Skip to contentSkip to conversation

x86: ucode-amd: Convert printk(KERN_*...) to pr_*(...)

PATCH In review Joe Perches 2 participants 18 messages Dec 8, 2009 – Dec 10, 2009 1 message not in the archive

Subsystems (5)
x86 KVM x86 x86 MM Checkpatch +1 more subsystems
lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

Joe Perches

author maintainer
#1 lore raw

arch/x86/kernel/microcode_amd.c

Quoted 5 lines · Linux Kernel Mailing List

Commit: 1a74357066369be91e6f4f431621a00b052df964

arch/x86/kernel/microcode_amd.c +0 -0
index 9f13324..26e33bd 100644

[]

arch/x86/kernel/microcode_amd.c static int get_matching_microcode(int cpu, void *mc, int rev) · line 119

Quoted 9 lines
arch/x86/kernel/microcode_amd.c +1 -1
@@ -113,7 +113,7 @@ static int get_matching_microcode(int cpu, void *mc, int rev)
 
 	/* ucode might be chipset specific -- currently we don't support this */
 	if (mc_header->nb_dev_id || mc_header->sb_dev_id) {
-		printk(KERN_ERR "microcode: CPU%d: loading of chipset "
+		pr_err(KERN_ERR "microcode: CPU%d: loading of chipset "
 		       "specific code not yet supported\n", cpu);
 		return 0;
 	}

Duplicates KERN_ERR

I think this one was better:
http://patchwork.kernel.org/patch/51654/

#2 lore raw
Quoted 9 lines · Joe Perches

arch/x86/kernel/microcode_amd.c

Quoted 5 lines · Linux Kernel Mailing List

Commit: 1a74357066369be91e6f4f431621a00b052df964

arch/x86/kernel/microcode_amd.c +0 -0
index 9f13324..26e33bd 100644

[]

Quoted 2 lines
arch/x86/kernel/microcode_amd.c +0 -0
@@ -113,7 +113,7 @@ static int get_matching_microcode(int cpu, void *mc, int rev)
 
Quoted 9 lines

arch/x86/kernel/microcode_amd.c static int get_matching_microcode(int cpu, void *mc, int rev) · line 119

Quoted 7 lines
arch/x86/kernel/microcode_amd.c +1 -1
 	/* ucode might be chipset specific -- currently we don't support this */
 	if (mc_header->nb_dev_id || mc_header->sb_dev_id) {
-		printk(KERN_ERR "microcode: CPU%d: loading of chipset "
+		pr_err(KERN_ERR "microcode: CPU%d: loading of chipset "
 		       "specific code not yet supported\n", cpu);
 		return 0;
 	}

Duplicates KERN_ERR

Indeed - please send a delta fix as this has been merged already.

( Andy: i suspect checkpatch could also grow a new warning perhaps, the
'\<pr_.*(KERN_.*' pattern will i suspect pinpoint something fishy in most cases. )

Ingo

author maintainer
#3 lore raw

PATCH 1/1 arch/x86/kernel/microcode*: Use pr_fmt and remove duplicated KERN_ERR prefix

Quoted 4 lines · Ingo Molnar
Quoted 3 lines

Review

Quoted 2 lines
(quoted diff) +1 -1
-		printk(KERN_ERR "microcode: CPU%d: loading of chipset "
+		pr_err(KERN_ERR "microcode: CPU%d: loading of chipset "

Duplicates KERN_ERR

Indeed - please send a delta fix as this has been merged already.

Use #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove "microcode: " prefix from each pr_<level> Fix duplicated KERN_ERR prefix
Coalesce pr_<level> format strings
Add a space after an exclamation point No other change in output

---
 arch/x86/kernel/microcode_amd.c   |   40 +++++++++++++++----------------
 arch/x86/kernel/microcode_core.c  |   26 +++++++++++---------
 arch/x86/kernel/microcode_intel.c |   47 +++++++++++++++---------------------
 3 files changed, 53 insertions(+), 60 deletions(-)
arch/x86/kernel/microcode_amd.c +19 -21
index 63123d9..37542b6 100644
@@ -13,6 +13,9 @@
  *  Licensed under the terms of the GNU General Public
  *  License version 2. See file COPYING for details.
  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/firmware.h>
 #include <linux/pci_ids.h>
 #include <linux/uaccess.h>
@@ -81,7 +84,7 @@ static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig)
 
 	memset(csig, 0, sizeof(*csig));
 	rdmsr(MSR_AMD64_PATCH_LEVEL, csig->rev, dummy);
-	pr_info("microcode: CPU%d: patch_level=0x%x\n", cpu, csig->rev);
+	pr_info("CPU%d: patch_level=0x%x\n", cpu, csig->rev);
 	return 0;
 }
 
@@ -111,8 +114,8 @@ static int get_matching_microcode(int cpu, void *mc, int rev)
 
 	/* ucode might be chipset specific -- currently we don't support this */
 	if (mc_header->nb_dev_id || mc_header->sb_dev_id) {
-		pr_err(KERN_ERR "microcode: CPU%d: loading of chipset "
-		       "specific code not yet supported\n", cpu);
+		pr_err("CPU%d: loading of chipset specific code not yet supported\n",
+		       cpu);
 		return 0;
 	}
 
@@ -141,12 +144,12 @@ static int apply_microcode_amd(int cpu)
 
 	/* check current patch id and patch's id for match */
 	if (rev != mc_amd->hdr.patch_id) {
-		pr_err("microcode: CPU%d: update failed "
-		       "(for patch_level=0x%x)\n", cpu, mc_amd->hdr.patch_id);
+		pr_err("CPU%d: update failed (for patch_level=0x%x)\n",
+		       cpu, mc_amd->hdr.patch_id);
 		return -1;
 	}
 
-	pr_info("microcode: CPU%d: updated (new patch_level=0x%x)\n", cpu, rev);
+	pr_info("CPU%d: updated (new patch_level=0x%x)\n", cpu, rev);
 	uci->cpu_sig.rev = rev;
 
 	return 0;
@@ -169,15 +172,14 @@ get_next_ucode(const u8 *buf, unsigned int size, unsigned int *mc_size)
 		return NULL;
 
 	if (section_hdr[0] != UCODE_UCODE_TYPE) {
-		pr_err("microcode: error: invalid type field in "
-		       "container file section header\n");
+		pr_err("error: invalid type field in container file section header\n");
 		return NULL;
 	}
 
 	total_size = (unsigned long) (section_hdr[4] + (section_hdr[5] << 8));
 
 	if (total_size > size || total_size > UCODE_MAX_SIZE) {
-		pr_err("microcode: error: size mismatch\n");
+		pr_err("error: size mismatch\n");
 		return NULL;
 	}
 
@@ -206,14 +208,13 @@ static int install_equiv_cpu_table(const u8 *buf)
 	size = buf_pos[2];
 
 	if (buf_pos[1] != UCODE_EQUIV_CPU_TABLE_TYPE || !size) {
-		pr_err("microcode: error: invalid type field in "
-		       "container file section header\n");
+		pr_err("error: invalid type field in container file section header\n");
 		return 0;
 	}
 
 	equiv_cpu_table = (struct equiv_cpu_entry *) vmalloc(size);
 	if (!equiv_cpu_table) {
-		pr_err("microcode: failed to allocate equivalent CPU table\n");
+		pr_err("failed to allocate equivalent CPU table\n");
 		return 0;
 	}
 
@@ -246,7 +247,7 @@ generic_load_microcode(int cpu, const u8 *data, size_t size)
 
 	offset = install_equiv_cpu_table(ucode_ptr);
 	if (!offset) {
-		pr_err("microcode: failed to create equivalent cpu table\n");
+		pr_err("failed to create equivalent cpu table\n");
 		return UCODE_ERROR;
 	}
 
@@ -277,8 +278,7 @@ generic_load_microcode(int cpu, const u8 *data, size_t size)
 		if (!leftover) {
 			vfree(uci->mc);
 			uci->mc = new_mc;
-			pr_debug("microcode: CPU%d found a matching microcode "
-				 "update with version 0x%x (current=0x%x)\n",
+			pr_debug("CPU%d found a matching microcode update with version 0x%x (current=0x%x)\n",
 				 cpu, new_rev, uci->cpu_sig.rev);
 		} else {
 			vfree(new_mc);
@@ -300,7 +300,7 @@ static enum ucode_state request_microcode_fw(int cpu, struct device *device)
 		return UCODE_NFOUND;
 
 	if (*(u32 *)firmware->data != UCODE_MAGIC) {
-		pr_err("microcode: invalid UCODE_MAGIC (0x%08x)\n",
+		pr_err("invalid UCODE_MAGIC (0x%08x)\n",
 		       *(u32 *)firmware->data);
 		return UCODE_ERROR;
 	}
@@ -313,8 +313,7 @@ static enum ucode_state request_microcode_fw(int cpu, struct device *device)
 static enum ucode_state
 request_microcode_user(int cpu, const void __user *buf, size_t size)
 {
-	pr_info("microcode: AMD microcode update via "
-		"/dev/cpu/microcode not supported\n");
+	pr_info("AMD microcode update via /dev/cpu/microcode not supported\n");
 	return UCODE_ERROR;
 }
 
