git-svn of both trunk and tags while having no access to the 'parent' of those
Dear Git People,
I've ran into a situation here:
there is a repository with trunk and releases (analog to tags there) available for public, but the rest of directories and their parent is not available without authentication... ie I can access
http://domain.com/svnrepo/trunk
http://domain.com/svnrepo/releases
but not
http://domain.com/svnrepo/
Whenever I use git-svn (1.6.5 in Debian):
git svn clone --prefix=upstream-svn/ -T trunk -t releases http://domain.com/svnrepo svnrepo.gitsvn
it asks for authentication... I guess, now I can only clone trunk and releases separately? or may be there is some way to avoid the problem, ie avoid looking 'into root'?
Thanks in advance!
Signature · 5 lines
Yaroslav O. Halchenko Postdoctoral Fellow, Department of Psychological and Brain Sciences Dartmouth College, 419 Moore Hall, Hinman Box 6207, Hanover, NH 03755 Phone: +1 (603) 646-9834 Fax: +1 (603) 646-1419 WWW: http://www.linkedin.com/in/yarik
Yaroslav Halchenko venit, vidit, dixit 17.11.2009 03:59:
Quoted 15 lines
Dear Git People,
I've ran into a situation here:
there is a repository with trunk and releases (analog to tags there) available for public, but the rest of directories and their parent is not available without authentication... ie I can access
http://domain.com/svnrepo/trunk
http://domain.com/svnrepo/releases
but not
http://domain.com/svnrepo/Whenever I use git-svn (1.6.5 in Debian):
Quoted 7 lines
git svn clone --prefix=upstream-svn/ -T trunk -t releases http://domain.com/svnrepo svnrepo.gitsvn
it asks for authentication... I guess, now I can only clone trunk and releases separately? or may be there is some way to avoid the problem, ie avoid looking 'into root'?
Thanks in advance!
Your problem description seems to match perfectly with the description of the "--no-minimize-url" option in git svn's man page. I'm sure it's worth a try.
Michael
Quoted 5 lines · Michael J Gruber
Quoted 1 line
git svn clone --prefix=upstream-svn/ -T trunk -t releases http://domain.com/svnrepo svnrepo.gitsvn
Your problem description seems to match perfectly with the description of the "--no-minimize-url" option in git svn's man page. I'm sure it's worth a try.
;-) oh I did I did ;)
I've used
git svn clone --no-minimize-url --prefix=upstream-svn/ -T trunk -t releases http://domain.com/svnrepo/trunk svnrepo.gitsvn
that initialized repository, went through a lengthy list of
trace: built-in: git 'config' 'svn-remote.svn.tags-maxRev' '...'
with last command reported
trace: built-in: git 'gc' '--auto'
and resulted in nothing being cloned/checked out or even a single ref. The only file under .git besides the ones created by git init
./svn/refs/remotes/upstream-svn/trunk/.rev_map.33fb83da-1015-0410-9b9b-96027f9a4af8
and if I omitted trunk/ from url -- the same story of needed authentication
Signature · 5 lines
Yaroslav O. Halchenko Postdoctoral Fellow, Department of Psychological and Brain Sciences Dartmouth College, 419 Moore Hall, Hinman Box 6207, Hanover, NH 03755 Phone: +1 (603) 646-9834 Fax: +1 (603) 646-1419 WWW: http://www.linkedin.com/in/yarik
Yaroslav Halchenko venit, vidit, dixit 18.11.2009 14:32:
Quoted 13 lines · Michael J Gruber
Quoted 6 lines
Quoted 2 lines
git svn clone --prefix=upstream-svn/ -T trunk -t releases http://domain.com/svnrepo svnrepo.gitsvn
Your problem description seems to match perfectly with the description of the "--no-minimize-url" option in git svn's man page. I'm sure it's worth a try.
;-) oh I did I did ;)
I've usedgit svn clone --no-minimize-url --prefix=upstream-svn/ -T trunk -t releases http://domain.com/svnrepo/trunk svnrepo.gitsvn
Is the trunk really at svnrepo/trunk/trunk?
Quoted 8 lines
that initialized repository, went through a lengthy list of
trace: built-in: git 'config' 'svn-remote.svn.tags-maxRev' '...'
with last command reported
trace: built-in: git 'gc' '--auto'
Quoted 7 lines
and resulted in nothing being cloned/checked out or even a single ref. The only file under .git besides the ones created by git init
./svn/refs/remotes/upstream-svn/trunk/.rev_map.33fb83da-1015-0410-9b9b-96027f9a4af8
and if I omitted trunk/ from url -- the same story of needed authentication
I would try both
git svn clone --no-minimize-url --prefix=upstream-svn/ -T trunk -t releases http://domain.com/svnrepo/ svnrepo.gitsvn
and also the seemingly equivalent
git svn clone --no-minimize-url --prefix=upstream-svn/ -T
http://domain.com/svnrepo/trunk -t http://domain.com/svnrepo/releases
svnrepo.gitsvn
Also, I assume you can svn list http://domain.com/svnrepo/trunk and
http://domain.com/svnrepo/releases ;)
Michael
Quoted 2 lines · Michael J Gruber
Quoted 1 line
git svn clone --no-minimize-url --prefix=upstream-svn/ -T trunk -t releases http://domain.com/svnrepo/trunk svnrepo.gitsvn
Is the trunk really at svnrepo/trunk/trunk?
