Skip to contentSkip to conversation

powerpc: Reduce 64bit vmlinux by making acenic and cramfs modules

PATCH In review Anton Blanchard 3 participants 10 messages Dec 7, 2009 – Feb 7, 2010 PowerPC

lore
Share & tools
lore
#0 lore raw

PATCH 1/4 powerpc: Reduce 64bit vmlinux by making acenic and cramfs modules

Machines with acenic adapters are rare these days, so we may as well make it a module. Cramfs is also very rarely used so we can make it a module.

Together this saves 143kB on a 64bit compile:

text data bss dec hex filename
8247176 1729404 1221988 11198568 aae068 vmlinux~
8134997 1727588 1188836 11051421 a8a19d vmlinux

---

arch/powerpc/configs/g5_defconfig +1 -1
Index: linux.trees.git/arch/powerpc/configs/g5_defconfig
===================================================================
@@ -757,7 +757,7 @@ CONFIG_SUNGEM=y
 # CONFIG_B44 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
-CONFIG_ACENIC=y
+CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
arch/powerpc/configs/ppc64_defconfig +2 -2
Index: linux.trees.git/arch/powerpc/configs/ppc64_defconfig
===================================================================
@@ -980,7 +980,7 @@ CONFIG_E100=y
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
-CONFIG_ACENIC=y
+CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
@@ -1863,7 +1863,7 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=y
+CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
arch/powerpc/configs/pseries_defconfig +2 -2
Index: linux.trees.git/arch/powerpc/configs/pseries_defconfig
===================================================================
@@ -796,7 +796,7 @@ CONFIG_E100=y
 # CONFIG_NET_POCKET is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
-CONFIG_ACENIC=y
+CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
@@ -1494,7 +1494,7 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=y
+CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
#1 lore raw

PATCH 2/4 powerpc: Disable token ring in powerpc defconfigs

Token what? Lets save some space in our powerpc kernels and remove token ring support.

---

arch/powerpc/configs/g5_defconfig +2 -2
Index: linux.trees.git/arch/powerpc/configs/g5_defconfig
===================================================================
@@ -794,8 +794,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
-CONFIG_TR=y
-CONFIG_IBMOL=y
+# CONFIG_TR is not set
+# CONFIG_IBMOL is not set
 # CONFIG_3C359 is not set
 # CONFIG_TMS380TR is not set
 
arch/powerpc/configs/iseries_defconfig +2 -2
Index: linux.trees.git/arch/powerpc/configs/iseries_defconfig
===================================================================
@@ -714,8 +714,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
-CONFIG_TR=y
-CONFIG_IBMOL=y
+# CONFIG_TR is not set
+# CONFIG_IBMOL is not set
 # CONFIG_3C359 is not set
 # CONFIG_TMS380TR is not set
 
arch/powerpc/configs/ppc64_defconfig +2 -2
Index: linux.trees.git/arch/powerpc/configs/ppc64_defconfig
===================================================================
@@ -1023,8 +1023,8 @@ CONFIG_PASEMI_MAC=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
-CONFIG_TR=y
-CONFIG_IBMOL=y
+# CONFIG_TR is not set
+# CONFIG_IBMOL is not set
 # CONFIG_3C359 is not set
 # CONFIG_TMS380TR is not set
 
arch/powerpc/configs/ppc64e_defconfig +2 -2
Index: linux.trees.git/arch/powerpc/configs/ppc64e_defconfig
===================================================================
@@ -1008,8 +1008,8 @@ CONFIG_IXGB=m
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
-CONFIG_TR=y
-CONFIG_IBMOL=y
+# CONFIG_TR is not set
+# CONFIG_IBMOL is not set
 # CONFIG_3C359 is not set
 # CONFIG_TMS380TR is not set
 CONFIG_WLAN=y
arch/powerpc/configs/pseries_defconfig +2 -2
Index: linux.trees.git/arch/powerpc/configs/pseries_defconfig
===================================================================
@@ -834,8 +834,8 @@ CONFIG_S2IO=m
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
-CONFIG_TR=y
-CONFIG_IBMOL=y
+# CONFIG_TR is not set
+# CONFIG_IBMOL is not set
 # CONFIG_3C359 is not set
 # CONFIG_TMS380TR is not set
 
#2 lore raw

PATCH 3/4 powerpc: Reduce differences between pseries and ppc64 defconfigs

The pseries and ppc64 defconfigs have drifted apart over the years. Reduce some of the differences while still keeping the idea that the ppc64 defconfig is cross platform but enables fewer features than pseries, eg:

- NR_CPUS is lower
- No NUMA support

Also enable a number of common adapters as modules.

