Skip to contentSkip to conversation

hwmon: (adt7475) Add support for the

PATCH In review Jean Delvare 1 participant 1 message Dec 2, 2009

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 9/11 hwmon: (adt7475) Add support for the

Add support for the Analog Devices ADT7476 chip. This chip is largely compatible with the ADT7473 and ADT7475, with additional features. In particular, it has 5 voltage inputs instead of 2, and VID input pins.

Cc Hans de Goede <[email protected]>
Cc Jordan Crouse <[email protected]>
Cc "Darrick J. Wong" <[email protected]>
---
 Documentation/hwmon/adt7475 |   20 ++++++++--
 drivers/hwmon/Kconfig       |    5 +-
 drivers/hwmon/adt7475.c     |   80 +++++++++++++++++++++++++++++++++----------
 3 files changed, 80 insertions(+), 25 deletions(-)
Documentation/hwmon/adt7475 +15 -5
@@ -10,6 +10,10 @@ Supported chips:
     Prefix: 'adt7475'
     Addresses scanned: I2C 0x2E
     Datasheet: Publicly available at the On Semiconductors website
+  * Analog Devices ADT7476
+    Prefix: 'adt7476'
+    Addresses scanned: I2C 0x2C, 0x2D, 0x2E
+    Datasheet: Publicly available at the On Semiconductors website
   * Analog Devices ADT7490
     Prefix: 'adt7490'
     Addresses scanned: I2C 0x2C, 0x2D, 0x2E
@@ -25,11 +29,13 @@ Authors:
 Description
 -----------
 
-This driver implements support for the Analog Devices ADT7473, ADT7475 and
-ADT7490 chip family. The ADT7473 and ADT7475 differ only in minor details.
-The ADT7490 has additional features, including extra voltage measurement
-inputs and PECI support. All the supported chips will be collectively
-designed by the name "ADT747x" in the rest of this document.
+This driver implements support for the Analog Devices ADT7473, ADT7475,
+ADT7476 and ADT7490 chip family. The ADT7473 and ADT7475 differ only in
+minor details. The ADT7476 has additional features, including extra voltage
+measurement inputs and VID support. The ADT7490 also has additional
+features, including extra voltage measurement inputs and PECI support. All
+the supported chips will be collectively designed by the name "ADT747x" in
+the rest of this document.
 
 The ADT747x uses the 2-wire interface compatible with the SMBus 2.0
 specification. Using an analog to digital converter it measures three (3)
@@ -62,6 +68,10 @@ ADT7473:
 ADT7475:
   * 2 voltage inputs
 
+ADT7476:
+  * 5 voltage inputs
+  * VID support (not implemented)
+
 ADT7490:
   * 6 voltage inputs
   * 1 Imon input (not implemented)
drivers/hwmon/Kconfig +3 -2
@@ -205,11 +205,12 @@ config SENSORS_ADT7473
 	  will be called adt7473.
 
 config SENSORS_ADT7475
-	tristate "Analog Devices ADT7473, ADT7475 and ADT7490"
+	tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
 	depends on I2C && EXPERIMENTAL
 	help
 	  If you say yes here you get support for the Analog Devices
-	  ADT7473, ADT7475 and ADT7490 hardware monitoring chips.
+	  ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
+	  chips.
 
 	  This driver can also be build as a module.  If so, the module
 	  will be called adt7475.
drivers/hwmon/adt7475.c +62 -18

195 lines not on this page · raw message

Signature · 6 lines
Jean Delvare

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors