Skip to contentSkip to conversation

New DibCom based ISDB-T device

PATCH Mauro Carvalho Chehab 2 participants 5 messages Nov 17, 2009 – Dec 7, 2009 2 messages not in the archive Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Hi Patrick,

A friend of mine got a Geniatech S870 ISDB-T card. According to him, this device is based on stk8090 chipset and wants to use it in Brazil.

The board has the following USB ID:

	Bus 002 Device 002: ID 10b8:1fa0 DiBcom

I was wandering if the existing dib8000 driver will work with such device.

If so, would the following patch be enough?

Cheers,
Mauro.

---

Add support for Dibcom STK8090

linux/drivers/media/dvb/dvb-usb/dib0700_devices.c +6 -1
@@ -1950,6 +1950,7 @@ struct usb_device_id dib0700_usb_id_tabl
 	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK807XP) },
 	{ USB_DEVICE(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD) },
 	{ USB_DEVICE(USB_VID_EVOLUTEPC, USB_PID_TVWAY_PLUS) },
+	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK8090) },
 	{ 0 }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -2496,7 +2497,7 @@ struct dvb_usb_device_properties dib0700
 			},
 		},
 
-		.num_device_descs = 3,
+		.num_device_descs = 4,
 		.devices = {
 			{   "DiBcom STK807xP reference design",
 				{ &dib0700_usb_id_table[62], NULL },
@@ -2510,6 +2511,10 @@ struct dvb_usb_device_properties dib0700
 				{ &dib0700_usb_id_table[64], NULL },
 				{ NULL },
 			},
+			{   "DiBcom STK8090 reference design",
+				{ &dib0700_usb_id_table[65], NULL },
+				{ NULL },
+			},
 		},
 
 		.rc_interval      = DEFAULT_RC_INTERVAL,
linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +1 -0
@@ -100,6 +100,7 @@
 #define USB_PID_DIBCOM_STK7070PD			0x1ebe
 #define USB_PID_DIBCOM_STK807XP				0x1f90
 #define USB_PID_DIBCOM_STK807XPVR			0x1f98
+#define USB_PID_DIBCOM_STK8090				0x1fa0
 #define USB_PID_DIBCOM_ANCHOR_2135_COLD			0x2131
 #define USB_PID_DIBCOM_STK7770P				0x1e80
 #define USB_PID_DPOSH_M9206_COLD			0x9206
#1 lore raw

Hi Mauro,

Quoted 5 lines · Mauro Carvalho Chehab

Hi Patrick,

A friend of mine got a Geniatech S870 ISDB-T card. According to him, this device is based on stk8090 chipset and wants to use it in Brazil.

Quoted 7 lines

The board has the following USB ID:

	Bus 002 Device 002: ID 10b8:1fa0 DiBcom

I was wandering if the existing dib8000 driver will work with such device.

If so, would the following patch be enough?

No.

I have a preliminary patch ready to support this board, but it requires some review. If I'm informed correctly, the client (Geniatech or a subcontractor) has this patch available for testing.

I'm working on having it available for the 2.6.33 merge-window.

best regards,
--

Patrick
http://www.kernellabs.com/

#2 lore raw
Quoted 19 lines · Patrick Boettcher

Hi Mauro,

Quoted 6 lines · Mauro Carvalho Chehab

Hi Patrick,

A friend of mine got a Geniatech S870 ISDB-T card. According to him, this device is based
on stk8090 chipset and wants to use it in Brazil.

Quoted 8 lines

The board has the following USB ID:

    Bus 002 Device 002: ID 10b8:1fa0 DiBcom

I was wandering if the existing dib8000 driver will work with such device.

If so, would the following patch be enough?

Quoted 7 lines

No.

I have a preliminary patch ready to support this board, but it requires some review. If I'm informed correctly, the client (Geniatech or a subcontractor) has this patch available for testing.

I'm working on having it available for the 2.6.33 merge-window.

Ok, thanks.

Cheers,
Mauro.

A message that is not in the archive (sent off-list or not yet received): [email protected]

#4 lore raw

Hi Marcelo,

Quoted 12 lines · Marcelo Blanes

Dear Mauro and Patrick,

This log may help you. It appears when I insert the usb tv stick tunner into one of my usb interfaces:

[  759.573180] usb 8-1: new high speed USB device using ehci_hcd and address 4 [  759.714026] usb 8-1: configuration #1 chosen from 1 choice
[  759.717155] usb 8-1: New USB device found, idVendor=10b8, idProduct=1fa0 [  759.717155] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [  759.717155] usb 8-1: Product: STK8096GP
[  759.717155] usb 8-1: Manufacturer: DiBcom
[  759.717155] usb 8-1: SerialNumber: 1

Quoted 1 line

Also a more detail information using lsusb -D

Can you please test your device using the driver from here:

http://linuxtv.org/hg/~pb/v4l-dvb/

?

thanks,

--

Patrick
http://www.kernellabs.com/

A message that is not in the archive (sent off-list or not yet received): [email protected]

#6 lore raw
Quoted 4 lines · On Monday 07 December 2009 21:25:25 Marcelo Blanes wrote:

Hi Patrick,

Ok I can test. Should I replace only the file dib8000.c or update the
entire linuxtv project?

Yes, please use the v4l-dvb repository from

http://linuxtv.org/hg/~pb/v4l-dvb/

not only the dib8000.c

PS: Please, don't chop off mailing lists when replying to a message received by one, You never know if someone else is following and this one may have the same questions as you.

Signature · 2 lines
Patrick 
http://www.kernellabs.com/