Skip to contentSkip to conversation

mpc83xx: Add NAND boot support for MPC8315E-RDB boards

PATCH Superseded Anton Vorontsov 3 participants 8 messages Nov 19, 2009 – Jan 12, 2010 Kbuild

lore
Share & tools
lore

Anton Vorontsov

author
#0 lore raw

PATCH 1/1 mpc83xx: Add NAND boot support for MPC8315E-RDB boards

The core support for NAND booting is there already, so this patch is pretty straightforward.

There is one trick though: top level Makefile expects nand_spl to be in nand_spl/board/$(BOARDDIR), but we can fully reuse the code from mpc8313erdb boards, and so to not duplicate the code we just symlink nand_spl/board/freescale/mpc8315erdb to mpc8313erdb.

Signed-off-by Anton Vorontsov <[email protected]>
---
 MAKEALL                                   |    1 +
 Makefile                                  |   11 ++++
 board/freescale/mpc8315erdb/config.mk     |    6 ++
 board/freescale/mpc8315erdb/mpc8315erdb.c |   42 +++++++++++++
 board/freescale/mpc8315erdb/sdram.c       |    7 ++
 include/configs/MPC8315ERDB.h             |   90 +++++++++++++++++++++++------
 6 files changed, 138 insertions(+), 19 deletions(-)
MAKEALL +1 -0
index d63c5c2..821e3e8 100755
@@ -360,6 +360,7 @@ LIST_83xx="		\
 	MPC8313ERDB_33	\
 	MPC8313ERDB_NAND_66	\
 	MPC8315ERDB	\
+	MPC8315ERDB_NAND	\
 	MPC8323ERDB	\
 	MPC832XEMDS	\
 	MPC832XEMDS_ATM	\
Makefile +11 -0
index bcb3fe9..77e73f1 100644
@@ -2291,8 +2291,19 @@ MPC8313ERDB_NAND_66_config: unconfig
 		echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
 	fi ;
 
+MPC8315ERDB_NAND_config \
 MPC8315ERDB_config: unconfig
+	if [ "$(findstring _NAND_,$@)" ] ; then \
+		$(XECHO) -n "...NAND..." ; \
+		echo "TEXT_BASE = 0x00100000" > \
+			$(obj)board/freescale/mpc8315erdb/config.tmp ; \
+		echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \
+		ln -sf mpc8313erdb nand_spl/board/freescale/mpc8315erdb ; \
+	fi ;
 	@$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
+	@if [ "$(findstring _NAND_,$@)" ] ; then \
+		echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
+	fi ;
 
 MPC8323ERDB_config:	unconfig
 	@$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale
board/freescale/mpc8315erdb/config.mk +6 -0
index f768264..fd72a14 100644
@@ -1 +1,7 @@
+ifndef NAND_SPL
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+endif
+
+ifndef TEXT_BASE
 TEXT_BASE = 0xFE000000
+endif
board/freescale/mpc8315erdb/mpc8315erdb.c +42 -0

57 lines not on this page · raw message

board/freescale/mpc8315erdb/sdram.c +7 -0
index ead7b1e..02c99e9 100644
@@ -54,6 +54,7 @@ static void resume_from_sleep(void)
  * This is useful for faster booting in configs where the RAM is unlikely
  * to be changed, or for things like NAND booting where space is tight.
  */
+#ifndef CONFIG_SYS_RAMBOOT
 static long fixed_sdram(void)
 {
 	volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;

@@ -100,6 +101,12 @@ static long fixed_sdram(void)
 
 	return msize;
 }
+#else
+static long fixed_sdram(void)
+{
+	return CONFIG_SYS_DDR_SIZE * 1024 * 1024;
+}
+#endif /* CONFIG_SYS_RAMBOOT */
 
 phys_size_t initdram(int board_type)
 {
include/configs/MPC8315ERDB.h +71 -19

175 lines not on this page · raw message

Signature · 1 line
1.6.3.3
#1 lore raw

PATCH 1/1 mpc83xx: Add NAND boot support for MPC8315E-RDB boards

Quoted 49 lines · Anton Vorontsov

The core support for NAND booting is there already, so this patch is pretty straightforward.

