u-boot: How to read file from FAT filesystem on NorFlash MTD partition
Hello,
I hope I am not sending mail to the wrong mail list.
I am porting u-boot to our Xscale based board, with 32MB Nor Flash on board. And in this board, it is required that, the u-boot should be able to read some files from a FAT file system on one of the Nor Flash partitions. The Nor Flash is managed as MTD device under Linux OS.
In current u-boot implementation, I can use fatload to read files from mmc or USB storage device, which is also FAT filesystem. And I can also use fsload command to read files from JFFS2 filesytem on NorFlash or NandFlash.
But I found I cann't uses these command to read files from a FAT filesystem on NorFlash. I cann't format this partition to JFFS2 filesystem because it is exported to Windows/Linux host via USB gadget after system boots up.
Can someone tell me the best way to solve this problem, or give me some hints of which part of code I need to change?
I am creating a new command following fsload, using MTD devices in U-Boot, and try to mount the FAT filesystem, but failed at reading the real file data out,
although I can read the file name, the file size and the file start sector number out.
Signature · 3 lines
Best Regards Xianwei ZENG ----Linux Fans
Dear Xianwei Zeng,
Quoted 6 lines · In message <[email protected]> you…
In current u-boot implementation, I can use fatload to read files from mmc or USB storage device, which is also FAT filesystem. And I can also use fsload command to read files from JFFS2 filesytem on NorFlash or NandFlash.
Quoted 6 lines
But I found I cann't uses these command to read files from a FAT filesystem on NorFlash. I cann't format this partition to JFFS2 filesystem because it is exported to Windows/Linux host via USB gadget after system boots up.
Can someone tell me the best way to solve this problem, or give me some hints of which part of code I need to change?
It seems you did not enable mtdparts support in your configuration?
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Systems programmers are the high priests of a low cult.
-- R.S. BartonDear Wolfgang Denk,
Thank you for your reply.
Quoted 7 lines · Wolfgang Denk
Dear Xianwei Zeng,
In message <[email protected]>
Quoted 2 lines · you
But I found I cann't uses these command to read files from a FAT
filesystem
Quoted 10 lines
Quoted 1 line
on NorFlash. I cann't format this partition to JFFS2 filesystem because
it
Quoted 4 lines
is exported to Windows/Linux host via USB gadget after system boots up.
Can someone tell me the best way to solve this problem, or give me some hints of which part of code I need to change?
It seems you did not enable mtdparts support in your configuration?
Yes. I didn?t enable the mtdparts support. I will try it.
Do I need to write extra driver, for example something I was doing, writing FAT + MTD support?
I am reading the u-boot source code, but didn't get any hint about the FAT + MTD usage.
Signature · 3 lines
Best Regards Xianwei ZENG ----Linux Fans
Dear Xianwei Zeng,
Quoted 5 lines · In message <[email protected]> you…
Yes. I didn't enable the mtdparts support. I will try it.
Do I need to write extra driver, for example something I was doing, writing FAT + MTD support?
No, you don't need any special drivers.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Overdrawn? But I still have checks left!
Dear Wolfgang Denk,
Sorry for the simple question, but I can't find the document to guide me to read file from FAT file system in NOR FLASH.
Quoted 5 lines · Wolfgang Denk
Dear Xianwei Zeng,
In message <[email protected]>
Quoted 1 line · you
Quoted 8 lines
Quoted 4 lines
Yes. I didn't enable the mtdparts support. I will try it.
Do I need to write extra driver, for example something I was doing, writing FAT + MTD support?
No, you don't need any special drivers.
After I enbale CONFIG_CMD_MTDPARTS, I can get MTD partition information. For example, I set env to:
mtdids=nor0=smt300-nor mtdparts=mtdparts=smt300-nor:4608k at 0x00080000(sys)ro
And then I can use mtdparts command to list the partition info:
device nor0 <smt300-nor>, # parts = 1
#: name size offset mask_flags 0: sys 0x00480000 0x00080000 1
But I still don't know the way how to read file inside this FAT filesystem.
* Which command can do this? (fatload seems can not because the interface
is not known)
* From which verion u-boot supports this feature? Our u-boot is based
v2009.08. Do we
need to update to latest one? (v2009.11-rc1)
Any document you suggest me to read? u-boot/README is not enough.
Thank you very much.
Signature · 3 lines
Best Regards Xianwei ZENG ----Linux Fans
Hi,
Quoted 9 lines
But I still don't know the way how to read file inside this FAT filesystem.