---

arch/powerpc/configs/ppc64_defconfig +39 -29
Index: linux.trees.git/arch/powerpc/configs/ppc64_defconfig
===================================================================
@@ -137,8 +137,9 @@ CONFIG_TRACEPOINTS=y
 CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
+CONFIG_KPROBES=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_KRETPROBES=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
@@ -191,6 +192,7 @@ CONFIG_SCANLOG=m
 CONFIG_LPARCFG=y
 CONFIG_PPC_SMLPAR=y
 CONFIG_CMM=y
+CONFIG_DTL=y
 CONFIG_PPC_ISERIES=y
 
 #
@@ -358,7 +360,7 @@ CONFIG_ARCH_MEMORY_PROBE=y
 CONFIG_PPC_HAS_HASH_64K=y
 # CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=13
-# CONFIG_SCHED_SMT is not set
+CONFIG_SCHED_SMT=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 CONFIG_EXTRA_TARGETS=""
@@ -790,12 +792,12 @@ CONFIG_SCSI_IPR=y
 CONFIG_SCSI_IPR_TRACE=y
 CONFIG_SCSI_IPR_DUMP=y
 # CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
+CONFIG_SCSI_QLA_FC=m
 # CONFIG_SCSI_QLA_ISCSI is not set
 CONFIG_SCSI_LPFC=m
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
-CONFIG_SCSI_DEBUG=m
+# CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
@@ -867,9 +869,8 @@ CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=y
-CONFIG_MD_RAID456=y
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=y
@@ -984,7 +985,7 @@ CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000E is not set
+CONFIG_E1000E=m
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -1006,19 +1007,19 @@ CONFIG_GELIC_WIRELESS=y
 # CONFIG_ATL1E is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T3=m
 CONFIG_EHEA=m
 # CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
+CONFIG_IXGBE=m
 CONFIG_IXGB=m
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
+CONFIG_S2IO=m
+CONFIG_MYRI10GE=m
+CONFIG_NETXEN_NIC=m
 # CONFIG_NIU is not set
 CONFIG_PASEMI_MAC=y
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
@@ -1169,7 +1170,7 @@ CONFIG_SERIAL_TXX9=y
 CONFIG_HAS_TXX9_SERIAL=y
 CONFIG_SERIAL_TXX9_NR_UARTS=6
 CONFIG_SERIAL_TXX9_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_JSM=m
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
@@ -1586,7 +1587,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
+CONFIG_USB_MON=m
 # CONFIG_USB_WUSB is not set
 # CONFIG_USB_WUSB_CBAF is not set
 
@@ -1686,21 +1687,22 @@ CONFIG_USB_APPLEDISPLAY=m
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 CONFIG_INFINIBAND=m
-# CONFIG_INFINIBAND_USER_MAD is not set
-# CONFIG_INFINIBAND_USER_ACCESS is not set
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
 CONFIG_INFINIBAND_ADDR_TRANS=y
 CONFIG_INFINIBAND_MTHCA=m
 CONFIG_INFINIBAND_MTHCA_DEBUG=y
-# CONFIG_INFINIBAND_IPATH is not set
+CONFIG_INFINIBAND_IPATH=m
 CONFIG_INFINIBAND_EHCA=m
 # CONFIG_INFINIBAND_AMSO1100 is not set
-# CONFIG_MLX4_INFINIBAND is not set
+CONFIG_MLX4_INFINIBAND=m
 # CONFIG_INFINIBAND_NES is not set
 CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_CM=y
 CONFIG_INFINIBAND_IPOIB_DEBUG=y
 # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
-# CONFIG_INFINIBAND_SRP is not set
+CONFIG_INFINIBAND_SRP=m
 CONFIG_INFINIBAND_ISER=m
 CONFIG_EDAC=y
 
@@ -1798,7 +1800,7 @@ CONFIG_REISERFS_FS=y
 CONFIG_REISERFS_FS_XATTR=y
 CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=y
+CONFIG_JFS_FS=m
 CONFIG_JFS_POSIX_ACL=y
 CONFIG_JFS_SECURITY=y
 # CONFIG_JFS_DEBUG is not set
@@ -1811,14 +1813,22 @@ CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
 # CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_STATS=y
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_NILFS2_FS=m
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -1851,7 +1861,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -2075,7 +2085,7 @@ CONFIG_XMON=y
 CONFIG_XMON_DISASSEMBLY=y
 CONFIG_DEBUGGER=y
 CONFIG_IRQSTACKS=y
-# CONFIG_VIRQ_DEBUG is not set
+CONFIG_VIRQ_DEBUG=y
 CONFIG_BOOTX_TEXT=y
 # CONFIG_PPC_EARLY_DEBUG is not set
 
arch/powerpc/configs/pseries_defconfig +33 -27

170 lines not on this page · raw message

#3 lore raw

PATCH 4/4 powerpc: Set HZ=100 on pseries and ppc64 defconfigs

Now we have high res timers there is less of a reason for a high HZ value. Furthermore I think there a few reasons we should reduce HZ to 100:

- Timer interrupt overhead. While this overhead is small, there are applications that are very sensitive to jitter (eg some HPC apps).

