jffs2: Fix memory corruption in jffs2_read_inode_range()
PATCH 1/1 jffs2: Fix memory corruption in jffs2_read_inode_range()
In 2.6.23 kernel, commit a32ea1e1f925399e0d81ca3f7394a44a6dafa12c ("Fix read/truncate race") fixed a race in the generic code, and as a side effect, now do_generic_file_read() can ask us to readpage() past the i_size, which seems to be correctly handled by the block routines (e.g. block_read_full_page() fills the page with zeroes in case if somebody is trying to read past the last inode's block).
JFFS2 doesn't handle this, instead jffs2_read_inode_range() is trying to lookup the fragments which do not belong to anything, and jffs2_lookup_node_frag() happily returns "the closest smaller match" which is OK for most cases (I guess), but in our case there wasn't anything meaningful to lookup in the first place.
After we found the bogus fragment, the code can branch to 'Filling frag hole' case that does
memset(buf, 0, min(end, frag->ofs + frag->size) - offset);
and since 'frag' is bogus, its ofs + size can be smaller than the real 'offset' (i.e. index << PAGE_CACHE_SHIFT), and so the code turns into
memset(buf, 0, <huge unsigned negative>);
Hopefully, in most cases the corruption is fatal, and quickly causing random oopses, like this:
[email protected]:~/ltp-fs-20090531# ./testcases/kernel/fs/ftest/ftest01 Unable to handle kernel paging request for data at address 0x00000008 Faulting instruction address: 0xc01cd980 Oops: Kernel access of bad area, sig: 11 [#1] [...] NIP [c01cd980] rb_insert_color+0x38/0x184 LR [c0043978] enqueue_hrtimer+0x88/0xc4 Call Trace: [c6c63b60] [c004f9a8] tick_sched_timer+0xa0/0xe4 (unreliable) [c6c63b80] [c0043978] enqueue_hrtimer+0x88/0xc4 [c6c63b90] [c0043a48] __run_hrtimer+0x94/0xbc [c6c63bb0] [c0044628] hrtimer_interrupt+0x140/0x2b8 [c6c63c10] [c000f8e8] timer_interrupt+0x13c/0x254 [c6c63c30] [c001352c] ret_from_except+0x0/0x14 --- Exception: 901 at memset+0x38/0x5c LR = jffs2_read_inode_range+0x144/0x17c [c6c63cf0] [00000000] (null) (unreliable)
This patch fixes the issue, plus fixes all LTP tests on NAND/UBI with JFFS2 filesystem that were failing since 2.6.23 (seems like the bug above also broke the truncation).
Note that the bug is only reproducible with write-buffered MTD devices (e.g. NAND, UBI), which is a mystery to me (though I didn't look close enough, possibly there is a race between gc and wbuf code, but I don't see it and obviously it isn't that fatal).
--- fs/jffs2/file.c | 8 +++++++- 1 files changed, 7 insertions(+), 1 deletions(-)
fs/jffs2/file.c +7 -1
@@ -85,7 +85,13 @@ static int jffs2_do_readpage_nolock (struct inode *inode, struct page *pg) pg_buf =kmap (pg);/* FIXME: Can kmap fail? */ - ret =jffs2_read_inode_range (c, f, pg_buf, pg->index <<PAGE_CACHE_SHIFT ,PAGE_CACHE_SIZE ); +if (pg->index > ((i_size_read (inode) -1 ) >>PAGE_CACHE_SHIFT )) { + ret =0 ; +memset (pg_buf,0 ,PAGE_CACHE_SIZE ); + }else { + ret =jffs2_read_inode_range (c, f, pg_buf, + pg->index <<PAGE_CACHE_SHIFT ,PAGE_CACHE_SIZE ); + }if (ret) {ClearPageUptodate (pg);
Signature · 1 line
1.6.3.3
David Woodhouse
maintainerReview
Quoted 7 lines · Anton Vorontsov
(quoted diff) +7
-0+ if (pg->index > ((i_size_read(inode) - 1) >> PAGE_CACHE_SHIFT)) { + ret = 0; + memset(pg_buf, 0, PAGE_CACHE_SIZE); + } else { + ret = jffs2_read_inode_range(c, f, pg_buf, + pg->index << PAGE_CACHE_SHIFT, PAGE_CACHE_SIZE); + }
Thank you for the excellent diagnosis and the patch.
I think I'd prefer to fix it a little differently though -- I would be happier to make jffs2_read_inode_range() cope with out-of-file reads, rather than adding this special case where we don't call it.
That way we aren't at all susceptible to potential races between the VFS-maintained i_size and our own internal fragtree handling. And jffs2_read_inode_range() already handles the memset to zero for various other reasons anyway.
