Skip to contentSkip to conversation

e1000e: check WoL mode is among set of supported modes

PATCH New Jeff Kirsher 1 participant 23 messages Nov 21, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/23 e1000e: check WoL mode is among set of supported modes

From: Bruce Allan <[email protected]>

When setting WoL feature, check the supplied modes are all supported rather than checking for no support. This way, if any new modes are added the driver does not default to not complaining about it if we don't really support it.

---

 drivers/net/e1000e/ethtool.c |    9 ++++-----
 1 files changed, 4 insertions(+), 5 deletions(-)
drivers/net/e1000e/ethtool.c +4 -5
index c430dc8..3af5ee4 100644
@@ -1777,12 +1777,11 @@ static int e1000_set_wol(struct net_device *netdev,
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 
-	if (wol->wolopts & WAKE_MAGICSECURE)
-		return -EOPNOTSUPP;
-
 	if (!(adapter->flags & FLAG_HAS_WOL) ||
-	    !device_can_wakeup(&adapter->pdev->dev))
-		return wol->wolopts ? -EOPNOTSUPP : 0;
+	    !device_can_wakeup(&adapter->pdev->dev) ||
+	    (wol->wolopts & ~(WAKE_UCAST | WAKE_MCAST | WAKE_BCAST |
+	                      WAKE_MAGIC | WAKE_PHY | WAKE_ARP)))
+		return -EOPNOTSUPP;
 
 	/* these settings will always override what we currently have */
 	adapter->wol = 0;
#1 lore raw

PATCH 2/23 e1000e: add missing tests for 82583 in ethtool functions

From: Bruce Allan <[email protected]>

Add tests for 82583 in a couple ethtool functions that were missed from the initial hardware enablement submission.

---

 drivers/net/e1000e/ethtool.c |    5 ++++-
 1 files changed, 4 insertions(+), 1 deletions(-)
drivers/net/e1000e/ethtool.c +4 -1
index 3af5ee4..1ff43b4 100644
@@ -604,7 +604,9 @@ static int e1000_set_eeprom(struct net_device *netdev,
 	 * and flush shadow RAM for applicable controllers
 	 */
 	if ((first_word <= NVM_CHECKSUM_REG) ||
-	    (hw->mac.type == e1000_82574) || (hw->mac.type == e1000_82573))
+	    (hw->mac.type == e1000_82583) ||
+	    (hw->mac.type == e1000_82574) ||
+	    (hw->mac.type == e1000_82573))
 		ret_val = e1000e_update_nvm_checksum(hw);
 
 out:
@@ -1839,6 +1841,7 @@ static int e1000_phys_id(struct net_device *netdev, u32 data)
 
 	if ((hw->phy.type == e1000_phy_ife) ||
 	    (hw->mac.type == e1000_pchlan) ||
+	    (hw->mac.type == e1000_82583) ||
 	    (hw->mac.type == e1000_82574)) {
 		INIT_WORK(&adapter->led_blink_task, e1000e_led_blink_task);
 		if (!adapter->blink_timer.function) {
#2 lore raw

PATCH 3/23 e1000e: clearing interrupt timers causes descriptors to get flushed

In reply to Jeff Kirsher

From: Bruce Allan <[email protected]>

Clearing the interrupt timers following an IMS clear has the unwanted side-effect of flushing all descriptors immediately following a partial write when interrupts are disabled.

---

 drivers/net/e1000e/netdev.c |    2 --
 1 files changed, 0 insertions(+), 2 deletions(-)
drivers/net/e1000e/netdev.c +0 -2
index 3caa1d5..3845fb6 100644
@@ -2441,8 +2441,6 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
 		ew32(ITR, 1000000000 / (adapter->itr * 256));
 
 	ctrl_ext = er32(CTRL_EXT);
-	/* Reset delay timers after every interrupt */
-	ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR;
 	/* Auto-Mask interrupts upon ICR access */
 	ctrl_ext |= E1000_CTRL_EXT_IAME;
 	ew32(IAM, 0xffffffff);
#3 lore raw

PATCH 4/23 e1000e: function pointers for ethtool set/get offloads

In reply to Jeff Kirsher

From: Bruce Allan <[email protected]>

Provide missing function pointers for ethtool set/get offloads.

---

 drivers/net/e1000e/ethtool.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)
drivers/net/e1000e/ethtool.c +2 -0
index 1ff43b4..3d73f20 100644
@@ -1996,6 +1996,8 @@ static const struct ethtool_ops e1000_ethtool_ops = {
 	.get_sset_count		= e1000e_get_sset_count,
 	.get_coalesce		= e1000_get_coalesce,
 	.set_coalesce		= e1000_set_coalesce,
+	.get_flags		= ethtool_op_get_flags,
+	.set_flags		= ethtool_op_set_flags,
 };
 
 void e1000e_set_ethtool_ops(struct net_device *netdev)
#4 lore raw

PATCH 5/23 e1000e: don't clean Rx ring while resetting

In reply to Jeff Kirsher

From: Bruce Allan <[email protected]>

When using legacy interrupts, do not clean the Rx ring while resetting otherwise traffic will not pass.

---

 drivers/net/e1000e/netdev.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/net/e1000e/netdev.c +1 -1
index 3845fb6..e819f19 100644
@@ -1176,7 +1176,7 @@ static irqreturn_t e1000_intr(int irq, void *data)
 	struct e1000_hw *hw = &adapter->hw;
 	u32 rctl, icr = er32(ICR);
 
-	if (!icr)
+	if (!icr || test_bit(__E1000_DOWN, &adapter->state))
 		return IRQ_NONE;  /* Not our interrupt */
 
 	/*
#5 lore raw

PATCH 6/23 e1000e: link reporting problems

In reply to Jeff Kirsher

From: Bruce Allan <[email protected]>

Copper links with WoL or management enabled (any condition which prevents the phy from being powered down when the interface is taken down) were always reporting link-up when the interface had been taken down. This is because when the interface is taken down (ifconfig ethx down), interrupts are disabled. With no interrupts, there is no LSC interrupt, which is normally required to set "get_link_status", which instructs the driver to query the device for link state. The fix is to force get_link_status to true if the interface is not up.

---

 drivers/net/e1000e/ethtool.c |   11 +++++++++++
 1 files changed, 11 insertions(+), 0 deletions(-)
drivers/net/e1000e/ethtool.c +11 -0
index 3d73f20..67e06fd 100644
@@ -190,6 +190,17 @@ static int e1000_get_settings(struct net_device *netdev,
 static u32 e1000_get_link(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_mac_info *mac = &adapter->hw.mac;
+
+	/*
+	 * If the link is not reported up to netdev, interrupts are disabled,
+	 * and so the physical link state may have changed since we last
+	 * looked. Set get_link_status to make sure that the true link
+	 * state is interrogated, rather than pulling a cached and possibly
+	 * stale link state from the driver.
+	 */
+	if (!netif_carrier_ok(netdev))
+		mac->get_link_status = 1;
 
 	return e1000_has_link(adapter);
 }
#6 lore raw

PATCH 7/23 e1000e: improper return code signage

In reply to Jeff Kirsher

From: Bruce Allan <[email protected]>

The e1000_get_cable_length_82577() should return a negative value upon error.

---

 drivers/net/e1000e/phy.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/net/e1000e/phy.c +1 -1
index 03175b3..95a8196 100644
@@ -3137,7 +3137,7 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw)
 	         I82577_DSTATUS_CABLE_LENGTH_SHIFT;
 
 	if (length == E1000_CABLE_LENGTH_UNDEFINED)
-		ret_val = E1000_ERR_PHY;
+		ret_val = -E1000_ERR_PHY;
 
 	phy->cable_length = length;
 
#7 lore raw

PATCH 8/23 e1000e: disable K1 on PCH LOM when in PHY loopback mode

In reply to Jeff Kirsher

From: Bruce Allan <[email protected]>

When performing the ethtool PHY loopback test on PCH-based LOMs (82577 and 82578), disable K1 (a MAC-PHY interconnect low power mode) otherwise packets might get corrupted.

---

 drivers/net/e1000e/e1000.h   |    1 +
 drivers/net/e1000e/ethtool.c |    4 ++++
 drivers/net/e1000e/ich8lan.c |    3 +--
 3 files changed, 6 insertions(+), 2 deletions(-)
drivers/net/e1000e/e1000.h +1 -0
index 00989c5..a6c6803 100644
@@ -485,6 +485,7 @@ extern void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
 extern void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);
 extern void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw);
 extern void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw);
+extern s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);
 
 extern s32 e1000e_check_for_copper_link(struct e1000_hw *hw);
 extern s32 e1000e_check_for_fiber_link(struct e1000_hw *hw);
drivers/net/e1000e/ethtool.c +4 -0
index 67e06fd..fd79214 100644
@@ -1260,6 +1260,10 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
 
 	hw->mac.autoneg = 0;
 
+	/* Workaround: K1 must be disabled for stable 1Gbps operation */
+	if (hw->mac.type == e1000_pchlan)
+		e1000_configure_k1_ich8lan(hw, false);
+
 	if (hw->phy.type == e1000_phy_m88) {
 		/* Auto-MDI/MDIX Off */
 		e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
drivers/net/e1000e/ich8lan.c +1 -2
index 51ddb04..bd9002e 100644
@@ -224,7 +224,6 @@ static s32 e1000_led_off_pchlan(struct e1000_hw *hw);
 static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active);
 static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw);
 static s32  e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link);
-static s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);
 
 static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
 {
@@ -1023,7 +1022,7 @@ out:
  *
  *  Success returns 0, Failure returns -E1000_ERR_PHY (-2)
  **/
-static s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
+s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
 {
 	s32 ret_val = 0;
 	u32 ctrl_reg = 0;
#8 lore raw

PATCH 9/23 e1000e: Incorrect MII Link beat reporting.

In reply to Jeff Kirsher

From: Bruce Allan <[email protected]>

The driver was only updating MII stats when an LSC up was detected and the interface had not already been reported up to netdev. This meant MII stats returned in response to an SIOCGMIIREG ioctl would always show a link up if it had ever been up. This was misleading the networking daemon guessnet, which uses this ioctl, into making improper network port selections.
This fix adds a call to e1000_phy_read_status() to actively read the mii stats before responding to the SIOCGMIIREG ioctl.

