Skip to contentSkip to conversation

2.6.33-next build errors (x86_64 defconfig) on RHEL-4.3

DISCUSSION Martin Knoblauch 2 participants 3 messages Dec 28, 2009 – Dec 29, 2009

lore
Share & tools
lore
#0 lore raw

Hi,

when trying to build 2.6.32.2 or 2.6.33-next on RHEL-4.3(64-bit userland), I get the following errors (this is from 2.6.33-next-20091228):

================================

# make defconfig
# make CONFIG_DEBUG_SECTION_MISMATCH=y
  .
  .
  AS      arch/x86/lib/rwlock_64.o
  AS      arch/x86/lib/thunk_64.o
  CC      arch/x86/lib/usercopy_64.o
  AR      arch/x86/lib/lib.a
  LD      vmlinux.o
  MODPOST vmlinux.o
WARNING: vmlinux.o(.text+0xd2f04): Section mismatch in reference from the function hugetlb_register_node() to the function .init.text:hugetlb_sysfs_add_hstate()
The function hugetlb_register_node() references
the function __init hugetlb_sysfs_add_hstate().
This is often because hugetlb_register_node lacks a __init
annotation or the annotation of hugetlb_sysfs_add_hstate is wrong.

WARNING: vmlinux.o(.text+0x20805a): Section mismatch in reference from the function dmar_ir_support() to the variable .init.data:dmar_tbl The function dmar_ir_support() references
the variable __initdata dmar_tbl.
This is often because dmar_ir_support lacks a __initdata
annotation or the annotation of dmar_tbl is wrong.

WARNING: vmlinux.o(.text+0x222941): Section mismatch in reference from the function acpi_early_processor_set_pdc() to the variable .cpuinit.data:processor_idle_dmi_table The function acpi_early_processor_set_pdc() references
the variable __cpuinitdata processor_idle_dmi_table.
This is often because acpi_early_processor_set_pdc lacks a __cpuinitdata
annotation or the annotation of processor_idle_dmi_table is wrong.

WARNING: vmlinux.o(.text+0x410dce): Section mismatch in reference from the function pcibios_scan_specific_bus() to the function .devinit.text:pci_scan_bus_on_node() The function pcibios_scan_specific_bus() references
the function __devinit pci_scan_bus_on_node().
This is often because pcibios_scan_specific_bus lacks a __devinit
annotation or the annotation of pci_scan_bus_on_node is wrong.

  GEN     .version
  CHK     include/generated/compile.h
  UPD     include/generated/compile.h
  CC      init/version.o
  LD      init/built-in.o
  LD      .tmp_vmlinux1

drivers/built-in.o(.init.text+0x63ee): In function `con_init':
: undefined reference to `.L949'
make: *** [.tmp_vmlinux1] Error 1
================================

For 2.6.32.2 I only get the "undefined reference to `.L949' error.

And yes, I know that RHEL-4.3 is old. But it is still widely used.

# gcc -v
Reading specs from /usr/lib/gcc/x86_64-redhat-linux/3.4.5/specs
Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --disable-checking --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-java-awt=gtk --host=x86_64-redhat-linux
Thread model: posix
gcc version 3.4.5 20051201 (Red Hat 3.4.5-2)
# as -v
GNU assembler version 2.15.92.0.2 (x86_64-redhat-linux) using BFD version 2.15.92.0.2 20040927
# ldd -v
ldd: missing file arguments
Try `ldd --help' for more information.
#

Cheers
Martin
------------------------------------------------------
Martin Knoblauch

email: k n o b i AT knobisoft DOT de
www:   http://www.knobisoft.de
#1 lore raw

----- Original Message ----

Quoted 69 lines

From: Martin Knoblauch <[email protected]>
To: [email protected]
Cc: spam trap <[email protected]>
Sent: Mon, December 28, 2009 10:51:07 AM
Subject: 2.6.33-next build errors (x86_64 defconfig) on RHEL-4.3

Hi,

when trying to build 2.6.32.2 or 2.6.33-next on RHEL-4.3(64-bit userland), I get the following errors (this is from 2.6.33-next-20091228):

