OMAP OPP: remove some unnecessary variables
A message that is not in the archive (sent off-list or not yet received): [email protected]
Paul Walmsley
maintainerPATCH 1/12 OMAP OPP: remove some unnecessary variables
No need to allocate new variables; the passed-in OPP list pointers do nicely as iterators.
--- arch/arm/plat-omap/include/plat/opp.h | 2 + arch/arm/plat-omap/opp.c | 52 +++++++++++++++------------------ 2 files changed, 24 insertions(+), 30 deletions(-)
arch/arm/plat-omap/include/plat/opp.h +1 -1
@@ -60,7 +60,7 @@ unsigned long opp_get_freq(const struct omap_opp *opp);* This functions returns the number of opps if there are any OPPs enabled, * else returns corresponding error value. */ -int opp_get_opp_count (const struct omap_opp *oppl); +int opp_get_opp_count (struct omap_opp *oppl);/** * opp_find_freq_exact() - search for an exact frequency
arch/arm/plat-omap/opp.c +23 -29
98 lines not on this page · raw message
Quoted 2 lines · Paul Walmsley
No need to allocate new variables; the passed-in OPP list pointers do nicely as iterators.
Thanks Paul for this series. I totally agree with the cleanups you've done.
I've rebased this on top of my current pm-wip-opp branch and will include it in the next push of that branch for broader use and testing.
Kevin
Paul Walmsley
maintainerPATCH 2/12 OMAP OPP: split opp_find_freq_approx() into opp_find_freq_{floor, ceil}()
In reply to a message not in the archiveSplit opp_find_freq_approx() into opp_find_freq_{floor,ceil}(). This seems more readable.
--- arch/arm/mach-omap2/clock34xx.c | 3 - arch/arm/mach-omap2/resource34xx.c | 8 +--- arch/arm/plat-omap/cpu-omap.c | 3 - arch/arm/plat-omap/include/plat/opp.h | 67 +++++++++++++++++++-------------- arch/arm/plat-omap/opp.c | 52 +++++++++++++++++++++----- 5 files changed, 86 insertions(+), 47 deletions(-)
arch/arm/mach-omap2/clock34xx.c +1 -2
@@ -293,8 +293,7 @@ void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)return ; } -while (!IS_ERR (opp =opp_find_freq_approx (opp, &freq, -OPP_SEARCH_LOW ))) { +while (!IS_ERR (opp =opp_find_freq_floor (opp, &freq))) { freq_table[i].index = i; freq_table[i].frequency = freq /1000 ; i++;
arch/arm/mach-omap2/resource34xx.c +3 -5
@@ -207,7 +207,7 @@ static int __deprecated freq_to_opp(u8 *opp_id, struct omap_opp *opps,struct omap_opp *opp;BUG_ON (!opp_id || !opps); - opp =opp_find_freq_approx (opps, &freq,OPP_SEARCH_HIGH ); + opp =opp_find_freq_ceil (opps, &freq);if (IS_ERR (opp))return -EINVAL ; *opp_id = opp->opp_id;
@@ -476,13 +476,11 @@ int set_opp(struct shared_resource *resp, u32 target_level) req_l3_freq = (target_level *1000 )/4 ;/* Do I have a best match? */ - oppx =opp_find_freq_approx (l3_opps, &req_l3_freq, -OPP_SEARCH_HIGH ); + oppx =opp_find_freq_ceil (l3_opps, &req_l3_freq);if (IS_ERR (oppx)) {/* Give me the best we got */ req_l3_freq =ULONG_MAX ; - oppx =opp_find_freq_approx (l3_opps, - &req_l3_freq,OPP_SEARCH_LOW ); + oppx =opp_find_freq_floor (l3_opps, &req_l3_freq); }/* uh uh.. no OPPs?? */
arch/arm/plat-omap/cpu-omap.c +1 -2
@@ -112,8 +112,7 @@ static int omap_target(struct cpufreq_policy *policy,#elif defined(CONFIG_ARCH_OMAP3 ) && !defined(CONFIG_OMAP_PM_NONE )if (mpu_opps) {unsigned long freq = target_freq *1000 ; -if (!IS_ERR (opp_find_freq_approx (mpu_opps, &freq, -OPP_SEARCH_HIGH ))) +if (!IS_ERR (opp_find_freq_ceil (mpu_opps, &freq)))omap_pm_cpu_set_freq (freq); }#endif
arch/arm/plat-omap/include/plat/opp.h +39 -28
100 lines not on this page · raw message
arch/arm/plat-omap/opp.c +42 -10
75 lines not on this page · raw message
Paul Walmsley
maintainerPATCH 3/12 OMAP OPP: only traverse opp_find_freq_floor() once
In reply to a message not in the archiveThere's no point traversing the OPP list twice in opp_find_freq_floor().
--- arch/arm/plat-omap/opp.c | 30 +++++++++++++----------------- 1 files changed, 13 insertions(+), 17 deletions(-)
arch/arm/plat-omap/opp.c +13 -17
@@ -126,36 +126,32 @@ struct omap_opp *opp_find_freq_ceil(struct omap_opp *oppl, unsigned long *freq)struct omap_opp *opp_find_freq_floor (struct omap_opp *oppl,unsigned long *freq) { +struct omap_opp *prev_opp = oppl; +if (unlikely (!oppl ||IS_ERR (oppl) || !freq ||IS_ERR (freq))) {pr_err ("%s: Invalid parameters being passed\n" , __func__);return ERR_PTR (-EINVAL ); }/* skip initial terminator */ -if (OPP_TERM (oppl)) { +if (OPP_TERM (oppl)) oppl++; -/* If searching init list for a high val, skip to very top */ -/* -* XXX What is the point of this? If one is going to traverse -* the list, might as well do what we need to do during the -* traversal. -*/ -while (!OPP_TERM (oppl))/* XXX above */ - oppl++; - } -while (!OPP_TERM (--oppl)) { -if (!oppl->enabled) -continue ; +while (!OPP_TERM (oppl)) { +if (oppl->enabled) { +if (oppl->rate > *freq) +break ; -if (oppl->rate <= *freq) -break ; + prev_opp = oppl; + } + + oppl++; } -if (OPP_TERM (oppl)) +if (prev_opp->rate > *freq)return ERR_PTR (-ENOENT ); - *freq = oppl->rate; + *freq = prev_opp->rate;return oppl; }
Re: [PATCH 03/12] OMAP OPP: only traverse opp_find_freq_floor() once
Paul Walmsley said the following on 12/18/2009 06:17 AM:
Quoted 52 lines
There's no point traversing the OPP list twice in
opp_find_freq_floor().--- arch/arm/plat-omap/opp.c | 30 +++++++++++++----------------- 1 files changed, 13 insertions(+), 17 deletions(-)arch/arm/plat-omap/opp.c +11
-15@@ -126,36 +126,32 @@ struct omap_opp *opp_find_freq_ceil(struct omap_opp *oppl, unsigned long *freq)struct omap_opp *opp_find_freq_floor (struct omap_opp *oppl,unsigned long *freq) { +struct omap_opp *prev_opp = oppl; +if (unlikely (!oppl ||IS_ERR (oppl) || !freq ||IS_ERR (freq))) {pr_err ("%s: Invalid parameters being passed\n" , __func__);return ERR_PTR (-EINVAL ); }/* skip initial terminator */ -if (OPP_TERM (oppl)) { +if (OPP_TERM (oppl)) oppl++; -/* If searching init list for a high val, skip to very top */ -/* -* XXX What is the point of this? If one is going to traverse -* the list, might as well do what we need to do during the -* traversal. -*/ -while (!OPP_TERM (oppl))/* XXX above */ - oppl++; - } -while (!OPP_TERM (--oppl)) { -if (!oppl->enabled) -continue ; +while (!OPP_TERM (oppl)) { +if (oppl->enabled) { +if (oppl->rate > *freq) +break ; -if (oppl->rate <= *freq) -break ; + prev_opp = oppl; + } + + oppl++; }
arch/arm/plat-omap/opp.c struct omap_opp *opp_find_freq_ceil(struct omap_opp *oppl, unsigned long *freq) · line 157
Quoted 10 lines
arch/arm/plat-omap/opp.c +2
-2-if (OPP_TERM (oppl)) +if (prev_opp->rate > *freq)return ERR_PTR (-ENOENT ); - *freq = oppl->rate; + *freq = prev_opp->rate;return oppl; }
Nice. thanks.