- Issues with the timer wheel code. When coming out of NO_HZ idle we work our way through the timer code one tick at a time. If we have been idle a long time, this adds up - I sometimes see milliseconds of time spent in that loop.

Long term we should fix the timer wheel algorithm, but for now if we reduce HZ then we reduce the amount of work the timer code has to do when coming out of idle.

---

arch/powerpc/configs/ppc64_defconfig +3 -3
Index: linux.trees.git/arch/powerpc/configs/ppc64_defconfig
===================================================================
@@ -306,11 +306,11 @@ CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
+CONFIG_HZ=100
 CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
arch/powerpc/configs/pseries_defconfig +3 -3
Index: linux.trees.git/arch/powerpc/configs/pseries_defconfig
===================================================================
@@ -231,11 +231,11 @@ CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
+CONFIG_HZ=100
 CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
#4 lore raw

Re: [PATCH 3/4] powerpc: Reduce differences between pseries and ppc64 defconfigs

In reply to Anton Blanchard
Quoted 6 lines · Anton Blanchard

The pseries and ppc64 defconfigs have drifted apart over the years. Reduce some of the differences while still keeping the idea that the ppc64 defconfig is cross platform but enables fewer features than pseries, eg:

- NR_CPUS is lower
- No NUMA support

Hmm, most of the modern 64 bit platforms are NUMA aren't they? Just a thought.

cheers

#5 lore raw

Re: [PATCH 3/4] powerpc: Reduce differences between pseries and ppc64 defconfigs

Quoted 11 lines · Michael Ellerman
Quoted 1 line

The pseries and ppc64 defconfigs have drifted apart over the years.

Reduce

Quoted 1 line

some of the differences while still keeping the idea that the ppc64

defconfig

Quoted 4 lines

is cross platform but enables fewer features than pseries, eg:

- NR_CPUS is lower
- No NUMA support

Hmm, most of the modern 64 bit platforms are NUMA aren't they? Just a thought.

Also no NUMA is going to hurt Cell too. I think we should leave that in.

Cheers,
Ben.

#6 lore raw

Re: [PATCH 3/4] powerpc: Reduce differences between pseries and ppc64 defconfigs

Quoted 7 lines · Benjamin Herrenschmidt
Quoted 6 lines · Michael Ellerman
Quoted 1 line

The pseries and ppc64 defconfigs have drifted apart over the years.

Reduce

Quoted 1 line

some of the differences while still keeping the idea that the ppc64

defconfig

Quoted 2 lines

is cross platform but enables fewer features than pseries, eg:

Quoted 7 lines
Quoted 5 lines
Quoted 2 lines

- NR_CPUS is lower
- No NUMA support

Hmm, most of the modern 64 bit platforms are NUMA aren't they? Just a thought.

Also no NUMA is going to hurt Cell too. I think we should leave that in.

It wasn't in, but maybe we should put it in.

cheers

#7 lore raw

Re: [PATCH 3/4] powerpc: Reduce differences between pseries and ppc64 defconfigs

In reply to Benjamin Herrenschmidt

Hi,

Quoted 1 line

Also no NUMA is going to hurt Cell too. I think we should leave that in.

It was never enabled in the ppc64 defconfig :) I'm happy to turn it on though.

Anton

#8 lore raw

Re: [PATCH 3/4] powerpc: Reduce differences between pseries and ppc64 defconfigs

Quoted 2 lines · Anton Blanchard

It was never enabled in the ppc64 defconfig :) I'm happy to turn it on though.

Yeah please.

Cheers,
Ben.

#9 lore raw

powerpc: Reduce differences between pseries and ppc64 defconfigs

In reply to Anton Blanchard

The pseries and ppc64 defconfigs have drifted apart over the years. Reduce some of the differences while still keeping the idea that the ppc64 defconfig is cross platform but enables fewer features than pseries, eg NR_CPUS is lower.

Also enable a number of common adapters as modules.