@@ -334,14 +333,13 @@ void init_microcode_amd(struct device *device)
 	WARN_ON(c->x86_vendor != X86_VENDOR_AMD);
 
 	if (c->x86 < 0x10) {
-		pr_warning("microcode: AMD CPU family 0x%x not supported\n",
-			   c->x86);
+		pr_warning("AMD CPU family 0x%x not supported\n", c->x86);
 		return;
 	}
 	supported_cpu = 1;
 
 	if (request_firmware(&firmware, fw_name, device))
-		pr_err("microcode: failed to load file %s\n", fw_name);
+		pr_err("failed to load file %s\n", fw_name);
 }
 
 void fini_microcode_amd(void)
arch/x86/kernel/microcode_core.c +14 -12
index e68aae3..844c02c 100644
@@ -70,6 +70,9 @@
  *		Fix sigmatch() macro to handle old CPUs with pf == 0.
  *		Thanks to Stuart Swales for pointing out this bug.
  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/platform_device.h>
 #include <linux/miscdevice.h>
 #include <linux/capability.h>
@@ -209,7 +212,7 @@ static ssize_t microcode_write(struct file *file, const char __user *buf,
 	ssize_t ret = -EINVAL;
 
 	if ((len >> PAGE_SHIFT) > totalram_pages) {
-		pr_err("microcode: too much data (max %ld pages)\n", totalram_pages);
+		pr_err("too much data (max %ld pages)\n", totalram_pages);
 		return ret;
 	}
 
@@ -244,7 +247,7 @@ static int __init microcode_dev_init(void)
 
 	error = misc_register(&microcode_dev);
 	if (error) {
-		pr_err("microcode: can't misc_register on minor=%d\n", MICROCODE_MINOR);
+		pr_err("can't misc_register on minor=%d\n", MICROCODE_MINOR);
 		return error;
 	}
 
@@ -359,7 +362,7 @@ static enum ucode_state microcode_resume_cpu(int cpu)
 	if (!uci->mc)
 		return UCODE_NFOUND;
 
-	pr_debug("microcode: CPU%d updated upon resume\n", cpu);
+	pr_debug("CPU%d updated upon resume\n", cpu);
 	apply_microcode_on_target(cpu);
 
 	return UCODE_OK;
@@ -379,7 +382,7 @@ static enum ucode_state microcode_init_cpu(int cpu)
 	ustate = microcode_ops->request_microcode_fw(cpu, &microcode_pdev->dev);
 
 	if (ustate == UCODE_OK) {
-		pr_debug("microcode: CPU%d updated upon init\n", cpu);
+		pr_debug("CPU%d updated upon init\n", cpu);
 		apply_microcode_on_target(cpu);
 	}
 
@@ -406,7 +409,7 @@ static int mc_sysdev_add(struct sys_device *sys_dev)
 	if (!cpu_online(cpu))
 		return 0;
 
-	pr_debug("microcode: CPU%d added\n", cpu);
+	pr_debug("CPU%d added\n", cpu);
 
 	err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group);
 	if (err)
@@ -425,7 +428,7 @@ static int mc_sysdev_remove(struct sys_device *sys_dev)
 	if (!cpu_online(cpu))
 		return 0;
 
-	pr_debug("microcode: CPU%d removed\n", cpu);
+	pr_debug("CPU%d removed\n", cpu);
 	microcode_fini_cpu(cpu);
 	sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
 	return 0;
@@ -473,15 +476,15 @@ mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu)
 		microcode_update_cpu(cpu);
 	case CPU_DOWN_FAILED:
 	case CPU_DOWN_FAILED_FROZEN:
-		pr_debug("microcode: CPU%d added\n", cpu);
+		pr_debug("CPU%d added\n", cpu);
 		if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group))
-			pr_err("microcode: Failed to create group for CPU%d\n", cpu);
+			pr_err("Failed to create group for CPU%d\n", cpu);
 		break;
 	case CPU_DOWN_PREPARE:
 	case CPU_DOWN_PREPARE_FROZEN:
 		/* Suspend is in progress, only remove the interface */
 		sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
-		pr_debug("microcode: CPU%d removed\n", cpu);
+		pr_debug("CPU%d removed\n", cpu);
 		break;
 	case CPU_DEAD:
 	case CPU_UP_CANCELED_FROZEN:
@@ -507,7 +510,7 @@ static int __init microcode_init(void)
 		microcode_ops = init_amd_microcode();
 
 	if (!microcode_ops) {
-		pr_err("microcode: no support for this CPU vendor\n");
+		pr_err("no support for this CPU vendor\n");
 		return -ENODEV;
 	}
 
@@ -541,8 +544,7 @@ static int __init microcode_init(void)
 	register_hotcpu_notifier(&mc_cpu_notifier);
 
 	pr_info("Microcode Update Driver: v" MICROCODE_VERSION
-	       " <[email protected]>,"
-	       " Peter Oruba\n");
+		" <[email protected]>, Peter Oruba\n");
 
 	return 0;
 }
arch/x86/kernel/microcode_intel.c +20 -27

129 lines not on this page · raw message

#4 lore raw

Re: [PATCH] arch/x86/kernel/microcode*: Use pr_fmt and remove duplicated KERN_ERR prefix

Quoted 13 lines · Joe Perches
Quoted 4 lines · Ingo Molnar
Quoted 3 lines

Review

Quoted 2 lines
(quoted diff) +1 -1
-		printk(KERN_ERR "microcode: CPU%d: loading of chipset "
+		pr_err(KERN_ERR "microcode: CPU%d: loading of chipset "

Duplicates KERN_ERR

Indeed - please send a delta fix as this has been merged already.

Use #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove "microcode: " prefix from each pr_<level> Fix duplicated KERN_ERR prefix
Coalesce pr_<level> format strings
Add a space after an exclamation point No other change in output

Quoted 6 lines
---
 arch/x86/kernel/microcode_amd.c   |   40 +++++++++++++++----------------
 arch/x86/kernel/microcode_core.c  |   26 +++++++++++---------
 arch/x86/kernel/microcode_intel.c |   47 +++++++++++++++---------------------
 3 files changed, 53 insertions(+), 60 deletions(-)

very nice. I've applied it, thanks Joe!

Ingo

author maintainer
#5 lore raw

cover arch/x86: Add #define pr_fmt(fmt) and use pr_<level>

For the files that primarily use embedded prefixes:

Standardize a bit on use of pr_<level>, removed embedded prefixes and use #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt as appropriate. Coalesced long format strings.

Joe Perches (5):
es7000_32.c: use pr_<level> and add pr_fmt(fmt) arch/x86/kernel/setup_percpu.c: use pr_<level> and add pr_fmt(fmt) i8254.c: Add pr_fmt(fmt)
kmmio.c: Add and use pr_fmt(fmt) arch/x86/mm/mmio-mod.c: use pr_fmt

 arch/x86/kernel/apic/es7000_32.c |   12 ++++---
 arch/x86/kernel/setup_percpu.c   |   13 ++++---
 arch/x86/kvm/i8254.c             |   12 ++++---
 arch/x86/mm/kmmio.c              |   40 +++++++++++-----------
 arch/x86/mm/mmio-mod.c           |   71 ++++++++++++++++++-------------------
 5 files changed, 76 insertions(+), 72 deletions(-)
author maintainer
#6 lore raw

PATCH 1/5 es7000_32.c: use pr_<level> and add pr_fmt(fmt)

Added #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Converted a few printk(KERN_INFO to pr_info(
Stripped "es7000_mipcfg" from pr_debug

---
 arch/x86/kernel/apic/es7000_32.c |   12 +++++++-----
 1 files changed, 7 insertions(+), 5 deletions(-)
arch/x86/kernel/apic/es7000_32.c +7 -5
index e85f8fb..dd2b5f2 100644
@@ -27,6 +27,9 @@
  *
  * http://www.unisys.com
  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/notifier.h>
 #include <linux/spinlock.h>
 #include <linux/cpumask.h>
@@ -223,9 +226,9 @@ static int parse_unisys_oem(char *oemptr)
 			mip_addr = val;
 			mip = (struct mip_reg *)val;
 			mip_reg = __va(mip);
-			pr_debug("es7000_mipcfg: host_reg = 0x%lx \n",
+			pr_debug("host_reg = 0x%lx\n",
 				 (unsigned long)host_reg);
-			pr_debug("es7000_mipcfg: mip_reg = 0x%lx \n",
+			pr_debug("mip_reg = 0x%lx\n",
 				 (unsigned long)mip_reg);
 			success++;
 			break;
@@ -401,7 +404,7 @@ static void es7000_enable_apic_mode(void)
 	if (!es7000_plat)
 		return;
 
-	printk(KERN_INFO "ES7000: Enabling APIC mode.\n");
+	pr_info("Enabling APIC mode.\n");
 	memset(&es7000_mip_reg, 0, sizeof(struct mip_reg));
 	es7000_mip_reg.off_0x00 = MIP_SW_APIC;
 	es7000_mip_reg.off_0x38 = MIP_VALID;
@@ -514,8 +517,7 @@ static void es7000_setup_apic_routing(void)
 {
 	int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id());
 
-	printk(KERN_INFO
-	  "Enabling APIC mode:  %s. Using %d I/O APICs, target cpus %lx\n",
+	pr_info("Enabling APIC mode:  %s. Using %d I/O APICs, target cpus %lx\n",
 		(apic_version[apic] == 0x14) ?
 			"Physical Cluster" : "Logical Cluster",
 		nr_ioapics, cpumask_bits(es7000_target_cpus())[0]);
Signature · 1 line
1.6.6.rc0.57.gad7a
author maintainer
#7 lore raw

[tip:x86/urgent] x86: es7000_32.c: Use pr_<level> and add pr_fmt(fmt)

Commit-ID:  5cd476effe9570d2e520cf904d51f5c992972647
Gitweb:     http://git.kernel.org/tip/5cd476effe9570d2e520cf904d51f5c992972647
Author:     Joe Perches <[email protected]>
AuthorDate: Wed, 9 Dec 2009 10:45:33 -0800
Committer:  Ingo Molnar <[email protected]>
CommitDate: Thu, 10 Dec 2009 08:57:49 +0100

x86: es7000_32.c: Use pr_<level> and add pr_fmt(fmt)

