Skip to contentSkip to conversation

net: sh_eth alignment fix for sh7724 using NET_IP_ALIGN V2

PATCH Applied Magnus Damm 2 participants 2 messages Dec 15, 2009 – Dec 16, 2009

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 net: sh_eth alignment fix for sh7724 using NET_IP_ALIGN V2

From: Magnus Damm <[email protected]>

Fix sh_eth for sh7724 by adding NET_IP_ALIGN support V2. Without this patch the receive data is misaligned.

---

Thanks to Dave Miller for feedback!
Tested on sh7724 / Ecovec24.

Changes since V1:
- dropped #ifdef around sh7724 .rpadir and .rpadir_value
- removed sh7763 .rpadir

 drivers/net/sh_eth.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/net/sh_eth.c +6 -1
@@ -84,6 +84,8 @@ static struct sh_eth_cpu_data sh_eth_my_
 	.mpr		= 1,
 	.tpauser	= 1,
 	.hw_swap	= 1,
+	.rpadir		= 1,
+	.rpadir_value	= 0x00020000, /* NET_IP_ALIGN assumed to be 2 */
 };
 
 #elif defined(CONFIG_CPU_SUBTYPE_SH7763)
@@ -175,7 +177,6 @@ static struct sh_eth_cpu_data sh_eth_my_
 	.tpauser	= 1,
 	.bculr		= 1,
 	.hw_swap	= 1,
-	.rpadir		= 1,
 	.no_trimd	= 1,
 	.no_ade		= 1,
 };
@@ -501,6 +502,8 @@ static int sh_eth_ring_init(struct net_d
 	 */
 	mdp->rx_buf_sz = (ndev->mtu <= 1492 ? PKT_BUF_SZ :
 			  (((ndev->mtu + 26 + 7) & ~7) + 2 + 16));
+	if (mdp->cd->rpadir)
+		mdp->rx_buf_sz += NET_IP_ALIGN;
 
 	/* Allocate RX and TX skb rings */
 	mdp->rx_skbuff = kmalloc(sizeof(*mdp->rx_skbuff) * RX_RING_SIZE,
@@ -715,6 +718,8 @@ static int sh_eth_rx(struct net_device *
 					pkt_len + 2);
 			skb = mdp->rx_skbuff[entry];
 			mdp->rx_skbuff[entry] = NULL;
+			if (mdp->cd->rpadir)
+				skb_reserve(skb, NET_IP_ALIGN);
 			skb_put(skb, pkt_len);
 			skb->protocol = eth_type_trans(skb, ndev);
 			netif_rx(skb);