nope... it is just svnrepo/trunk but if I set url to point to parent -- git svn seeks authentication right away
Quoted 3 lines
I would try both
git svn clone --no-minimize-url --prefix=upstream-svn/ -T trunk -t releases http://domain.com/svnrepo/ svnrepo.gitsvn
asks for authentication since there is no public access to
http://domain.com/svnrepo/
Quoted 5 lines
and also the seemingly equivalent
git svn clone --no-minimize-url --prefix=upstream-svn/ -T
http://domain.com/svnrepo/trunk -t http://domain.com/svnrepo/releases
svnrepo.gitsvn
seems to not work since it wants url as a parameter
Bad URL passed to RA layer: Illegal repository URL svnrepo.gitsvn at /usr/lib/git-core/git-svn line 940
Quoted 2 lines
Also, I assume you can svn list http://domain.com/svnrepo/trunk and
http://domain.com/svnrepo/releases ;)
yeap -- I can list both of those but not their parent.
Signature · 5 lines
Yaroslav O. Halchenko Postdoctoral Fellow, Department of Psychological and Brain Sciences Dartmouth College, 419 Moore Hall, Hinman Box 6207, Hanover, NH 03755 Phone: +1 (603) 646-9834 Fax: +1 (603) 646-1419 WWW: http://www.linkedin.com/in/yarik
Yaroslav Halchenko venit, vidit, dixit 18.11.2009 15:23:
Quoted 19 lines · Michael J Gruber
Quoted 2 lines
Quoted 1 line
git svn clone --no-minimize-url --prefix=upstream-svn/ -T trunk -t releases http://domain.com/svnrepo/trunk svnrepo.gitsvn
Is the trunk really at svnrepo/trunk/trunk?
nope... it is just svnrepo/trunk but if I set url to point to parent -- git svn seeks authentication right away
Quoted 3 lines
I would try both
git svn clone --no-minimize-url --prefix=upstream-svn/ -T trunk -t releases http://domain.com/svnrepo/ svnrepo.gitsvnasks for authentication since there is no public access to
http://domain.com/svnrepo/Quoted 5 lines
and also the seemingly equivalent
git svn clone --no-minimize-url --prefix=upstream-svn/ -T
http://domain.com/svnrepo/trunk -t http://domain.com/svnrepo/releases
svnrepo.gitsvn
Quoted 9 lines
seems to not work since it wants url as a parameter
Bad URL passed to RA layer: Illegal repository URL svnrepo.gitsvn at
/usr/lib/git-core/git-svnline 940Quoted 2 lines
Also, I assume you can svn list http://domain.com/svnrepo/trunk and
http://domain.com/svnrepo/releases ;)yeap -- I can list both of those but not their parent.
OK, so the way it's implemented --no-minimize-url might be half as useful as it could be. One last try (before asking Eric...) would be
git svn clone --no-minimize-url --prefix=upstream-svn/ -T
http://domain.com/svnrepo/trunk -t http://domain.com/svnrepo/releases
http://domain.com/svnrepo/trunk svnrepo.gitsvn
because that involves accessible URLs only and trunk and branch URLs are absolute.
[Meanwhile I git the actual URL PMed by Yaroslov.]
So, what happens with the above is that git-svn tries to set the URL config again from the URL part of an absolute tags argument. I don't know how absolute URLs (which are documented) for tags etc. could possibly work if git-svn tries to do that. Eric?
I tried also with two svn sections to circumvent this:
[svn-remote "svn"]
url = http://domain.com:/project/trunk
fetch = :refs/remotes/trunk
[svn-remote "svnr"]
url = http://domain.com:/project/releases
tags = /*:refs/remotes/tags/*
Fetching -Rsvn works fine, but fetching -Rsvnr gives the same authentication problems. And fetch does not accept --no-minimize-url as an option. OTOH: If the option is not used it seems to me (from the source) that not minimizing is the default, which leaves me really stomped. Eric?? ;)
Michael
Quoted 23 lines · Michael J Gruber
Yaroslav Halchenko venit, vidit, dixit 18.11.2009 15:23:
Quoted 22 lines · Michael J Gruber
Quoted 2 lines
Quoted 1 line
git svn clone --no-minimize-url --prefix=upstream-svn/ -T trunk -t releases http://domain.com/svnrepo/trunk svnrepo.gitsvn
Is the trunk really at svnrepo/trunk/trunk?
nope... it is just svnrepo/trunk but if I set url to point to parent -- git svn seeks authentication right away
Quoted 3 lines
I would try both
git svn clone --no-minimize-url --prefix=upstream-svn/ -T trunk -t releases http://domain.com/svnrepo/ svnrepo.gitsvnasks for authentication since there is no public access to
http://domain.com/svnrepo/Quoted 5 lines
and also the seemingly equivalent
git svn clone --no-minimize-url --prefix=upstream-svn/ -T
http://domain.com/svnrepo/trunk -t http://domain.com/svnrepo/releases
svnrepo.gitsvnseems to not work since it wants url as a parameter
Bad URL passed to RA layer: Illegal repository URL svnrepo.gitsvn at
/usr/lib/git-core/git-svnline 940
Hi Michael, Yaroslav,
I think that second command syntax only works for "git svn init" right now, not sure if it ever worked with "clone".
Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
Also, I assume you can svn list http://domain.com/svnrepo/trunk and
http://domain.com/svnrepo/releases ;)yeap -- I can list both of those but not their parent.
OK, so the way it's implemented --no-minimize-url might be half as useful as it could be. One last try (before asking Eric...) would be
Quoted 8 lines
git svn clone --no-minimize-url --prefix=upstream-svn/ -T
http://domain.com/svnrepo/trunk -t http://domain.com/svnrepo/releases
http://domain.com/svnrepo/trunk svnrepo.gitsvnbecause that involves accessible URLs only and trunk and branch URLs are absolute.
[Meanwhile I git the actual URL PMed by Yaroslov.]
Any chance I could get that URL? (I probably won't get a chance to spend time debugging this until Friday). Might be worth it to get an strace or tcpdump to see what exactly is going on. Or at least some print statements around Git::SVN::Ra::new()...
Quoted 4 lines
So, what happens with the above is that git-svn tries to set the URL config again from the URL part of an absolute tags argument. I don't know how absolute URLs (which are documented) for tags etc. could possibly work if git-svn tries to do that. Eric?
It looks like support for specifying absolute URLs with "clone" has been broken for a while. Guess I'll need test cases...
Quoted 9 lines
I tried also with two svn sections to circumvent this:
[svn-remote "svn"]
url = http://domain.com:/project/trunk
fetch = :refs/remotes/trunk
[svn-remote "svnr"]
url = http://domain.com:/project/releases
tags = /*:refs/remotes/tags/*
Quoted 5 lines
Fetching -Rsvn works fine, but fetching -Rsvnr gives the same authentication problems. And fetch does not accept --no-minimize-url as an option. OTOH: If the option is not used it seems to me (from the source) that not minimizing is the default, which leaves me really stomped. Eric?? ;)
Odd that the svnr one doesn't work. Does changing:
tags = /*:refs/remotes/tags/*
to:
tags = *:refs/remotes/tags/*
help at all?
Minimizing should be the default in 1.6.5. I'm a bit stumped, too :x I'd like to see what network traffic git svn is sending for the "svnr" case vs "svn ls http://domain.com/project/releases"
Signature · 1 line
Eric Wong
Quoted 9 lines · Eric Wong
Quoted 8 lines · Michael J Gruber
I tried also with two svn sections to circumvent this:
[svn-remote "svn"]
url = http://domain.com:/project/trunk
fetch = :refs/remotes/trunk
[svn-remote "svnr"]
url = http://domain.com:/project/releases
tags = /*:refs/remotes/tags/*
Hi Yaroslav,
Weird, I'm a bit confused by this myself but I'm out of time at the moment, but swapping '[svn-remote "svn"]' and "[svn-remote "svnr"]" seems to work, so there's apparently a bug in our handling of svn-remote != "svn" somewhere...
So the following config should work:
[svn-remote "svnt"]
url = http://domain.com:/project/trunk
fetch = :refs/remotes/trunk
[svn-remote "svn"]
url = http://domain.com:/project/releases
tags = /*:refs/remotes/tags/*
You should probably run "git svn fetch -R svnt" before running "git svn fetch" to pick up the tagged releases.
Signature · 1 line
Eric Wong
PATCH 1/1 git svn: always reuse existing remotes on fetch
Quoted 4 lines · Eric Wong
so there's apparently a bug in our handling of
svn-remote != "svn" somewhere...From
4d0157d6995925ea55ff181ea94d058583333f90Mon Sep 17 00:00:00 2001
From: Eric Wong <[email protected]>
Date: Sun, 22 Nov 2009 12:37:06 -0800
Subject: [PATCH] git svn: always reuse existing remotes on fetch
The internal no_reuse_existing flag is set to allow initializing multiple remotes with the same URL, common with SVM users.
Unfortunately, this flag caused misbehavior when used with the -R command-line flag for fetching.
--- git-svn.perl | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
git-svn.perl +2 -0
@@ -428,6 +428,7 @@ sub cmd_fetch { if (@_ > 1) { die "Usage: $0 fetch [--all] [--parent] [svn-remote]\n"; } + $Git::SVN::no_reuse_existing = undef; if ($_fetch_parent) { my ($url, $rev, $uuid, $gs) = working_head_info('HEAD'); unless ($gs) {
@@ -956,6 +957,7 @@ sub cmd_multi_init { } sub cmd_multi_fetch { + $Git::SVN::no_reuse_existing = undef; my $remotes = Git::SVN::read_all_remotes(); foreach my $repo_id (sort keys %$remotes) { if ($remotes->{$repo_id}->{url}) {
Signature · 1 line
Eric Wong