- Added #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
- Converted a few printk(KERN_INFO to pr_info(
- Stripped "es7000_mipcfg" from pr_debug

LKML-Reference: <3b4375af246dec5941168858910210937c110af9.1260383912.git.joe@perches.com>

---
 arch/x86/kernel/apic/es7000_32.c |   12 +++++++-----
 1 files changed, 7 insertions(+), 5 deletions(-)
arch/x86/kernel/apic/es7000_32.c +7 -5
index e85f8fb..dd2b5f2 100644
@@ -27,6 +27,9 @@
  *
  * http://www.unisys.com
  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/notifier.h>
 #include <linux/spinlock.h>
 #include <linux/cpumask.h>
@@ -223,9 +226,9 @@ static int parse_unisys_oem(char *oemptr)
 			mip_addr = val;
 			mip = (struct mip_reg *)val;
 			mip_reg = __va(mip);
-			pr_debug("es7000_mipcfg: host_reg = 0x%lx \n",
+			pr_debug("host_reg = 0x%lx\n",
 				 (unsigned long)host_reg);
-			pr_debug("es7000_mipcfg: mip_reg = 0x%lx \n",
+			pr_debug("mip_reg = 0x%lx\n",
 				 (unsigned long)mip_reg);
 			success++;
 			break;
@@ -401,7 +404,7 @@ static void es7000_enable_apic_mode(void)
 	if (!es7000_plat)
 		return;
 
-	printk(KERN_INFO "ES7000: Enabling APIC mode.\n");
+	pr_info("Enabling APIC mode.\n");
 	memset(&es7000_mip_reg, 0, sizeof(struct mip_reg));
 	es7000_mip_reg.off_0x00 = MIP_SW_APIC;
 	es7000_mip_reg.off_0x38 = MIP_VALID;
@@ -514,8 +517,7 @@ static void es7000_setup_apic_routing(void)
 {
 	int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id());
 
-	printk(KERN_INFO
-	  "Enabling APIC mode:  %s. Using %d I/O APICs, target cpus %lx\n",
+	pr_info("Enabling APIC mode:  %s. Using %d I/O APICs, target cpus %lx\n",
 		(apic_version[apic] == 0x14) ?
 			"Physical Cluster" : "Logical Cluster",
 		nr_ioapics, cpumask_bits(es7000_target_cpus())[0]);
author maintainer
#8 lore raw

PATCH 2/5 arch/x86/kernel/setup_percpu.c: use pr_<level> and add pr_fmt(fmt)

In reply to Joe Perches

Added #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Stripped PERCPU: from a pr_warning

---
 arch/x86/kernel/setup_percpu.c |   13 +++++++------
 1 files changed, 7 insertions(+), 6 deletions(-)
arch/x86/kernel/setup_percpu.c +7 -6
index d559af9..35abcb8 100644
@@ -1,3 +1,5 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -20,9 +22,9 @@
 #include <asm/stackprotector.h>
 
 #ifdef CONFIG_DEBUG_PER_CPU_MAPS
-# define DBG(x...) printk(KERN_DEBUG x)
+# define DBG(fmt, ...) pr_dbg(fmt, ##__VA_ARGS__)
 #else
-# define DBG(x...)
+# define DBG(fmt, ...) do { if (0) pr_dbg(fmt, ##__VA_ARGS__); } while (0)
 #endif
 
 DEFINE_PER_CPU(int, cpu_number);
@@ -116,8 +118,8 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
 	} else {
 		ptr = __alloc_bootmem_node_nopanic(NODE_DATA(node),
 						   size, align, goal);
-		pr_debug("per cpu data for cpu%d %lu bytes on node%d at "
-			 "%016lx\n", cpu, size, node, __pa(ptr));
+		pr_debug("per cpu data for cpu%d %lu bytes on node%d at %016lx\n",
+			 cpu, size, node, __pa(ptr));
 	}
 	return ptr;
 #else
@@ -198,8 +200,7 @@ void __init setup_per_cpu_areas(void)
 					    pcpu_cpu_distance,
 					    pcpu_fc_alloc, pcpu_fc_free);
 		if (rc < 0)
-			pr_warning("PERCPU: %s allocator failed (%d), "
-				   "falling back to page size\n",
+			pr_warning("%s allocator failed (%d), falling back to page size\n",
 				   pcpu_fc_names[pcpu_chosen_fc], rc);
 	}
 	if (rc < 0)
Signature · 1 line
1.6.6.rc0.57.gad7a
author maintainer
#9 lore raw

[tip:x86/urgent] x86: setup_percpu.c: Use pr_<level> and add pr_fmt(fmt)

Commit-ID:  40685236b3161b80030a4df34bcbc5941ea59876
Gitweb:     http://git.kernel.org/tip/40685236b3161b80030a4df34bcbc5941ea59876
Author:     Joe Perches <[email protected]>
AuthorDate: Wed, 9 Dec 2009 10:45:34 -0800
Committer:  Ingo Molnar <[email protected]>
CommitDate: Thu, 10 Dec 2009 08:57:50 +0100

x86: setup_percpu.c: Use pr_<level> and add pr_fmt(fmt)

- Added #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
- Stripped PERCPU: from a pr_warning

LKML-Reference: <7ead24eccbea8f2b11795abad3e2893a98e1e111.1260383912.git.joe@perches.com>

---
 arch/x86/kernel/setup_percpu.c |   13 +++++++------
 1 files changed, 7 insertions(+), 6 deletions(-)
arch/x86/kernel/setup_percpu.c +7 -6
index d559af9..35abcb8 100644
@@ -1,3 +1,5 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -20,9 +22,9 @@
 #include <asm/stackprotector.h>
 
 #ifdef CONFIG_DEBUG_PER_CPU_MAPS
-# define DBG(x...) printk(KERN_DEBUG x)
+# define DBG(fmt, ...) pr_dbg(fmt, ##__VA_ARGS__)
 #else
-# define DBG(x...)
+# define DBG(fmt, ...) do { if (0) pr_dbg(fmt, ##__VA_ARGS__); } while (0)
 #endif
 
 DEFINE_PER_CPU(int, cpu_number);
@@ -116,8 +118,8 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
 	} else {
 		ptr = __alloc_bootmem_node_nopanic(NODE_DATA(node),
 						   size, align, goal);
-		pr_debug("per cpu data for cpu%d %lu bytes on node%d at "
-			 "%016lx\n", cpu, size, node, __pa(ptr));
+		pr_debug("per cpu data for cpu%d %lu bytes on node%d at %016lx\n",
+			 cpu, size, node, __pa(ptr));
 	}
 	return ptr;
 #else
@@ -198,8 +200,7 @@ void __init setup_per_cpu_areas(void)
 					    pcpu_cpu_distance,
 					    pcpu_fc_alloc, pcpu_fc_free);
 		if (rc < 0)
-			pr_warning("PERCPU: %s allocator failed (%d), "
-				   "falling back to page size\n",
+			pr_warning("%s allocator failed (%d), falling back to page size\n",
 				   pcpu_fc_names[pcpu_chosen_fc], rc);
 	}
 	if (rc < 0)
author maintainer
#10 lore raw

PATCH 3/5 i8254.c: Add pr_fmt(fmt)

In reply to Joe Perches

Add pr_fmt(fmt) "pit: " fmt
Strip pit: prefixes from pr_debug

---
 arch/x86/kvm/i8254.c |   12 +++++++-----
 1 files changed, 7 insertions(+), 5 deletions(-)
arch/x86/kvm/i8254.c +7 -5
index fab7440..296aba4 100644
@@ -29,6 +29,8 @@
  *   Based on QEMU and Xen.
  */
 
+#define pr_fmt(fmt) "pit: " fmt
+
 #include <linux/kvm_host.h>
 
 #include "irq.h"
@@ -262,7 +264,7 @@ void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu)
 
 static void destroy_pit_timer(struct kvm_timer *pt)
 {
-	pr_debug("pit: execute del timer!\n");
+	pr_debug("execute del timer!\n");
 	hrtimer_cancel(&pt->timer);
 }
 
@@ -284,7 +286,7 @@ static void create_pit_timer(struct kvm_kpit_state *ps, u32 val, int is_period)
 
 	interval = muldiv64(val, NSEC_PER_SEC, KVM_PIT_FREQ);
 
-	pr_debug("pit: create pit timer, interval is %llu nsec\n", interval);
+	pr_debug("create pit timer, interval is %llu nsec\n", interval);
 
 	/* TODO The new value only affected after the retriggered */
 	hrtimer_cancel(&pt->timer);
@@ -309,7 +311,7 @@ static void pit_load_count(struct kvm *kvm, int channel, u32 val)
 
 	WARN_ON(!mutex_is_locked(&ps->lock));
 
-	pr_debug("pit: load_count val is %d, channel is %d\n", val, channel);
+	pr_debug("load_count val is %d, channel is %d\n", val, channel);
 
 	/*
 	 * The largest possible initial count is 0; this is equivalent
@@ -395,8 +397,8 @@ static int pit_ioport_write(struct kvm_io_device *this,
 	mutex_lock(&pit_state->lock);
 
 	if (val != 0)
-		pr_debug("pit: write addr is 0x%x, len is %d, val is 0x%x\n",
-			  (unsigned int)addr, len, val);
+		pr_debug("write addr is 0x%x, len is %d, val is 0x%x\n",
+			 (unsigned int)addr, len, val);
 
 	if (addr == 3) {
 		channel = val >> 6;
Signature · 1 line
1.6.6.rc0.57.gad7a
author maintainer
#11 lore raw

[tip:x86/urgent] x86: i8254.c: Add pr_fmt(fmt)

Commit-ID:  a78d9626f4f6fa7904bfdb071205080743125983
Gitweb:     http://git.kernel.org/tip/a78d9626f4f6fa7904bfdb071205080743125983
Author:     Joe Perches <[email protected]>
AuthorDate: Wed, 9 Dec 2009 10:45:35 -0800
Committer:  Ingo Molnar <[email protected]>
CommitDate: Thu, 10 Dec 2009 08:57:50 +0100

x86: i8254.c: Add pr_fmt(fmt)

- Add pr_fmt(fmt) "pit: " fmt
- Strip pit: prefixes from pr_debug

LKML-Reference: <bbd4de532f18bb7c11f64ba20d224c08291cb126.1260383912.git.joe@perches.com>

---
 arch/x86/kvm/i8254.c |   12 +++++++-----
 1 files changed, 7 insertions(+), 5 deletions(-)
arch/x86/kvm/i8254.c +7 -5
index fab7440..296aba4 100644
@@ -29,6 +29,8 @@
  *   Based on QEMU and Xen.
  */
 
+#define pr_fmt(fmt) "pit: " fmt
+
 #include <linux/kvm_host.h>
 
 #include "irq.h"
@@ -262,7 +264,7 @@ void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu)
 
 static void destroy_pit_timer(struct kvm_timer *pt)
 {
-	pr_debug("pit: execute del timer!\n");
+	pr_debug("execute del timer!\n");
 	hrtimer_cancel(&pt->timer);
 }
 
@@ -284,7 +286,7 @@ static void create_pit_timer(struct kvm_kpit_state *ps, u32 val, int is_period)
 
 	interval = muldiv64(val, NSEC_PER_SEC, KVM_PIT_FREQ);
 
-	pr_debug("pit: create pit timer, interval is %llu nsec\n", interval);
+	pr_debug("create pit timer, interval is %llu nsec\n", interval);
 
 	/* TODO The new value only affected after the retriggered */
 	hrtimer_cancel(&pt->timer);
@@ -309,7 +311,7 @@ static void pit_load_count(struct kvm *kvm, int channel, u32 val)
 
 	WARN_ON(!mutex_is_locked(&ps->lock));
 
-	pr_debug("pit: load_count val is %d, channel is %d\n", val, channel);
+	pr_debug("load_count val is %d, channel is %d\n", val, channel);
 
 	/*
 	 * The largest possible initial count is 0; this is equivalent
@@ -395,8 +397,8 @@ static int pit_ioport_write(struct kvm_io_device *this,
 	mutex_lock(&pit_state->lock);
 
 	if (val != 0)
-		pr_debug("pit: write addr is 0x%x, len is %d, val is 0x%x\n",
-			  (unsigned int)addr, len, val);
+		pr_debug("write addr is 0x%x, len is %d, val is 0x%x\n",
+			 (unsigned int)addr, len, val);
 
 	if (addr == 3) {
 		channel = val >> 6;
author maintainer
#12 lore raw

PATCH 4/5 kmmio.c: Add and use pr_fmt(fmt)

In reply to Joe Perches

Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Strip "kmmio: " from pr_<level>s

---
 arch/x86/mm/kmmio.c |   40 ++++++++++++++++++++--------------------
 1 files changed, 20 insertions(+), 20 deletions(-)
arch/x86/mm/kmmio.c +20 -20
index 11a4ad4..823168b 100644
@@ -5,6 +5,8 @@
  *     2008 Pekka Paalanen <[email protected]>
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/list.h>
 #include <linux/rculist.h>
 #include <linux/spinlock.h>
@@ -136,7 +138,7 @@ static int clear_page_presence(struct kmmio_fault_page *f, bool clear)
 	pte_t *pte = lookup_address(f->page, &level);
 
 	if (!pte) {
-		pr_err("kmmio: no pte for page 0x%08lx\n", f->page);
+		pr_err("no pte for page 0x%08lx\n", f->page);
 		return -1;
 	}
 
@@ -148,7 +150,7 @@ static int clear_page_presence(struct kmmio_fault_page *f, bool clear)
 		clear_pte_presence(pte, clear, &f->old_presence);
 		break;
 	default:
-		pr_err("kmmio: unexpected page level 0x%x.\n", level);
+		pr_err("unexpected page level 0x%x.\n", level);
 		return -1;
 	}
 
@@ -170,13 +172,14 @@ static int clear_page_presence(struct kmmio_fault_page *f, bool clear)
 static int arm_kmmio_fault_page(struct kmmio_fault_page *f)
 {
 	int ret;
-	WARN_ONCE(f->armed, KERN_ERR "kmmio page already armed.\n");
+	WARN_ONCE(f->armed, KERN_ERR pr_fmt("kmmio page already armed.\n"));
 	if (f->armed) {
-		pr_warning("kmmio double-arm: page 0x%08lx, ref %d, old %d\n",
-					f->page, f->count, !!f->old_presence);
+		pr_warning("double-arm: page 0x%08lx, ref %d, old %d\n",
+			   f->page, f->count, !!f->old_presence);
 	}
 	ret = clear_page_presence(f, true);
-	WARN_ONCE(ret < 0, KERN_ERR "kmmio arming 0x%08lx failed.\n", f->page);
+	WARN_ONCE(ret < 0, KERN_ERR pr_fmt("arming 0x%08lx failed.\n"),
+		  f->page);
 	f->armed = true;
 	return ret;
 }
@@ -240,24 +243,21 @@ int kmmio_handler(struct pt_regs *regs, unsigned long addr)
 			 * condition needs handling by do_page_fault(), the
 			 * page really not being present is the most common.
 			 */
-			pr_debug("kmmio: secondary hit for 0x%08lx CPU %d.\n",
-					addr, smp_processor_id());
+			pr_debug("secondary hit for 0x%08lx CPU %d.\n",
+				 addr, smp_processor_id());
 
 			if (!faultpage->old_presence)
-				pr_info("kmmio: unexpected secondary hit for "
-					"address 0x%08lx on CPU %d.\n", addr,
-					smp_processor_id());
+				pr_info("unexpected secondary hit for address 0x%08lx on CPU %d.\n",
+					addr, smp_processor_id());
 		} else {
 			/*
 			 * Prevent overwriting already in-flight context.
 			 * This should not happen, let's hope disarming at
 			 * least prevents a panic.
 			 */
-			pr_emerg("kmmio: recursive probe hit on CPU %d, "
-					"for address 0x%08lx. Ignoring.\n",
-					smp_processor_id(), addr);
-			pr_emerg("kmmio: previous hit was at 0x%08lx.\n",
-						ctx->addr);
+			pr_emerg("recursive probe hit on CPU %d, for address 0x%08lx. Ignoring.\n",
+				 smp_processor_id(), addr);
+			pr_emerg("previous hit was at 0x%08lx.\n", ctx->addr);
 			disarm_kmmio_fault_page(faultpage);
 		}
 		goto no_kmmio_ctx;
@@ -316,8 +316,8 @@ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs)
 		 * something external causing them (f.e. using a debugger while
 		 * mmio tracing enabled), or erroneous behaviour
 		 */
-		pr_warning("kmmio: unexpected debug trap on CPU %d.\n",
-							smp_processor_id());
+		pr_warning("unexpected debug trap on CPU %d.\n",
+			   smp_processor_id());
 		goto out;
 	}
 
@@ -425,7 +425,7 @@ int register_kmmio_probe(struct kmmio_probe *p)
 	list_add_rcu(&p->list, &kmmio_probes);
 	while (size < size_lim) {
 		if (add_kmmio_fault_page(p->addr + size))
-			pr_err("kmmio: Unable to set page fault.\n");
+			pr_err("Unable to set page fault.\n");
 		size += PAGE_SIZE;
 	}
 out:
@@ -511,7 +511,7 @@ void unregister_kmmio_probe(struct kmmio_probe *p)
 
 	drelease = kmalloc(sizeof(*drelease), GFP_ATOMIC);
 	if (!drelease) {
-		pr_crit("kmmio: leaking kmmio_fault_page objects.\n");
+		pr_crit("leaking kmmio_fault_page objects.\n");
 		return;
 	}
 	drelease->release_list = release_list;
Signature · 1 line
1.6.6.rc0.57.gad7a
author maintainer
#13 lore raw

[tip:x86/urgent] x86: kmmio.c: Add and use pr_fmt(fmt)

Commit-ID:  1bd591a5f17f546121fcf0015d72cc3e9c49cc29
Gitweb:     http://git.kernel.org/tip/1bd591a5f17f546121fcf0015d72cc3e9c49cc29
Author:     Joe Perches <[email protected]>
AuthorDate: Wed, 9 Dec 2009 10:45:36 -0800
Committer:  Ingo Molnar <[email protected]>
CommitDate: Thu, 10 Dec 2009 08:57:51 +0100

x86: kmmio.c: Add and use pr_fmt(fmt)

- Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
- Strip "kmmio: " from pr_<level>s

LKML-Reference: <7aa509f8a23933036d39f54bd51e9acc52068049.1260383912.git.joe@perches.com>