Regards,
Nishanth Menon
Paul Walmsley
maintainerPATCH 4/12 OMAP TWL/TPS OPP: move TWL/TPS-specific code to its own file
In reply to a message not in the archiveThe OPP layer code should be independent of the PMIC, so move the TWL/TPS-specific code out to its own file.
--- arch/arm/plat-omap/Makefile | 4 ++- arch/arm/plat-omap/include/plat/opp_twl_tps.h | 21 ++++++++++++++ arch/arm/plat-omap/opp.c | 27 +++--------------- arch/arm/plat-omap/opp_twl_tps.c | 38 +++++++++++++++++++++++++ 4 files changed, 66 insertions(+), 24 deletions(-) create mode 100644 arch/arm/plat-omap/include/plat/opp_twl_tps.h create mode 100644 arch/arm/plat-omap/opp_twl_tps.c
arch/arm/plat-omap/Makefile +3 -1
@@ -13,7 +13,9 @@ obj- := obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o # OPP support in (OMAP3+ only at the moment) -obj-$(CONFIG_ARCH_OMAP3) += opp.o +# XXX The OPP TWL/TPS code should only be included when a TWL/TPS +# PMIC is selected. +obj-$(CONFIG_ARCH_OMAP3) += opp.o opp_twl_tps.o # omap_device support (OMAP2+ only at the moment) obj-$(CONFIG_ARCH_OMAP2) += omap_device.o
arch/arm/plat-omap/include/plat/opp_twl_tps.h new file +21 -0
@@ -0,0 +1,21 @@ +/* +* opp_twl_tps.h - TWL/TPS-specific headers for the OPP code +* +* Copyright (C) 2009 Texas Instruments Incorporated. +* Nishanth Menon +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +* XXX This code belongs as part of some other TWL/TPS code. +*/ +#ifndef _ARCH_ARM_PLAT_OMAP_OPP_TWL_TPS_H +#define _ARCH_ARM_PLAT_OMAP_OPP_TWL_TPS_H + +#include <linux/kernel.h> + +unsigned long omap_twl_vsel_to_uv (const u8 vsel); +u8 omap_twl_uv_to_vsel (unsigned long uV); + +#endif
arch/arm/plat-omap/opp.c +4 -23
@@ -15,6 +15,7 @@#include <linux/init.h> #include <linux/slab.h> +#include <plat/opp_twl_tps.h> #include <plat/opp.h> /*
@@ -24,33 +25,13 @@*/ #define OPP_TERM (opp) (!(opp)->rate && !(opp)->vsel && !(opp)->enabled) -/* -* DEPRECATED: Meant to convert vsel value to uVolt -* This is meant to help co-exist with current SRF etc -* TODO: REMOVE! -*/ -static inline unsigned long vsel_to_uv (const u8 vsel) -{ -return (((vsel *125 ) +6000 )) *100 ; -} - -/* -* DEPRECATED: Meant to convert uVolt to vsel value -* This is meant to help co-exist with current SRF etc -* TODO: REMOVE! -*/ -static inline unsigned char uv_to_vsel (unsigned long uV) -{ -return ((uV /100 ) -6000 ) /125 ; -} -unsigned long opp_get_voltage (const struct omap_opp *opp) {if (unlikely (!opp ||IS_ERR (opp)) || !opp->enabled) {pr_err ("%s: Invalid parameters being passed\n" , __func__);return 0 ; } -return vsel_to_uv (opp->vsel); +return omap_twl_vsel_to_uv (opp->vsel); }unsigned long opp_get_freq (const struct omap_opp *opp)
@@ -162,9 +143,9 @@ static void omap_opp_populate(struct omap_opp *opp, { opp->rate = opp_def->freq; opp->enabled = opp_def->enabled; - opp->vsel =uv_to_vsel (opp_def->u_volt); + opp->vsel =omap_twl_uv_to_vsel (opp_def->u_volt);/* round off to higher voltage */ -if (opp_def->u_volt >vsel_to_uv (opp->vsel)) +if (opp_def->u_volt >omap_twl_vsel_to_uv (opp->vsel)) opp->vsel++; }
arch/arm/plat-omap/opp_twl_tps.c new file +38 -0
@@ -0,0 +1,38 @@ +/* +* opp_twl_tps.c - TWL/TPS-specific functions for the OPP code +* +* Copyright (C) 2009 Texas Instruments Incorporated. +* Nishanth Menon +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +* XXX This code should be part of some other TWL/TPS code. +*/ + +#include <plat/opp_twl_tps.h> + +/** +* omap_twl_vsel_to_vdc - convert TWL/TPS VSEL value to microvolts DC +* @vsel: TWL/TPS VSEL value to convert +* +* Returns the microvolts DC that the TWL/TPS family of PMICs should +* generate when programmed with @vsel. +*/ +unsigned long omap_twl_vsel_to_uv (const u8 vsel) +{ +return (((vsel *125 ) +6000 )) *100 ; +} + +/** +* omap_twl_uv_to_vsel - convert microvolts DC to TWL/TPS VSEL value +* @uv: microvolts DC to convert +* +* Returns the VSEL value necessary for the TWL/TPS family of PMICs to +* generate an output voltage equal to or greater than @uv microvolts DC. +*/ +u8 omap_twl_uv_to_vsel (unsigned long uv) +{ +return ((uv /100 ) -6000 ) /125 ; +}
Re: [PATCH 04/12] OMAP TWL/TPS OPP: move TWL/TPS-specific code to its own file
Paul Walmsley said the following on 12/18/2009 06:17 AM:
Quoted 146 lines
The OPP layer code should be independent of the PMIC, so move the TWL/TPS-specific code out to its own file.