There is one trick though: top level Makefile expects nand_spl to be in nand_spl/board/$(BOARDDIR), but we can fully reuse the code from mpc8313erdb boards, and so to not duplicate the code we just symlink nand_spl/board/freescale/mpc8315erdb to mpc8313erdb.

Signed-off-by Anton Vorontsov <[email protected]>

---

MAKEALL                                   |    1 +
Makefile                                  |   11 ++++
board/freescale/mpc8315erdb/config.mk     |    6 ++
board/freescale/mpc8315erdb/mpc8315erdb.c |   42 +++++++++++++
board/freescale/mpc8315erdb/sdram.c       |    7 ++
include/configs/MPC8315ERDB.h             |   90 ++++++++++++++++++++ 
+++------
6 files changed, 138 insertions(+), 19 deletions(-)
MAKEALL +1 -0
index d63c5c2..821e3e8 100755
@@ -360,6 +360,7 @@ LIST_83xx="		\
 	MPC8313ERDB_33	\
 	MPC8313ERDB_NAND_66	\
 	MPC8315ERDB	\
+	MPC8315ERDB_NAND	\
 	MPC8323ERDB	\
 	MPC832XEMDS	\
 	MPC832XEMDS_ATM	\
Makefile +1 -0
index bcb3fe9..77e73f1 100644
@@ -2291,8 +2291,19 @@ MPC8313ERDB_NAND_66_config: unconfig
 		echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
 	fi ;
 
+MPC8315ERDB_NAND_config \

MPC8315ERDB_config: unconfig

Makefile +7 -0
+	if [ "$(findstring _NAND_,$@)" ] ; then \
+		$(XECHO) -n "...NAND..." ; \
+		echo "TEXT_BASE = 0x00100000" > \
+			$(obj)board/freescale/mpc8315erdb/config.tmp ; \
+		echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \
+		ln -sf mpc8313erdb nand_spl/board/freescale/mpc8315erdb ; \
+	fi ;

	@$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale

Makefile MPC8313ERDB_NAND_66_config: unconfig · line 2306

Quoted 3 lines
Makefile +3 -0
+	@if [ "$(findstring _NAND_,$@)" ] ; then \
+		echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
+	fi ;

Use the new -t option to mkconfig.

Quoted 3 lines

MPC8323ERDB_config: unconfig

	@$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale

- k

author
#2 lore raw

PATCH v2 1/1 mpc83xx: Add NAND boot support for MPC8315E-RDB boards

The core support for NAND booting is there already, so this patch is pretty straightforward.

There is one trick though: top level Makefile expects nand_spl to be in nand_spl/board/$(BOARDDIR), but we can fully reuse the code from mpc8313erdb boards, and so to not duplicate the code we just symlink nand_spl/board/freescale/mpc8315erdb to mpc8313erdb.

Signed-off-by Anton Vorontsov <[email protected]>

---

On Thu, Nov 19, 2009 at 01:17:36PM -0600, Kumar Gala wrote:
[...]

Quoted 6 lines

Review

Quoted 4 lines
	@$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
(quoted diff) +3 -0
+	@if [ "$(findstring _NAND_,$@)" ] ; then \
+		echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
+	fi ;

Use the new -t option to mkconfig.

Thanks for the hint.

Here is the updated patch.