---
 arch/x86/mm/kmmio.c |   40 ++++++++++++++++++++--------------------
 1 files changed, 20 insertions(+), 20 deletions(-)
arch/x86/mm/kmmio.c +20 -20
index 88612cd..68c3e89 100644
@@ -5,6 +5,8 @@
  *     2008 Pekka Paalanen <[email protected]>
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/list.h>
 #include <linux/rculist.h>
 #include <linux/spinlock.h>
@@ -136,7 +138,7 @@ static int clear_page_presence(struct kmmio_fault_page *f, bool clear)
 	pte_t *pte = lookup_address(f->page, &level);
 
 	if (!pte) {
-		pr_err("kmmio: no pte for page 0x%08lx\n", f->page);
+		pr_err("no pte for page 0x%08lx\n", f->page);
 		return -1;
 	}
 
@@ -148,7 +150,7 @@ static int clear_page_presence(struct kmmio_fault_page *f, bool clear)
 		clear_pte_presence(pte, clear, &f->old_presence);
 		break;
 	default:
-		pr_err("kmmio: unexpected page level 0x%x.\n", level);
+		pr_err("unexpected page level 0x%x.\n", level);
 		return -1;
 	}
 
@@ -170,13 +172,14 @@ static int clear_page_presence(struct kmmio_fault_page *f, bool clear)
 static int arm_kmmio_fault_page(struct kmmio_fault_page *f)
 {
 	int ret;
-	WARN_ONCE(f->armed, KERN_ERR "kmmio page already armed.\n");
+	WARN_ONCE(f->armed, KERN_ERR pr_fmt("kmmio page already armed.\n"));
 	if (f->armed) {
-		pr_warning("kmmio double-arm: page 0x%08lx, ref %d, old %d\n",
-					f->page, f->count, !!f->old_presence);
+		pr_warning("double-arm: page 0x%08lx, ref %d, old %d\n",
+			   f->page, f->count, !!f->old_presence);
 	}
 	ret = clear_page_presence(f, true);
-	WARN_ONCE(ret < 0, KERN_ERR "kmmio arming 0x%08lx failed.\n", f->page);
+	WARN_ONCE(ret < 0, KERN_ERR pr_fmt("arming 0x%08lx failed.\n"),
+		  f->page);
 	f->armed = true;
 	return ret;
 }
@@ -240,24 +243,21 @@ int kmmio_handler(struct pt_regs *regs, unsigned long addr)
 			 * condition needs handling by do_page_fault(), the
 			 * page really not being present is the most common.
 			 */
-			pr_debug("kmmio: secondary hit for 0x%08lx CPU %d.\n",
-					addr, smp_processor_id());
+			pr_debug("secondary hit for 0x%08lx CPU %d.\n",
+				 addr, smp_processor_id());
 
 			if (!faultpage->old_presence)
-				pr_info("kmmio: unexpected secondary hit for "
-					"address 0x%08lx on CPU %d.\n", addr,
-					smp_processor_id());
+				pr_info("unexpected secondary hit for address 0x%08lx on CPU %d.\n",
+					addr, smp_processor_id());
 		} else {
 			/*
 			 * Prevent overwriting already in-flight context.
 			 * This should not happen, let's hope disarming at
 			 * least prevents a panic.
 			 */
-			pr_emerg("kmmio: recursive probe hit on CPU %d, "
-					"for address 0x%08lx. Ignoring.\n",
-					smp_processor_id(), addr);
-			pr_emerg("kmmio: previous hit was at 0x%08lx.\n",
-						ctx->addr);
+			pr_emerg("recursive probe hit on CPU %d, for address 0x%08lx. Ignoring.\n",
+				 smp_processor_id(), addr);
+			pr_emerg("previous hit was at 0x%08lx.\n", ctx->addr);
 			disarm_kmmio_fault_page(faultpage);
 		}
 		goto no_kmmio_ctx;
@@ -316,8 +316,8 @@ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs)
 		 * something external causing them (f.e. using a debugger while
 		 * mmio tracing enabled), or erroneous behaviour
 		 */
-		pr_warning("kmmio: unexpected debug trap on CPU %d.\n",
-							smp_processor_id());
+		pr_warning("unexpected debug trap on CPU %d.\n",
+			   smp_processor_id());
 		goto out;
 	}
 
@@ -425,7 +425,7 @@ int register_kmmio_probe(struct kmmio_probe *p)
 	list_add_rcu(&p->list, &kmmio_probes);
 	while (size < size_lim) {
 		if (add_kmmio_fault_page(p->addr + size))
-			pr_err("kmmio: Unable to set page fault.\n");
+			pr_err("Unable to set page fault.\n");
 		size += PAGE_SIZE;
 	}
 out:
@@ -511,7 +511,7 @@ void unregister_kmmio_probe(struct kmmio_probe *p)
 
 	drelease = kmalloc(sizeof(*drelease), GFP_ATOMIC);
 	if (!drelease) {
-		pr_crit("kmmio: leaking kmmio_fault_page objects.\n");
+		pr_crit("leaking kmmio_fault_page objects.\n");
 		return;
 	}
 	drelease->release_list = release_list;
author maintainer
#14 lore raw

PATCH 5/5 arch/x86/mm/mmio-mod.c: use pr_fmt

In reply to Joe Perches

Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define NAME
Remove NAME from pr_<level>

---
 arch/x86/mm/mmio-mod.c |   71 +++++++++++++++++++++++------------------------
 1 files changed, 35 insertions(+), 36 deletions(-)
arch/x86/mm/mmio-mod.c +35 -36
index 132772a..4c765e9 100644
@@ -19,6 +19,9 @@
  *
  * Derived from the read-mod example from relay-examples by Tom Zanussi.
  */
+
+#define pr_fmt(fmt) "mmiotrace: "
+
 #define DEBUG 1
 
 #include <linux/module.h>
@@ -36,8 +39,6 @@
 
 #include "pf_in.h"
 
-#define NAME "mmiotrace: "
-
 struct trap_reason {
 	unsigned long addr;
 	unsigned long ip;
@@ -96,17 +97,18 @@ static void print_pte(unsigned long address)
 	pte_t *pte = lookup_address(address, &level);
 
 	if (!pte) {
-		pr_err(NAME "Error in %s: no pte for page 0x%08lx\n",
-							__func__, address);
+		pr_err("Error in %s: no pte for page 0x%08lx\n",
+		       __func__, address);
 		return;
 	}
 
 	if (level == PG_LEVEL_2M) {
-		pr_emerg(NAME "4MB pages are not currently supported: "
-							"0x%08lx\n", address);
+		pr_emerg("4MB pages are not currently supported: 0x%08lx\n",
+			 address);
 		BUG();
 	}
-	pr_info(NAME "pte for 0x%lx: 0x%llx 0x%llx\n", address,
+	pr_info("pte for 0x%lx: 0x%llx 0x%llx\n",
+		address,
 		(unsigned long long)pte_val(*pte),
 		(unsigned long long)pte_val(*pte) & _PAGE_PRESENT);
 }
@@ -118,22 +120,21 @@ static void print_pte(unsigned long address)
 static void die_kmmio_nesting_error(struct pt_regs *regs, unsigned long addr)
 {
 	const struct trap_reason *my_reason = &get_cpu_var(pf_reason);
-	pr_emerg(NAME "unexpected fault for address: 0x%08lx, "
-					"last fault for address: 0x%08lx\n",
-					addr, my_reason->addr);
+	pr_emerg("unexpected fault for address: 0x%08lx, last fault for address: 0x%08lx\n",
+		 addr, my_reason->addr);
 	print_pte(addr);
 	print_symbol(KERN_EMERG "faulting IP is at %s\n", regs->ip);
 	print_symbol(KERN_EMERG "last faulting IP was at %s\n", my_reason->ip);
 #ifdef __i386__
 	pr_emerg("eax: %08lx   ebx: %08lx   ecx: %08lx   edx: %08lx\n",
-			regs->ax, regs->bx, regs->cx, regs->dx);
+		 regs->ax, regs->bx, regs->cx, regs->dx);
 	pr_emerg("esi: %08lx   edi: %08lx   ebp: %08lx   esp: %08lx\n",
-			regs->si, regs->di, regs->bp, regs->sp);
+		 regs->si, regs->di, regs->bp, regs->sp);
 #else
 	pr_emerg("rax: %016lx   rcx: %016lx   rdx: %016lx\n",
-					regs->ax, regs->cx, regs->dx);
+		 regs->ax, regs->cx, regs->dx);
 	pr_emerg("rsi: %016lx   rdi: %016lx   rbp: %016lx   rsp: %016lx\n",
-				regs->si, regs->di, regs->bp, regs->sp);
+		 regs->si, regs->di, regs->bp, regs->sp);
 #endif
 	put_cpu_var(pf_reason);
 	BUG();
@@ -213,7 +214,7 @@ static void post(struct kmmio_probe *p, unsigned long condition,
 	/* this should always return the active_trace count to 0 */
 	my_reason->active_traces--;
 	if (my_reason->active_traces) {
-		pr_emerg(NAME "unexpected post handler");
+		pr_emerg("unexpected post handler");
 		BUG();
 	}
 
@@ -244,7 +245,7 @@ static void ioremap_trace_core(resource_size_t offset, unsigned long size,
 	};
 
 	if (!trace) {
-		pr_err(NAME "kmalloc failed in ioremap\n");
+		pr_err("kmalloc failed in ioremap\n");
 		return;
 	}
 
@@ -282,8 +283,8 @@ void mmiotrace_ioremap(resource_size_t offset, unsigned long size,
 	if (!is_enabled()) /* recheck and proper locking in *_core() */
 		return;
 
-	pr_debug(NAME "ioremap_*(0x%llx, 0x%lx) = %p\n",
-				(unsigned long long)offset, size, addr);
+	pr_debug("ioremap_*(0x%llx, 0x%lx) = %p\n",
+		 (unsigned long long)offset, size, addr);
 	if ((filter_offset) && (offset != filter_offset))
 		return;
 	ioremap_trace_core(offset, size, addr);
@@ -301,7 +302,7 @@ static void iounmap_trace_core(volatile void __iomem *addr)
 	struct remap_trace *tmp;
 	struct remap_trace *found_trace = NULL;
 