---

 drivers/net/e1000e/netdev.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)
drivers/net/e1000e/netdev.c +2 -0
index e819f19..ff9f9f1 100644
@@ -4320,6 +4320,8 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
 		data->phy_id = adapter->hw.phy.addr;
 		break;
 	case SIOCGMIIREG:
+		e1000_phy_read_status(adapter);
+
 		switch (data->reg_num & 0x1F) {
 		case MII_BMCR:
 			data->val_out = adapter->phy_regs.bmcr;
#9 lore raw

PATCH 10/23 e1000e: cleanup redundant #include's

In reply to Jeff Kirsher

From: Bruce Allan <[email protected]>

---

 drivers/net/e1000e/82571.c   |    4 ----
 drivers/net/e1000e/e1000.h   |    1 +
 drivers/net/e1000e/es2lan.c  |    5 -----
 drivers/net/e1000e/ich8lan.c |    5 -----
 drivers/net/e1000e/lib.c     |    5 -----
 5 files changed, 1 insertions(+), 19 deletions(-)
drivers/net/e1000e/82571.c +0 -4
index d1e0563..407637f 100644
@@ -43,10 +43,6 @@
  * 82583V Gigabit Network Connection
  */
 
-#include <linux/netdevice.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-
 #include "e1000.h"
 
 #define ID_LED_RESERVED_F746 0xF746
drivers/net/e1000e/e1000.h +1 -0
index a6c6803..ac5d855 100644
@@ -36,6 +36,7 @@
 #include <linux/workqueue.h>
 #include <linux/io.h>
 #include <linux/netdevice.h>
+#include <linux/pci.h>
 
 #include "hw.h"
 
drivers/net/e1000e/es2lan.c +0 -5
index ae5d736..6fd46f5 100644
@@ -31,11 +31,6 @@
  * 80003ES2LAN Gigabit Ethernet Controller (Serdes)
  */
 
-#include <linux/netdevice.h>
-#include <linux/ethtool.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-
 #include "e1000.h"
 
 #define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL	 0x00
drivers/net/e1000e/ich8lan.c +0 -5
index bd9002e..bef5e33 100644
@@ -54,11 +54,6 @@
  * 82578DC Gigabit Network Connection
  */
 
-#include <linux/netdevice.h>
-#include <linux/ethtool.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-
 #include "e1000.h"
 
 #define ICH_FLASH_GFPREG		0x0000
drivers/net/e1000e/lib.c +0 -5
index 99ba2b8..5a670a2 100644
@@ -26,11 +26,6 @@
 
 *******************************************************************************/
 
-#include <linux/netdevice.h>
-#include <linux/ethtool.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-
 #include "e1000.h"
 
 enum e1000_mng_mode {
#10 lore raw

PATCH 11/23 e1000e: consolidate two dbug macros into one simpler one

In reply to Jeff Kirsher

From: Bruce Allan <[email protected]>

This patch depends on a previous one that cleans up redundant #includes.

---

 drivers/net/e1000e/82571.c   |   40 +++++++-------
 drivers/net/e1000e/e1000.h   |    4 +
 drivers/net/e1000e/es2lan.c  |   23 ++++----
 drivers/net/e1000e/hw.h      |   11 ----
 drivers/net/e1000e/ich8lan.c |   69 ++++++++++++------------
 drivers/net/e1000e/lib.c     |  122 +++++++++++++++++++++---------------------
 drivers/net/e1000e/netdev.c  |   28 +++-------
 drivers/net/e1000e/phy.c     |   92 ++++++++++++++++----------------
 8 files changed, 183 insertions(+), 206 deletions(-)
drivers/net/e1000e/82571.c +20 -20
index 407637f..680b7c7 100644
@@ -309,7 +309,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
 			 * indicates that the bootagent or EFI code has
 			 * improperly left this bit enabled
 			 */
-			hw_dbg(hw, "Please update your 82571 Bootagent\n");
+			e_dbg("Please update your 82571 Bootagent\n");
 		}
 		ew32(SWSM, swsm & ~E1000_SWSM_SMBI);
 	}
@@ -483,7 +483,7 @@ static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)
 	}
 
 	if (i == sw_timeout) {
-		hw_dbg(hw, "Driver can't access device - SMBI bit is set.\n");
+		e_dbg("Driver can't access device - SMBI bit is set.\n");
 		hw->dev_spec.e82571.smb_counter++;
 	}
 	/* Get the FW semaphore. */
@@ -501,7 +501,7 @@ static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)
 	if (i == fw_timeout) {
 		/* Release semaphores */
 		e1000_put_hw_semaphore_82571(hw);
-		hw_dbg(hw, "Driver can't access the NVM\n");
+		e_dbg("Driver can't access the NVM\n");
 		return -E1000_ERR_NVM;
 	}
 
@@ -708,7 +708,7 @@ static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
 	 */
 	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
 	    (words == 0)) {
-		hw_dbg(hw, "nvm parameter(s) out of bounds\n");
+		e_dbg("nvm parameter(s) out of bounds\n");
 		return -E1000_ERR_NVM;
 	}
 
@@ -749,7 +749,7 @@ static s32 e1000_get_cfg_done_82571(struct e1000_hw *hw)
 		timeout--;
 	}
 	if (!timeout) {
-		hw_dbg(hw, "MNG configuration cycle has not completed.\n");
+		e_dbg("MNG configuration cycle has not completed.\n");
 		return -E1000_ERR_RESET;
 	}
 
@@ -848,9 +848,9 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
 	 */
 	ret_val = e1000e_disable_pcie_master(hw);
 	if (ret_val)
-		hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
+		e_dbg("PCI-E Master disable polling has failed.\n");
 
-	hw_dbg(hw, "Masking off all interrupts\n");
+	e_dbg("Masking off all interrupts\n");
 	ew32(IMC, 0xffffffff);
 
 	ew32(RCTL, 0);
@@ -889,7 +889,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
 
 	ctrl = er32(CTRL);
 
-	hw_dbg(hw, "Issuing a global reset to MAC\n");
+	e_dbg("Issuing a global reset to MAC\n");
 	ew32(CTRL, ctrl | E1000_CTRL_RST);
 
 	if (hw->nvm.type == e1000_nvm_flash_hw) {
@@ -955,12 +955,12 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw)
 	/* Initialize identification LED */
 	ret_val = e1000e_id_led_init(hw);
 	if (ret_val) {
-		hw_dbg(hw, "Error initializing identification LED\n");
+		e_dbg("Error initializing identification LED\n");
 		return ret_val;
 	}
 
 	/* Disabling VLAN filtering */
-	hw_dbg(hw, "Initializing the IEEE VLAN\n");
+	e_dbg("Initializing the IEEE VLAN\n");
 	e1000e_clear_vfta(hw);
 
 	/* Setup the receive address. */
@@ -974,7 +974,7 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw)
 	e1000e_init_rx_addrs(hw, rar_count);
 
 	/* Zero out the Multicast HASH table */
-	hw_dbg(hw, "Zeroing the MTA\n");
+	e_dbg("Zeroing the MTA\n");
 	for (i = 0; i < mac->mta_reg_count; i++)
 		E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
 
@@ -1383,7 +1383,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
 				 */
 				mac->serdes_link_state =
 				    e1000_serdes_link_autoneg_progress;
-				hw_dbg(hw, "AN_UP     -> AN_PROG\n");
+				e_dbg("AN_UP     -> AN_PROG\n");
 			}
 		break;
 
@@ -1401,7 +1401,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
 				    (ctrl & ~E1000_CTRL_SLU));
 				mac->serdes_link_state =
 				    e1000_serdes_link_autoneg_progress;
-				hw_dbg(hw, "FORCED_UP -> AN_PROG\n");
+				e_dbg("FORCED_UP -> AN_PROG\n");
 			}
 			break;
 
@@ -1415,7 +1415,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
 			if (status & E1000_STATUS_LU)  {
 				mac->serdes_link_state =
 				    e1000_serdes_link_autoneg_complete;
-				hw_dbg(hw, "AN_PROG   -> AN_UP\n");
+				e_dbg("AN_PROG   -> AN_UP\n");
 			} else {
 				/*
 				 * Disable autoneg, force link up and
@@ -1430,12 +1430,12 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
 				ret_val =
 				    e1000e_config_fc_after_link_up(hw);
 				if (ret_val) {
-					hw_dbg(hw, "Error config flow control\n");
+					e_dbg("Error config flow control\n");
 					break;
 				}
 				mac->serdes_link_state =
 				    e1000_serdes_link_forced_up;
-				hw_dbg(hw, "AN_PROG   -> FORCED_UP\n");
+				e_dbg("AN_PROG   -> FORCED_UP\n");
 			}
 			mac->serdes_has_link = true;
 			break;
@@ -1450,14 +1450,14 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
 			    (ctrl & ~E1000_CTRL_SLU));
 			mac->serdes_link_state =
 			    e1000_serdes_link_autoneg_progress;
-			hw_dbg(hw, "DOWN      -> AN_PROG\n");
+			e_dbg("DOWN      -> AN_PROG\n");
 			break;
 		}
 	} else {
 		if (!(rxcw & E1000_RXCW_SYNCH)) {
 			mac->serdes_has_link = false;
 			mac->serdes_link_state = e1000_serdes_link_down;
-			hw_dbg(hw, "ANYSTATE  -> DOWN\n");
+			e_dbg("ANYSTATE  -> DOWN\n");
 		} else {
 			/*
 			 * We have sync, and can tolerate one
@@ -1469,7 +1469,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
 			if (rxcw & E1000_RXCW_IV) {
 				mac->serdes_link_state = e1000_serdes_link_down;
 				mac->serdes_has_link = false;
-				hw_dbg(hw, "ANYSTATE  -> DOWN\n");
+				e_dbg("ANYSTATE  -> DOWN\n");
 			}
 		}
 	}
@@ -1491,7 +1491,7 @@ static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data)
 
 	ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
 	if (ret_val) {
-		hw_dbg(hw, "NVM Read Error\n");
+		e_dbg("NVM Read Error\n");
 		return ret_val;
 	}
 
drivers/net/e1000e/e1000.h +2 -2
index ac5d855..dac00a0 100644
@@ -48,9 +48,9 @@ struct e1000_info;
 
 #ifdef DEBUG
 #define e_dbg(format, arg...) \
-	e_printk(KERN_DEBUG , adapter, format, ## arg)
+	e_printk(KERN_DEBUG , hw->adapter, format, ## arg)
 #else
-#define e_dbg(format, arg...) do { (void)(adapter); } while (0)
+#define e_dbg(format, arg...) do { (void)(hw); } while (0)
 #endif
 
 #define e_err(format, arg...) \
drivers/net/e1000e/es2lan.c +11 -12
index 6fd46f5..f5601c5 100644
@@ -394,8 +394,7 @@ static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask)
 	}
 
 	if (i == timeout) {
-		hw_dbg(hw,
-		       "Driver can't access resource, SW_FW_SYNC timeout.\n");
+		e_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n");
 		return -E1000_ERR_SWFW_SYNC;
 	}
 
@@ -597,7 +596,7 @@ static s32 e1000_get_cfg_done_80003es2lan(struct e1000_hw *hw)
 		timeout--;
 	}
 	if (!timeout) {
-		hw_dbg(hw, "MNG configuration cycle has not completed.\n");
+		e_dbg("MNG configuration cycle has not completed.\n");
 		return -E1000_ERR_RESET;
 	}
 
