Skip to contentSkip to conversation

Pull request: nand flash next

U-Boot Applied Scott Wood 2 participants 2 messages Nov 13, 2009 – Nov 15, 2009

lore
Share & tools
lore

Scott Wood

author
#0 lore raw

The following changes since commit efe12bcec55c3d77b9ead56e62010d26b66781f3:
Stefan Roese (1):
ppc4xx: Katmai: Add chip_config command

are available in the git repository at:

git://git.denx.de/u-boot-nand-flash.git next

Amul Kumar Saha (2):
Flex-OneNAND driver support
ENV Variable support for Flex-OneNAND

David Brownell (1):
NAND: fix "raw" reads with ECC syndrome layouts

Mingkai Hu (2):
ppc/85xx: make boot from NAND full relocation to RAM
fsl_elbc_nand: remove the bbt descriptors relocation fixup

Peter Tyser (2):
cmd_nand: Remove duplicate include
cmd_nand: Move conditional compilation to Makefile

Sandeep Paulraj (7):
NAND: Update to support 64 bit device size
NAND: Correct the "chip_shift" calculation
NAND: Remove commented out code
NAND: Subpage shift for ecc_steps equal to 16
NAND: Updating comments/explanations in the NAND driver
NAND: Update check condition for nand_read_page_hwecc API
NAND: Don't walk past end of oobfree[]

 common/Makefile                     |    2 +-
 common/cmd_nand.c                   |   12 -
 common/env_onenand.c                |   10 +
 cpu/mpc85xx/u-boot-nand.lds         |    1 -
 drivers/mtd/nand/fsl_elbc_nand.c    |    4 -
 drivers/mtd/nand/nand_base.c        |  145 ++++++-
 drivers/mtd/nand/nand_bbt.c         |   41 ++-
 drivers/mtd/onenand/onenand_base.c  |  742 ++++++++++++++++++++++++++++++-----
 drivers/mtd/onenand/onenand_bbt.c   |   14 +-
 drivers/mtd/onenand/onenand_uboot.c |    4 +-
 include/configs/apollon.h           |    2 +
 include/linux/mtd/nand.h            |    2 +-
 include/linux/mtd/onenand.h         |   16 +-
 include/linux/mtd/onenand_regs.h    |   18 +-
 include/linux/mtd/partitions.h      |    4 +-
 include/onenand_uboot.h             |   10 +
 16 files changed, 866 insertions(+), 161 deletions(-)
#1 lore raw

Dear Scott Wood,

Quoted 41 lines · In message <[email protected]> you wrote:

The following changes since commit efe12bcec55c3d77b9ead56e62010d26b66781f3:
Stefan Roese (1):
ppc4xx: Katmai: Add chip_config command

are available in the git repository at:

git://git.denx.de/u-boot-nand-flash.git next

Amul Kumar Saha (2):
Flex-OneNAND driver support
ENV Variable support for Flex-OneNAND

David Brownell (1):
NAND: fix "raw" reads with ECC syndrome layouts

Mingkai Hu (2):
ppc/85xx: make boot from NAND full relocation to RAM
fsl_elbc_nand: remove the bbt descriptors relocation fixup

Peter Tyser (2):
cmd_nand: Remove duplicate include
cmd_nand: Move conditional compilation to Makefile

Sandeep Paulraj (7):
NAND: Update to support 64 bit device size
NAND: Correct the "chip_shift" calculation
NAND: Remove commented out code
NAND: Subpage shift for ecc_steps equal to 16
NAND: Updating comments/explanations in the NAND driver
NAND: Update check condition for nand_read_page_hwecc API
NAND: Don't walk past end of oobfree[]

 common/Makefile                     |    2 +-
 common/cmd_nand.c                   |   12 -
 common/env_onenand.c                |   10 +
 cpu/mpc85xx/u-boot-nand.lds         |    1 -
 drivers/mtd/nand/fsl_elbc_nand.c    |    4 -
 drivers/mtd/nand/nand_base.c        |  145 ++++++-
 drivers/mtd/nand/nand_bbt.c         |   41 ++-
 drivers/mtd/onenand/onenand_base.c  |  742 ++++++++++++++++++++++++++++++-----
 drivers/mtd/onenand/onenand_bbt.c   |   14 +-
Quoted 8 lines
 drivers/mtd/onenand/onenand_uboot.c |    4 +-
 include/configs/apollon.h           |    2 +
 include/linux/mtd/nand.h            |    2 +-
 include/linux/mtd/onenand.h         |   16 +-
 include/linux/mtd/onenand_regs.h    |   18 +-
 include/linux/mtd/partitions.h      |    4 +-
 include/onenand_uboot.h             |   10 +
 16 files changed, 866 insertions(+), 161 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"I haven't lost my mind - it's backed up on tape somewhere."