-	pr_debug(NAME "Unmapping %p.\n", addr);
+	pr_debug("Unmapping %p.\n", addr);
 
 	spin_lock_irq(&trace_lock);
 	if (!is_enabled())
@@ -363,9 +364,8 @@ static void clear_trace_list(void)
 	 * Caller also ensures is_enabled() cannot change.
 	 */
 	list_for_each_entry(trace, &trace_list, list) {
-		pr_notice(NAME "purging non-iounmapped "
-					"trace @0x%08lx, size 0x%lx.\n",
-					trace->probe.addr, trace->probe.len);
+		pr_notice("purging non-iounmapped trace @0x%08lx, size 0x%lx.\n",
+			  trace->probe.addr, trace->probe.len);
 		if (!nommiotrace)
 			unregister_kmmio_probe(&trace->probe);
 	}
@@ -387,7 +387,7 @@ static void enter_uniprocessor(void)
 
 	if (downed_cpus == NULL &&
 	    !alloc_cpumask_var(&downed_cpus, GFP_KERNEL)) {
-		pr_notice(NAME "Failed to allocate mask\n");
+		pr_notice("Failed to allocate mask\n");
 		goto out;
 	}
 
@@ -395,20 +395,19 @@ static void enter_uniprocessor(void)
 	cpumask_copy(downed_cpus, cpu_online_mask);
 	cpumask_clear_cpu(cpumask_first(cpu_online_mask), downed_cpus);
 	if (num_online_cpus() > 1)
-		pr_notice(NAME "Disabling non-boot CPUs...\n");
+		pr_notice("Disabling non-boot CPUs...\n");
 	put_online_cpus();
 
 	for_each_cpu(cpu, downed_cpus) {
 		err = cpu_down(cpu);
 		if (!err)
-			pr_info(NAME "CPU%d is down.\n", cpu);
+			pr_info("CPU%d is down.\n", cpu);
 		else
-			pr_err(NAME "Error taking CPU%d down: %d\n", cpu, err);
+			pr_err("Error taking CPU%d down: %d\n", cpu, err);
 	}
 out:
 	if (num_online_cpus() > 1)
-		pr_warning(NAME "multiple CPUs still online, "
-						"may miss events.\n");
+		pr_warning("multiple CPUs still online, may miss events.\n");
 }
 
 /* __ref because leave_uniprocessor calls cpu_up which is __cpuinit,
@@ -420,13 +419,13 @@ static void __ref leave_uniprocessor(void)
 
 	if (downed_cpus == NULL || cpumask_weight(downed_cpus) == 0)
 		return;
-	pr_notice(NAME "Re-enabling CPUs...\n");
+	pr_notice("Re-enabling CPUs...\n");
 	for_each_cpu(cpu, downed_cpus) {
 		err = cpu_up(cpu);
 		if (!err)
-			pr_info(NAME "enabled CPU%d.\n", cpu);
+			pr_info("enabled CPU%d.\n", cpu);
 		else
-			pr_err(NAME "cannot re-enable CPU%d: %d\n", cpu, err);
+			pr_err("cannot re-enable CPU%d: %d\n", cpu, err);
 	}
 }
 
@@ -434,8 +433,8 @@ static void __ref leave_uniprocessor(void)
 static void enter_uniprocessor(void)
 {
 	if (num_online_cpus() > 1)
-		pr_warning(NAME "multiple CPUs are online, may miss events. "
-			"Suggest booting with maxcpus=1 kernel argument.\n");
+		pr_warning("multiple CPUs are online, may miss events. "
+			   "Suggest booting with maxcpus=1 kernel argument.\n");
 }
 
 static void leave_uniprocessor(void)
@@ -450,13 +449,13 @@ void enable_mmiotrace(void)
 		goto out;
 
 	if (nommiotrace)
-		pr_info(NAME "MMIO tracing disabled.\n");
+		pr_info("MMIO tracing disabled.\n");
 	kmmio_init();
 	enter_uniprocessor();
 	spin_lock_irq(&trace_lock);
 	atomic_inc(&mmiotrace_enabled);
 	spin_unlock_irq(&trace_lock);
-	pr_info(NAME "enabled.\n");
+	pr_info("enabled.\n");
 out:
 	mutex_unlock(&mmiotrace_mutex);
 }
@@ -475,7 +474,7 @@ void disable_mmiotrace(void)
 	clear_trace_list(); /* guarantees: no more kmmio callbacks */
 	leave_uniprocessor();
 	kmmio_cleanup();
-	pr_info(NAME "disabled.\n");
+	pr_info("disabled.\n");
 out:
 	mutex_unlock(&mmiotrace_mutex);
 }
Signature · 1 line
1.6.6.rc0.57.gad7a
author maintainer
#15 lore raw

[tip:x86/urgent] x86: mmio-mod.c: Use pr_fmt

Commit-ID:  3a0340be06a9356eb61f6804107480acbe62c069
Gitweb:     http://git.kernel.org/tip/3a0340be06a9356eb61f6804107480acbe62c069
Author:     Joe Perches <[email protected]>
AuthorDate: Wed, 9 Dec 2009 10:45:37 -0800
Committer:  Ingo Molnar <[email protected]>
CommitDate: Thu, 10 Dec 2009 08:57:51 +0100

x86: mmio-mod.c: Use pr_fmt

- Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
- Remove #define NAME
- Remove NAME from pr_<level>

LKML-Reference: <009cb214c45ef932df0242856228f4739cc91408.1260383912.git.joe@perches.com>

---
 arch/x86/mm/mmio-mod.c |   71 +++++++++++++++++++++++------------------------
 1 files changed, 35 insertions(+), 36 deletions(-)
arch/x86/mm/mmio-mod.c +35 -36
index 132772a..4c765e9 100644
@@ -19,6 +19,9 @@
  *
  * Derived from the read-mod example from relay-examples by Tom Zanussi.
  */
+
+#define pr_fmt(fmt) "mmiotrace: "
+
 #define DEBUG 1
 
 #include <linux/module.h>
@@ -36,8 +39,6 @@
 
 #include "pf_in.h"
 
-#define NAME "mmiotrace: "
-
 struct trap_reason {
 	unsigned long addr;
 	unsigned long ip;
@@ -96,17 +97,18 @@ static void print_pte(unsigned long address)
 	pte_t *pte = lookup_address(address, &level);
 
 	if (!pte) {
-		pr_err(NAME "Error in %s: no pte for page 0x%08lx\n",
-							__func__, address);
+		pr_err("Error in %s: no pte for page 0x%08lx\n",
+		       __func__, address);
 		return;
 	}
 
 	if (level == PG_LEVEL_2M) {
-		pr_emerg(NAME "4MB pages are not currently supported: "
-							"0x%08lx\n", address);
+		pr_emerg("4MB pages are not currently supported: 0x%08lx\n",
+			 address);
 		BUG();
 	}
-	pr_info(NAME "pte for 0x%lx: 0x%llx 0x%llx\n", address,
+	pr_info("pte for 0x%lx: 0x%llx 0x%llx\n",
+		address,
 		(unsigned long long)pte_val(*pte),
 		(unsigned long long)pte_val(*pte) & _PAGE_PRESENT);
 }
@@ -118,22 +120,21 @@ static void print_pte(unsigned long address)
 static void die_kmmio_nesting_error(struct pt_regs *regs, unsigned long addr)
 {
 	const struct trap_reason *my_reason = &get_cpu_var(pf_reason);
-	pr_emerg(NAME "unexpected fault for address: 0x%08lx, "
-					"last fault for address: 0x%08lx\n",
-					addr, my_reason->addr);
+	pr_emerg("unexpected fault for address: 0x%08lx, last fault for address: 0x%08lx\n",
+		 addr, my_reason->addr);
 	print_pte(addr);
 	print_symbol(KERN_EMERG "faulting IP is at %s\n", regs->ip);
 	print_symbol(KERN_EMERG "last faulting IP was at %s\n", my_reason->ip);
 #ifdef __i386__
 	pr_emerg("eax: %08lx   ebx: %08lx   ecx: %08lx   edx: %08lx\n",
-			regs->ax, regs->bx, regs->cx, regs->dx);
+		 regs->ax, regs->bx, regs->cx, regs->dx);
 	pr_emerg("esi: %08lx   edi: %08lx   ebp: %08lx   esp: %08lx\n",
-			regs->si, regs->di, regs->bp, regs->sp);
+		 regs->si, regs->di, regs->bp, regs->sp);
 #else
 	pr_emerg("rax: %016lx   rcx: %016lx   rdx: %016lx\n",
-					regs->ax, regs->cx, regs->dx);
+		 regs->ax, regs->cx, regs->dx);
 	pr_emerg("rsi: %016lx   rdi: %016lx   rbp: %016lx   rsp: %016lx\n",
-				regs->si, regs->di, regs->bp, regs->sp);
+		 regs->si, regs->di, regs->bp, regs->sp);
 #endif
 	put_cpu_var(pf_reason);
 	BUG();
@@ -213,7 +214,7 @@ static void post(struct kmmio_probe *p, unsigned long condition,
 	/* this should always return the active_trace count to 0 */
 	my_reason->active_traces--;
 	if (my_reason->active_traces) {
-		pr_emerg(NAME "unexpected post handler");
+		pr_emerg("unexpected post handler");
 		BUG();
 	}
 
