i2c adapter scan device issue
Hi,
I have a confused problem as follows:
I instantiate a i2c device with function i2c_register_board_info(); This function pre-declare the I2C devices which live on this bus and the call of it
is before the real i2c bus driver loaded.
In i2c_register_board_info(),__i2c_first_dynamic_bus_num = busnum +1;
My i2c bus driver use i2c_add_adapter() to register adapter, In i2c_add_adapter(),
res = idr_get_new_above(&i2c_adapter_idr, adapter,
__i2c_first_dynamic_bus_num , &id);
adapter->nr = id;
That means if I pass busnum 0 to i2c_register_board_info(), but my i2c adapter will get
busnum 1 and so it can't scan pre-declared i2c devices.
In fact, I only have one i2c adapter.
It seems I can't use i2c_add_adapter(), instead of using i2c_add_numbered_adapter, right?
Best Regards,
Lanttor
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 19 lines · Lanttor
Hi,
I have a confused problem as follows:
I instantiate a i2c device with function
i2c_register_board_info(); This function pre-declare the I2C devices which live on this bus and the call of it
is before the real i2c bus driver loaded.In
i2c_register_board_info(),__i2c_first_dynamic_bus_num= busnum +1;My i2c bus driver use
i2c_add_adapter()to register adapter, Ini2c_add_adapter(),
res = idr_get_new_above(&i2c_adapter_idr, adapter,__i2c_first_dynamic_bus_num , &id);
adapter->nr= id;
Quoted 7 lines
That means if I pass busnum 0 to
i2c_register_board_info(), but my i2c adapter will get
busnum 1 and so it can't scan pre-declared i2c devices.
In fact, I only have one i2c adapter.It seems I can't use
i2c_add_adapter(), instead of usingi2c_add_numbered_adapter, right?
Yes, you are correct. You can't predefine I2C devices with i2c_register_board_info() if you don't also set I2C adapter numbers with i2c_add_numbered_adapter(). Trying would be equivalent to sending a letter to someone when you know the city and street number but not the street name: unlikely to succeed.
Signature · 1 line
Jean Delvare
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 7 lines
Yes, you are correct. You can't predefine I2C devices with
i2c_register_board_info()if you don't also set I2C adapter numbers withi2c_add_numbered_adapter(). Trying would be equivalent to sending a letter to someone when you know the city and street number but not the street name: unlikely to succeed.
Thanks Jean.
In fact my bus driver used i2c_add_adapter() not i2c_add_numbered_adapter(). Now I use i2c_add_numbered_adapter() to replace 2c_add_adapter() and set the bus number first.
In one word, you mean that i2c_add_adapter() can not work normally if useing i2c_register_board_info() to pre-declare the i2c device, right? I really need track i2c-stack in detail.
Best Regards,
Lanttor
------------------------------------------------------------------------
*From:* Jean Delvare <[email protected]> *Sent:* 11/25/2009 4:12:18 PM +0800
*To:* Lanttor <[email protected]> *CC:* [email protected] *Subject:* i2c adapter scan device issue
Quoted 37 lines · Lanttor
Quoted 20 lines
Hi,
I have a confused problem as follows:
I instantiate a i2c device with function
i2c_register_board_info(); This function pre-declare the I2C devices which live on this bus and the call of it
is before the real i2c bus driver loaded.In
i2c_register_board_info(),__i2c_first_dynamic_bus_num= busnum +1;My i2c bus driver use
i2c_add_adapter()to register adapter, Ini2c_add_adapter(),
res = idr_get_new_above(&i2c_adapter_idr, adapter,__i2c_first_dynamic_bus_num , &id);
adapter->nr= id;Quoted 8 lines
That means if I pass busnum 0 to
i2c_register_board_info(), but my i2c adapter will get
busnum 1 and so it can't scan pre-declared i2c devices.
In fact, I only have one i2c adapter.It seems I can't use
i2c_add_adapter(), instead of usingi2c_add_numbered_adapter, right?Yes, you are correct. You can't predefine I2C devices with
i2c_register_board_info()if you don't also set I2C adapter numbers withi2c_add_numbered_adapter(). Trying would be equivalent to sending a letter to someone when you know the city and street number but not the street name: unlikely to succeed.
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 7 lines · Lanttor
Quoted 7 lines
Yes, you are correct. You can't predefine I2C devices with
i2c_register_board_info()if you don't also set I2C adapter numbers withi2c_add_numbered_adapter(). Trying would be equivalent to sending a letter to someone when you know the city and street number but not the street name: unlikely to succeed.
Quoted 8 lines
Thanks Jean.
In fact my bus driver used
i2c_add_adapter()noti2c_add_numbered_adapter(). Now I usei2c_add_numbered_adapter()to replace 2c_add_adapter() and set the bus number first.In one word, you mean that
i2c_add_adapter()can not work normally if useingi2c_register_board_info()to pre-declare the i2c device, right?
Yes, exactly.
Quoted 1 line
I really need track i2c-stack in detail.
Signature · 2 lines
Jean Delvare http://khali.linux-fr.org/wishlist.html