@@ -630,7 +629,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	hw_dbg(hw, "GG82563 PSCR: %X\n", phy_data);
+	e_dbg("GG82563 PSCR: %X\n", phy_data);
 
 	ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
 	if (ret_val)
@@ -648,7 +647,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
 	udelay(1);
 
 	if (hw->phy.autoneg_wait_to_complete) {
-		hw_dbg(hw, "Waiting for forced speed/duplex link "
+		e_dbg("Waiting for forced speed/duplex link "
 			 "on GG82563 phy.\n");
 
 		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
@@ -771,9 +770,9 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
 	 */
 	ret_val = e1000e_disable_pcie_master(hw);
 	if (ret_val)
-		hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
+		e_dbg("PCI-E Master disable polling has failed.\n");
 
-	hw_dbg(hw, "Masking off all interrupts\n");
+	e_dbg("Masking off all interrupts\n");
 	ew32(IMC, 0xffffffff);
 
 	ew32(RCTL, 0);
@@ -785,7 +784,7 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
 	ctrl = er32(CTRL);
 
 	ret_val = e1000_acquire_phy_80003es2lan(hw);
-	hw_dbg(hw, "Issuing a global reset to MAC\n");
+	e_dbg("Issuing a global reset to MAC\n");
 	ew32(CTRL, ctrl | E1000_CTRL_RST);
 	e1000_release_phy_80003es2lan(hw);
 
@@ -820,19 +819,19 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
 	/* Initialize identification LED */
 	ret_val = e1000e_id_led_init(hw);
 	if (ret_val) {
-		hw_dbg(hw, "Error initializing identification LED\n");
+		e_dbg("Error initializing identification LED\n");
 		return ret_val;
 	}
 
 	/* Disabling VLAN filtering */
-	hw_dbg(hw, "Initializing the IEEE VLAN\n");
+	e_dbg("Initializing the IEEE VLAN\n");
 	e1000e_clear_vfta(hw);
 
 	/* Setup the receive address. */
 	e1000e_init_rx_addrs(hw, mac->rar_entry_count);
 
 	/* Zero out the Multicast HASH table */
-	hw_dbg(hw, "Zeroing the MTA\n");
+	e_dbg("Zeroing the MTA\n");
 	for (i = 0; i < mac->mta_reg_count; i++)
 		E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
 
@@ -989,7 +988,7 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
 	/* SW Reset the PHY so all changes take effect */
 	ret_val = e1000e_commit_phy(hw);
 	if (ret_val) {
-		hw_dbg(hw, "Error Resetting the PHY\n");
+		e_dbg("Error Resetting the PHY\n");
 		return ret_val;
 	}
 
drivers/net/e1000e/hw.h +0 -11
index aaea41e..44808b0 100644
@@ -925,15 +925,4 @@ struct e1000_hw {
 	} dev_spec;
 };
 
-#ifdef DEBUG
-#define hw_dbg(hw, format, arg...) \
-	printk(KERN_DEBUG "%s: " format, e1000e_get_hw_dev_name(hw), ##arg)
-#else
-static inline int __attribute__ ((format (printf, 2, 3)))
-hw_dbg(struct e1000_hw *hw, const char *format, ...)
-{
-	return 0;
-}
-#endif
-
 #endif
drivers/net/e1000e/ich8lan.c +34 -35

267 lines not on this page · raw message

drivers/net/e1000e/lib.c +61 -61

456 lines not on this page · raw message

drivers/net/e1000e/netdev.c +9 -19
index ff9f9f1..0b53523 100644
@@ -65,17 +65,6 @@ static const struct e1000_info *e1000_info_tbl[] = {
 	[board_pchlan]		= &e1000_pch_info,
 };
 
-#ifdef DEBUG
-/**
- * e1000_get_hw_dev_name - return device name string
- * used by hardware layer to print debugging information
- **/
-char *e1000e_get_hw_dev_name(struct e1000_hw *hw)
-{
-	return hw->adapter->netdev->name;
-}
-#endif
-
 /**
  * e1000_desc_unused - calculate if we have unused descriptors
  **/
@@ -415,6 +404,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 {
 	struct net_device *netdev = adapter->netdev;
 	struct pci_dev *pdev = adapter->pdev;
+	struct e1000_hw *hw = &adapter->hw;
 	struct e1000_ring *rx_ring = adapter->rx_ring;
 	struct e1000_rx_desc *rx_desc, *next_rxd;
 	struct e1000_buffer *buffer_info, *next_buffer;
@@ -464,8 +454,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 		 * packet, also make sure the frame isn't just CRC only */
 		if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) {
 			/* All receives must fit into a single buffer */
-			e_dbg("%s: Receive packet consumed multiple buffers\n",
-			      netdev->name);
+			e_dbg("Receive packet consumed multiple buffers\n");
 			/* recycle */
 			buffer_info->skb = skb;
 			goto next_desc;
@@ -682,6 +671,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter)
 static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 				  int *work_done, int work_to_do)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	union e1000_rx_desc_packet_split *rx_desc, *next_rxd;
 	struct net_device *netdev = adapter->netdev;
 	struct pci_dev *pdev = adapter->pdev;
@@ -725,8 +715,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 		buffer_info->dma = 0;
 
 		if (!(staterr & E1000_RXD_STAT_EOP)) {
-			e_dbg("%s: Packet Split buffers didn't pick up the "
-			      "full packet\n", netdev->name);
+			e_dbg("Packet Split buffers didn't pick up the full "
+			      "packet\n");
 			dev_kfree_skb_irq(skb);
 			goto next_desc;
 		}
@@ -739,8 +729,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 		length = le16_to_cpu(rx_desc->wb.middle.length0);
 
 		if (!length) {
-			e_dbg("%s: Last part of the packet spanning multiple "
-			      "descriptors\n", netdev->name);
+			e_dbg("Last part of the packet spanning multiple "
+			      "descriptors\n");
 			dev_kfree_skb_irq(skb);
 			goto next_desc;
 		}
@@ -2931,7 +2921,7 @@ static irqreturn_t e1000_intr_msi_test(int irq, void *data)
 	struct e1000_hw *hw = &adapter->hw;
 	u32 icr = er32(ICR);
 
-	e_dbg("%s: icr is %08X\n", netdev->name, icr);
+	e_dbg("icr is %08X\n", icr);
 	if (icr & E1000_ICR_RXSEQ) {
 		adapter->flags &= ~FLAG_MSI_TEST_FAILED;
 		wmb();
@@ -3001,7 +2991,7 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter)
 		goto msi_test_failed;
 
 	/* okay so the test worked, restore settings */
-	e_dbg("%s: MSI interrupt test succeeded!\n", netdev->name);
+	e_dbg("MSI interrupt test succeeded!\n");
 msi_test_failed:
 	e1000e_set_interrupt_capability(adapter);
 	e1000_request_irq(adapter);
drivers/net/e1000e/phy.c +46 -46

328 lines not on this page · raw message

#11 lore raw

PATCH 12/23 e1000e: cleanup ops function pointers

In reply to Jeff Kirsher

From: Bruce Allan <[email protected]>

The phy and nvm operations structures have function pointers that contain "phy" and "nvm" in the pointer names which are redundant since the structures are already obviously in phy and nvm structures.

---

 drivers/net/e1000e/82571.c   |   54 +++++++--------
 drivers/net/e1000e/e1000.h   |   16 ++--
 drivers/net/e1000e/es2lan.c  |   26 ++++---
 drivers/net/e1000e/hw.h      |   32 ++++-----
 drivers/net/e1000e/ich8lan.c |  156 +++++++++++++++++++++---------------------
 drivers/net/e1000e/lib.c     |    6 +-
 drivers/net/e1000e/netdev.c  |    4 +
 drivers/net/e1000e/phy.c     |  110 +++++++++++++++---------------
 8 files changed, 201 insertions(+), 203 deletions(-)
drivers/net/e1000e/82571.c +27 -27
index 680b7c7..6fe1b3c 100644
@@ -1671,64 +1671,64 @@ static struct e1000_mac_operations e82571_mac_ops = {
 };
 
 static struct e1000_phy_operations e82_phy_ops_igp = {
-	.acquire_phy		= e1000_get_hw_semaphore_82571,
+	.acquire		= e1000_get_hw_semaphore_82571,
 	.check_reset_block	= e1000e_check_reset_block_generic,
-	.commit_phy		= NULL,
+	.commit			= NULL,
 	.force_speed_duplex	= e1000e_phy_force_speed_duplex_igp,
 	.get_cfg_done		= e1000_get_cfg_done_82571,
 	.get_cable_length	= e1000e_get_cable_length_igp_2,
-	.get_phy_info		= e1000e_get_phy_info_igp,
-	.read_phy_reg		= e1000e_read_phy_reg_igp,
-	.release_phy		= e1000_put_hw_semaphore_82571,
-	.reset_phy		= e1000e_phy_hw_reset_generic,
+	.get_info		= e1000e_get_phy_info_igp,
+	.read_reg		= e1000e_read_phy_reg_igp,
+	.release		= e1000_put_hw_semaphore_82571,
+	.reset			= e1000e_phy_hw_reset_generic,
 	.set_d0_lplu_state	= e1000_set_d0_lplu_state_82571,
 	.set_d3_lplu_state	= e1000e_set_d3_lplu_state,
-	.write_phy_reg		= e1000e_write_phy_reg_igp,
+	.write_reg		= e1000e_write_phy_reg_igp,
 	.cfg_on_link_up      	= NULL,
 };
 
 static struct e1000_phy_operations e82_phy_ops_m88 = {
-	.acquire_phy		= e1000_get_hw_semaphore_82571,
+	.acquire		= e1000_get_hw_semaphore_82571,
 	.check_reset_block	= e1000e_check_reset_block_generic,
-	.commit_phy		= e1000e_phy_sw_reset,
+	.commit			= e1000e_phy_sw_reset,
 	.force_speed_duplex	= e1000e_phy_force_speed_duplex_m88,
 	.get_cfg_done		= e1000e_get_cfg_done,
 	.get_cable_length	= e1000e_get_cable_length_m88,
-	.get_phy_info		= e1000e_get_phy_info_m88,
-	.read_phy_reg		= e1000e_read_phy_reg_m88,
-	.release_phy		= e1000_put_hw_semaphore_82571,
-	.reset_phy		= e1000e_phy_hw_reset_generic,
+	.get_info		= e1000e_get_phy_info_m88,
+	.read_reg		= e1000e_read_phy_reg_m88,
+	.release		= e1000_put_hw_semaphore_82571,
+	.reset			= e1000e_phy_hw_reset_generic,
 	.set_d0_lplu_state	= e1000_set_d0_lplu_state_82571,
 	.set_d3_lplu_state	= e1000e_set_d3_lplu_state,
-	.write_phy_reg		= e1000e_write_phy_reg_m88,
+	.write_reg		= e1000e_write_phy_reg_m88,
 	.cfg_on_link_up      	= NULL,
 };
 
