mmc: Blackfin SD Host Controller Driver
PATCH 180/196 mmc: Blackfin SD Host Controller Driver
From: Cliff Cai <[email protected]>
Add SD host driver for Blackfin BF54x and BF51x.
[[email protected]: fix layout, c99 warning]
Signed-off-by Cliff Cai <[email protected]>
Signed-off-by Bryan Wu <[email protected]>
Signed-off-by Mike Frysinger <[email protected]>
Cc <[email protected]>
Signed-off-by Andrew Morton <[email protected]>
---
drivers/mmc/host/Kconfig | 19 + drivers/mmc/host/Makefile | 1 drivers/mmc/host/bfin_sdh.c | 639 ++++++++++++++++++++++++++++++++++ 3 files changed, 659 insertions(+)
drivers/mmc/host/Kconfig renamed from drivers/mmc/host/Kconfig~blackfin-sd-host-controller-driver +19 -0
@@ -365,3 +365,22 @@ config MMC_VIA_SDMMC If you have a controller with this interface, say Y or M here. If unsure, say N. + +config SDH_BFIN + tristate "Blackfin Secure Digital Host support" + depends on MMC && ((BF54x && !BF544) || (BF51x && !BF512)) + help + If you say yes here you will get support for the Blackfin on-chip + Secure Digital Host interface. This includes support for MMC and + SD cards. + + To compile this driver as a module, choose M here: the + module will be called bfin_sdh. + + If unsure, say N. + +config SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND + bool "Blackfin EZkit Missing SDH_CMD Pull Up Resistor Workaround" + depends on SDH_BFIN + help + If you say yes here SD-Cards may work on the EZkit.
drivers/mmc/host/Makefile renamed from drivers/mmc/host/Makefile~blackfin-sd-host-controller-driver +1 -0
@@ -35,6 +35,7 @@ obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_ obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o obj-$(CONFIG_MMC_CB710) += cb710-mmc.o obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o +obj-$(CONFIG_SDH_BFIN) += bfin_sdh.o ifeq ($(CONFIG_CB710_DEBUG),y) CFLAGS-cb710-mmc += -DDEBUG
drivers/mmc/host/bfin_sdh.c new file +639 -0
639 lines not on this page · raw message
_