* Which command can do this? (fatload seems can not because the interface
is not known)
* From which verion u-boot supports this feature? Our u-boot is based
v2009.08. Do weneed to update to latest one? (v2009.11-rc1)I check the document and didn't found the answer. So I have to write it by
myself.
I created a patch which provide two functions:
fat_norflash_init()
fat_norflash_load()
The user call these function in sequence to read file from FAT file system on Nor Flash.
Here is my code, it has not been cleaned for common use, so a little bit ugly:
common/fat_norflash.c new file +147 -0
@@ -0,0 +1,148 @@ +/* +* (C) Copyright 2009 +* Zeng Xianwei <[email protected]> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ +#include <config.h> +#include <common.h> +#include <asm/errno.h> +#include <asm/arch/hardware.h> +#include <part.h> +#include <flash.h> + +#ifdef CONFIG_FAT_NORFLASH + +/* #define DEBUG */ + +#ifdef DEBUG +#define DPRINTF(args...) printf(args) +#else +#define DPRINTF(args...) +#endif + +extern flash_info_t flash_info[]; +extern int fat_register_device (block_dev_desc_t * dev_desc,int part_no); + +static block_dev_desc_t norflash_dev; + +struct fat_norflash_info_t { +unsigned long start; +int size; +} fat_norflash_info; + +/* block read function, called by disk_read() in fat.c */ +static unsigned long +norflash_bread (int dev,ulong blknr,lbaint_t blkcnt,void *dst) +{ +ulong src = fat_norflash_info.start + blknr *512 ; + +DPRINTF ("== read: nr %ld cnt %ld src %lx dst %p ==\n" , + blknr, blkcnt, src, dst); +memcpy ((unsigned char *)dst, (unsigned char *)(src), blkcnt *512 ); + +return blkcnt; +} + +int fat_norflash_init (uint32_t address,int size) +{ +int bank, cnt; +flash_info_t *info; + +for (bank =0 ; bank <CONFIG_SYS_MAX_FLASH_BANKS ; ++bank) { + cnt =0 ; + info = &flash_info[bank]; + +/* Nothing to do if the bank doesn't exist */ +if (info->sector_count ==0 ) +continue ; +/* Found */ +if (address >= info->start[0 ] && + address < (info->start[0 ] + info->size)) { +break ; + } + } + +if (bank ==CONFIG_SYS_MAX_FLASH_BANKS ) +return -ENODEV ; + +if (size > info->size) { +printf ("Fat filesystem size exceeds entile flash size.\n" ); +return -EINVAL ; + } + +/* Valid flash infomation */ + fat_norflash_info.start = address; + fat_norflash_info.size = size; +sprintf ((char *)norflash_dev.vendor,"Flash ID: %ld" , info->flash_id); + +/* Initialize block layer */ + norflash_dev.blksz =512 ; + norflash_dev.lba = size /512 ; + norflash_dev.part_type =PART_TYPE_DOS ; + norflash_dev.dev =0 ; + norflash_dev.lun =0 ; + norflash_dev.type =DEV_TYPE_HARDDISK ; + norflash_dev.removable =0 ; + norflash_dev.block_read = norflash_bread; + norflash_dev.if_type =IF_TYPE_UNKNOWN ; + norflash_dev.priv = &fat_norflash_info; + +DPRINTF ("Fat FileSystem on NorFlash at %lx size %lu bytes (%luMB) " , + address, size, size / (1024 *1024 )); +return 0 ; +} + +int +fat_norflash_load (const char *filename,unsigned long load_addr, +unsigned long maxsize) +{ +struct fat_norflash_info_t *info = + (struct fat_norflash_info_t *)(norflash_dev.priv); +long size; +int ret; + +if (!norflash_dev.blksz) { +printf ("Fat on NorFlash has not been initialized.\n" ); +return -ENODEV ; + } + + ret =fat_register_device (&norflash_dev,1 ); +if (ret) { +printf ("Unable to use fat on nor flash at %lx err %d\n" , + info->start, ret); +return 1 ; + } + +if (maxsize > info->size) + maxsize = info->size; + +DPRINTF ("Load file \"%s\" to memory %lx\n" , filename, load_addr); + size =file_fat_read (filename, (unsigned char *) load_addr, maxsize); +if (size ==-1 ) { +printf ("Unable to read \"%s\" from FAT in NorFlash at %lx\n" , + filename, info->start); +return 1 ; + } + +printf ("\n%ld bytes read\n" , size); +return 0 ; +} +
Signature · 3 lines
Best Regards Xianwei ZENG ----Linux Fans