--- arch/arm/plat-omap/Makefile | 4 ++- arch/arm/plat-omap/include/plat/opp_twl_tps.h | 21 ++++++++++++++ arch/arm/plat-omap/opp.c | 27 +++--------------- arch/arm/plat-omap/opp_twl_tps.c | 38 +++++++++++++++++++++++++ 4 files changed, 66 insertions(+), 24 deletions(-) create mode 100644 arch/arm/plat-omap/include/plat/opp_twl_tps.h create mode 100644 arch/arm/plat-omap/opp_twl_tps.carch/arm/plat-omap/Makefile +3
-1@@ -13,7 +13,9 @@ obj- := obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o # OPP support in (OMAP3+ only at the moment) -obj-$(CONFIG_ARCH_OMAP3) += opp.o +# XXX The OPP TWL/TPS code should only be included when a TWL/TPS +# PMIC is selected. +obj-$(CONFIG_ARCH_OMAP3) += opp.o opp_twl_tps.o # omap_device support (OMAP2+ only at the moment) obj-$(CONFIG_ARCH_OMAP2) += omap_device.oarch/arm/plat-omap/include/plat/opp_twl_tps.h new file +21
-0@@ -0,0 +1,21 @@ +/* +* opp_twl_tps.h - TWL/TPS-specific headers for the OPP code +* +* Copyright (C) 2009 Texas Instruments Incorporated. +* Nishanth Menon +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +* XXX This code belongs as part of some other TWL/TPS code. +*/ +#ifndef _ARCH_ARM_PLAT_OMAP_OPP_TWL_TPS_H +#define _ARCH_ARM_PLAT_OMAP_OPP_TWL_TPS_H + +#include <linux/kernel.h> + +unsigned long omap_twl_vsel_to_uv (const u8 vsel); +u8 omap_twl_uv_to_vsel (unsigned long uV); + +#endif arch/arm/plat-omap/opp.c +4
-23@@ -15,6 +15,7 @@#include <linux/init.h> #include <linux/slab.h> +#include <plat/opp_twl_tps.h> #include <plat/opp.h> /* @@ -24,33 +25,13 @@*/ #define OPP_TERM (opp) (!(opp)->rate && !(opp)->vsel && !(opp)->enabled) -/* -* DEPRECATED: Meant to convert vsel value to uVolt -* This is meant to help co-exist with current SRF etc -* TODO: REMOVE! -*/ -static inline unsigned long vsel_to_uv (const u8 vsel) -{ -return (((vsel *125 ) +6000 )) *100 ; -} - -/* -* DEPRECATED: Meant to convert uVolt to vsel value -* This is meant to help co-exist with current SRF etc -* TODO: REMOVE! -*/ -static inline unsigned char uv_to_vsel (unsigned long uV) -{ -return ((uV /100 ) -6000 ) /125 ; -} -unsigned long opp_get_voltage (const struct omap_opp *opp) {if (unlikely (!opp ||IS_ERR (opp)) || !opp->enabled) {pr_err ("%s: Invalid parameters being passed\n" , __func__);return 0 ; } -return vsel_to_uv (opp->vsel); +return omap_twl_vsel_to_uv (opp->vsel); }unsigned long opp_get_freq (const struct omap_opp *opp)@@ -162,9 +143,9 @@ static void omap_opp_populate(struct omap_opp *opp, { opp->rate = opp_def->freq; opp->enabled = opp_def->enabled; - opp->vsel =uv_to_vsel (opp_def->u_volt); + opp->vsel =omap_twl_uv_to_vsel (opp_def->u_volt);/* round off to higher voltage */ -if (opp_def->u_volt >vsel_to_uv (opp->vsel)) +if (opp_def->u_volt >omap_twl_vsel_to_uv (opp->vsel)) opp->vsel++; }arch/arm/plat-omap/opp_twl_tps.c new file +27
-0@@ -0,0 +1,38 @@ +/* +* opp_twl_tps.c - TWL/TPS-specific functions for the OPP code +* +* Copyright (C) 2009 Texas Instruments Incorporated. +* Nishanth Menon +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +* XXX This code should be part of some other TWL/TPS code. +*/ + +#include <plat/opp_twl_tps.h> + +/** +* omap_twl_vsel_to_vdc - convert TWL/TPS VSEL value to microvolts DC +* @vsel: TWL/TPS VSEL value to convert +* +* Returns the microvolts DC that the TWL/TPS family of PMICs should +* generate when programmed with @vsel. +*/ +unsigned long omap_twl_vsel_to_uv (const u8 vsel) +{ +return (((vsel *125 ) +6000 )) *100 ; +} +
arch/arm/plat-omap/opp_twl_tps.c line 37
Quoted 10 lines
arch/arm/plat-omap/opp_twl_tps.c new file +10
-0+/** +* omap_twl_uv_to_vsel - convert microvolts DC to TWL/TPS VSEL value +* @uv: microvolts DC to convert +* +* Returns the VSEL value necessary for the TWL/TPS family of PMICs to +* generate an output voltage equal to or greater than @uv microvolts DC. +*/ +u8 omap_twl_uv_to_vsel (unsigned long uv) +{ +return ((uv /100 ) -6000 ) /125 ;
you may want to ensure that this returns ceil instead - that way you can clean bit of code off the init logic
if (opp_def->u_volt > omap_twl_vsel_to_uv(opp->vsel))
arch/arm/plat-omap/opp_twl_tps.c line 38
Quoted 4 lines
arch/arm/plat-omap/opp_twl_tps.c new file +1
-0+}
I dont think this belongs here.. I agree this is a twl settings Vs being other custom chip settings, probably we can do it part of sr cleanup though.. Regards,
NM
Paul Walmsley
maintainerPATCH 5/12 OMAP TWL/TPS OPP: vsel rounding belongs in opp_twl_tps.c
In reply to a message not in the archiveThe vsel roundoff code belongs in omap_twl_uv_to_vsel(), not omap_opp_populate(), since other code may use omap_twl_uv_to_vsel().
--- arch/arm/plat-omap/opp.c | 3 --- arch/arm/plat-omap/opp_twl_tps.c | 15 +++++++++++++-- 2 files changed, 13 insertions(+), 5 deletions(-)
arch/arm/plat-omap/opp.c +0 -3
@@ -144,9 +144,6 @@ static void omap_opp_populate(struct omap_opp *opp, opp->rate = opp_def->freq; opp->enabled = opp_def->enabled; opp->vsel =omap_twl_uv_to_vsel (opp_def->u_volt); -/* round off to higher voltage */ -if (opp_def->u_volt >omap_twl_vsel_to_uv (opp->vsel)) - opp->vsel++; } struct omap_opp *opp_add(struct omap_opp *oppl,
arch/arm/plat-omap/opp_twl_tps.c +13 -2
@@ -2,7 +2,9 @@* opp_twl_tps.c - TWL/TPS-specific functions for the OPP code * * Copyright (C) 2009 Texas Instruments Incorporated. -* Nishanth Menon +* Nishanth Menon +* Copyright (C) 2009 Nokia Corporation +* Paul Walmsley * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as
@@ -34,5 +36,14 @@ unsigned long omap_twl_vsel_to_uv(const u8 vsel)*/ u8 omap_twl_uv_to_vsel (unsigned long uv) { -return ((uv /100 ) -6000 ) /125 ; +u8 vsel; + + vsel = ((uv /100 ) -6000 ) /125 ; + +/* round off to higher voltage */ +/* XXX Surely not the best way to handle this. */ +if (uv >omap_twl_vsel_to_uv (vsel)) + vsel++; + +return vsel; }
Re: [PATCH 05/12] OMAP TWL/TPS OPP: vsel rounding belongs in opp_twl_tps.c
Paul Walmsley said the following on 12/18/2009 06:17 AM:
Quoted 45 lines
The vsel roundoff code belongs in
omap_twl_uv_to_vsel(), notomap_opp_populate(), since other code may useomap_twl_uv_to_vsel().--- arch/arm/plat-omap/opp.c | 3 --- arch/arm/plat-omap/opp_twl_tps.c | 15 +++++++++++++-- 2 files changed, 13 insertions(+), 5 deletions(-)arch/arm/plat-omap/opp.c +0
-3@@ -144,9 +144,6 @@ static void omap_opp_populate(struct omap_opp *opp, opp->rate = opp_def->freq; opp->enabled = opp_def->enabled; opp->vsel =omap_twl_uv_to_vsel (opp_def->u_volt); -/* round off to higher voltage */ -if (opp_def->u_volt >omap_twl_vsel_to_uv (opp->vsel)) - opp->vsel++; } struct omap_opp *opp_add(struct omap_opp *oppl,arch/arm/plat-omap/opp_twl_tps.c +4
-2@@ -2,7 +2,9 @@* opp_twl_tps.c - TWL/TPS-specific functions for the OPP code * * Copyright (C) 2009 Texas Instruments Incorporated. -* Nishanth Menon +* Nishanth Menon +* Copyright (C) 2009 Nokia Corporation +* Paul Walmsley * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -34,5 +36,14 @@ unsigned long omap_twl_vsel_to_uv(const u8 vsel)*/ u8 omap_twl_uv_to_vsel (unsigned long uv) { -return ((uv /100 ) -6000 ) /125 ; +u8 vsel;
arch/arm/plat-omap/opp_twl_tps.c unsigned long omap_twl_vsel_to_uv(const u8 vsel) · line 49
Quoted 10 lines
arch/arm/plat-omap/opp_twl_tps.c +9
-0+ + vsel = ((uv /100 ) -6000 ) /125 ; + +/* round off to higher voltage */ +/* XXX Surely not the best way to handle this. */ +if (uv >omap_twl_vsel_to_uv (vsel)) + vsel++; + +return vsel; }
ouch I missed this patch - this looks fine now.. thanks Regards,
NM
Paul Walmsley
maintainerPATCH 6/12 OMAP OPP: add microvolts DC ("u_volt") field into struct omap_opp
In reply to a message not in the archiveOPP layer code should be PMIC-independent. A future patch will remove the vsel field, which is TPS/TWL-dependent.
--- arch/arm/plat-omap/include/plat/opp.h | 4 +++- arch/arm/plat-omap/opp.c | 9 ++++++--- 2 files changed, 9 insertions(+), 4 deletions(-)
arch/arm/plat-omap/include/plat/opp.h +3 -1
@@ -21,6 +21,7 @@* @vsel: Voltage in volt processor level(this usage is * DEPRECATED to use Voltage in microvolts in future) * uV = ((vsel * 12.5) + 600) * 1000 +* @u_volt: minimum microvolts DC required for this OPP to function * * This structure stores the OPP information for a given domain. * Due to legacy reasons, this structure is currently exposed and
@@ -30,8 +31,9 @@struct omap_opp {bool enabled;unsigned long rate; +unsigned long u_volt;u8 __deprecated opp_id; -u16 __deprecated vsel; +u8 __deprecated vsel; };/**
arch/arm/plat-omap/opp.c +6 -3
@@ -23,7 +23,7 @@* This is meant to help co-exist with current SRF etc * TODO: REMOVE! */ -#define OPP_TERM (opp) (!(opp)->rate && !(opp)->vsel && !(opp)->enabled) +#define OPP_TERM (opp) (!(opp)->rate && !(opp)->u_volt && !(opp)->enabled)unsigned long opp_get_voltage (const struct omap_opp *opp) {
@@ -31,7 +31,7 @@ unsigned long opp_get_voltage(const struct omap_opp *opp)pr_err ("%s: Invalid parameters being passed\n" , __func__);return 0 ; } -return omap_twl_vsel_to_uv (opp->vsel); +return opp->u_volt; }unsigned long opp_get_freq (const struct omap_opp *opp)
@@ -143,7 +143,8 @@ static void omap_opp_populate(struct omap_opp *opp, { opp->rate = opp_def->freq; opp->enabled = opp_def->enabled; - opp->vsel =omap_twl_uv_to_vsel (opp_def->u_volt); + opp->u_volt = opp_def->u_volt; + opp->vsel =omap_twl_uv_to_vsel (opp_def->u_volt);/* XXX remove me */ } struct omap_opp *opp_add(struct omap_opp *oppl,
@@ -234,6 +235,7 @@ struct omap_opp __init *opp_init_list(const struct omap_opp_def *opp_defs) opp->rate =0 ; opp->enabled =0 ; opp->vsel =0 ; + opp->u_volt =0 ; opp++;while (n) {omap_opp_populate (opp, opp_defs);
@@ -247,6 +249,7 @@ struct omap_opp __init *opp_init_list(const struct omap_opp_def *opp_defs) opp->rate =0 ; opp->enabled =0 ; opp->vsel =0 ; + opp->u_volt =0 ;return oppl; }
Paul Walmsley
maintainerPATCH 7/12 OMAP OPP: add opp_find_opp_by_opp_id()
In reply to a message not in the archiveAdd code to the OPP layer to find OPPs by OPP ID. This is needed to hide the details of the struct omap_opp from SmartReflex and SRF code.