 static struct e1000_phy_operations e82_phy_ops_bm = {
-	.acquire_phy		= e1000_get_hw_semaphore_82571,
+	.acquire		= e1000_get_hw_semaphore_82571,
 	.check_reset_block	= e1000e_check_reset_block_generic,
-	.commit_phy		= e1000e_phy_sw_reset,
+	.commit			= e1000e_phy_sw_reset,
 	.force_speed_duplex	= e1000e_phy_force_speed_duplex_m88,
 	.get_cfg_done		= e1000e_get_cfg_done,
 	.get_cable_length	= e1000e_get_cable_length_m88,
-	.get_phy_info		= e1000e_get_phy_info_m88,
-	.read_phy_reg		= e1000e_read_phy_reg_bm2,
-	.release_phy		= e1000_put_hw_semaphore_82571,
-	.reset_phy		= e1000e_phy_hw_reset_generic,
+	.get_info		= e1000e_get_phy_info_m88,
+	.read_reg		= e1000e_read_phy_reg_bm2,
+	.release		= e1000_put_hw_semaphore_82571,
+	.reset			= e1000e_phy_hw_reset_generic,
 	.set_d0_lplu_state	= e1000_set_d0_lplu_state_82571,
 	.set_d3_lplu_state	= e1000e_set_d3_lplu_state,
-	.write_phy_reg		= e1000e_write_phy_reg_bm2,
+	.write_reg		= e1000e_write_phy_reg_bm2,
 	.cfg_on_link_up      	= NULL,
 };
 
 static struct e1000_nvm_operations e82571_nvm_ops = {
-	.acquire_nvm		= e1000_acquire_nvm_82571,
-	.read_nvm		= e1000e_read_nvm_eerd,
-	.release_nvm		= e1000_release_nvm_82571,
-	.update_nvm		= e1000_update_nvm_checksum_82571,
+	.acquire		= e1000_acquire_nvm_82571,
+	.read			= e1000e_read_nvm_eerd,
+	.release		= e1000_release_nvm_82571,
+	.update			= e1000_update_nvm_checksum_82571,
 	.valid_led_default	= e1000_valid_led_default_82571,
-	.validate_nvm		= e1000_validate_nvm_checksum_82571,
-	.write_nvm		= e1000_write_nvm_82571,
+	.validate		= e1000_validate_nvm_checksum_82571,
+	.write			= e1000_write_nvm_82571,
 };
 
 struct e1000_info e1000_82571_info = {
drivers/net/e1000e/e1000.h +8 -8
index dac00a0..602598c 100644
@@ -584,7 +584,7 @@ extern s32 e1000_get_cable_length_82577(struct e1000_hw *hw);
 
 static inline s32 e1000_phy_hw_reset(struct e1000_hw *hw)
 {
-	return hw->phy.ops.reset_phy(hw);
+	return hw->phy.ops.reset(hw);
 }
 
 static inline s32 e1000_check_reset_block(struct e1000_hw *hw)
@@ -594,12 +594,12 @@ static inline s32 e1000_check_reset_block(struct e1000_hw *hw)
 
 static inline s32 e1e_rphy(struct e1000_hw *hw, u32 offset, u16 *data)
 {
-	return hw->phy.ops.read_phy_reg(hw, offset, data);
+	return hw->phy.ops.read_reg(hw, offset, data);
 }
 
 static inline s32 e1e_wphy(struct e1000_hw *hw, u32 offset, u16 data)
 {
-	return hw->phy.ops.write_phy_reg(hw, offset, data);
+	return hw->phy.ops.write_reg(hw, offset, data);
 }
 
 static inline s32 e1000_get_cable_length(struct e1000_hw *hw)
@@ -619,27 +619,27 @@ extern s32 e1000e_read_mac_addr(struct e1000_hw *hw);
 
 static inline s32 e1000_validate_nvm_checksum(struct e1000_hw *hw)
 {
-	return hw->nvm.ops.validate_nvm(hw);
+	return hw->nvm.ops.validate(hw);
 }
 
 static inline s32 e1000e_update_nvm_checksum(struct e1000_hw *hw)
 {
-	return hw->nvm.ops.update_nvm(hw);
+	return hw->nvm.ops.update(hw);
 }
 
 static inline s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 {
-	return hw->nvm.ops.read_nvm(hw, offset, words, data);
+	return hw->nvm.ops.read(hw, offset, words, data);
 }
 
 static inline s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 {
-	return hw->nvm.ops.write_nvm(hw, offset, words, data);
+	return hw->nvm.ops.write(hw, offset, words, data);
 }
 
 static inline s32 e1000_get_phy_info(struct e1000_hw *hw)
 {
-	return hw->phy.ops.get_phy_info(hw);
+	return hw->phy.ops.get_info(hw);
 }
 
 static inline s32 e1000e_check_mng_mode(struct e1000_hw *hw)
drivers/net/e1000e/es2lan.c +13 -13
index f5601c5..d024e20 100644
@@ -1378,30 +1378,30 @@ static struct e1000_mac_operations es2_mac_ops = {
 };
 
 static struct e1000_phy_operations es2_phy_ops = {
-	.acquire_phy		= e1000_acquire_phy_80003es2lan,
+	.acquire		= e1000_acquire_phy_80003es2lan,
 	.check_reset_block	= e1000e_check_reset_block_generic,
-	.commit_phy	 	= e1000e_phy_sw_reset,
+	.commit		 	= e1000e_phy_sw_reset,
 	.force_speed_duplex 	= e1000_phy_force_speed_duplex_80003es2lan,
 	.get_cfg_done       	= e1000_get_cfg_done_80003es2lan,
 	.get_cable_length   	= e1000_get_cable_length_80003es2lan,
-	.get_phy_info       	= e1000e_get_phy_info_m88,
-	.read_phy_reg       	= e1000_read_phy_reg_gg82563_80003es2lan,
-	.release_phy		= e1000_release_phy_80003es2lan,
-	.reset_phy	  	= e1000e_phy_hw_reset_generic,
+	.get_info       	= e1000e_get_phy_info_m88,
+	.read_reg       	= e1000_read_phy_reg_gg82563_80003es2lan,
+	.release		= e1000_release_phy_80003es2lan,
+	.reset		  	= e1000e_phy_hw_reset_generic,
 	.set_d0_lplu_state  	= NULL,
 	.set_d3_lplu_state  	= e1000e_set_d3_lplu_state,
-	.write_phy_reg      	= e1000_write_phy_reg_gg82563_80003es2lan,
+	.write_reg      	= e1000_write_phy_reg_gg82563_80003es2lan,
 	.cfg_on_link_up      	= e1000_cfg_on_link_up_80003es2lan,
 };
 
 static struct e1000_nvm_operations es2_nvm_ops = {
-	.acquire_nvm		= e1000_acquire_nvm_80003es2lan,
-	.read_nvm		= e1000e_read_nvm_eerd,
-	.release_nvm		= e1000_release_nvm_80003es2lan,
-	.update_nvm		= e1000e_update_nvm_checksum_generic,
+	.acquire		= e1000_acquire_nvm_80003es2lan,
+	.read			= e1000e_read_nvm_eerd,
+	.release		= e1000_release_nvm_80003es2lan,
+	.update			= e1000e_update_nvm_checksum_generic,
 	.valid_led_default	= e1000e_valid_led_default,
-	.validate_nvm		= e1000e_validate_nvm_checksum_generic,
-	.write_nvm		= e1000_write_nvm_80003es2lan,
+	.validate		= e1000e_validate_nvm_checksum_generic,
+	.write			= e1000_write_nvm_80003es2lan,
 };
 
 struct e1000_info e1000_es2_info = {
drivers/net/e1000e/hw.h +16 -16
index 44808b0..842d8e7 100644
@@ -755,34 +755,34 @@ struct e1000_mac_operations {
 
 /* Function pointers for the PHY. */
 struct e1000_phy_operations {
-	s32  (*acquire_phy)(struct e1000_hw *);
+	s32  (*acquire)(struct e1000_hw *);
+	s32  (*cfg_on_link_up)(struct e1000_hw *);
 	s32  (*check_polarity)(struct e1000_hw *);
 	s32  (*check_reset_block)(struct e1000_hw *);
-	s32  (*commit_phy)(struct e1000_hw *);
+	s32  (*commit)(struct e1000_hw *);
 	s32  (*force_speed_duplex)(struct e1000_hw *);
 	s32  (*get_cfg_done)(struct e1000_hw *hw);
 	s32  (*get_cable_length)(struct e1000_hw *);
-	s32  (*get_phy_info)(struct e1000_hw *);
-	s32  (*read_phy_reg)(struct e1000_hw *, u32, u16 *);
-	s32  (*read_phy_reg_locked)(struct e1000_hw *, u32, u16 *);
-	void (*release_phy)(struct e1000_hw *);
-	s32  (*reset_phy)(struct e1000_hw *);
+	s32  (*get_info)(struct e1000_hw *);
+	s32  (*read_reg)(struct e1000_hw *, u32, u16 *);
+	s32  (*read_reg_locked)(struct e1000_hw *, u32, u16 *);
+	void (*release)(struct e1000_hw *);
+	s32  (*reset)(struct e1000_hw *);
 	s32  (*set_d0_lplu_state)(struct e1000_hw *, bool);
 	s32  (*set_d3_lplu_state)(struct e1000_hw *, bool);
-	s32  (*write_phy_reg)(struct e1000_hw *, u32, u16);
-	s32  (*write_phy_reg_locked)(struct e1000_hw *, u32, u16);
-	s32  (*cfg_on_link_up)(struct e1000_hw *);
+	s32  (*write_reg)(struct e1000_hw *, u32, u16);
+	s32  (*write_reg_locked)(struct e1000_hw *, u32, u16);
 };
 
 /* Function pointers for the NVM. */
 struct e1000_nvm_operations {
-	s32  (*acquire_nvm)(struct e1000_hw *);
-	s32  (*read_nvm)(struct e1000_hw *, u16, u16, u16 *);
-	void (*release_nvm)(struct e1000_hw *);
-	s32  (*update_nvm)(struct e1000_hw *);
+	s32  (*acquire)(struct e1000_hw *);
+	s32  (*read)(struct e1000_hw *, u16, u16, u16 *);
+	void (*release)(struct e1000_hw *);
+	s32  (*update)(struct e1000_hw *);
 	s32  (*valid_led_default)(struct e1000_hw *, u16 *);
-	s32  (*validate_nvm)(struct e1000_hw *);
-	s32  (*write_nvm)(struct e1000_hw *, u16, u16, u16 *);
+	s32  (*validate)(struct e1000_hw *);
+	s32  (*write)(struct e1000_hw *, u16, u16, u16 *);
 };
 
 struct e1000_mac_info {
drivers/net/e1000e/ich8lan.c +77 -79

428 lines not on this page · raw message

drivers/net/e1000e/lib.c +3 -3
index fa31c51..f664fc0 100644
@@ -1985,7 +1985,7 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 		return -E1000_ERR_NVM;
 	}
 
