sdhci: add support for the SysKonnect CardBus2SDIO adapter
PATCH 175/196 sdhci: add support for the SysKonnect CardBus2SDIO adapter
From: Nicolas Pitre <[email protected]>
This is still in use especially to develop SDIO device drivers on laptop machines which are lacking SDIO slots. This adapter supports SDIO cards only due to lack of 136-bit response capability.
Signed-off-by Nicolas Pitre <[email protected]>
Cc <[email protected]>
Signed-off-by Andrew Morton <[email protected]>
---
drivers/mmc/host/sdhci-pci.c | 75 +++++++++++++++++++++++++++++++++ 1 file changed, 75 insertions(+)
drivers/mmc/host/sdhci-pci.c renamed from drivers/mmc/host/sdhci-pci.c~sdhci-add-support-for-the-syskonnect-cardbus2sdio-adapter +75 -0
@@ -285,6 +285,73 @@ static const struct sdhci_pci_fixes sdhc .resume = jmicron_resume, }; +/* SysKonnect CardBus2SDIO extra registers */ +#define SYSKT_CTRL 0x200 +#define SYSKT_RDFIFO_STAT 0x204 +#define SYSKT_WRFIFO_STAT 0x208 +#define SYSKT_POWER_DATA 0x20c +#define SYSKT_POWER_330 0xef +#define SYSKT_POWER_300 0xf8 +#define SYSKT_POWER_184 0xcc +#define SYSKT_POWER_CMD 0x20d +#define SYSKT_POWER_START (1 << 7) +#define SYSKT_POWER_STATUS 0x20e +#define SYSKT_POWER_STATUS_OK (1 << 0) +#define SYSKT_BOARD_REV 0x210 +#define SYSKT_CHIP_REV 0x211 +#define SYSKT_CONF_DATA 0x212 +#define SYSKT_CONF_DATA_1V8 (1 << 2) +#define SYSKT_CONF_DATA_2V5 (1 << 1) +#define SYSKT_CONF_DATA_3V3 (1 << 0) + +static int syskt_probe (struct sdhci_pci_chip *chip) +{ +if ((chip->pdev->class &0x0000FF ) ==PCI_SDHCI_IFVENDOR ) { + chip->pdev->class &= ~0x0000FF ; + chip->pdev->class |=PCI_SDHCI_IFDMA ; + } +return 0 ; +} + +static int syskt_probe_slot (struct sdhci_pci_slot *slot) +{ +int tm, ps; + +u8 board_rev =readb (slot->host->ioaddr +SYSKT_BOARD_REV ); +u8 chip_rev =readb (slot->host->ioaddr +SYSKT_CHIP_REV ); +dev_info (&slot->chip->pdev->dev,"SysKonnect CardBus2SDIO, " +"board rev %d.%d, chip rev %d.%d\n" , + board_rev >>4 , board_rev &0xf , + chip_rev >>4 , chip_rev &0xf ); +if (chip_rev >=0x20 ) + slot->host->quirks |=SDHCI_QUIRK_FORCE_DMA ; + +writeb (SYSKT_POWER_330 , slot->host->ioaddr +SYSKT_POWER_DATA ); +writeb (SYSKT_POWER_START , slot->host->ioaddr +SYSKT_POWER_CMD ); +udelay (50 ); + tm =10 ;/* Wait max 1 ms */ +do { + ps =readw (slot->host->ioaddr +SYSKT_POWER_STATUS ); +if (ps &SYSKT_POWER_STATUS_OK ) +break ; +udelay (100 ); + }while (--tm); +if (!tm) { +dev_err (&slot->chip->pdev->dev, +"power regulator never stabilized" ); +writeb (0 , slot->host->ioaddr +SYSKT_POWER_CMD ); +return -ENODEV ; + } + +return 0 ; +} + +static const struct sdhci_pci_fixes sdhci_syskt = { + .quirks =SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER , + .probe = syskt_probe, + .probe_slot = syskt_probe_slot, +}; +static int via_probe (struct sdhci_pci_chip *chip) {if (chip->pdev->revision ==0x10 )
@@ -363,6 +430,14 @@ static const struct pci_device_id pci_id }, { + .vendor = PCI_VENDOR_ID_SYSKONNECT, + .device = 0x8000, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_syskt, + }, + + { .vendor = PCI_VENDOR_ID_VIA, .device = 0x95d0, .subvendor = PCI_ANY_ID,
_