--- arch/arm/plat-omap/include/plat/opp.h | 3 +++ arch/arm/plat-omap/opp.c | 25 +++++++++++++++++++++++++ 2 files changed, 28 insertions(+), 0 deletions(-)
arch/arm/plat-omap/include/plat/opp.h +3 -0
@@ -241,4 +241,7 @@ int opp_enable(struct omap_opp *opp);*/ int opp_disable (struct omap_opp *opp); +struct omap_opp *__deprecated opp_find_by_opp_id (struct omap_opp *opps, +u8 opp_id); +#endif /* __ASM_ARM_OMAP_OPP_H */
arch/arm/plat-omap/opp.c +25 -0
@@ -43,6 +43,31 @@ unsigned long opp_get_freq(const struct omap_opp *opp)return opp->rate; } +/** +* opp_find_by_opp_id - look up OPP by OPP ID (deprecated) +* @opps: pointer to an array of struct omap_opp +* +* Returns the struct omap_opp pointer corresponding to the given OPP +* ID @opp_id, or returns NULL on error. +*/ +struct omap_opp *__deprecated opp_find_by_opp_id (struct omap_opp *opps, +u8 opp_id) +{ +int i =1 ; + +if (!opps || !opp_id) +return NULL ; + +/* The first entry is a dummy one, loop till we hit terminator */ +while (!OPP_TERM (&opps[i])) { +if (opps[i].enabled && (opps[i].opp_id == opp_id)) +return &opps[i]; + i++; + } + +return NULL ; +} +int opp_get_opp_count (struct omap_opp *oppl) {u8 n =0 ;
Paul Walmsley
maintainerPATCH 8/12 OMAP SR/SRF: use opp_find_opp_by_opp_id()
In reply to a message not in the archiveSmartReflex and SRF code should use opp_find_opp_by_opp_id() to find OPP entries by the OPP ID. This hides OPP layer details from SR/SRF code and also allows the removal of the open-coded OPP traversal.
--- arch/arm/mach-omap2/resource34xx.c | 30 ++++++++-------- arch/arm/mach-omap2/smartreflex.c | 66 ++++++++++++++++++++++++++++-------- 2 files changed, 66 insertions(+), 30 deletions(-)
arch/arm/mach-omap2/resource34xx.c +14 -16
@@ -25,6 +25,7 @@#include <plat/powerdomain.h> #include <plat/clockdomain.h> #include <plat/omap34xx.h> +#include <plat/opp_twl_tps.h> #include "smartreflex.h" #include "resource34xx.h"
@@ -157,10 +158,6 @@ static int curr_vdd1_opp;static int curr_vdd2_opp;static DEFINE_MUTEX (dvfs_mutex); -/* Introducing deprecated function because we got to.. */ -#define IS_OPP_TERMINATOR (opps, i) (!(opps)[(i)].enabled && \ - !(opps)[(i)].rate && !(opps)[(i)].vsel) -/** * opp_to_freq - convert OPPID to frequency (DEPRECATED) * @freq: return frequency back to caller
@@ -175,20 +172,17 @@ static DEFINE_MUTEX(dvfs_mutex);static int __deprecated opp_to_freq (unsigned long *freq,const struct omap_opp *opps,u8 opp_id) { -int i =1 ; +struct omap_opp *opp;BUG_ON (!freq || !opps); -/* The first entry is a dummy one, loop till we hit terminator */ -while (!IS_OPP_TERMINATOR (opps, i)) { -if (opps[i].enabled && (opps[i].opp_id == opp_id)) { - *freq = opps[i].rate; -return 0 ; - } - i++; - } + opp =opp_find_by_opp_id (opps, opp_id); +if (!opp) +return -EINVAL ; -return -EINVAL ; + *freq =opp_get_freq (opp); + +return 0 ; }/**
@@ -365,18 +359,22 @@ static int program_opp(int res, struct omap_opp *opp, int target_level,else {u8 vc, vt;struct omap_opp *oppx; +unsigned long uvdc; +/* * transitioning from good to good OPP * none of the following should fail.. */ oppx =opp_find_freq_exact (opp, freq, true);BUG_ON (IS_ERR (oppx)); - vt = oppx->vsel; + uvdc =opp_get_voltage (oppx); + vt =omap_twl_uv_to_vsel (uvdc);BUG_ON (opp_to_freq (&freq, opp, current_level)); oppx =opp_find_freq_exact (opp, freq, true);BUG_ON (IS_ERR (oppx)); - vc = oppx->vsel; + uvdc =opp_get_voltage (oppx); + vc =omap_twl_uv_to_vsel (uvdc);/* ok to scale.. */ sr_voltagescale_vcbypass (t_opp, c_opp, vt, vc);
arch/arm/mach-omap2/smartreflex.c +52 -14
142 lines not on this page · raw message
Paul Walmsley
maintainerPATCH 9/12 OMAP OPP: remove vsel
In reply to a message not in the archiveThe OPP code should be PMIC-independent; vsel is a TWL/TPS-ism; so remove it.
--- arch/arm/plat-omap/include/plat/opp.h | 4 ---- arch/arm/plat-omap/opp.c | 3 --- 2 files changed, 0 insertions(+), 7 deletions(-)
arch/arm/plat-omap/include/plat/opp.h +0 -4
@@ -18,9 +18,6 @@* @enabled: true/false - marking this OPP as enabled/disabled * @rate: Frequency in hertz * @opp_id: (DEPRECATED) opp identifier -* @vsel: Voltage in volt processor level(this usage is -* DEPRECATED to use Voltage in microvolts in future) -* uV = ((vsel * 12.5) + 600) * 1000 * @u_volt: minimum microvolts DC required for this OPP to function * * This structure stores the OPP information for a given domain.
@@ -33,7 +30,6 @@ struct omap_opp {unsigned long rate;unsigned long u_volt;u8 __deprecated opp_id; -u8 __deprecated vsel; };/**
arch/arm/plat-omap/opp.c +0 -3
@@ -169,7 +169,6 @@ static void omap_opp_populate(struct omap_opp *opp, opp->rate = opp_def->freq; opp->enabled = opp_def->enabled; opp->u_volt = opp_def->u_volt; - opp->vsel =omap_twl_uv_to_vsel (opp_def->u_volt);/* XXX remove me */ } struct omap_opp *opp_add(struct omap_opp *oppl,
@@ -259,7 +258,6 @@ struct omap_opp __init *opp_init_list(const struct omap_opp_def *opp_defs)/* Setup start terminator - SRF depends on this for indexing :( */ opp->rate =0 ; opp->enabled =0 ; - opp->vsel =0 ; opp->u_volt =0 ; opp++;while (n) {
@@ -273,7 +271,6 @@ struct omap_opp __init *opp_init_list(const struct omap_opp_def *opp_defs)/* Setup terminator - this is for our search algos */ opp->rate =0 ; opp->enabled =0 ; - opp->vsel =0 ; opp->u_volt =0 ;return oppl; }
Paul Walmsley
maintainerPATCH 10/12 OMAP OPP: remove "initial terminators" from OPP lists
In reply to a message not in the archiveNow that the SRF and Smartreflex code uses accessor functions to interact with OPPs, the "initial terminators" can be removed.