-	ret_val = nvm->ops.acquire_nvm(hw);
+	ret_val = nvm->ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
@@ -1996,7 +1996,7 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 
 		ret_val = e1000_ready_nvm_eeprom(hw);
 		if (ret_val) {
-			nvm->ops.release_nvm(hw);
+			nvm->ops.release(hw);
 			return ret_val;
 		}
 
@@ -2035,7 +2035,7 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 	}
 
 	msleep(10);
-	nvm->ops.release_nvm(hw);
+	nvm->ops.release(hw);
 	return 0;
 }
 
drivers/net/e1000e/netdev.c +2 -2
index 0b53523..6eb9693 100644
@@ -4419,7 +4419,7 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
 	e1e_wphy(&adapter->hw, BM_WUC, E1000_WUC_PME_EN);
 
 	/* activate PHY wakeup */
-	retval = hw->phy.ops.acquire_phy(hw);
+	retval = hw->phy.ops.acquire(hw);
 	if (retval) {
 		e_err("Could not acquire PHY\n");
 		return retval;
@@ -4436,7 +4436,7 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
 	if (retval)
 		e_err("Could not set PHY Host Wakeup bit\n");
 out:
-	hw->phy.ops.release_phy(hw);
+	hw->phy.ops.release(hw);
 
 	return retval;
 }
drivers/net/e1000e/phy.c +55 -55

405 lines not on this page · raw message

#12 lore raw

PATCH 13/23 e1000e: update copyright information

In reply to Jeff Kirsher

From: Bruce Allan <[email protected]>

---

 drivers/net/e1000e/82571.c   |    2 +-
 drivers/net/e1000e/defines.h |    2 +-
 drivers/net/e1000e/e1000.h   |    2 +-
 drivers/net/e1000e/es2lan.c  |    2 +-
 drivers/net/e1000e/ethtool.c |    2 +-
 drivers/net/e1000e/hw.h      |    2 +-
 drivers/net/e1000e/ich8lan.c |    2 +-
 drivers/net/e1000e/lib.c     |    2 +-
 drivers/net/e1000e/netdev.c  |    4 ++--
 drivers/net/e1000e/param.c   |    2 +-
 drivers/net/e1000e/phy.c     |    2 +-
 11 files changed, 12 insertions(+), 12 deletions(-)
drivers/net/e1000e/82571.c +1 -1
index 6fe1b3c..a984bc3 100644
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
drivers/net/e1000e/defines.h +1 -1
index 1190167..86d2809 100644
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
drivers/net/e1000e/e1000.h +1 -1
index 602598c..5ac8675 100644
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
drivers/net/e1000e/es2lan.c +1 -1
index d024e20..103dc64 100644
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
drivers/net/e1000e/ethtool.c +1 -1
index fd79214..b6243ca 100644
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
drivers/net/e1000e/hw.h +1 -1
index 842d8e7..426155c 100644
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
drivers/net/e1000e/ich8lan.c +1 -1
index dd94fc2..191a4e3 100644
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
drivers/net/e1000e/lib.c +1 -1
index f664fc0..0c6ad0e 100644
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
drivers/net/e1000e/netdev.c +2 -2
index 6eb9693..a571676 100644
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -5364,7 +5364,7 @@ static int __init e1000_init_module(void)
 	int ret;
 	printk(KERN_INFO "%s: Intel(R) PRO/1000 Network Driver - %s\n",
 	       e1000e_driver_name, e1000e_driver_version);
-	printk(KERN_INFO "%s: Copyright (c) 1999-2008 Intel Corporation.\n",
+	printk(KERN_INFO "%s: Copyright (c) 1999 - 2009 Intel Corporation.\n",
 	       e1000e_driver_name);
 	ret = pci_register_driver(&e1000_driver);
 	pm_qos_add_requirement(PM_QOS_CPU_DMA_LATENCY, e1000e_driver_name,
drivers/net/e1000e/param.c +1 -1
index 1342e0b..2e39977 100644
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
drivers/net/e1000e/phy.c +1 -1
index 765dc38..440f366 100644
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
#13 lore raw

PATCH 14/23 e1000e: remove comments regarding a non-existent api module

In reply to Jeff Kirsher

From: Bruce Allan <[email protected]>

---

 drivers/net/e1000e/82571.c  |    9 +--------
 drivers/net/e1000e/es2lan.c |   30 +++++++-----------------------
 2 files changed, 8 insertions(+), 31 deletions(-)
drivers/net/e1000e/82571.c +1 -8
index a984bc3..7cdf176 100644
@@ -72,8 +72,6 @@ static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw);
 /**
  *  e1000_init_phy_params_82571 - Init PHY func ptrs.
  *  @hw: pointer to the HW structure
- *
- *  This is a function pointer entry point called by the api module.
  **/
 static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)
 {
@@ -136,8 +134,6 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)
 /**
  *  e1000_init_nvm_params_82571 - Init NVM func ptrs.
  *  @hw: pointer to the HW structure
- *
- *  This is a function pointer entry point called by the api module.
  **/
 static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw)
 {
@@ -201,8 +197,6 @@ static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw)
 /**
  *  e1000_init_mac_params_82571 - Init MAC func ptrs.
  *  @hw: pointer to the HW structure
- *
- *  This is a function pointer entry point called by the api module.
  **/
 static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
 {
@@ -830,8 +824,7 @@ static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active)
  *  e1000_reset_hw_82571 - Reset hardware
  *  @hw: pointer to the HW structure
  *
- *  This resets the hardware into a known state.  This is a
- *  function pointer entry point called by the api module.
+ *  This resets the hardware into a known state.
  **/
 static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
 {
drivers/net/e1000e/es2lan.c +7 -23
index 103dc64..2d14156 100644
@@ -116,8 +116,6 @@ static s32  e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
 /**
  *  e1000_init_phy_params_80003es2lan - Init ESB2 PHY func ptrs.
  *  @hw: pointer to the HW structure
- *
- *  This is a function pointer entry point called by the api module.
  **/
 static s32 e1000_init_phy_params_80003es2lan(struct e1000_hw *hw)
 {
@@ -147,8 +145,6 @@ static s32 e1000_init_phy_params_80003es2lan(struct e1000_hw *hw)
 /**
  *  e1000_init_nvm_params_80003es2lan - Init ESB2 NVM func ptrs.
  *  @hw: pointer to the HW structure
- *
- *  This is a function pointer entry point called by the api module.
  **/
 static s32 e1000_init_nvm_params_80003es2lan(struct e1000_hw *hw)
 {
@@ -195,8 +191,6 @@ static s32 e1000_init_nvm_params_80003es2lan(struct e1000_hw *hw)
 /**
  *  e1000_init_mac_params_80003es2lan - Init ESB2 MAC func ptrs.
  *  @hw: pointer to the HW structure
- *
- *  This is a function pointer entry point called by the api module.
  **/
 static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter)
 {
@@ -267,8 +261,7 @@ static s32 e1000_get_variants_80003es2lan(struct e1000_adapter *adapter)
  *  e1000_acquire_phy_80003es2lan - Acquire rights to access PHY
  *  @hw: pointer to the HW structure
  *
- *  A wrapper to acquire access rights to the correct PHY.  This is a
- *  function pointer entry point called by the api module.
+ *  A wrapper to acquire access rights to the correct PHY.
  **/
 static s32 e1000_acquire_phy_80003es2lan(struct e1000_hw *hw)
 {
@@ -282,8 +275,7 @@ static s32 e1000_acquire_phy_80003es2lan(struct e1000_hw *hw)
  *  e1000_release_phy_80003es2lan - Release rights to access PHY
  *  @hw: pointer to the HW structure
  *
- *  A wrapper to release access rights to the correct PHY.  This is a
- *  function pointer entry point called by the api module.
+ *  A wrapper to release access rights to the correct PHY.
  **/
 static void e1000_release_phy_80003es2lan(struct e1000_hw *hw)
 {
@@ -328,8 +320,7 @@ static void e1000_release_mac_csr_80003es2lan(struct e1000_hw *hw)
  *  e1000_acquire_nvm_80003es2lan - Acquire rights to access NVM
  *  @hw: pointer to the HW structure
  *
- *  Acquire the semaphore to access the EEPROM.  This is a function
- *  pointer entry point called by the api module.
+ *  Acquire the semaphore to access the EEPROM.
  **/
 static s32 e1000_acquire_nvm_80003es2lan(struct e1000_hw *hw)
 {
@@ -351,8 +342,7 @@ static s32 e1000_acquire_nvm_80003es2lan(struct e1000_hw *hw)
  *  e1000_release_nvm_80003es2lan - Relinquish rights to access NVM
  *  @hw: pointer to the HW structure
  *
- *  Release the semaphore used to access the EEPROM.  This is a
- *  function pointer entry point called by the api module.
+ *  Release the semaphore used to access the EEPROM.
  **/
 static void e1000_release_nvm_80003es2lan(struct e1000_hw *hw)
 {
@@ -434,8 +424,7 @@ static void e1000_release_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask)
  *  @offset: offset of the register to read
  *  @data: pointer to the data returned from the operation
  *
- *  Read the GG82563 PHY register.  This is a function pointer entry
- *  point called by the api module.
+ *  Read the GG82563 PHY register.
  **/
 static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
 						  u32 offset, u16 *data)
@@ -499,8 +488,7 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
  *  @offset: offset of the register to read
  *  @data: value to write to the register
  *
- *  Write to the GG82563 PHY register.  This is a function pointer entry
- *  point called by the api module.
+ *  Write to the GG82563 PHY register.
  **/
 static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
 						   u32 offset, u16 data)
@@ -565,8 +553,7 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
  *  @words: number of words to write
  *  @data: buffer of data to write to the NVM
  *
- *  Write "words" of data to the ESB2 NVM.  This is a function
- *  pointer entry point called by the api module.
+ *  Write "words" of data to the ESB2 NVM.
  **/
 static s32 e1000_write_nvm_80003es2lan(struct e1000_hw *hw, u16 offset,
 				       u16 words, u16 *data)
@@ -730,7 +717,6 @@ static s32 e1000_get_cable_length_80003es2lan(struct e1000_hw *hw)
  *  @duplex: pointer to duplex buffer
  *
  *  Retrieve the current speed and duplex configuration.
- *  This is a function pointer entry point called by the api module.
  **/
 static s32 e1000_get_link_up_info_80003es2lan(struct e1000_hw *hw, u16 *speed,
 					      u16 *duplex)
@@ -756,7 +742,6 @@ static s32 e1000_get_link_up_info_80003es2lan(struct e1000_hw *hw, u16 *speed,
  *  @hw: pointer to the HW structure
  *
  *  Perform a global reset to the ESB2 controller.
- *  This is a function pointer entry point called by the api module.
  **/
 static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
 {
@@ -805,7 +790,6 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
  *  @hw: pointer to the HW structure
  *
  *  Initialize the hw bits, LED, VFTA, MTA, link and hw counters.
- *  This is a function pointer entry point called by the api module.
  **/
 static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
 {
#14 lore raw