================================

# make defconfig
# make CONFIG_DEBUG_SECTION_MISMATCH=y
  .
  .
  AS      arch/x86/lib/rwlock_64.o
  AS      arch/x86/lib/thunk_64.o
  CC      arch/x86/lib/usercopy_64.o
  AR      arch/x86/lib/lib.a
  LD      vmlinux.o
  MODPOST vmlinux.o
WARNING: vmlinux.o(.text+0xd2f04): Section mismatch in reference from the 
function hugetlb_register_node() to the function 
.init.text:hugetlb_sysfs_add_hstate()
The function hugetlb_register_node() references
the function __init hugetlb_sysfs_add_hstate().
This is often because hugetlb_register_node lacks a __init
annotation or the annotation of hugetlb_sysfs_add_hstate is wrong.

WARNING: vmlinux.o(.text+0x20805a): Section mismatch in reference from the function dmar_ir_support() to the variable .init.data:dmar_tbl The function dmar_ir_support() references
the variable __initdata dmar_tbl.
This is often because dmar_ir_support lacks a __initdata annotation or the annotation of dmar_tbl is wrong.

WARNING: vmlinux.o(.text+0x222941): Section mismatch in reference from the function acpi_early_processor_set_pdc() to the variable .cpuinit.data:processor_idle_dmi_table
The function acpi_early_processor_set_pdc() references
the variable __cpuinitdata processor_idle_dmi_table.
This is often because acpi_early_processor_set_pdc lacks a __cpuinitdata annotation or the annotation of processor_idle_dmi_table is wrong.

WARNING: vmlinux.o(.text+0x410dce): Section mismatch in reference from the function pcibios_scan_specific_bus() to the function .devinit.text:pci_scan_bus_on_node()
The function pcibios_scan_specific_bus() references
the function __devinit pci_scan_bus_on_node().
This is often because pcibios_scan_specific_bus lacks a __devinit annotation or the annotation of pci_scan_bus_on_node is wrong.

  GEN     .version
  CHK     include/generated/compile.h
  UPD     include/generated/compile.h
  CC      init/version.o
  LD      init/built-in.o
  LD      .tmp_vmlinux1

drivers/built-in.o(.init.text+0x63ee): In function `con_init':
: undefined reference to `.L949'
make: *** [.tmp_vmlinux1] Error 1
================================

For 2.6.32.2 I only get the "undefined reference to `.L949' error.

And yes, I know that RHEL-4.3 is old. But it is still widely used.

Quoted 16 lines
# gcc -v
Reading specs from /usr/lib/gcc/x86_64-redhat-linux/3.4.5/specs
Configured with: ../configure --prefix=/usr --mandir=/usr/share/man 
--infodir=/usr/share/info --enable-shared --enable-threads=posix 
--disable-checking --with-system-zlib --enable-__cxa_atexit 
--disable-libunwind-exceptions --enable-java-awt=gtk --host=x86_64-redhat-linux
Thread model: posix
gcc version 3.4.5 20051201 (Red Hat 3.4.5-2)
# as -v
GNU assembler version 2.15.92.0.2 (x86_64-redhat-linux) using BFD version 
2.15.92.0.2 20040927
# ldd -v
ldd: missing file arguments
Try `ldd --help' for more information.
#

Not surprisingly, the problem still exists in next-20091229 :-) But actually, I think it might be even as old as 2.6.31-rc3. See

http://lkml.org/lkml/2009/7/14/120

for reference. Different (still older toolchain), but very similar failure.

@Andreas: did you ever had this resolved? I never saw a followup

Cheers
Martin

#2 lore raw

Hi,

Quoted 7 lines · Martin Knoblauch

Not surprisingly, the problem still exists in next-20091229 :-) But actually, I think it might be even as old as 2.6.31-rc3. See

http://lkml.org/lkml/2009/7/14/120

for reference. Different (still older toolchain), but very similar failure.

@Andreas: did you ever had this resolved? I never saw a followup

Sorry, I don't remember that any more (perhaps removing some CONFIG fixed it), especially since this problem was then overlayed by a __udivdi3 problem in the same low-versioned environment:
http://lkml.org/lkml/2009/10/9/230

I thus decommissioned that RHEL3 installation and downgraded to RHEL5 (it managed to do away with any custom kernel builds entirely, among other things - an interesting approach to fix the problem)

Andreas Mohr