--- arch/arm/plat-omap/opp.c | 36 ++++++++---------------------------- 1 files changed, 8 insertions(+), 28 deletions(-)
arch/arm/plat-omap/opp.c +8 -28
@@ -53,15 +53,15 @@ unsigned long opp_get_freq(const struct omap_opp *opp)struct omap_opp *__deprecated opp_find_by_opp_id (struct omap_opp *opps,u8 opp_id) { -int i =1 ; +int i =0 ;if (!opps || !opp_id)return NULL ; -/* The first entry is a dummy one, loop till we hit terminator */ while (!OPP_TERM (&opps[i])) {if (opps[i].enabled && (opps[i].opp_id == opp_id))return &opps[i]; + i++; }
@@ -76,7 +76,6 @@ int opp_get_opp_count(struct omap_opp *oppl)pr_err ("%s: Invalid parameters being passed\n" , __func__);return -EINVAL ; } - oppl++;/* skip initial terminator */ while (!OPP_TERM (oppl)) {if (oppl->enabled) n++;
@@ -92,9 +91,7 @@ struct omap_opp *opp_find_freq_exact(struct omap_opp *oppl,pr_err ("%s: Invalid parameters being passed\n" , __func__);return ERR_PTR (-EINVAL ); } -/* skip initial terminator */ -if (OPP_TERM (oppl)) - oppl++; +while (!OPP_TERM (oppl)) {if ((oppl->rate == freq) && (oppl->enabled == enabled))break ;
@@ -111,10 +108,6 @@ struct omap_opp *opp_find_freq_ceil(struct omap_opp *oppl, unsigned long *freq)return ERR_PTR (-EINVAL ); } -/* skip initial terminator */ -if (OPP_TERM (oppl)) - oppl++; -while (!OPP_TERM (oppl)) {if (oppl->enabled && oppl->rate >= *freq)break ;
@@ -139,10 +132,6 @@ struct omap_opp *opp_find_freq_floor(struct omap_opp *oppl, unsigned long *freq)return ERR_PTR (-EINVAL ); } -/* skip initial terminator */ -if (OPP_TERM (oppl)) - oppl++; -while (!OPP_TERM (oppl)) {if (oppl->enabled) {if (oppl->rate > *freq)
@@ -181,20 +170,16 @@ struct omap_opp *opp_add(struct omap_opp *oppl,pr_err ("%s: Invalid params being passed\n" , __func__);return ERR_PTR (-EINVAL ); } -/* need a start terminator.. */ -if (unlikely (!OPP_TERM (oppl))) { -pr_err ("%s: Expected a start terminator!!\n" , __func__); -return ERR_PTR (-EINVAL ); - } + n =0 ; opp = oppl; - opp++;while (!OPP_TERM (opp)) { n++; opp++; } +/* lets now reallocate memory */ - oppr =kmalloc (sizeof (struct omap_opp ) * (n +3 ),GFP_KERNEL ); + oppr =kmalloc (sizeof (struct omap_opp ) * (n +2 ),GFP_KERNEL );if (!oppr) {pr_err ("%s: No memory for new opp array\n" , __func__);return ERR_PTR (-ENOMEM );
@@ -204,7 +189,7 @@ struct omap_opp *opp_add(struct omap_opp *oppl, opp = oppl; oppt = oppr; ins =0 ; - i =0 ; + i =1 ; do { if (ins || opp->rate < opp_def->freq) { memcpy(oppt, opp, sizeof(struct omap_opp));
@@ -249,17 +234,12 @@ struct omap_opp __init *opp_init_list(const struct omap_opp_def *opp_defs) t++; } - oppl =kmalloc (sizeof (struct omap_opp ) * (n +2 ),GFP_KERNEL ); + oppl =kmalloc (sizeof (struct omap_opp ) * (n +1 ),GFP_KERNEL );if (!oppl) {pr_err ("%s: No memory for opp array\n" , __func__);return ERR_PTR (-ENOMEM ); } opp = oppl; -/* Setup start terminator - SRF depends on this for indexing :( */ - opp->rate =0 ; - opp->enabled =0 ; - opp->u_volt =0 ; - opp++;while (n) {omap_opp_populate (opp, opp_defs); opp->opp_id = i;
Re: [PATCH 10/12] OMAP OPP: remove "initial terminators" from OPP lists
Quoted 2 lines · Paul Walmsley
Now that the SRF and Smartreflex code uses accessor functions to interact with OPPs, the "initial terminators" can be removed.
Nice.
With the initial terminators gone, some assumptions in SRF have to be changed too where SRF is directly indexing into the OPP table.
I'll fix that up in an updated version of my 'hide OPP details' series.
Kevin
Quoted 125 lines
--- arch/arm/plat-omap/opp.c | 36 ++++++++---------------------------- 1 files changed, 8 insertions(+), 28 deletions(-)arch/arm/plat-omap/opp.c +8
-29@@ -53,15 +53,15 @@ unsigned long opp_get_freq(const struct omap_opp *opp)struct omap_opp *__deprecated opp_find_by_opp_id (struct omap_opp *opps,u8 opp_id) { -int i =1 ; +int i =0 ;if (!opps || !opp_id)return NULL ; -/* The first entry is a dummy one, loop till we hit terminator */ while (!OPP_TERM (&opps[i])) {if (opps[i].enabled && (opps[i].opp_id == opp_id))return &opps[i]; + i++; }@@ -76,7 +76,6 @@ int opp_get_opp_count(struct omap_opp *oppl)pr_err ("%s: Invalid parameters being passed\n" , __func__);return -EINVAL ; } - oppl++;/* skip initial terminator */ while (!OPP_TERM (oppl)) {if (oppl->enabled) n++;@@ -92,9 +91,7 @@ struct omap_opp *opp_find_freq_exact(struct omap_opp *oppl,pr_err ("%s: Invalid parameters being passed\n" , __func__);return ERR_PTR (-EINVAL ); } -/* skip initial terminator */ -if (OPP_TERM (oppl)) - oppl++; +while (!OPP_TERM (oppl)) {if ((oppl->rate == freq) && (oppl->enabled == enabled))break ;@@ -111,10 +108,6 @@ struct omap_opp *opp_find_freq_ceil(struct omap_opp *oppl, unsigned long *freq)return ERR_PTR (-EINVAL ); } -/* skip initial terminator */ -if (OPP_TERM (oppl)) - oppl++; -while (!OPP_TERM (oppl)) {if (oppl->enabled && oppl->rate >= *freq)break ;@@ -139,10 +132,6 @@ struct omap_opp *opp_find_freq_floor(struct omap_opp *oppl, unsigned long *freq)return ERR_PTR (-EINVAL ); } -/* skip initial terminator */ -if (OPP_TERM (oppl)) - oppl++; -while (!OPP_TERM (oppl)) {if (oppl->enabled) {if (oppl->rate > *freq)@@ -181,20 +170,16 @@ struct omap_opp *opp_add(struct omap_opp *oppl,pr_err ("%s: Invalid params being passed\n" , __func__);return ERR_PTR (-EINVAL ); } -/* need a start terminator.. */ -if (unlikely (!OPP_TERM (oppl))) { -pr_err ("%s: Expected a start terminator!!\n" , __func__); -return ERR_PTR (-EINVAL ); - } + n =0 ; opp = oppl; - opp++;while (!OPP_TERM (opp)) { n++; opp++; } +/* lets now reallocate memory */ - oppr =kmalloc (sizeof (struct omap_opp ) * (n +3 ),GFP_KERNEL ); + oppr =kmalloc (sizeof (struct omap_opp ) * (n +2 ),GFP_KERNEL );if (!oppr) {pr_err ("%s: No memory for new opp array\n" , __func__);return ERR_PTR (-ENOMEM );@@ -204,7 +189,7 @@ struct omap_opp *opp_add(struct omap_opp *oppl, opp = oppl; oppt = oppr; ins =0 ; - i =0 ; + i =1 ; do { if (ins || opp->rate < opp_def->freq) { memcpy(oppt, opp, sizeof(struct omap_opp));@@ -249,17 +234,12 @@ struct omap_opp __init *opp_init_list(const struct omap_opp_def *opp_defs) t++; } - oppl =kmalloc (sizeof (struct omap_opp ) * (n +2 ),GFP_KERNEL ); + oppl =kmalloc (sizeof (struct omap_opp ) * (n +1 ),GFP_KERNEL );if (!oppl) {pr_err ("%s: No memory for opp array\n" , __func__);return ERR_PTR (-ENOMEM ); } opp = oppl; -/* Setup start terminator - SRF depends on this for indexing :( */ - opp->rate =0 ; - opp->enabled =0 ; - opp->u_volt =0 ; - opp++;while (n) {omap_opp_populate (opp, opp_defs); opp->opp_id = i; --To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Paul Walmsley
maintainerPATCH 11/12 OMAP OPP: use kzalloc() rather than kmalloc()
In reply to a message not in the archiveUsing kzalloc() avoids inadvertently forgetting to initialize some structure member.
