Skip to contentSkip to conversation

hwmon: (adt7475) Add VID support for the

PATCH In review Jean Delvare 1 participant 1 message Dec 2, 2009

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 11/11 hwmon: (adt7475) Add VID support for the

The ADT7476 has 5 dedicated pins for VID input, and the +12V input can optionally be used as a 6th VID pin. Add support for VID input.

Cc Hans de Goede <[email protected]>
Cc Jordan Crouse <[email protected]>
Cc "Darrick J. Wong" <[email protected]>
---
 Documentation/hwmon/adt7475 |    2 -
 drivers/hwmon/Kconfig       |    1 
 drivers/hwmon/adt7475.c     |   66 +++++++++++++++++++++++++++++++++++++++++--
 3 files changed, 65 insertions(+), 4 deletions(-)
Documentation/hwmon/adt7475 +1 -1
@@ -70,7 +70,7 @@ ADT7475:
 
 ADT7476:
   * 5 voltage inputs
-  * VID support (not implemented)
+  * VID support
 
 ADT7490:
   * 6 voltage inputs
drivers/hwmon/Kconfig +1 -0
@@ -207,6 +207,7 @@ config SENSORS_ADT7473
 config SENSORS_ADT7475
 	tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
 	depends on I2C && EXPERIMENTAL
+	select HWMON_VID
 	help
 	  If you say yes here you get support for the Analog Devices
 	  ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
drivers/hwmon/adt7475.c +63 -3

151 lines not on this page · raw message

Signature · 6 lines
Jean Delvare

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors