Skip to contentSkip to conversation

pci=off

DISCUSSION werner 4 participants 4 messages Nov 29, 2009 – Nov 30, 2009

lore
Share & tools
lore

werner

author
#0 lore raw

"werner" <[email protected]>
In the last time, more and more laptops have problems to boot with Linux.

The most frequent problem is that IDE drives are not found, or cannot be accessed because reclaimed as ocupied.
The only mean to access them and to get it booted, is
with pci=off. However, with this, the system becomes almost unuseable, lspci also shows nothing. ITS NECESSARY THAT SOMEONE MAKE A KERNEL PARAMETER pci=noide , so that all hardware is registered, with exception of ide (and sata) drives !!!! This problem, for example, also happens on IBM/Lenovo Thinkpad laptops.

A Toshibe Satelite laptop, I need go back to kernel 2.6.23 . With later kernels, at the beginning of the boot the screen become black and nothing more happened. The same happens on that laptop with all newer Slackware kernels

W.Landgraf
---
Professional hosting for everyone - http://www.host.ru

#1 lore raw
Quoted 8 lines · werner

"werner" <[email protected]>
In the last time, more and more laptops have problems to boot with Linux.

The most frequent problem is that IDE drives are not found, or cannot be accessed because reclaimed as ocupied.
The only mean to access them and to get it booted, is
with pci=off.

I'm not sure it is not.

Quoted 6 lines

However, with this, the system becomes
almost unuseable, lspci also shows nothing. ITS
NECESSARY THAT SOMEONE MAKE A KERNEL PARAMETER pci=noide , so that all hardware is registered, with exception of
ide (and sata) drives !!!! This problem, for example,
also happens on IBM/Lenovo Thinkpad laptops.

No, it doesn't.

Quoted 4 lines

A Toshibe Satelite laptop, I need go back to kernel 2.6.23 . With later kernels, at the beginning of the boot the screen become black and nothing more happened. The same happens on that laptop with all newer Slackware kernels

Care to send .config from your kernel?

Rafael

#2 lore raw
In reply to werner
Quoted 2 lines

The most frequent problem is that IDE drives are not found, or cannot be accessed because reclaimed as ocupied.

Some detailed diagnostic information would be useful.

Quoted 2 lines

screen become black and nothing more happened. The same happens on that laptop with all newer Slackware kernels

First reporting point for distro kernels is the distribution. Do modern non-Slackware kernels (eg Fedora, SuSE) work on the problem laptop ?

#3 lore raw
In reply to werner
Quoted 4 lines · On Sun, 29 Nov 2009 16:52:50 -0400 "werner" <[email protected]> wrote:

"werner" <[email protected]>
In the last time, more and more laptops have problems to boot with Linux.

Quoted 9 lines

The most frequent problem is that IDE drives are not found, or cannot be accessed because reclaimed as ocupied.
The only mean to access them and to get it booted, is
with pci=off. However, with this, the system becomes
almost unuseable, lspci also shows nothing. ITS
NECESSARY THAT SOMEONE MAKE A KERNEL PARAMETER pci=noide , so that all hardware is registered, with exception of
ide (and sata) drives !!!! This problem, for example,
also happens on IBM/Lenovo Thinkpad laptops.

i run on thinkpad r61 . i have experienced no problems. what specific model are you running into trouble and with what specific kernel-configuration?

maybe this helps: http://tuxmobil.org/ibm.html

Quoted 5 lines

A Toshibe Satelite laptop, I need go back to kernel 2.6.23 . With later kernels, at the beginning of the boot the screen become black and nothing more happened. The same happens on that laptop with all newer Slackware kernels

did you try any recent fedora/ubuntu/debian live-dvds? this is normally the easiest way to check if there is a real problem or if it is only a kernel-configuration issue.

cheers,
flo