--- arch/arm/plat-omap/opp.c | 25 ++++++++++++++++--------- 1 files changed, 16 insertions(+), 9 deletions(-)
arch/arm/plat-omap/opp.c +16 -9
@@ -178,8 +178,11 @@ struct omap_opp *opp_add(struct omap_opp *oppl, opp++; } -/* lets now reallocate memory */ - oppr =kmalloc (sizeof (struct omap_opp ) * (n +2 ),GFP_KERNEL ); +/* +* Allocate enough entries to copy the original list, plus the new +* OPP, plus the concluding terminator +*/ + oppr =kzalloc (sizeof (struct omap_opp ) * (n +2 ),GFP_KERNEL );if (!oppr) {pr_err ("%s: No memory for new opp array\n" , __func__);return ERR_PTR (-ENOMEM );
@@ -209,8 +212,8 @@ struct omap_opp *opp_add(struct omap_opp *oppl, oppt->opp_id = i; oppt++; } -/* Put the terminator back on */ -memcpy (oppt, opp,sizeof (struct omap_opp )); + +/* Terminator implicitly added by kzalloc() */ /* Free the old list */ kfree (oppl);
@@ -234,11 +237,16 @@ struct omap_opp __init *opp_init_list(const struct omap_opp_def *opp_defs) t++; } - oppl =kmalloc (sizeof (struct omap_opp ) * (n +1 ),GFP_KERNEL ); +/* +* Allocate enough entries to copy the original list, plus the +* concluding terminator +*/ + oppl =kzalloc (sizeof (struct omap_opp ) * (n +1 ),GFP_KERNEL );if (!oppl) {pr_err ("%s: No memory for opp array\n" , __func__);return ERR_PTR (-ENOMEM ); } + opp = oppl;while (n) {omap_opp_populate (opp, opp_defs);
@@ -248,10 +256,9 @@ struct omap_opp __init *opp_init_list(const struct omap_opp_def *opp_defs) opp_defs++; i++; } -/* Setup terminator - this is for our search algos */ - opp->rate =0 ; - opp->enabled =0 ; - opp->u_volt =0 ; + +/* Terminator implicitly added by kzalloc() */ +return oppl; }
Paul Walmsley
maintainerPATCH 12/12 OMAP3 OPP: move CPUFreq table init code to OPP layer
In reply to a message not in the archiveMove omap2_clk_init_cpufreq_table() to opp_init_cpufreq_table() in opp.c where it now belongs. OMAP2 still needs to be converted to use the OPP layer, so it is using the old code.
--- arch/arm/mach-omap2/clock34xx.c | 55 +-------------------------------- arch/arm/plat-omap/cpu-omap.c | 6 +++- arch/arm/plat-omap/include/plat/opp.h | 4 ++ arch/arm/plat-omap/opp.c | 46 ++++++++++++++++++++++++++++ 4 files changed, 56 insertions(+), 55 deletions(-)
arch/arm/mach-omap2/clock34xx.c +1 -54
@@ -27,7 +27,6 @@#include <linux/limits.h> #include <linux/bitops.h> #include <linux/err.h> -#include <linux/cpufreq.h> #include <plat/cpu.h> #include <plat/clock.h>
@@ -257,56 +256,7 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)/* Common clock code */ -/* -* As it is structured now, this will prevent an OMAP2/3 multiboot -* kernel from compiling. This will need further attention. -*/ -#if defined(CONFIG_ARCH_OMAP3 ) - -#ifdef CONFIG_CPU_FREQ - -static struct cpufreq_frequency_table *freq_table; - -void omap2_clk_init_cpufreq_table (struct cpufreq_frequency_table **table) -{ -int i =0 ; -int opp_num; -struct omap_opp *opp = mpu_opps; -unsigned long freq =ULONG_MAX ; - -if (!mpu_opps) { -pr_warning ("%s: failed to initialize frequency" -"table\n" , __func__); -return ; - } - opp_num =opp_get_opp_count (mpu_opps); -if (opp_num <0 ) { -pr_err ("%s: no opp table?\n" , __func__); -return ; - } - - freq_table =kmalloc (sizeof (struct cpufreq_frequency_table ) * - (opp_num +1 ),GFP_ATOMIC ); -if (!freq_table) { -pr_warning ("%s: failed to allocate frequency" -"table\n" , __func__); -return ; - } - -while (!IS_ERR (opp =opp_find_freq_floor (opp, &freq))) { - freq_table[i].index = i; - freq_table[i].frequency = freq /1000 ; - i++; -/* set the next benchmark to search */ - freq--; - } - - freq_table[i].index = i; - freq_table[i].frequency =CPUFREQ_TABLE_END ; - - *table = &freq_table[0 ]; -} -#endif +#ifdef CONFIG_ARCH_OMAP3 struct clk_functions omap2_clk_functions = { .clk_enable = omap2_clk_enable,
@@ -315,9 +265,6 @@ struct clk_functions omap2_clk_functions = { .clk_set_rate = omap2_clk_set_rate, .clk_set_parent = omap2_clk_set_parent, .clk_disable_unused = omap2_clk_disable_unused, -#ifdef CONFIG_CPU_FREQ - .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table, -#endif };/*
arch/arm/plat-omap/cpu-omap.c +5 -1
@@ -132,7 +132,11 @@ static int __init omap_cpu_init(struct cpufreq_policy *policy) policy->cur = policy->min = policy->max =omap_getspeed (0 ); -clk_init_cpufreq_table (&freq_table); +if (!cpu_is_omap34xx ()) +clk_init_cpufreq_table (&freq_table); +else +opp_init_cpufreq_table (mpu_opps, &freq_table); +if (freq_table) { result =cpufreq_frequency_table_cpuinfo (policy, freq_table);if (!result)
arch/arm/plat-omap/include/plat/opp.h +4 -0
@@ -240,4 +240,8 @@ int opp_disable(struct omap_opp *opp);struct omap_opp *__deprecated opp_find_by_opp_id (struct omap_opp *opps,u8 opp_id); +void opp_init_cpufreq_table (struct omap_opp *opps, +struct cpufreq_frequency_table **table); + +#endif /* __ASM_ARM_OMAP_OPP_H */
arch/arm/plat-omap/opp.c +46 -0
55 lines not on this page · raw message
Re: [PATCH 12/12] OMAP3 OPP: move CPUFreq table init code to OPP layer
Paul Walmsley said the following on 12/18/2009 06:17 AM:
Quoted 4 lines
Move
omap2_clk_init_cpufreq_table()toopp_init_cpufreq_table()inopp.cwhere it now belongs. OMAP2 still needs to be converted to use the OPP layer, so it is using the old code.