@@ -244,7 +245,7 @@ static void ioremap_trace_core(resource_size_t offset, unsigned long size,
 	};
 
 	if (!trace) {
-		pr_err(NAME "kmalloc failed in ioremap\n");
+		pr_err("kmalloc failed in ioremap\n");
 		return;
 	}
 
@@ -282,8 +283,8 @@ void mmiotrace_ioremap(resource_size_t offset, unsigned long size,
 	if (!is_enabled()) /* recheck and proper locking in *_core() */
 		return;
 
-	pr_debug(NAME "ioremap_*(0x%llx, 0x%lx) = %p\n",
-				(unsigned long long)offset, size, addr);
+	pr_debug("ioremap_*(0x%llx, 0x%lx) = %p\n",
+		 (unsigned long long)offset, size, addr);
 	if ((filter_offset) && (offset != filter_offset))
 		return;
 	ioremap_trace_core(offset, size, addr);
@@ -301,7 +302,7 @@ static void iounmap_trace_core(volatile void __iomem *addr)
 	struct remap_trace *tmp;
 	struct remap_trace *found_trace = NULL;
 
-	pr_debug(NAME "Unmapping %p.\n", addr);
+	pr_debug("Unmapping %p.\n", addr);
 
 	spin_lock_irq(&trace_lock);
 	if (!is_enabled())
@@ -363,9 +364,8 @@ static void clear_trace_list(void)
 	 * Caller also ensures is_enabled() cannot change.
 	 */
 	list_for_each_entry(trace, &trace_list, list) {
-		pr_notice(NAME "purging non-iounmapped "
-					"trace @0x%08lx, size 0x%lx.\n",
-					trace->probe.addr, trace->probe.len);
+		pr_notice("purging non-iounmapped trace @0x%08lx, size 0x%lx.\n",
+			  trace->probe.addr, trace->probe.len);
 		if (!nommiotrace)
 			unregister_kmmio_probe(&trace->probe);
 	}
@@ -387,7 +387,7 @@ static void enter_uniprocessor(void)
 
 	if (downed_cpus == NULL &&
 	    !alloc_cpumask_var(&downed_cpus, GFP_KERNEL)) {
-		pr_notice(NAME "Failed to allocate mask\n");
+		pr_notice("Failed to allocate mask\n");
 		goto out;
 	}
 
@@ -395,20 +395,19 @@ static void enter_uniprocessor(void)
 	cpumask_copy(downed_cpus, cpu_online_mask);
 	cpumask_clear_cpu(cpumask_first(cpu_online_mask), downed_cpus);
 	if (num_online_cpus() > 1)
-		pr_notice(NAME "Disabling non-boot CPUs...\n");
+		pr_notice("Disabling non-boot CPUs...\n");
 	put_online_cpus();
 
 	for_each_cpu(cpu, downed_cpus) {
 		err = cpu_down(cpu);
 		if (!err)
-			pr_info(NAME "CPU%d is down.\n", cpu);
+			pr_info("CPU%d is down.\n", cpu);
 		else
-			pr_err(NAME "Error taking CPU%d down: %d\n", cpu, err);
+			pr_err("Error taking CPU%d down: %d\n", cpu, err);
 	}
 out:
 	if (num_online_cpus() > 1)
-		pr_warning(NAME "multiple CPUs still online, "
-						"may miss events.\n");
+		pr_warning("multiple CPUs still online, may miss events.\n");
 }
 
 /* __ref because leave_uniprocessor calls cpu_up which is __cpuinit,
@@ -420,13 +419,13 @@ static void __ref leave_uniprocessor(void)
 
 	if (downed_cpus == NULL || cpumask_weight(downed_cpus) == 0)
 		return;
-	pr_notice(NAME "Re-enabling CPUs...\n");
+	pr_notice("Re-enabling CPUs...\n");
 	for_each_cpu(cpu, downed_cpus) {
 		err = cpu_up(cpu);
 		if (!err)
-			pr_info(NAME "enabled CPU%d.\n", cpu);
+			pr_info("enabled CPU%d.\n", cpu);
 		else
-			pr_err(NAME "cannot re-enable CPU%d: %d\n", cpu, err);
+			pr_err("cannot re-enable CPU%d: %d\n", cpu, err);
 	}
 }
 
@@ -434,8 +433,8 @@ static void __ref leave_uniprocessor(void)
 static void enter_uniprocessor(void)
 {
 	if (num_online_cpus() > 1)
-		pr_warning(NAME "multiple CPUs are online, may miss events. "
-			"Suggest booting with maxcpus=1 kernel argument.\n");
+		pr_warning("multiple CPUs are online, may miss events. "
+			   "Suggest booting with maxcpus=1 kernel argument.\n");
 }
 
 static void leave_uniprocessor(void)
@@ -450,13 +449,13 @@ void enable_mmiotrace(void)
 		goto out;
 
 	if (nommiotrace)
-		pr_info(NAME "MMIO tracing disabled.\n");
+		pr_info("MMIO tracing disabled.\n");
 	kmmio_init();
 	enter_uniprocessor();
 	spin_lock_irq(&trace_lock);
 	atomic_inc(&mmiotrace_enabled);
 	spin_unlock_irq(&trace_lock);
-	pr_info(NAME "enabled.\n");
+	pr_info("enabled.\n");
 out:
 	mutex_unlock(&mmiotrace_mutex);
 }
@@ -475,7 +474,7 @@ void disable_mmiotrace(void)
 	clear_trace_list(); /* guarantees: no more kmmio callbacks */
 	leave_uniprocessor();
 	kmmio_cleanup();
-	pr_info(NAME "disabled.\n");
+	pr_info("disabled.\n");
 out:
 	mutex_unlock(&mmiotrace_mutex);
 }
author maintainer
#16 lore raw

[tip:x86/urgent] arch/x86/kernel/microcode*: Use pr_fmt() and remove duplicated KERN_ERR prefix

In reply to Joe Perches
Commit-ID:  f58e1f53de52a70391b6478617311207c7203363
Gitweb:     http://git.kernel.org/tip/f58e1f53de52a70391b6478617311207c7203363
Author:     Joe Perches <[email protected]>
AuthorDate: Tue, 8 Dec 2009 22:30:50 -0800
Committer:  Ingo Molnar <[email protected]>
CommitDate: Wed, 9 Dec 2009 08:25:57 +0100

arch/x86/kernel/microcode*: Use pr_fmt() and remove duplicated KERN_ERR prefix

- Use #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
- Remove "microcode: " prefix from each pr_<level>
- Fix duplicated KERN_ERR prefix
- Coalesce pr_<level> format strings
- Add a space after an exclamation point

No other change in output.

Cc Andy Whitcroft <[email protected]>
Cc Andreas Herrmann <[email protected]>

LKML-Reference: <[email protected]>

---
 arch/x86/kernel/microcode_amd.c   |   40 +++++++++++++++----------------
 arch/x86/kernel/microcode_core.c  |   26 +++++++++++---------
 arch/x86/kernel/microcode_intel.c |   47 +++++++++++++++---------------------
 3 files changed, 53 insertions(+), 60 deletions(-)
arch/x86/kernel/microcode_amd.c +19 -21
index 63123d9..37542b6 100644
@@ -13,6 +13,9 @@
  *  Licensed under the terms of the GNU General Public
  *  License version 2. See file COPYING for details.
  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/firmware.h>
 #include <linux/pci_ids.h>
 #include <linux/uaccess.h>
@@ -81,7 +84,7 @@ static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig)
 
 	memset(csig, 0, sizeof(*csig));
 	rdmsr(MSR_AMD64_PATCH_LEVEL, csig->rev, dummy);
-	pr_info("microcode: CPU%d: patch_level=0x%x\n", cpu, csig->rev);
+	pr_info("CPU%d: patch_level=0x%x\n", cpu, csig->rev);
 	return 0;
 }
 
@@ -111,8 +114,8 @@ static int get_matching_microcode(int cpu, void *mc, int rev)
 
 	/* ucode might be chipset specific -- currently we don't support this */
 	if (mc_header->nb_dev_id || mc_header->sb_dev_id) {
-		pr_err(KERN_ERR "microcode: CPU%d: loading of chipset "
-		       "specific code not yet supported\n", cpu);
+		pr_err("CPU%d: loading of chipset specific code not yet supported\n",
+		       cpu);
 		return 0;
 	}
 
@@ -141,12 +144,12 @@ static int apply_microcode_amd(int cpu)
 
 	/* check current patch id and patch's id for match */
 	if (rev != mc_amd->hdr.patch_id) {
-		pr_err("microcode: CPU%d: update failed "
-		       "(for patch_level=0x%x)\n", cpu, mc_amd->hdr.patch_id);
+		pr_err("CPU%d: update failed (for patch_level=0x%x)\n",
+		       cpu, mc_amd->hdr.patch_id);
 		return -1;
 	}
 
-	pr_info("microcode: CPU%d: updated (new patch_level=0x%x)\n", cpu, rev);
+	pr_info("CPU%d: updated (new patch_level=0x%x)\n", cpu, rev);
 	uci->cpu_sig.rev = rev;
 
 	return 0;
@@ -169,15 +172,14 @@ get_next_ucode(const u8 *buf, unsigned int size, unsigned int *mc_size)
 		return NULL;
 
 	if (section_hdr[0] != UCODE_UCODE_TYPE) {
-		pr_err("microcode: error: invalid type field in "
-		       "container file section header\n");
+		pr_err("error: invalid type field in container file section header\n");
 		return NULL;
 	}
 
 	total_size = (unsigned long) (section_hdr[4] + (section_hdr[5] << 8));
 
 	if (total_size > size || total_size > UCODE_MAX_SIZE) {
-		pr_err("microcode: error: size mismatch\n");
+		pr_err("error: size mismatch\n");
 		return NULL;
 	}
 
