ixgbe: fix Need to call pci_save_state after pci_restore_state
Subsystems (2)
PATCH 1/1 ixgbe: fix Need to call pci_save_state after pci_restore_state
From: Don Skidmore <[email protected]>
This patch adds a pci_save_state() call in ixgbe_resume() after pci_restore_state(). A similar change was made in ixgbe_io_slot_reset() that accommodates pci_restore_state() new behavior. This change makes pci_restore_state() clear the saved_state flag This is necessary due to a resent kernel change to pci_restore_state() so that it now clears the saved_state flag of the device right after the device.s standard configuration registers have been poplulated with the previously saved values.
---
drivers/net/ixgbe/ixgbe_main.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-)
drivers/net/ixgbe/ixgbe_main.c +5 -0
@@ -4373,6 +4373,11 @@ static int ixgbe_resume(struct pci_dev *pdev)pci_set_power_state (pdev,PCI_D0 );pci_restore_state (pdev); +/* +* pci_restore_state clears dev->state_saved so call +* pci_save_state to restore it. +*/ +pci_save_state (pdev); err =pci_enable_device_mem (pdev);if (err) {
From: Jeff Kirsher <[email protected]>
Date: Tue, 22 Dec 2009 12:45:20 -0800
Quoted 11 lines
From: Don Skidmore <[email protected]>
This patch adds a
pci_save_state()call inixgbe_resume()afterpci_restore_state(). A similar change was made inixgbe_io_slot_reset()that accommodatespci_restore_state()new behavior. This change makespci_restore_state()clear thesaved_stateflag This is necessary due to a resent kernel change topci_restore_state()so that it now clears thesaved_stateflag of the device right after the device.s standard configuration registers have been poplulated with the previously saved values.
Quoted 3 lines
Signed-off-by Don Skidmore <[email protected]>Signed-off-by Jeff Kirsher <[email protected]>
Applied, thanks.