be2net: Issue fw_init/clean cmds to fw
Subsystems (2)
PATCH 3/5 be2net: Issue fw_init/clean cmds to fw
These cmds are issued to the fw in probe/resume and remove/suspend paths to help fw execute some initialization and cleanup code.
This change needed the be_hw_up() code to be refactored as be_get_config().
Signed-off-by Sathya Perla <[email protected]>
--- drivers/net/benet/be_cmds.c | 51 +++++++++++++++++++++++++++++++++++++++++++ drivers/net/benet/be_cmds.h | 2 + drivers/net/benet/be_main.c | 50 ++++++++++++++++++++++++++++------------- 3 files changed, 87 insertions(+), 16 deletions(-)
drivers/net/benet/be_cmds.c +51 -0
@@ -357,6 +357,57 @@ static struct be_mcc_wrb *wrb_from_mccq(struct be_adapter *adapter)return wrb; } +/* Tell fw we're about to start firing cmds by writing a +* special pattern across the wrb hdr; uses mbox +*/ +int be_cmd_fw_init (struct be_adapter *adapter) +{ +u8 *wrb; +int status; + +spin_lock (&adapter->mbox_lock); + + wrb = (u8 *)wrb_from_mbox (adapter); + *wrb++ =0xFF ; + *wrb++ =0x12 ; + *wrb++ =0x34 ; + *wrb++ =0xFF ; + *wrb++ =0xFF ; + *wrb++ =0x56 ; + *wrb++ =0x78 ; + *wrb =0xFF ; + + status =be_mbox_notify_wait (adapter); + +spin_unlock (&adapter->mbox_lock); +return status; +} + +/* Tell fw we're done with firing cmds by writing a +* special pattern across the wrb hdr; uses mbox +*/ +int be_cmd_fw_clean (struct be_adapter *adapter) +{ +u8 *wrb; +int status; + +spin_lock (&adapter->mbox_lock); + + wrb = (u8 *)wrb_from_mbox (adapter); + *wrb++ =0xFF ; + *wrb++ =0xAA ; + *wrb++ =0xBB ; + *wrb++ =0xFF ; + *wrb++ =0xFF ; + *wrb++ =0xCC ; + *wrb++ =0xDD ; + *wrb =0xFF ; + + status =be_mbox_notify_wait (adapter); + +spin_unlock (&adapter->mbox_lock); +return status; +}int be_cmd_eq_create (struct be_adapter *adapter,struct be_queue_info *eq,int eq_delay) {
drivers/net/benet/be_cmds.h +2 -0
@@ -851,3 +851,5 @@ extern int be_cmd_write_flashrom(struct be_adapter *adapter, struct be_dma_mem *cmd, u32 flash_oper, u32 flash_opcode, u32 buf_size);extern int be_cmd_get_flash_crc (struct be_adapter *adapter,u8 *flashed_crc); +extern int be_cmd_fw_init (struct be_adapter *adapter); +extern int be_cmd_fw_clean (struct be_adapter *adapter);
drivers/net/benet/be_main.c +34 -16
111 lines not on this page · raw message
Signature · 1 line
1.6.5.2
From: Sathya Perla <[email protected]>
Date: Mon, 23 Nov 2009 13:32:03 +0530
Quoted 6 lines
These cmds are issued to the fw in probe/resume and remove/suspend paths to help fw execute some initialization and cleanup code.
This change needed the
be_hw_up()code to be refactored asbe_get_config().Signed-off-by Sathya Perla <[email protected]>
Applied.