@@ -206,14 +208,13 @@ static int install_equiv_cpu_table(const u8 *buf)
 	size = buf_pos[2];
 
 	if (buf_pos[1] != UCODE_EQUIV_CPU_TABLE_TYPE || !size) {
-		pr_err("microcode: error: invalid type field in "
-		       "container file section header\n");
+		pr_err("error: invalid type field in container file section header\n");
 		return 0;
 	}
 
 	equiv_cpu_table = (struct equiv_cpu_entry *) vmalloc(size);
 	if (!equiv_cpu_table) {
-		pr_err("microcode: failed to allocate equivalent CPU table\n");
+		pr_err("failed to allocate equivalent CPU table\n");
 		return 0;
 	}
 
@@ -246,7 +247,7 @@ generic_load_microcode(int cpu, const u8 *data, size_t size)
 
 	offset = install_equiv_cpu_table(ucode_ptr);
 	if (!offset) {
-		pr_err("microcode: failed to create equivalent cpu table\n");
+		pr_err("failed to create equivalent cpu table\n");
 		return UCODE_ERROR;
 	}
 
@@ -277,8 +278,7 @@ generic_load_microcode(int cpu, const u8 *data, size_t size)
 		if (!leftover) {
 			vfree(uci->mc);
 			uci->mc = new_mc;
-			pr_debug("microcode: CPU%d found a matching microcode "
-				 "update with version 0x%x (current=0x%x)\n",
+			pr_debug("CPU%d found a matching microcode update with version 0x%x (current=0x%x)\n",
 				 cpu, new_rev, uci->cpu_sig.rev);
 		} else {
 			vfree(new_mc);
@@ -300,7 +300,7 @@ static enum ucode_state request_microcode_fw(int cpu, struct device *device)
 		return UCODE_NFOUND;
 
 	if (*(u32 *)firmware->data != UCODE_MAGIC) {
-		pr_err("microcode: invalid UCODE_MAGIC (0x%08x)\n",
+		pr_err("invalid UCODE_MAGIC (0x%08x)\n",
 		       *(u32 *)firmware->data);
 		return UCODE_ERROR;
 	}
@@ -313,8 +313,7 @@ static enum ucode_state request_microcode_fw(int cpu, struct device *device)
 static enum ucode_state
 request_microcode_user(int cpu, const void __user *buf, size_t size)
 {
-	pr_info("microcode: AMD microcode update via "
-		"/dev/cpu/microcode not supported\n");
+	pr_info("AMD microcode update via /dev/cpu/microcode not supported\n");
 	return UCODE_ERROR;
 }
 
@@ -334,14 +333,13 @@ void init_microcode_amd(struct device *device)
 	WARN_ON(c->x86_vendor != X86_VENDOR_AMD);
 
 	if (c->x86 < 0x10) {
-		pr_warning("microcode: AMD CPU family 0x%x not supported\n",
-			   c->x86);
+		pr_warning("AMD CPU family 0x%x not supported\n", c->x86);
 		return;
 	}
 	supported_cpu = 1;
 
 	if (request_firmware(&firmware, fw_name, device))
-		pr_err("microcode: failed to load file %s\n", fw_name);
+		pr_err("failed to load file %s\n", fw_name);
 }
 
 void fini_microcode_amd(void)
arch/x86/kernel/microcode_core.c +14 -12
index e68aae3..844c02c 100644
@@ -70,6 +70,9 @@
  *		Fix sigmatch() macro to handle old CPUs with pf == 0.
  *		Thanks to Stuart Swales for pointing out this bug.
  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/platform_device.h>
 #include <linux/miscdevice.h>
 #include <linux/capability.h>
@@ -209,7 +212,7 @@ static ssize_t microcode_write(struct file *file, const char __user *buf,
 	ssize_t ret = -EINVAL;
 
 	if ((len >> PAGE_SHIFT) > totalram_pages) {
-		pr_err("microcode: too much data (max %ld pages)\n", totalram_pages);
+		pr_err("too much data (max %ld pages)\n", totalram_pages);
 		return ret;
 	}
 
@@ -244,7 +247,7 @@ static int __init microcode_dev_init(void)
 
 	error = misc_register(&microcode_dev);
 	if (error) {
-		pr_err("microcode: can't misc_register on minor=%d\n", MICROCODE_MINOR);
+		pr_err("can't misc_register on minor=%d\n", MICROCODE_MINOR);
 		return error;
 	}
 
@@ -359,7 +362,7 @@ static enum ucode_state microcode_resume_cpu(int cpu)
 	if (!uci->mc)
 		return UCODE_NFOUND;
 
-	pr_debug("microcode: CPU%d updated upon resume\n", cpu);
+	pr_debug("CPU%d updated upon resume\n", cpu);
 	apply_microcode_on_target(cpu);
 
 	return UCODE_OK;
@@ -379,7 +382,7 @@ static enum ucode_state microcode_init_cpu(int cpu)
 	ustate = microcode_ops->request_microcode_fw(cpu, &microcode_pdev->dev);
 
 	if (ustate == UCODE_OK) {
-		pr_debug("microcode: CPU%d updated upon init\n", cpu);
+		pr_debug("CPU%d updated upon init\n", cpu);
 		apply_microcode_on_target(cpu);
 	}
 
@@ -406,7 +409,7 @@ static int mc_sysdev_add(struct sys_device *sys_dev)
 	if (!cpu_online(cpu))
 		return 0;
 
-	pr_debug("microcode: CPU%d added\n", cpu);
+	pr_debug("CPU%d added\n", cpu);
 
 	err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group);
 	if (err)
@@ -425,7 +428,7 @@ static int mc_sysdev_remove(struct sys_device *sys_dev)
 	if (!cpu_online(cpu))
 		return 0;
 
-	pr_debug("microcode: CPU%d removed\n", cpu);
+	pr_debug("CPU%d removed\n", cpu);
 	microcode_fini_cpu(cpu);
 	sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
 	return 0;
@@ -473,15 +476,15 @@ mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu)
 		microcode_update_cpu(cpu);
 	case CPU_DOWN_FAILED:
 	case CPU_DOWN_FAILED_FROZEN:
-		pr_debug("microcode: CPU%d added\n", cpu);
+		pr_debug("CPU%d added\n", cpu);
 		if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group))
-			pr_err("microcode: Failed to create group for CPU%d\n", cpu);
+			pr_err("Failed to create group for CPU%d\n", cpu);
 		break;
 	case CPU_DOWN_PREPARE:
 	case CPU_DOWN_PREPARE_FROZEN:
 		/* Suspend is in progress, only remove the interface */
 		sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
-		pr_debug("microcode: CPU%d removed\n", cpu);
+		pr_debug("CPU%d removed\n", cpu);
 		break;
 	case CPU_DEAD:
 	case CPU_UP_CANCELED_FROZEN:
@@ -507,7 +510,7 @@ static int __init microcode_init(void)
 		microcode_ops = init_amd_microcode();
 
 	if (!microcode_ops) {
-		pr_err("microcode: no support for this CPU vendor\n");
+		pr_err("no support for this CPU vendor\n");
 		return -ENODEV;
 	}
 
@@ -541,8 +544,7 @@ static int __init microcode_init(void)
 	register_hotcpu_notifier(&mc_cpu_notifier);
 
 	pr_info("Microcode Update Driver: v" MICROCODE_VERSION
-	       " <[email protected]>,"
-	       " Peter Oruba\n");
+		" <[email protected]>, Peter Oruba\n");
 
 	return 0;
 }
arch/x86/kernel/microcode_intel.c +20 -27

129 lines not on this page · raw message

author maintainer
#17 lore raw

PATCH 1/1 checkpatch.pl: Warn on pr_<level> or dev_<level> with KERN_<level>

In reply to Ingo Molnar
Quoted 3 lines · Ingo Molnar

( Andy: i suspect checkpatch could also grow a new warning perhaps, the
'\<pr_.*(KERN_.*' pattern will i suspect pinpoint something fishy in most cases. )

---

scripts/checkpatch.pl +6 -0
index bc4114f..ffd8210 100755
@@ -1832,6 +1832,12 @@ sub process {
 			}
 		}
 
+# pr_<level> and dev_<level> should not use KERN_* levels
+
+		if ($line =~ /\b(pr_|dev_)[a-z]+.*KERN_/) {
+			WARN("pr_<level>() and dev_<level> should not include KERN_ facility level\n" . $herecurr);
+		}
+
 # function brace can't be on same line, except for #defines of do while,
 # or if closed on same line
 		if (($line=~/$Type\s*$Ident\(.*\).*\s{/) and
#18 lore raw

Re: [PATCH] checkpatch.pl: Warn on pr_<level> or dev_<level> with KERN_<level>

Quoted 12 lines · Joe Perches
Quoted 3 lines · Ingo Molnar

( Andy: i suspect checkpatch could also grow a new warning perhaps, the
'\<pr_.*(KERN_.*' pattern will i suspect pinpoint something fishy in most cases. )

---

scripts/checkpatch.pl +0 -0
index bc4114f..ffd8210 100755

scripts/checkpatch.pl sub process { · line 1837

Quoted 6 lines
scripts/checkpatch.pl +3 -0
@@ -1832,6 +1832,12 @@ sub process {
 			}
 		}
 
+# pr_<level> and dev_<level> should not use KERN_* levels
+
+		if ($line =~ /\b(pr_|dev_)[a-z]+.*KERN_/) {

putting \( into the pattern would further reduce the chance of false positives.

Ingo