 MAKEALL                                   |    1 +
 Makefile                                  |    6 ++-
 board/freescale/mpc8315erdb/config.mk     |    8 +++
 board/freescale/mpc8315erdb/mpc8315erdb.c |   42 +++++++++++++
 board/freescale/mpc8315erdb/sdram.c       |    7 ++
 include/configs/MPC8315ERDB.h             |   95 +++++++++++++++++++++++------
 6 files changed, 139 insertions(+), 20 deletions(-)
MAKEALL +1 -0
index d63c5c2..821e3e8 100755
@@ -360,6 +360,7 @@ LIST_83xx="		\
 	MPC8313ERDB_33	\
 	MPC8313ERDB_NAND_66	\
 	MPC8315ERDB	\
+	MPC8315ERDB_NAND	\
 	MPC8323ERDB	\
 	MPC832XEMDS	\
 	MPC832XEMDS_ATM	\
Makefile +5 -1
index bcb3fe9..13c34f8 100644
@@ -2291,8 +2291,12 @@ MPC8313ERDB_NAND_66_config: unconfig
 		echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
 	fi ;
 
+MPC8315ERDB_NAND_config \
 MPC8315ERDB_config: unconfig
-	@$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
+	if [ "$(findstring _NAND_,$@)" ] ; then \
+		ln -sf mpc8313erdb nand_spl/board/freescale/mpc8315erdb ; \
+	fi ;
+	@$(MKCONFIG) -t $(@:_config=) MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
 
 MPC8323ERDB_config:	unconfig
 	@$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale
board/freescale/mpc8315erdb/config.mk +8 -0
index f768264..bf972fb 100644
@@ -1 +1,9 @@
+ifndef NAND_SPL
+ifeq ($(CONFIG_MK_NAND), y)
+TEXT_BASE = $(CONFIG_RAMBOOT_TEXT_BASE)
+endif
+endif
+
+ifndef TEXT_BASE
 TEXT_BASE = 0xFE000000
+endif
board/freescale/mpc8315erdb/mpc8315erdb.c +42 -0

57 lines not on this page · raw message

board/freescale/mpc8315erdb/sdram.c +7 -0
index ead7b1e..02c99e9 100644
@@ -54,6 +54,7 @@ static void resume_from_sleep(void)
  * This is useful for faster booting in configs where the RAM is unlikely
  * to be changed, or for things like NAND booting where space is tight.
  */
+#ifndef CONFIG_SYS_RAMBOOT
 static long fixed_sdram(void)
 {
 	volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;

@@ -100,6 +101,12 @@ static long fixed_sdram(void)
 
 	return msize;
 }
+#else
+static long fixed_sdram(void)
+{
+	return CONFIG_SYS_DDR_SIZE * 1024 * 1024;
+}
+#endif /* CONFIG_SYS_RAMBOOT */
 
 phys_size_t initdram(int board_type)
 {
include/configs/MPC8315ERDB.h +76 -19

186 lines not on this page · raw message

Signature · 1 line
1.6.3.3
#3 lore raw

PATCH v2 1/1 mpc83xx: Add NAND boot support for MPC8315E-RDB boards

Quoted 9 lines · On Tue, 24 Nov 2009 20:12:12 +0300 Anton Vorontsov <[email protected]>…

Here is the updated patch.

 MAKEALL                                   |    1 +
 Makefile                                  |    6 ++-
 board/freescale/mpc8315erdb/config.mk     |    8 +++
 board/freescale/mpc8315erdb/mpc8315erdb.c |   42 +++++++++++++
 board/freescale/mpc8315erdb/sdram.c       |    7 ++
 include/configs/MPC8315ERDB.h             |   95 +++++++++++++++++++++++------
 6 files changed, 139 insertions(+), 20 deletions(-)

please add NAND boot instructions to doc/README.mpc8315erdb also.

Quoted 17 lines
MAKEALL +1 -0
index d63c5c2..821e3e8 100755
@@ -360,6 +360,7 @@ LIST_83xx="		\
 	MPC8313ERDB_33	\
 	MPC8313ERDB_NAND_66	\
 	MPC8315ERDB	\
+	MPC8315ERDB_NAND	\
 	MPC8323ERDB	\
 	MPC832XEMDS	\
 	MPC832XEMDS_ATM	\
Makefile +0 -0
index bcb3fe9..13c34f8 100644

Makefile MPC8313ERDB_NAND_66_config: unconfig · line 2296

Quoted 7 lines
Makefile +2 -1
@@ -2291,8 +2291,12 @@ MPC8313ERDB_NAND_66_config: unconfig
 		echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
 	fi ;
 
+MPC8315ERDB_NAND_config \
 MPC8315ERDB_config: unconfig
-	@$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
+	if [ "$(findstring _NAND_,$@)" ] ; then \

missing leading @ - s/if/@if/.