PATCH 15/23 e1000e: provide comment for 82571 workaround

In reply to Jeff Kirsher

From: Bruce Allan <[email protected]>

---

 drivers/net/e1000e/82571.c |    7 +++++++
 1 files changed, 7 insertions(+), 0 deletions(-)
drivers/net/e1000e/82571.c +7 -0
index 7cdf176..0e8aa34 100644
@@ -1114,6 +1114,13 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
 		reg |= (1 << 22);
 		ew32(GCR, reg);
 
+		/*
+		 * Workaround for hardware errata.
+		 * apply workaround for hardware errata documented in errata
+		 * docs Fixes issue where some error prone or unreliable PCIe
+		 * completions are occurring, particularly with ASPM enabled.
+		 * Without fix, issue can cause tx timeouts.
+		 */
 		reg = er32(GCR2);
 		reg |= 1;
 		ew32(GCR2, reg);
#15 lore raw

PATCH 16/23 e1000e: set bools to true/false instead of 1/0

In reply to Jeff Kirsher

From: Bruce Allan <[email protected]>

Set booleans to 'true' or 'false' to make it clear it is a boolean. Also change instances of TRUE/FALSE in comments to lowercase true/false.

---

 drivers/net/e1000e/82571.c   |    7 ++++---
 drivers/net/e1000e/es2lan.c  |    3 ++-
 drivers/net/e1000e/ich8lan.c |   18 +++++++++---------
 drivers/net/e1000e/lib.c     |   24 ++++++++++++------------
 drivers/net/e1000e/phy.c     |    6 +++---
 5 files changed, 30 insertions(+), 28 deletions(-)
drivers/net/e1000e/82571.c +4 -3
index 0e8aa34..468dd7d 100644
@@ -230,7 +230,8 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
 	/* Set rar entry count */
 	mac->rar_entry_count = E1000_RAR_ENTRIES;
 	/* Set if manageability features are enabled. */
-	mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK) ? 1 : 0;
+	mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK)
+	                ? true : false;
 
 	/* check for link */
 	switch (hw->phy.media_type) {
@@ -753,7 +754,7 @@ static s32 e1000_get_cfg_done_82571(struct e1000_hw *hw)
 /**
  *  e1000_set_d0_lplu_state_82571 - Set Low Power Linkup D0 state
  *  @hw: pointer to the HW structure
- *  @active: TRUE to enable LPLU, FALSE to disable
+ *  @active: true to enable LPLU, false to disable
  *
  *  Sets the LPLU D0 state according to the active flag.  When activating LPLU
  *  this function also disables smart speed and vice versa.  LPLU will not be
@@ -1521,7 +1522,7 @@ static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data)
 bool e1000e_get_laa_state_82571(struct e1000_hw *hw)
 {
 	if (hw->mac.type != e1000_82571)
-		return 0;
+		return false;
 
 	return hw->dev_spec.e82571.laa_is_present;
 }
drivers/net/e1000e/es2lan.c +2 -1
index 2d14156..795d433 100644
@@ -213,7 +213,8 @@ static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter)
 	/* Set rar entry count */
 	mac->rar_entry_count = E1000_RAR_ENTRIES;
 	/* Set if manageability features are enabled. */
-	mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK) ? 1 : 0;
+	mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK)
+                        ? true : false;
 
 	/* check for link */
 	switch (hw->phy.media_type) {
drivers/net/e1000e/ich8lan.c +9 -9
index 191a4e3..f8ee0f2 100644
@@ -401,7 +401,7 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw)
 
 	/* Clear shadow ram */
 	for (i = 0; i < nvm->word_size; i++) {
-		dev_spec->shadow_ram[i].modified = 0;
+		dev_spec->shadow_ram[i].modified = false;
 		dev_spec->shadow_ram[i].value    = 0xFFFF;
 	}
 
@@ -430,7 +430,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
 	if (mac->type == e1000_ich8lan)
 		mac->rar_entry_count--;
 	/* Set if manageability features are enabled. */
-	mac->arc_subsystem_valid = 1;
+	mac->arc_subsystem_valid = true;
 
 	/* LED operations */
 	switch (mac->type) {
@@ -464,7 +464,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
 
 	/* Enable PCS Lock-loss workaround for ICH8 */
 	if (mac->type == e1000_ich8lan)
-		e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, 1);
+		e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true);
 
 	return 0;
 }
@@ -1403,7 +1403,7 @@ out:
 /**
  *  e1000_set_d0_lplu_state_ich8lan - Set Low Power Linkup D0 state
  *  @hw: pointer to the HW structure
- *  @active: TRUE to enable LPLU, FALSE to disable
+ *  @active: true to enable LPLU, false to disable
  *
  *  Sets the LPLU D0 state according to the active flag.  When
  *  activating LPLU this function also disables smart speed
@@ -1489,7 +1489,7 @@ static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
 /**
  *  e1000_set_d3_lplu_state_ich8lan - Set Low Power Linkup D3 state
  *  @hw: pointer to the HW structure
- *  @active: TRUE to enable LPLU, FALSE to disable
+ *  @active: true to enable LPLU, false to disable
  *
  *  Sets the LPLU D3 state according to the active flag.  When
  *  activating LPLU this function also disables smart speed
@@ -1952,7 +1952,7 @@ static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
 	nvm->ops.acquire(hw);
 
 	for (i = 0; i < words; i++) {
-		dev_spec->shadow_ram[offset+i].modified = 1;
+		dev_spec->shadow_ram[offset+i].modified = true;
 		dev_spec->shadow_ram[offset+i].value = data[i];
 	}
 
@@ -2111,7 +2111,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 
 	/* Great!  Everything worked, we can now clear the cached entries. */
 	for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) {
-		dev_spec->shadow_ram[i].modified = 0;
+		dev_spec->shadow_ram[i].modified = false;
 		dev_spec->shadow_ram[i].value = 0xFFFF;
 	}
 
@@ -3083,8 +3083,8 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw)
  *  @hw: pointer to the HW structure
  *  @state: boolean value used to set the current Kumeran workaround state
  *
- *  If ICH8, set the current Kumeran workaround state (enabled - TRUE
- *  /disabled - FALSE).
+ *  If ICH8, set the current Kumeran workaround state (enabled - true
+ *  /disabled - false).
  **/
 void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
 						 bool state)
drivers/net/e1000e/lib.c +12 -12
index 0c6ad0e..d173bf8 100644
@@ -371,7 +371,7 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
 	if (!link)
 		return ret_val; /* No link detected */
 
-	mac->get_link_status = 0;
+	mac->get_link_status = false;
 
 	/*
 	 * Check if there was DownShift, must be checked
@@ -1603,7 +1603,7 @@ void e1000e_reset_adaptive(struct e1000_hw *hw)
 	mac->ifs_step_size = IFS_STEP;
 	mac->ifs_ratio = IFS_RATIO;
 
-	mac->in_ifs_mode = 0;
+	mac->in_ifs_mode = false;
 	ew32(AIT, 0);
 }
 
@@ -1620,7 +1620,7 @@ void e1000e_update_adaptive(struct e1000_hw *hw)
 
 	if ((mac->collision_delta * mac->ifs_ratio) > mac->tx_packet_delta) {
 		if (mac->tx_packet_delta > MIN_NUM_XMITS) {
-			mac->in_ifs_mode = 1;
+			mac->in_ifs_mode = true;
 			if (mac->current_ifs_val < mac->ifs_max_val) {
 				if (!mac->current_ifs_val)
 					mac->current_ifs_val = mac->ifs_min_val;
@@ -1634,7 +1634,7 @@ void e1000e_update_adaptive(struct e1000_hw *hw)
 		if (mac->in_ifs_mode &&
 		    (mac->tx_packet_delta <= MIN_NUM_XMITS)) {
 			mac->current_ifs_val = 0;
-			mac->in_ifs_mode = 0;
+			mac->in_ifs_mode = false;
 			ew32(AIT, 0);
 		}
 	}
@@ -2277,7 +2277,7 @@ bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw)
 
 	/* No manageability, no filtering */
 	if (!e1000e_check_mng_mode(hw)) {
-		hw->mac.tx_pkt_filtering = 0;
+		hw->mac.tx_pkt_filtering = false;
 		return 0;
 	}
 
@@ -2287,7 +2287,7 @@ bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw)
 	 */
 	ret_val = e1000_mng_enable_host_if(hw);
 	if (ret_val != 0) {
-		hw->mac.tx_pkt_filtering = 0;
+		hw->mac.tx_pkt_filtering = false;
 		return ret_val;
 	}
 
@@ -2306,17 +2306,17 @@ bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw)
 	 * take the safe route of assuming Tx filtering is enabled.
 	 */
 	if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) {
-		hw->mac.tx_pkt_filtering = 1;
+		hw->mac.tx_pkt_filtering = true;
 		return 1;
 	}
 
 	/* Cookie area is valid, make the final check for filtering. */
 	if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING)) {
-		hw->mac.tx_pkt_filtering = 0;
+		hw->mac.tx_pkt_filtering = false;
 		return 0;
 	}
 
-	hw->mac.tx_pkt_filtering = 1;
+	hw->mac.tx_pkt_filtering = true;
 	return 1;
 }
 
@@ -2473,7 +2473,7 @@ bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw)
 {
 	u32 manc;
 	u32 fwsm, factps;
-	bool ret_val = 0;
+	bool ret_val = false;
 
 	manc = er32(MANC);
 
@@ -2488,13 +2488,13 @@ bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw)
 		if (!(factps & E1000_FACTPS_MNGCG) &&
 		    ((fwsm & E1000_FWSM_MODE_MASK) ==
 		     (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT))) {
-			ret_val = 1;
+			ret_val = true;
 			return ret_val;
 		}
 	} else {
 		if ((manc & E1000_MANC_SMBUS_EN) &&
 		    !(manc & E1000_MANC_ASF_EN)) {
-			ret_val = 1;
+			ret_val = true;
 			return ret_val;
 		}
 	}
drivers/net/e1000e/phy.c +3 -3
index 440f366..99d53fa 100644
@@ -834,7 +834,7 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw)
 	msleep(100);
 