Does this patch look OK to you? It seems to work on the test cases I've tried.
fs/jffs2/read.c +5 -3
@@ -164,12 +164,14 @@ int jffs2_read_inode_range(struct jffs2_sb_info *c, struct jffs2_inode_info *f,/* XXX FIXME: Where a single physical node actually shows up in two frags, we read it twice. Don't do that. */ -/* Now we're pointing at the first frag which overlaps our page */ +/* Now we're pointing at the first frag which overlaps our page +* (or perhaps is before it, if we've been asked to read off the +* end of the file). */ while (offset < end) {D2 (printk (KERN_DEBUG "jffs2_read_inode_range: offset %d, end %d\n" , offset, end)); -if (unlikely (!frag || frag->ofs > offset)) { +if (unlikely (!frag || frag->ofs > offset || frag->ofs + frag->size <= offset)) {uint32_t holesize = end - offset; -if (frag) { +if (frag && frag->ofs > offset) {D1 (printk (KERN_NOTICE "Eep. Hole in ino #%u fraglist. frag->ofs = 0x%08x, offset = 0x%08x\n" , f->inocache->ino, frag->ofs, offset)); holesize =min (holesize, frag->ofs - offset); }
Signature · 2 lines
David Woodhouse Open Source Technology Centre [email protected] Intel Corporation
Quoted 15 lines · David Woodhouse
Review
Quoted 7 lines · Anton Vorontsov
(quoted diff) +7
-0+ if (pg->index > ((i_size_read(inode) - 1) >> PAGE_CACHE_SHIFT)) { + ret = 0; + memset(pg_buf, 0, PAGE_CACHE_SIZE); + } else { + ret = jffs2_read_inode_range(c, f, pg_buf, + pg->index << PAGE_CACHE_SHIFT, PAGE_CACHE_SIZE); + }Thank you for the excellent diagnosis and the patch.
I think I'd prefer to fix it a little differently though -- I would be happier to make
jffs2_read_inode_range()cope with out-of-file reads, rather than adding this special case where we don't call it.
Quoted 7 lines
That way we aren't at all susceptible to potential races between the VFS-maintained
i_sizeand our own internal fragtree handling. Andjffs2_read_inode_range()already handles the memset to zero for various other reasons anyway.Does this patch look OK to you? It seems to work on the test cases I've tried.
Yep, it looks good (and works).
Thanks David!
Signature · 3 lines
Anton Vorontsov email: [email protected] irc://irc.freenode.net/bd2
David Woodhouse
maintainerPATCH 1/1 jffs2: Fix memory corruption in jffs2_read_inode_range()
In reply to Anton VorontsovIn 2.6.23 kernel, commit a32ea1e1f925399e0d81ca3f7394a44a6dafa12c ("Fix read/truncate race") fixed a race in the generic code, and as a side effect, now do_generic_file_read() can ask us to readpage() past the i_size. This seems to be correctly handled by the block routines (e.g. block_read_full_page() fills the page with zeroes in case if somebody is trying to read past the last inode's block).
JFFS2 doesn't handle this; it assumes that it won't be asked to read pages which don't exist -- and thus that there will be at least _one_ valid 'frag' on the page it's being asked to read. It will fill any holes with the following memset:
memset(buf, 0, min(end, frag->ofs + frag->size) - offset);
When the 'closest smaller match' returned by jffs2_lookup_node_frag() is actually on a previous page and ends before 'offset', that results in:
memset(buf, 0, <huge unsigned negative>);
Hopefully, in most cases the corruption is fatal, and quickly causing random oopses, like this:
[email protected]:~/ltp-fs-20090531# ./testcases/kernel/fs/ftest/ftest01 Unable to handle kernel paging request for data at address 0x00000008 Faulting instruction address: 0xc01cd980 Oops: Kernel access of bad area, sig: 11 [#1] [...] NIP [c01cd980] rb_insert_color+0x38/0x184 LR [c0043978] enqueue_hrtimer+0x88/0xc4 Call Trace: [c6c63b60] [c004f9a8] tick_sched_timer+0xa0/0xe4 (unreliable) [c6c63b80] [c0043978] enqueue_hrtimer+0x88/0xc4 [c6c63b90] [c0043a48] __run_hrtimer+0x94/0xbc [c6c63bb0] [c0044628] hrtimer_interrupt+0x140/0x2b8 [c6c63c10] [c000f8e8] timer_interrupt+0x13c/0x254 [c6c63c30] [c001352c] ret_from_except+0x0/0x14 --- Exception: 901 at memset+0x38/0x5c LR = jffs2_read_inode_range+0x144/0x17c [c6c63cf0] [00000000] (null) (unreliable)
This patch fixes the issue, plus fixes all LTP tests on NAND/UBI with JFFS2 filesystem that were failing since 2.6.23 (seems like the bug above also broke the truncation).
fs/jffs2/read.c +6 -3
@@ -164,12 +164,15 @@ int jffs2_read_inode_range(struct jffs2_sb_info *c, struct jffs2_inode_info *f,/* XXX FIXME: Where a single physical node actually shows up in two frags, we read it twice. Don't do that. */ -/* Now we're pointing at the first frag which overlaps our page */ +/* Now we're pointing at the first frag which overlaps our page +* (or perhaps is before it, if we've been asked to read off the +* end of the file). */ while (offset < end) {D2 (printk (KERN_DEBUG "jffs2_read_inode_range: offset %d, end %d\n" , offset, end)); -if (unlikely (!frag || frag->ofs > offset)) { +if (unlikely (!frag || frag->ofs > offset || + frag->ofs + frag->size <= offset)) {uint32_t holesize = end - offset; -if (frag) { +if (frag && frag->ofs > offset) {D1 (printk (KERN_NOTICE "Eep. Hole in ino #%u fraglist. frag->ofs = 0x%08x, offset = 0x%08x\n" , f->inocache->ino, frag->ofs, offset)); holesize =min (holesize, frag->ofs - offset); }
Signature · 2 lines
David Woodhouse Open Source Technology Centre [email protected] Intel Corporation