e1000e: LED settings in EEPROM ignored on 82571 and 82572
Subsystems (2)
PATCH 1/1 e1000e: LED settings in EEPROM ignored on 82571 and 82572
From: Bruce Allan <[email protected]>
Do not override the customizable LED configuration set in the EEPROM.
Signed-off-by Bruce Allan <[email protected]>
Signed-off-by Jeff Kirsher <[email protected]>
---
drivers/net/e1000e/82571.c | 6 ------ 1 files changed, 0 insertions(+), 6 deletions(-)
drivers/net/e1000e/82571.c +0 -6
@@ -1290,7 +1290,6 @@ static s32 e1000_setup_link_82571(struct e1000_hw *hw)static s32 e1000_setup_copper_link_82571 (struct e1000_hw *hw) {u32 ctrl; -u32 led_ctrl;s32 ret_val; ctrl =er32 (CTRL );
@@ -1305,11 +1304,6 @@ static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw)break ;case e1000_phy_igp_2: ret_val =e1000e_copper_link_setup_igp (hw); -/* Setup activity LED */ - led_ctrl =er32 (LEDCTL ); - led_ctrl &=IGP_ACTIVITY_LED_MASK ; - led_ctrl |= (IGP_ACTIVITY_LED_ENABLE |IGP_LED3_MODE ); -ew32 (LEDCTL , led_ctrl);break ;default :return -E1000_ERR_PHY ;
From: Jeff Kirsher <[email protected]>
Date: Thu, 17 Dec 2009 17:42:15 -0800
Quoted 6 lines
From: Bruce Allan <[email protected]>
Do not override the customizable LED configuration set in the EEPROM.
Signed-off-by Bruce Allan <[email protected]>Signed-off-by Jeff Kirsher <[email protected]>
Applied, thanks.