Makefile MPC8313ERDB_NAND_66_config: unconfig · line 2298

Quoted 2 lines
Makefile +2 -0
+		ln -sf mpc8313erdb nand_spl/board/freescale/mpc8315erdb ; \
+	fi ;

can we instead permanently rename nand_spl/board/freescale/mpc8313erdb to mpc831xerdb...argh, probably not without merging the non-NAND parts also...

Quoted 1 line
Makefile +1 -0
+++ b/board/freescale/mpc8315erdb/mpc8315erdb.c

...

Makefile

Quoted 9 lines
Makefile +9 -0
+void board_init_f(ulong bootflag)
+{
+	board_early_init_f();
+	NS16550_init((NS16550_t)(CONFIG_SYS_IMMR + 0x4500),
+		     CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
+	puts("NAND boot... ");
+	init_timebase();
+	initdram(0);
+	relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000, (gd_t *)gd,

use CONFIG_SYS_NAND_U_BOOT_RELOC_SP

meanwhile, 8315 NAND boot doesn't build when applied to u-boot's next branch:

Configuring for MPC8315ERDB board...
sdram.o: In function `fixed_sdram':
/home/r1aaha/git/u-boot/nand_spl/board/freescale/mpc8313erdb/sdram.c:72: undefined reference to `udelay'

perhaps due to some confusion with setting CONFIG_SYS_RAMBOOT?

Kim

author
#4 lore raw

PATCH v3 1/1 mpc83xx: Add NAND boot support for MPC8315E-RDB boards

The core support for NAND booting is there already, so this patch is pretty straightforward.

There is one trick though: top level Makefile expects nand_spl to be in nand_spl/board/$(BOARDDIR), but we can fully reuse the code from mpc8313erdb boards, and so to not duplicate the code we just symlink nand_spl/board/freescale/mpc8315erdb to mpc8313erdb.

Signed-off-by Anton Vorontsov <[email protected]>

---

Quoted 4 lines · Kim Phillips
Quoted 2 lines
 include/configs/MPC8315ERDB.h             |   95 +++++++++++++++++++++++------
 6 files changed, 139 insertions(+), 20 deletions(-)

please add NAND boot instructions to doc/README.mpc8315erdb also.

Done.

Quoted 3 lines

Review

Quoted 1 line
(quoted diff) +1 -0
+	if [ "$(findstring _NAND_,$@)" ] ; then \

missing leading @ - s/if/@if/.

Fixed, thanks.

Quoted 6 lines

Review

Quoted 2 lines
(quoted diff) +2 -0
+		ln -sf mpc8313erdb nand_spl/board/freescale/mpc8315erdb ; \
+	fi ;

can we instead permanently rename nand_spl/board/freescale/mpc8313erdb to mpc831xerdb...argh, probably not without merging the non-NAND parts also...

Yep, not that easy.

Quoted 3 lines

Review

Quoted 1 line
(quoted diff) +1 -0
+	relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000, (gd_t *)gd,

use CONFIG_SYS_NAND_U_BOOT_RELOC_SP

Done.

Quoted 8 lines

meanwhile, 8315 NAND boot doesn't build when applied to u-boot's next branch:

Configuring for MPC8315ERDB board...
sdram.o: In function `fixed_sdram':
/home/r1aaha/git/u-boot/nand_spl/board/freescale/mpc8313erdb/sdram.c:72: undefined reference to `udelay'

perhaps due to some confusion with setting CONFIG_SYS_RAMBOOT?

This is due commit 3eb90bad651fab39cffba750ec4421a9c01d60e7 ("Generic udelay() with watchdog support"). SPL code doesn't use lib_generic/time.c, so nowadays we should use __udelay().

