powerpc/ipic: support external edge triggered IRQ0
PATCH 1/1 powerpc/ipic: support external edge triggered IRQ0
Currently an external edge triggered IRQ0 gives 2 problems.
It gives a sense error ("edge sense not supported on internal interrupts") and it isn't acked.
This patch takes into account IRQ0 can be internal or external and fixes both issues.
Signed-off-by Norbert van Bolhuis <[email protected]>
--- arch/powerpc/sysdev/ipic.c | 5 ++++- 1 files changed, 4 insertions(+), 1 deletions(-)
arch/powerpc/sysdev/ipic.c +4 -1
@@ -316,6 +316,7 @@ static struct ipic_info ipic_info[] = { .prio_mask = 7, }, [48] = { + .ack = IPIC_SEPNR, .mask = IPIC_SEMSR, .prio = IPIC_SMPRR_A, .force = IPIC_SEFCR,
@@ -619,7 +620,9 @@ static int ipic_set_irq_type(unsigned int virq, unsigned int flow_type)return -EINVAL ; }/* ipic supports only edge mode on external interrupts */ -if ((flow_type &IRQ_TYPE_EDGE_FALLING ) && !ipic_info[src].ack) { +if ((flow_type &IRQ_TYPE_EDGE_FALLING ) && + ((src !=IPIC_IRQ_EXT0 && !ipic_info[src].ack) || + (src ==IPIC_IRQ_EXT0 && (ipic_read (ipic->regs,IPIC_SEMSR ) &SEMSR_SIRQ0 )))) {printk (KERN_ERR "ipic: edge sense not supported on internal " "interrupts\n" );return -EINVAL ;
Signature · 1 line
1.5.2.2