wireless fixes
Johannes Berg
maintainercover wireless fixes
Hi,
Here are a few wireless fixes. I've sent all these before, but these are now rebased over the current wireless-testing tree.
johannes
Johannes Berg
maintainerPATCH 1/3 mac80211: fix WMM AP settings application
My
commit 77fdaa12cea26c204cc12c312fe40bc0f3dcdfd8
Author: Johannes Berg <[email protected]>
Date: Tue Jul 7 03:45:17 2009 +0200
mac80211: rework MLME for multiple authentications
inadvertedly broke WMM because it removed, along with a bunch of other now useless initialisations, the line initialising sdata->u.mgd.wmm_last_param_set to -1 which would make it adopt any WMM parameter set. If, as is usually the case, the AP uses WMM parameter set sequence number zero, we'd never update it until the AP changes the sequence number.
Add the missing initialisation back to get the WMM settings from the AP applied locally.
--- net/mac80211/mlme.c | 8 ++++++++ 1 file changed, 8 insertions(+)
net/mac80211/mlme.c +8 -0
@@ -981,6 +981,14 @@ static void ieee80211_set_associated(str*/ sdata->u.mgd.wmm_last_param_set =-1 ; +/* +* Always handle WMM once after association regardless +* of the first value the AP uses. Setting -1 here has +* that effect because the AP values is an unsigned +* 4-bit value. +*/ + sdata->u.mgd.wmm_last_param_set =-1 ; +ieee80211_led_assoc (local,1 ); sdata->vif.bss_conf.assoc =1 ;
Johannes Berg
maintainerPATCH 2/3 wireless: remove remaining qual code
In reply to Johannes BergThis removes the remaining users of the rx status
'qual' field and the field itself.
--- drivers/net/wireless/ath/ath5k/base.c | 11 -- drivers/net/wireless/iwlwifi/iwl-3945.c | 10 -- drivers/net/wireless/iwlwifi/iwl-3945.h | 1 drivers/net/wireless/iwlwifi/iwl-rx.c | 48 --------- drivers/net/wireless/iwlwifi/iwl3945-base.c | 41 -------- drivers/net/wireless/libertas_tf/main.c | 1 drivers/net/wireless/zd1211rw/zd_chip.c | 140 ---------------------------- drivers/net/wireless/zd1211rw/zd_chip.h | 3 drivers/net/wireless/zd1211rw/zd_mac.c | 3 include/net/mac80211.h | 2 10 files changed, 4 insertions(+), 256 deletions(-)
drivers/net/wireless/ath/ath5k/base.c +0 -11
@@ -1903,17 +1903,6 @@ accept: rxs->noise = sc->ah->ah_noise_floor; rxs->signal = rxs->noise + rs.rs_rssi; -/* An rssi of 35 indicates you should be able use -* 54 Mbps reliably. A more elaborate scheme can be used -* here but it requires a map of SNR/throughput for each -* possible mode used */ - rxs->qual = rs.rs_rssi *100 /35 ; - -/* rssi can be more than 35 though, anything above that -* should be considered at 100% */ -if (rxs->qual >100 ) - rxs->qual =100 ; - rxs->antenna = rs.rs_antenna; rxs->rate_idx =ath5k_hw_to_driver_rix (sc, rs.rs_rate); rxs->flag |=ath5k_rx_decrypted (sc, ds, skb, &rs);
drivers/net/wireless/iwlwifi/iwl-3945.c +2 -8
@@ -681,19 +681,13 @@ static void iwl3945_rx_reply_rx(struct i snr = rx_stats_sig_avg / rx_stats_noise_diff; rx_status.noise = rx_status.signal -iwl3945_calc_db_from_ratio (snr); - rx_status.qual =iwl3945_calc_sig_qual (rx_status.signal, - rx_status.noise); - -/* If noise info not available, calculate signal quality indicator (%) -* using just the dBm signal level. */ }else { rx_status.noise = priv->last_rx_noise; - rx_status.qual =iwl3945_calc_sig_qual (rx_status.signal,0 ); } -IWL_DEBUG_STATS (priv,"Rssi %d noise %d qual %d sig_avg %d noise_diff %d\n" , - rx_status.signal, rx_status.noise, rx_status.qual, +IWL_DEBUG_STATS (priv,"Rssi %d noise %d sig_avg %d noise_diff %d\n" , + rx_status.signal, rx_status.noise, rx_stats_sig_avg, rx_stats_noise_diff); header = (struct ieee80211_hdr *)IWL_RX_DATA (pkt);
drivers/net/wireless/iwlwifi/iwl-rx.c +2 -46
68 lines not on this page · raw message
drivers/net/wireless/iwlwifi/iwl3945-base.c +0 -41
47 lines not on this page · raw message
drivers/net/wireless/libertas_tf/main.c +0 -1
@@ -495,7 +495,6 @@ int lbtf_rx(struct lbtf_private *priv, s stats.band =IEEE80211_BAND_2GHZ ; stats.signal = prxpd->snr; stats.noise = prxpd->nf; - stats.qual = prxpd->snr - prxpd->nf;/* Marvell rate index has a hole at value 4 */ if (prxpd->rx_rate >4 ) --prxpd->rx_rate;
drivers/net/wireless/zd1211rw/zd_chip.c +0 -140
151 lines not on this page · raw message
drivers/net/wireless/zd1211rw/zd_chip.h +0 -3
@@ -929,9 +929,6 @@ static inline int zd_get_beacon_intervalstruct rx_status ; -u8 zd_rx_qual_percent (const void *rx_frame,unsigned int size, -const struct rx_status *status); -u8 zd_rx_rate (const void *rx_frame,const struct rx_status *status);struct zd_mc_hash {
drivers/net/wireless/zd1211rw/zd_mac.c +0 -3