The commit above converted MPC8313ERDB boards, but didn't do the same for 8315 (there was no need since 8315 didn't use SPL at that time).

Thanks!

 MAKEALL                                   |    1 +
 Makefile                                  |    6 ++-
 board/freescale/mpc8315erdb/config.mk     |    8 +++
 board/freescale/mpc8315erdb/mpc8315erdb.c |   42 +++++++++++++
 board/freescale/mpc8315erdb/sdram.c       |    9 +++-
 doc/README.mpc8315erdb                    |   24 +++++++-
 include/configs/MPC8315ERDB.h             |   96 +++++++++++++++++++++++------
 7 files changed, 163 insertions(+), 23 deletions(-)
MAKEALL +1 -0
index ab1bb6f..1b78778 100755
@@ -362,6 +362,7 @@ LIST_83xx="		\
 	MPC8313ERDB_33	\
 	MPC8313ERDB_NAND_66	\
 	MPC8315ERDB	\
+	MPC8315ERDB_NAND	\
 	MPC8323ERDB	\
 	MPC832XEMDS	\
 	MPC832XEMDS_ATM	\
Makefile +5 -1
index 75b2c1e..8ffaa1e 100644
@@ -2294,8 +2294,12 @@ MPC8313ERDB_NAND_66_config: unconfig
 		echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
 	fi ;
 
+MPC8315ERDB_NAND_config \
 MPC8315ERDB_config: unconfig
-	@$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
+	@if [ "$(findstring _NAND_,$@)" ] ; then \
+		ln -sf mpc8313erdb nand_spl/board/freescale/mpc8315erdb ; \
+	fi ;
+	@$(MKCONFIG) -t $(@:_config=) MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
 
 MPC8323ERDB_config:	unconfig
 	@$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale
board/freescale/mpc8315erdb/config.mk +8 -0
index f768264..bf972fb 100644
@@ -1 +1,9 @@
+ifndef NAND_SPL
+ifeq ($(CONFIG_MK_NAND), y)
+TEXT_BASE = $(CONFIG_RAMBOOT_TEXT_BASE)
+endif
+endif
+
+ifndef TEXT_BASE
 TEXT_BASE = 0xFE000000
+endif
board/freescale/mpc8315erdb/mpc8315erdb.c +42 -0

57 lines not on this page · raw message

board/freescale/mpc8315erdb/sdram.c +8 -1
index ead7b1e..fe8ec1e 100644
@@ -54,6 +54,7 @@ static void resume_from_sleep(void)
  * This is useful for faster booting in configs where the RAM is unlikely
  * to be changed, or for things like NAND booting where space is tight.
  */
+#ifndef CONFIG_SYS_RAMBOOT
 static long fixed_sdram(void)
 {
 	volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;

@@ -68,7 +69,7 @@ static long fixed_sdram(void)
 	 * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg],
 	 * or the DDR2 controller may fail to initialize correctly.
 	 */
-	udelay(50000);
+	__udelay(50000);
 
 	im->ddr.csbnds[0].csbnds = (msize - 1) >> 24;
 	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;

@@ -100,6 +101,12 @@ static long fixed_sdram(void)
 
 	return msize;
 }
+#else
+static long fixed_sdram(void)
+{
+	return CONFIG_SYS_DDR_SIZE * 1024 * 1024;
+}
+#endif /* CONFIG_SYS_RAMBOOT */
 
 phys_size_t initdram(int board_type)
 {
doc/README.mpc8315erdb +22 -2
index 7d476d0..99e2d08 100644
@@ -74,7 +74,27 @@ Freescale MPC8315ERDB Board
 	or
 	=>run ramboot
 
-6	Notes
+6.	Booting from NAND flash
+
+6.1	Build U-Boot
+
+	The steps are the same as described in section "4.", but
+	MPC8315ERDB_NAND_config should be used instead of
+	MPC8315ERDB_config.
+
+6.2	Reflash NAND U-Boot Image using U-Boot
+
+	tftp 100000 u-boot-nand.bin
+	nand erase 0 80000
+	nand write 100000 0 80000
+
+	(The actual U-Boot size might be less than 0x80000, but you
+	cannot write non-page aligned data into NAND flash).
+
+6.3	?onfigure the board to boot from NAND Flash
+
+	Set S4.4 switch to ON position and S3.4 switch to OFF position.
+
+7	Notes
 
