mmc: A few trivial changes for tmio-mmc
Subsystems (3)
cover mmc: A few trivial changes for tmio-mmc
mmc: A few trivial changes for tmio-mmc
[PATCH 01/03] mmc: Let tmio-mmc use dev_name() with request_irq() [PATCH 02/03] mmc: Remove const from tmio-mmc platform data V2 [PATCH 03/03] mmc: Balance tmio-mmc cell enable()/disable() calls
These patches contain a few trivial changes for the tmio-mmc driver. Nothing out of the ordinary. Tested together with the sh_mobile_sdhi mfd driver on a sh7724 Ecovec board.
---
drivers/mmc/host/tmio_mmc.c | 12 +++++++++--- include/linux/mfd/tmio.h | 2 +- 2 files changed, 10 insertions(+), 4 deletions(-)
PATCH 1/3 mmc: Let tmio-mmc use dev_name() with request_irq()
From: Magnus Damm <[email protected]>
This change improves the /proc/interrupts output so the irq number can be mapped to platform device on boards with multiple tmio_mmc instances.
---
drivers/mmc/host/tmio_mmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/mmc/host/tmio_mmc.c +1 -1
@@ -582,7 +582,7 @@ static int __devinit tmio_mmc_probe(strudisable_mmc_irqs (host,TMIO_MASK_ALL ); ret =request_irq (host->irq, tmio_mmc_irq,IRQF_DISABLED | -IRQF_TRIGGER_FALLING ,"tmio-mmc" , host); +IRQF_TRIGGER_FALLING ,dev_name (&dev->dev), host);if (ret) goto unmap_ctl;
PATCH 2/3 mmc: Remove const from tmio-mmc platform data V2
In reply to Magnus DammFrom: Magnus Damm <[email protected]>
This patch removes the const from the tmio-mmc
platform data parameter "hclk". Needed by the
SDHI driver.
---
V2 drops the SDHI bits to simplify merging.
include/linux/mfd/tmio.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/linux/mfd/tmio.h +1 -1
@@ -60,7 +60,7 @@ void tmio_core_set_bus_shift(int bus_shi* data for the MMC controller */ struct tmio_mmc_data { -const unsigned int hclk; +unsigned int hclk;void (*set_pwr)(struct platform_device *host,int state);void (*set_no_clk_div)(struct platform_device *host,int state); };
PATCH 3/3 mmc: Balance tmio-mmc cell enable()/disable() calls
In reply to Magnus DammFrom: Magnus Damm <[email protected]>
This patch adds cell->disable() calls to the tmio-mmc probe() error handling and the remove() function.
---
drivers/mmc/host/tmio_mmc.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/mmc/host/tmio_mmc.c +8 -2
@@ -577,14 +577,14 @@ static int __devinit tmio_mmc_probe(struif (ret >=0 ) host->irq = ret;else - goto unmap_ctl; + goto cell_disable;disable_mmc_irqs (host,TMIO_MASK_ALL ); ret =request_irq (host->irq, tmio_mmc_irq,IRQF_DISABLED |IRQF_TRIGGER_FALLING ,dev_name (&dev->dev), host);if (ret) - goto unmap_ctl; + goto cell_disable;mmc_add_host (mmc);
@@ -596,6 +596,9 @@ static int __devinit tmio_mmc_probe(strureturn 0 ; +cell_disable: +if (cell->disable) + cell->disable (dev); unmap_ctl:iounmap (host->ctl); host_free:
@@ -606,6 +609,7 @@ out: static int __devexit tmio_mmc_remove(struct platform_device *dev) { +struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;struct mmc_host *mmc =platform_get_drvdata (dev);platform_set_drvdata (dev,NULL );
@@ -614,6 +618,8 @@ static int __devexit tmio_mmc_remove(strstruct tmio_mmc_host *host =mmc_priv (mmc);mmc_remove_host (mmc);free_irq (host->irq, host); +if (cell->disable) + cell->disable (dev);iounmap (host->ctl);mmc_free_host (mmc); }
Re: [PATCH 03/03] mmc: Balance tmio-mmc cell enable()/disable() calls
Quoted 5 lines · On Fri, 27 Nov 2009 14:00:22 +0900 Magnus Damm <[email protected]> wrote:
From: Magnus Damm <[email protected]>
This patch adds
cell->disable()calls to the tmio-mmcprobe()error handling and theremove()function.
This patch still doesn't apply due to linux-next changes which never got merged into 2.6.33-rcX.
If you think it should go into 2.6.33 then please redo a patch against mainline and we'll cheerily trash the problematic stuff in linux-next.
Re: [PATCH 03/03] mmc: Balance tmio-mmc cell enable()/disable() calls
Quoted 11 lines · Andrew Morton
Quoted 5 lines · On Fri, 27 Nov 2009 14:00:22 +0900 Magnus Damm <[email protected]> wrote:
From: Magnus Damm <[email protected]>
This patch adds
cell->disable()calls to the tmio-mmcprobe()error handling and theremove()function.This patch still doesn't apply due to linux-next changes which never got merged into 2.6.33-rcX.
Good news is that the linux-next issue seems solved now thanks to help from Samuel Ortiz.
Quoted 2 lines
If you think it should go into 2.6.33 then please redo a patch against mainline and we'll cheerily trash the problematic stuff in linux-next.
Nah, this patch is not urgent. It may also break other platforms, so I prefer to resend it later.
Thanks,
/ magnus