@@ -828,9 +828,6 @@ int zd_mac_rx(struct ieee80211_hw *hw, c stats.freq = zd_channels[_zd_chip_get_channel (&mac->chip) -1 ].center_freq; stats.band =IEEE80211_BAND_2GHZ ; stats.signal = status->signal_strength; - stats.qual =zd_rx_qual_percent (buffer, - length -sizeof (struct rx_status ), - status); rate =zd_rx_rate (buffer, status);
drivers/net/wireless/iwlwifi/iwl-3945.h +0 -1
@@ -222,7 +222,6 @@ struct iwl3945_ibss_seq {* *****************************************************************************/ extern int iwl3945_calc_db_from_ratio (int sig_ratio); -extern int iwl3945_calc_sig_qual (int rssi_dbm,int noise_dbm);extern void iwl3945_rx_replenish (void *data);extern void iwl3945_rx_queue_reset (struct iwl_priv *priv,struct iwl_rx_queue *rxq); extern unsigned int iwl3945_fill_beacon_frame(struct iwl_priv *priv,
include/net/mac80211.h +0 -2
@@ -547,7 +547,6 @@ enum mac80211_rx_flags {* unspecified depending on the hardware capabilities flags * @IEEE80211_HW_SIGNAL_* * @noise: noise when receiving this frame, in dBm. -* @qual: overall signal quality indication, in percent (0-100). * @antenna: antenna used * @rate_idx: index of data rate into band's supported rates or MCS index if * HT rates are use (RX_FLAG_HT)
@@ -559,7 +558,6 @@ struct ieee80211_rx_status {int freq;int signal;int noise; -int __deprecated qual;int antenna;int rate_idx;int flag;
Johannes Berg
maintainerPATCH 3/3 cfg80211: fix race between deauth and assoc response
In reply to Johannes BergJoseph Nahmias reported, in http://bugs.debian.org/562016,
that he was getting the following warning (with some log around the issue):
ath0: direct probe to AP 00:11:95:77:e0:b0 (try 1)
ath0: direct probe responded
ath0: authenticate with AP 00:11:95:77:e0:b0 (try 1)
ath0: authenticated
ath0: associate with AP 00:11:95:77:e0:b0 (try 1)
ath0: deauthenticating from 00:11:95:77:e0:b0 by local choice (reason=3)
ath0: direct probe to AP 00:11:95:77:e0:b0 (try 1)
ath0: RX AssocResp from 00:11:95:77:e0:b0 (capab=0x421 status=0 aid=2)
ath0: associated
------------[ cut here ]------------ WARNING: at net/wireless/mlme.c:97 cfg80211_send_rx_assoc+0x14d/0x152 [cfg80211]() Hardware name: 7658CTO ... Pid: 761, comm: phy0 Not tainted 2.6.32-trunk-686 #1 Call Trace: [<c1030a5d>] ? warn_slowpath_common+0x5e/0x8a [<c1030a93>] ? warn_slowpath_null+0xa/0xc [<f86cafc7>] ? cfg80211_send_rx_assoc+0x14d/0x152 ... ath0: link becomes ready ath0: deauthenticating from 00:11:95:77:e0:b0 by local choice (reason=3) ath0: no IPv6 routers present ath0: link is not ready ath0: direct probe to AP 00:11:95:77:e0:b0 (try 1) ath0: direct probe responded ath0: authenticate with AP 00:11:95:77:e0:b0 (try 1) ath0: authenticated ath0: associate with AP 00:11:95:77:e0:b0 (try 1) ath0: RX ReassocResp from 00:11:95:77:e0:b0 (capab=0x421 status=0 aid=2) ath0: associated
It is not clear to me how the first "direct probe" here happens, but this seems to be a race condition, if the user requests to deauth after requesting assoc, but before the assoc response is received. In that case, it may happen that mac80211 tries to report the assoc success to cfg80211, but gets blocked on the wdev lock that is held because the user is requesting the deauth.
The result is that we run into a warning. This is mostly harmless, but maybe cause an unexpected event to be sent to userspace; we'd send an assoc success event although userspace was no longer expecting that.
To fix this, remove the warning and check whether the race happened and in that case abort processing.
--- net/wireless/mlme.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
net/wireless/mlme.c +12 -1
@@ -93,7 +93,18 @@ void cfg80211_send_rx_assoc(struct net_d } } -WARN_ON (!bss); +/* +* We might be coming here because the driver reported +* a successful association at the same time as the +* user requested a deauth. In that case, we will have +* removed the BSS from the auth_bsses list due to the +* deauth request when the assoc response makes it. If +* the two code paths acquire the lock the other way +* around, that's just the standard situation of a +* deauth being requested while connected. +*/ +if (!bss) + goto out; }else if (wdev->conn) {cfg80211_sme_failed_assoc (wdev);/*
Quoted 5 lines · Johannes Berg
Hi,
Here are a few wireless fixes. I've sent all these before, but these are now rebased over the current wireless-testing tree.
1/3 of this series is already present in wireless-testing.git
Quoted 7 lines
johannes
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html