler->context = context; handler->method_node = gpe_event_info->dispatch.method_node; -/* Disable the GPE before installing the handler */ - - status =acpi_ev_disable_gpe (gpe_event_info); -if (ACPI_FAILURE (status)) { - goto unlock_and_exit; - } -/* Install the handler */ flags =acpi_os_acquire_lock (acpi_gbl_gpe_lock);
@@ -707,13 +700,6 @@ acpi_remove_gpe_handler(acpi_handle gpe_device, goto unlock_and_exit; } -/* Disable the GPE before removing the handler */ - - status =acpi_ev_disable_gpe (gpe_event_info); -if (ACPI_FAILURE (status)) { - goto unlock_and_exit; - } -/* Make sure all deferred tasks are completed */ (void )acpi_ut_release_mutex (ACPI_MTX_EVENTS );
drivers/acpi/acpica/evxfevnt.c +2 -46
66 lines not on this page · raw message
drivers/acpi/button.c +0 -5
@@ -415,11 +415,6 @@ static int acpi_button_add(struct acpi_device *device)if (device->wakeup.flags.valid) {/* Button's GPE is run-wake GPE */ -acpi_set_gpe_type (device->wakeup.gpe_device, - device->wakeup.gpe_number, -ACPI_GPE_TYPE_WAKE_RUN ); -acpi_enable_gpe (device->wakeup.gpe_device, - device->wakeup.gpe_number);acpi_ref_runtime_gpe (device->wakeup.gpe_device, device->wakeup.gpe_number); acpi_ref_wakeup_gpe(device->wakeup.gpe_device,
drivers/acpi/ec.c +1 -1
@@ -754,7 +754,7 @@ static int ec_install_handlers(struct acpi_ec *ec) &acpi_ec_gpe_handler, ec);if (ACPI_FAILURE (status))return -ENODEV ; -acpi_set_gpe_type (NULL , ec->gpe,ACPI_GPE_TYPE_RUNTIME ); +acpi_ref_runtime_gpe (NULL , ec->gpe); status = acpi_install_address_space_handler(ec->handle, ACPI_ADR_SPACE_EC,
drivers/acpi/wakeup.c +9 -46
77 lines not on this page · raw message
include/acpi/actypes.h +10 -22
@@ -668,41 +668,29 @@ typedef u32 acpi_event_status;/* * GPE info flags - Per GPE -* +-+-+-+---+---+-+ -* |7|6|5|4:3|2:1|0| -* +-+-+-+---+---+-+ -* | | | | | | -* | | | | | +--- Interrupt type: Edge or Level Triggered -* | | | | +--- Type: Wake-only, Runtime-only, or wake/runtime +* +-+-+-+---+-+-+-+ +* |7|6|5|4:3|2|1|0| +* +-+-+-+---+-+-+-+ +* | | | | | | | +* | | | | | | +--- Interrupt type: Edge or Level Triggered +* | | | | | +--- GPE can wake the system +* | | | | +--- Unused * | | | +--- Type of dispatch -- to method, handler, or none -* | | +--- Enabled for runtime? -* | +--- Enabled for wake? +* | | +--- Unused +* | +--- Unused * +--- Unused */ #define ACPI_GPE_XRUPT_TYPE_MASK (u8) 0x01#define ACPI_GPE_LEVEL_TRIGGERED (u8) 0x01#define ACPI_GPE_EDGE_TRIGGERED (u8) 0x00 -#define ACPI_GPE_TYPE_MASK (u8) 0x06 -#define ACPI_GPE_TYPE_WAKE_RUN (u8) 0x06 -#define ACPI_GPE_TYPE_WAKE (u8) 0x02 -#define ACPI_GPE_TYPE_RUNTIME (u8) 0x04/* Default */ +#define ACPI_GPE_CAN_WAKE (u8) 0x02#define ACPI_GPE_DISPATCH_MASK (u8) 0x18#define ACPI_GPE_DISPATCH_HANDLER (u8) 0x08#define ACPI_GPE_DISPATCH_METHOD (u8) 0x10#define ACPI_GPE_DISPATCH_NOT_USED (u8) 0x00/* Default */ -#define ACPI_GPE_RUN_ENABLE_MASK (u8) 0x20 -#define ACPI_GPE_RUN_ENABLED (u8) 0x20 -#define ACPI_GPE_RUN_DISABLED (u8) 0x00/* Default */ - -#define ACPI_GPE_WAKE_ENABLE_MASK (u8) 0x40 -#define ACPI_GPE_WAKE_ENABLED (u8) 0x40 -#define ACPI_GPE_WAKE_DISABLED (u8) 0x00/* Default */ - -#define ACPI_GPE_ENABLE_MASK (u8) 0x60/* Both run/wake */ -/* * Flags for GPE and Lock interfaces */
Signature · 1 line
1.6.5.2