 	/* disable lplu d0 during driver init */
-	ret_val = e1000_set_d0_lplu_state(hw, 0);
+	ret_val = e1000_set_d0_lplu_state(hw, false);
 	if (ret_val) {
 		e_dbg("Error Disabling LPLU D0\n");
 		return ret_val;
@@ -1545,7 +1545,7 @@ s32 e1000e_check_downshift(struct e1000_hw *hw)
 		break;
 	default:
 		/* speed downshift not supported */
-		phy->speed_downgraded = 0;
+		phy->speed_downgraded = false;
 		return 0;
 	}
 
@@ -1907,7 +1907,7 @@ s32 e1000e_get_phy_info_igp(struct e1000_hw *hw)
 		return -E1000_ERR_CONFIG;
 	}
 
-	phy->polarity_correction = 1;
+	phy->polarity_correction = true;
 
 	ret_val = e1000_check_polarity_igp(hw);
 	if (ret_val)
#16 lore raw

PATCH 17/23 e1000e: cleanup - shift indentation left by exiting early in e1000_tso

In reply to Jeff Kirsher

From: Bruce Allan <[email protected]>

---

 drivers/net/e1000e/netdev.c |  104 +++++++++++++++++++++----------------------
 1 files changed, 50 insertions(+), 54 deletions(-)
drivers/net/e1000e/netdev.c +50 -54
index a571676..25b0ef8 100644
@@ -3725,68 +3725,64 @@ static int e1000_tso(struct e1000_adapter *adapter,
 	u8 ipcss, ipcso, tucss, tucso, hdr_len;
 	int err;
 
-	if (skb_is_gso(skb)) {
-		if (skb_header_cloned(skb)) {
-			err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
-			if (err)
-				return err;
-		}
+	if (!skb_is_gso(skb))
+		return 0;
 
-		hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
-		mss = skb_shinfo(skb)->gso_size;
-		if (skb->protocol == htons(ETH_P_IP)) {
-			struct iphdr *iph = ip_hdr(skb);
-			iph->tot_len = 0;
-			iph->check = 0;
-			tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
-								 iph->daddr, 0,
-								 IPPROTO_TCP,
-								 0);
-			cmd_length = E1000_TXD_CMD_IP;
-			ipcse = skb_transport_offset(skb) - 1;
-		} else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
-			ipv6_hdr(skb)->payload_len = 0;
-			tcp_hdr(skb)->check =
-				~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
-						 &ipv6_hdr(skb)->daddr,
-						 0, IPPROTO_TCP, 0);
-			ipcse = 0;
-		}
-		ipcss = skb_network_offset(skb);
-		ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
-		tucss = skb_transport_offset(skb);
-		tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
-		tucse = 0;
+	if (skb_header_cloned(skb)) {
+		err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
+		if (err)
+			return err;
+	}
 
-		cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
-			       E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
+	hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+	mss = skb_shinfo(skb)->gso_size;
+	if (skb->protocol == htons(ETH_P_IP)) {
+		struct iphdr *iph = ip_hdr(skb);
+		iph->tot_len = 0;
+		iph->check = 0;
+		tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr,
+		                                         0, IPPROTO_TCP, 0);
+		cmd_length = E1000_TXD_CMD_IP;
+		ipcse = skb_transport_offset(skb) - 1;
+	} else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
+		ipv6_hdr(skb)->payload_len = 0;
+		tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+		                                       &ipv6_hdr(skb)->daddr,
+		                                       0, IPPROTO_TCP, 0);
+		ipcse = 0;
+	}
+	ipcss = skb_network_offset(skb);
+	ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
+	tucss = skb_transport_offset(skb);
+	tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
+	tucse = 0;
 
-		i = tx_ring->next_to_use;
-		context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
-		buffer_info = &tx_ring->buffer_info[i];
+	cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
+	               E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
 
-		context_desc->lower_setup.ip_fields.ipcss  = ipcss;
-		context_desc->lower_setup.ip_fields.ipcso  = ipcso;
-		context_desc->lower_setup.ip_fields.ipcse  = cpu_to_le16(ipcse);
-		context_desc->upper_setup.tcp_fields.tucss = tucss;
-		context_desc->upper_setup.tcp_fields.tucso = tucso;
-		context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
-		context_desc->tcp_seg_setup.fields.mss     = cpu_to_le16(mss);
-		context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
-		context_desc->cmd_and_length = cpu_to_le32(cmd_length);
+	i = tx_ring->next_to_use;
+	context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
+	buffer_info = &tx_ring->buffer_info[i];
 
-		buffer_info->time_stamp = jiffies;
-		buffer_info->next_to_watch = i;
+	context_desc->lower_setup.ip_fields.ipcss  = ipcss;
+	context_desc->lower_setup.ip_fields.ipcso  = ipcso;
+	context_desc->lower_setup.ip_fields.ipcse  = cpu_to_le16(ipcse);
+	context_desc->upper_setup.tcp_fields.tucss = tucss;
+	context_desc->upper_setup.tcp_fields.tucso = tucso;
+	context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
+	context_desc->tcp_seg_setup.fields.mss     = cpu_to_le16(mss);
+	context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
+	context_desc->cmd_and_length = cpu_to_le32(cmd_length);
 
-		i++;
-		if (i == tx_ring->count)
-			i = 0;
-		tx_ring->next_to_use = i;
+	buffer_info->time_stamp = jiffies;
+	buffer_info->next_to_watch = i;
 
-		return 1;
-	}
+	i++;
+	if (i == tx_ring->count)
+		i = 0;
+	tx_ring->next_to_use = i;
 
-	return 0;
+	return 1;
 }
 
 static bool e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb)
#17 lore raw

PATCH 18/23 e1000e: cleanup functions that clear hardware statistics

In reply to Jeff Kirsher

From: Bruce Allan <[email protected]>

The e1000_clear_hw_cntrs_*() functions read the registers to clear them. There is no reason to save the register contents so the temp variable can be removed.

---

 drivers/net/e1000e/82571.c   |   70 +++++++++++++++++++--------------------
 drivers/net/e1000e/es2lan.c  |   70 +++++++++++++++++++--------------------
 drivers/net/e1000e/ich8lan.c |   23 ++++++-------
 drivers/net/e1000e/lib.c     |   76 ++++++++++++++++++++----------------------
 4 files changed, 116 insertions(+), 123 deletions(-)
drivers/net/e1000e/82571.c +34 -36
index 468dd7d..c5dc1b3 100644
@@ -1613,44 +1613,42 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw)
  **/
 static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw)
 {
-	u32 temp;
-
 	e1000e_clear_hw_cntrs_base(hw);
 
-	temp = er32(PRC64);
-	temp = er32(PRC127);
-	temp = er32(PRC255);
-	temp = er32(PRC511);
-	temp = er32(PRC1023);
-	temp = er32(PRC1522);
-	temp = er32(PTC64);
-	temp = er32(PTC127);
-	temp = er32(PTC255);
-	temp = er32(PTC511);
-	temp = er32(PTC1023);
-	temp = er32(PTC1522);
-
-	temp = er32(ALGNERRC);
-	temp = er32(RXERRC);
-	temp = er32(TNCRS);
-	temp = er32(CEXTERR);
-	temp = er32(TSCTC);
-	temp = er32(TSCTFC);
-
-	temp = er32(MGTPRC);
-	temp = er32(MGTPDC);
-	temp = er32(MGTPTC);
-
-	temp = er32(IAC);
-	temp = er32(ICRXOC);
-
-	temp = er32(ICRXPTC);
-	temp = er32(ICRXATC);
-	temp = er32(ICTXPTC);
-	temp = er32(ICTXATC);
-	temp = er32(ICTXQEC);
-	temp = er32(ICTXQMTC);
-	temp = er32(ICRXDMTC);
+	er32(PRC64);
+	er32(PRC127);
+	er32(PRC255);
+	er32(PRC511);
+	er32(PRC1023);
+	er32(PRC1522);
+	er32(PTC64);
+	er32(PTC127);
+	er32(PTC255);
+	er32(PTC511);
+	er32(PTC1023);
+	er32(PTC1522);
+
+	er32(ALGNERRC);
+	er32(RXERRC);
+	er32(TNCRS);
+	er32(CEXTERR);
+	er32(TSCTC);
+	er32(TSCTFC);
+
+	er32(MGTPRC);
+	er32(MGTPDC);
+	er32(MGTPTC);
+
+	er32(IAC);
+	er32(ICRXOC);
+
+	er32(ICRXPTC);
+	er32(ICRXATC);
+	er32(ICTXPTC);
+	er32(ICTXATC);
+	er32(ICTXQEC);
+	er32(ICTXQMTC);
+	er32(ICRXDMTC);
 }
 
 static struct e1000_mac_operations e82571_mac_ops = {
drivers/net/e1000e/es2lan.c +34 -36

78 lines not on this page · raw message

drivers/net/e1000e/ich8lan.c +11 -12
index f8ee0f2..2c1d08e 100644
@@ -3402,24 +3402,23 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw)
  **/
 static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
 {
-	u32 temp;
 	u16 phy_data;
 
 	e1000e_clear_hw_cntrs_base(hw);
 
-	temp = er32(ALGNERRC);
-	temp = er32(RXERRC);
-	temp = er32(TNCRS);
-	temp = er32(CEXTERR);
-	temp = er32(TSCTC);
-	temp = er32(TSCTFC);
+	er32(ALGNERRC);
+	er32(RXERRC);
+	er32(TNCRS);
+	er32(CEXTERR);
+	er32(TSCTC);
+	er32(TSCTFC);
 
-	temp = er32(MGTPRC);
-	temp = er32(MGTPDC);
-	temp = er32(MGTPTC);
+	er32(MGTPRC);
+	er32(MGTPDC);
+	er32(MGTPTC);
 
-	temp = er32(IAC);
-	temp = er32(ICRXOC);
+	er32(IAC);
+	er32(ICRXOC);
 
 	/* Clear PHY statistics registers */
 	if ((hw->phy.type == e1000_phy_82578) ||
drivers/net/e1000e/lib.c +37 -39

82 lines not on this page · raw message

#18 lore raw

PATCH 19/23 e1000e: set pm_qos DMA latency requirement per interface when needed

In reply to Jeff Kirsher

From: Bruce Allan <[email protected]>

It was pointed out a pm_qos DMA latency requirement set when the driver is loaded when parts that support early receive of jumbo frames are probed could have that requirement overidden if another part supported by the driver (one that does not support early receive of jumbo frames) is probed later. Change the DMA latency requirement to be per-interface if needed instead of per driver.