-	Booting from NAND flash is not yet supported.
 	The console baudrate for MPC8315ERDB is 115200bps.
include/configs/MPC8315ERDB.h +77 -19

186 lines not on this page · raw message

Signature · 1 line
1.6.3.3
Applied
#5 lore raw

PATCH v2 1/1 mpc83xx: Add NAND boot support for MPC8315E-RDB boards

In reply to Anton Vorontsov
Quoted 24 lines · On Tue, 24 Nov 2009 20:12:12 +0300 Anton Vorontsov <[email protected]>…

The core support for NAND booting is there already, so this patch is pretty straightforward.

There is one trick though: top level Makefile expects nand_spl to be in nand_spl/board/$(BOARDDIR), but we can fully reuse the code from mpc8313erdb boards, and so to not duplicate the code we just symlink nand_spl/board/freescale/mpc8315erdb to mpc8313erdb.

Signed-off-by Anton Vorontsov <[email protected]>

---

On Thu, Nov 19, 2009 at 01:17:36PM -0600, Kumar Gala wrote:
[...]

Quoted 6 lines

Review

Quoted 4 lines
	@$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
(quoted diff) +3 -0
+	@if [ "$(findstring _NAND_,$@)" ] ; then \
+		echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
+	fi ;

Use the new -t option to mkconfig.

Thanks for the hint.

Here is the updated patch.

Quoted 7 lines
 MAKEALL                                   |    1 +
 Makefile                                  |    6 ++-
 board/freescale/mpc8315erdb/config.mk     |    8 +++
 board/freescale/mpc8315erdb/mpc8315erdb.c |   42 +++++++++++++
 board/freescale/mpc8315erdb/sdram.c       |    7 ++
 include/configs/MPC8315ERDB.h             |   95 +++++++++++++++++++++++------
 6 files changed, 139 insertions(+), 20 deletions(-)

applied, with the below fixes merged into the same commit.

Thanks,

Kim

author
#6 lore raw

PATCH v2 1/1 mpc83xx: Add NAND boot support for MPC8315E-RDB boards

On Thu, Jan 07, 2010 at 06:53:00PM -0600, Kim Phillips wrote:
[...]

Quoted 6 lines

applied, with the below fixes merged into the same commit.

Thanks,

Kim

Quoted 8 lines
Quoted 1 line

From 792e1ba837c2ce6a77323a92aad57dab758ba042 Mon Sep 17 00:00:00 2001

From: Kim Phillips <[email protected]>
Date: Thu, 7 Jan 2010 15:44:18 -0600
Subject: [PATCH] mpc83xx: minor 8315 nand boot fixes

o silence make during ln echo
o update documentation
o and avoid:

Hm.. strange, you didn't receive v3 of this patch? In v3 I fixed all the issues as well:

http://lists.denx.de/pipermail/u-boot/2009-December/065435.html

Just FYI...

Thanks!

Signature · 3 lines
Anton Vorontsov
email: cbouatmailru at gmail.com
irc://irc.freenode.net/bd2
#7 lore raw

PATCH v2 1/1 mpc83xx: Add NAND boot support for MPC8315E-RDB boards

Quoted 2 lines · On Mon, 11 Jan 2010 14:04:17 +0300 Anton Vorontsov <[email protected]>…

Hm.. strange, you didn't receive v3 of this patch? In v3 I fixed all the issues as well:

argh, you're right, I missed that one! Too much email, man...

I'll add the trivial ...RELOC_SP definition after WD pulls the current u-boot-mpc83xx tree - but as far as the documentation goes, I'll keep the version already on the tree, if you don't mind - I consider it better and without any lack of data from the v3 patch version :P

Kim