Neat.. thanks.. helps Omap4 too I can see..
Quoted 171 lines
--- arch/arm/mach-omap2/clock34xx.c | 55 +-------------------------------- arch/arm/plat-omap/cpu-omap.c | 6 +++- arch/arm/plat-omap/include/plat/opp.h | 4 ++ arch/arm/plat-omap/opp.c | 46 ++++++++++++++++++++++++++++ 4 files changed, 56 insertions(+), 55 deletions(-)arch/arm/mach-omap2/clock34xx.c +1
-54@@ -27,7 +27,6 @@#include <linux/limits.h> #include <linux/bitops.h> #include <linux/err.h> -#include <linux/cpufreq.h> #include <plat/cpu.h> #include <plat/clock.h> @@ -257,56 +256,7 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)/* Common clock code */ -/* -* As it is structured now, this will prevent an OMAP2/3 multiboot -* kernel from compiling. This will need further attention. -*/ -#if defined(CONFIG_ARCH_OMAP3 ) - -#ifdef CONFIG_CPU_FREQ - -static struct cpufreq_frequency_table *freq_table; - -void omap2_clk_init_cpufreq_table (struct cpufreq_frequency_table **table) -{ -int i =0 ; -int opp_num; -struct omap_opp *opp = mpu_opps; -unsigned long freq =ULONG_MAX ; - -if (!mpu_opps) { -pr_warning ("%s: failed to initialize frequency" -"table\n" , __func__); -return ; - } - opp_num =opp_get_opp_count (mpu_opps); -if (opp_num <0 ) { -pr_err ("%s: no opp table?\n" , __func__); -return ; - } - - freq_table =kmalloc (sizeof (struct cpufreq_frequency_table ) * - (opp_num +1 ),GFP_ATOMIC ); -if (!freq_table) { -pr_warning ("%s: failed to allocate frequency" -"table\n" , __func__); -return ; - } - -while (!IS_ERR (opp =opp_find_freq_floor (opp, &freq))) { - freq_table[i].index = i; - freq_table[i].frequency = freq /1000 ; - i++; -/* set the next benchmark to search */ - freq--; - } - - freq_table[i].index = i; - freq_table[i].frequency =CPUFREQ_TABLE_END ; - - *table = &freq_table[0 ]; -} -#endif +#ifdef CONFIG_ARCH_OMAP3 struct clk_functions omap2_clk_functions = { .clk_enable = omap2_clk_enable,@@ -315,9 +265,6 @@ struct clk_functions omap2_clk_functions = { .clk_set_rate = omap2_clk_set_rate, .clk_set_parent = omap2_clk_set_parent, .clk_disable_unused = omap2_clk_disable_unused, -#ifdef CONFIG_CPU_FREQ - .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table, -#endif };/* arch/arm/plat-omap/cpu-omap.c +5
-1@@ -132,7 +132,11 @@ static int __init omap_cpu_init(struct cpufreq_policy *policy) policy->cur = policy->min = policy->max =omap_getspeed (0 ); -clk_init_cpufreq_table (&freq_table); +if (!cpu_is_omap34xx ()) +clk_init_cpufreq_table (&freq_table); +else +opp_init_cpufreq_table (mpu_opps, &freq_table); +if (freq_table) { result =cpufreq_frequency_table_cpuinfo (policy, freq_table);if (!result)arch/arm/plat-omap/include/plat/opp.h +4
-0@@ -240,4 +240,8 @@ int opp_disable(struct omap_opp *opp);struct omap_opp *__deprecated opp_find_by_opp_id (struct omap_opp *opps,u8 opp_id); +void opp_init_cpufreq_table (struct omap_opp *opps, +struct cpufreq_frequency_table **table); + +#endif /* __ASM_ARM_OMAP_OPP_H */ arch/arm/plat-omap/opp.c +36
-0@@ -14,6 +14,7 @@#include <linux/err.h> #include <linux/init.h> #include <linux/slab.h> +#include <linux/cpufreq.h> #include <plat/opp_twl_tps.h> #include <plat/opp.h> @@ -281,3 +282,48 @@ int opp_disable(struct omap_opp *opp) opp->enabled = false;return 0 ; } + +/* XXX document */ +void opp_init_cpufreq_table (struct omap_opp *opps, +struct cpufreq_frequency_table **table) +{ +int i =0 ; +int opp_num; +unsigned long freq =ULONG_MAX ; +struct cpufreq_frequency_table *freq_table; + +if (!opps) { +pr_warning ("%s: failed to initialize frequency" +"table\n" , __func__); +return ; + } + + opp_num =opp_get_opp_count (opps); +if (opp_num <0 ) { +pr_err ("%s: no opp table?\n" , __func__); +return ; + } + + freq_table =kmalloc (sizeof (struct cpufreq_frequency_table ) * + (opp_num +1 ),GFP_ATOMIC ); +if (!freq_table) { +pr_warning ("%s: failed to allocate frequency" +"table\n" , __func__); +return ; + } + +while (!OPP_TERM (opps)) { +if (opps->enabled) { + freq_table[i].index = i; + freq_table[i].frequency = freq /1000 ; + i++;
arch/arm/plat-omap/opp.c int opp_disable(struct omap_opp *opp) · line 329
Quoted 10 lines
arch/arm/plat-omap/opp.c +10
-0+ } + + opps++; + } + + freq_table[i].index = i; + freq_table[i].frequency =CPUFREQ_TABLE_END ; + + *table = &freq_table[0 ]; +}
here is a future problem I see:
I think we need notifiers for opp_enable,disable and add -> this will allow dynamic opp table modification allowing cpufreq changes accordingly.
Regards,
Nishanth Menon