---

 drivers/net/e1000e/netdev.c |   47 ++++++++++++++++++++++++++-----------------
 1 files changed, 28 insertions(+), 19 deletions(-)
drivers/net/e1000e/netdev.c +28 -19
index 25b0ef8..39f01d9 100644
@@ -2472,21 +2472,23 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
 	 * packet size is equal or larger than the specified value (in 8 byte
 	 * units), e.g. using jumbo frames when setting to E1000_ERT_2048
 	 */
-	if ((adapter->flags & FLAG_HAS_ERT) &&
-	    (adapter->netdev->mtu > ETH_DATA_LEN)) {
-		u32 rxdctl = er32(RXDCTL(0));
-		ew32(RXDCTL(0), rxdctl | 0x3);
-		ew32(ERT, E1000_ERT_2048 | (1 << 13));
-		/*
-		 * With jumbo frames and early-receive enabled, excessive
-		 * C4->C2 latencies result in dropped transactions.
-		 */
-		pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
-					  e1000e_driver_name, 55);
-	} else {
-		pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
-					  e1000e_driver_name,
-					  PM_QOS_DEFAULT_VALUE);
+	if (adapter->flags & FLAG_HAS_ERT) {
+		if (adapter->netdev->mtu > ETH_DATA_LEN) {
+			u32 rxdctl = er32(RXDCTL(0));
+			ew32(RXDCTL(0), rxdctl | 0x3);
+			ew32(ERT, E1000_ERT_2048 | (1 << 13));
+			/*
+			 * With jumbo frames and early-receive enabled,
+			 * excessive C-state transition latencies result in
+			 * dropped transactions.
+			 */
+			pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
+						  adapter->netdev->name, 55);
+		} else {
+			pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
+						  adapter->netdev->name,
+						  PM_QOS_DEFAULT_VALUE);
+		}
 	}
 
 	/* Enable Receives */
@@ -2804,6 +2806,12 @@ int e1000e_up(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
 
+	/* DMA latency requirement to workaround early-receive/jumbo issue */
+	if (adapter->flags & FLAG_HAS_ERT)
+		pm_qos_add_requirement(PM_QOS_CPU_DMA_LATENCY,
+		                       adapter->netdev->name,
+				       PM_QOS_DEFAULT_VALUE);
+
 	/* hardware has been reset, we need to reload some things */
 	e1000_configure(adapter);
 
@@ -2864,6 +2872,10 @@ void e1000e_down(struct e1000_adapter *adapter)
 	e1000_clean_tx_ring(adapter);
 	e1000_clean_rx_ring(adapter);
 
+	if (adapter->flags & FLAG_HAS_ERT)
+		pm_qos_remove_requirement(PM_QOS_CPU_DMA_LATENCY,
+		                          adapter->netdev->name);
+
 	/*
 	 * TODO: for power management, we could drop the link and
 	 * pci_disable_device here.
@@ -5363,9 +5375,7 @@ static int __init e1000_init_module(void)
 	printk(KERN_INFO "%s: Copyright (c) 1999 - 2009 Intel Corporation.\n",
 	       e1000e_driver_name);
 	ret = pci_register_driver(&e1000_driver);
-	pm_qos_add_requirement(PM_QOS_CPU_DMA_LATENCY, e1000e_driver_name,
-			       PM_QOS_DEFAULT_VALUE);
-				
+
 	return ret;
 }
 module_init(e1000_init_module);
@@ -5379,7 +5389,6 @@ module_init(e1000_init_module);
 static void __exit e1000_exit_module(void)
 {
 	pci_unregister_driver(&e1000_driver);
-	pm_qos_remove_requirement(PM_QOS_CPU_DMA_LATENCY, e1000e_driver_name);
 }
 module_exit(e1000_exit_module);
 
#19 lore raw

PATCH 20/23 e1000e: do not error out on identification LED init failure

In reply to Jeff Kirsher

From: Bruce Allan <[email protected]>

A failure to initialize the identification LED is not a fatal condition and should allow the init path to continue.

---

 drivers/net/e1000e/82571.c   |    5 ++---
 drivers/net/e1000e/es2lan.c  |    5 ++---
 drivers/net/e1000e/ich8lan.c |    5 ++---
 3 files changed, 6 insertions(+), 9 deletions(-)
drivers/net/e1000e/82571.c +2 -3
index c5dc1b3..474f4e4 100644
@@ -948,10 +948,9 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw)
 
 	/* Initialize identification LED */
 	ret_val = e1000e_id_led_init(hw);
-	if (ret_val) {
+	if (ret_val)
 		e_dbg("Error initializing identification LED\n");
-		return ret_val;
-	}
+		/* This is not fatal and we should not stop init due to this */
 
 	/* Disabling VLAN filtering */
 	e_dbg("Initializing the IEEE VLAN\n");
drivers/net/e1000e/es2lan.c +2 -3
index 8a08956..6ba1228 100644
@@ -803,10 +803,9 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
 
 	/* Initialize identification LED */
 	ret_val = e1000e_id_led_init(hw);
-	if (ret_val) {
+	if (ret_val)
 		e_dbg("Error initializing identification LED\n");
-		return ret_val;
-	}
+		/* This is not fatal and we should not stop init due to this */
 
 	/* Disabling VLAN filtering */
 	e_dbg("Initializing the IEEE VLAN\n");
drivers/net/e1000e/ich8lan.c +2 -3
index 2c1d08e..fe6dc3d 100644
@@ -2722,10 +2722,9 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
 
 	/* Initialize identification LED */
 	ret_val = mac->ops.id_led_init(hw);
-	if (ret_val) {
+	if (ret_val)
 		e_dbg("Error initializing identification LED\n");
-		return ret_val;
-	}
+		/* This is not fatal and we should not stop init due to this */
 
 	/* Setup the receive address. */
 	e1000e_init_rx_addrs(hw, mac->rar_entry_count);
#20 lore raw

PATCH 21/23 e1000e: remove redundant might_sleep()

In reply to Jeff Kirsher

From: Bruce Allan <[email protected]>

Now that mutex_lock() calls might_sleep() the driver doesn't have to here.

---

 drivers/net/e1000e/ich8lan.c |    2 --
 1 files changed, 0 insertions(+), 2 deletions(-)
drivers/net/e1000e/ich8lan.c +0 -2
index fe6dc3d..f991b14 100644
@@ -630,8 +630,6 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
 	u32 extcnf_ctrl, timeout = PHY_CFG_TIMEOUT;
 	s32 ret_val = 0;
 
-	might_sleep();
-
 	mutex_lock(&swflag_mutex);
 
 	while (timeout) {
#21 lore raw

PATCH 22/23 e1000e: cosmetic - group local variables of the same type

In reply to Jeff Kirsher

From: Bruce Allan <[email protected]>

---

 drivers/net/e1000e/82571.c   |   11 +++--------
 drivers/net/e1000e/es2lan.c  |    6 ++----
 drivers/net/e1000e/ich8lan.c |    8 ++++----
 3 files changed, 9 insertions(+), 16 deletions(-)
drivers/net/e1000e/82571.c +3 -8
index 474f4e4..62bbc6e 100644
@@ -693,8 +693,7 @@ static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
 				      u16 words, u16 *data)
 {
 	struct e1000_nvm_info *nvm = &hw->nvm;
-	u32 i;
-	u32 eewr = 0;
+	u32 i, eewr = 0;
 	s32 ret_val = 0;
 
 	/*
@@ -829,10 +828,7 @@ static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active)
  **/
 static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
 {
-	u32 ctrl;
-	u32 extcnf_ctrl;
-	u32 ctrl_ext;
-	u32 icr;
+	u32 ctrl, extcnf_ctrl, ctrl_ext, icr;
 	s32 ret_val;
 	u16 i = 0;
 
@@ -941,8 +937,7 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw)
 	struct e1000_mac_info *mac = &hw->mac;
 	u32 reg_data;
 	s32 ret_val;
-	u16 i;
-	u16 rar_count = mac->rar_entry_count;
+	u16 i, rar_count = mac->rar_entry_count;
 
 	e1000_initialize_hw_bits_82571(hw);
 
drivers/net/e1000e/es2lan.c +2 -4
index 6ba1228..e505798 100644
@@ -695,8 +695,7 @@ static s32 e1000_get_cable_length_80003es2lan(struct e1000_hw *hw)
 {
 	struct e1000_phy_info *phy = &hw->phy;
 	s32 ret_val;
-	u16 phy_data;
-	u16 index;
+	u16 phy_data, index;
 
 	ret_val = e1e_rphy(hw, GG82563_PHY_DSP_DISTANCE, &phy_data);
 	if (ret_val)
@@ -746,8 +745,7 @@ static s32 e1000_get_link_up_info_80003es2lan(struct e1000_hw *hw, u16 *speed,
  **/
 static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
 {
-	u32 ctrl;
-	u32 icr;
+	u32 ctrl, icr;
 	s32 ret_val;
 
 	/*
drivers/net/e1000e/ich8lan.c +4 -4
index f991b14..568bb25 100644
@@ -706,7 +706,9 @@ static void e1000_release_swflag_ich8lan(struct e1000_hw *hw)
  **/
 static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw)
 {
-	u32 fwsm = er32(FWSM);
+	u32 fwsm;
+
+	fwsm = er32(FWSM);
 
 	return (fwsm & E1000_FWSM_MODE_MASK) ==
 		(E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT);
@@ -2349,9 +2351,7 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank)
 	u32 flash_bank_size = nvm->flash_bank_size * 2;
 	s32 ret_val;
 	s32 count = 0;
-	s32 iteration;
-	s32 sector_size;
-	s32 j;
+	s32 j, iteration, sector_size;
 
 	hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
 
#22 lore raw

PATCH 23/23 e1000e: update Tx Unit hang detection message

In reply to Jeff Kirsher

From: Bruce Allan <[email protected]>

The Tx unit hang detection code in e1000e detects other hangs caused by hardware components (e.g. Rx, DMA units), but it is not possible to detect exactly which component is hung so it has always assumed a Tx unit hang. When dumping a message to the system log because of a hang, this patch adds more data to help narrow the cause of the issue and makes the message non-Tx-specific. Because this new code reads PHY registers which can sleep, move it off to a workqueue. This and all previously existing work tasks in the driver are now cancelled when the driver is removed.

---

 drivers/net/e1000e/e1000.h  |    1 +
 drivers/net/e1000e/netdev.c |   46 ++++++++++++++++++++++++++++++++++++-------
 2 files changed, 39 insertions(+), 8 deletions(-)
drivers/net/e1000e/e1000.h +1 -0
index 5ac8675..c9fcef7 100644
@@ -364,6 +364,7 @@ struct e1000_adapter {
 	struct work_struct downshift_task;
 	struct work_struct update_phy_task;
 	struct work_struct led_blink_task;
+	struct work_struct print_hang_task;
 };
 
 struct e1000_info {
drivers/net/e1000e/netdev.c +38 -8

93 lines not on this page · raw message