---

v2: Enable NUMA on ppc64_defconfig

arch/powerpc/configs/ppc64_defconfig +44 -31
Index: powerpc.git/arch/powerpc/configs/ppc64_defconfig
===================================================================
@@ -137,8 +137,9 @@ CONFIG_TRACEPOINTS=y
 CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
+CONFIG_KPROBES=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_KRETPROBES=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
@@ -191,6 +192,7 @@ CONFIG_SCANLOG=m
 CONFIG_LPARCFG=y
 CONFIG_PPC_SMLPAR=y
 CONFIG_CMM=y
+CONFIG_DTL=y
 CONFIG_PPC_ISERIES=y
 
 #
@@ -328,9 +330,10 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_KEXEC=y
 # CONFIG_PHYP_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
-# CONFIG_NUMA is not set
+CONFIG_NUMA=y
+CONFIG_NODES_SHIFT=8
+CONFIG_MAX_ACTIVE_REGIONS=256
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -339,6 +342,7 @@ CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 CONFIG_SPARSEMEM_MANUAL=y
 CONFIG_SPARSEMEM=y
+CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_EXTREME=y
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
@@ -354,11 +358,12 @@ CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_NODES_SPAN_OTHER_NODES=y
 CONFIG_ARCH_MEMORY_PROBE=y
 CONFIG_PPC_HAS_HASH_64K=y
 # CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=13
-# CONFIG_SCHED_SMT is not set
+CONFIG_SCHED_SMT=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 CONFIG_EXTRA_TARGETS=""
@@ -790,12 +795,12 @@ CONFIG_SCSI_IPR=y
 CONFIG_SCSI_IPR_TRACE=y
 CONFIG_SCSI_IPR_DUMP=y
 # CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
+CONFIG_SCSI_QLA_FC=m
 # CONFIG_SCSI_QLA_ISCSI is not set
 CONFIG_SCSI_LPFC=m
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
-CONFIG_SCSI_DEBUG=m
+# CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
@@ -867,9 +872,8 @@ CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=y
-CONFIG_MD_RAID456=y
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=y
@@ -984,7 +988,7 @@ CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000E is not set
+CONFIG_E1000E=m
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -1006,19 +1010,19 @@ CONFIG_GELIC_WIRELESS=y
 # CONFIG_ATL1E is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T3=m
 CONFIG_EHEA=m
 # CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
+CONFIG_IXGBE=m
 CONFIG_IXGB=m
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
+CONFIG_S2IO=m
+CONFIG_MYRI10GE=m
+CONFIG_NETXEN_NIC=m
 # CONFIG_NIU is not set
 CONFIG_PASEMI_MAC=y
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
@@ -1169,7 +1173,7 @@ CONFIG_SERIAL_TXX9=y
 CONFIG_HAS_TXX9_SERIAL=y
 CONFIG_SERIAL_TXX9_NR_UARTS=6
 CONFIG_SERIAL_TXX9_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_JSM=m
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
@@ -1586,7 +1590,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
+CONFIG_USB_MON=m
 # CONFIG_USB_WUSB is not set
 # CONFIG_USB_WUSB_CBAF is not set
 
@@ -1686,21 +1690,22 @@ CONFIG_USB_APPLEDISPLAY=m
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 CONFIG_INFINIBAND=m
-# CONFIG_INFINIBAND_USER_MAD is not set
-# CONFIG_INFINIBAND_USER_ACCESS is not set
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
 CONFIG_INFINIBAND_ADDR_TRANS=y
 CONFIG_INFINIBAND_MTHCA=m
 CONFIG_INFINIBAND_MTHCA_DEBUG=y
-# CONFIG_INFINIBAND_IPATH is not set
+CONFIG_INFINIBAND_IPATH=m
 CONFIG_INFINIBAND_EHCA=m
 # CONFIG_INFINIBAND_AMSO1100 is not set
-# CONFIG_MLX4_INFINIBAND is not set
+CONFIG_MLX4_INFINIBAND=m
 # CONFIG_INFINIBAND_NES is not set
 CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_CM=y
 CONFIG_INFINIBAND_IPOIB_DEBUG=y
 # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
-# CONFIG_INFINIBAND_SRP is not set
+CONFIG_INFINIBAND_SRP=m
 CONFIG_INFINIBAND_ISER=m
 CONFIG_EDAC=y
 
@@ -1798,7 +1803,7 @@ CONFIG_REISERFS_FS=y
 CONFIG_REISERFS_FS_XATTR=y
 CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=y
+CONFIG_JFS_FS=m
 CONFIG_JFS_POSIX_ACL=y
 CONFIG_JFS_SECURITY=y
 # CONFIG_JFS_DEBUG is not set
@@ -1811,14 +1816,22 @@ CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
 # CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_STATS=y
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_NILFS2_FS=m
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -1851,7 +1864,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -2075,7 +2088,7 @@ CONFIG_XMON=y
 CONFIG_XMON_DISASSEMBLY=y
 CONFIG_DEBUGGER=y
 CONFIG_IRQSTACKS=y
-# CONFIG_VIRQ_DEBUG is not set
+CONFIG_VIRQ_DEBUG=y
 CONFIG_BOOTX_TEXT=y
 # CONFIG_PPC_EARLY_DEBUG is not set
 
arch/powerpc/configs/pseries_defconfig +35 -28

179 lines not on this page · raw message