New: megaraid_sas fills dmesg with megasas: Failed to copy out to user sense data
http://bugzilla.kernel.org/show_bug.cgi?id=15001
Summary: megaraid_sas fills dmesg with megasas: Failed to copy
out to user sense data
Product: SCSI Drivers
Version: 2.5
Kernel Version: 2.6.31.8 2.6.31.9 2.6.31.10
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Other
AssignedTo: [email protected]
ReportedBy: [email protected]
Regression: Yes
starting from 2.6.31.8 megaraid_sas driver fills dmesg with
megasas: Failed to copy out to user sense data
I donwloaded and build megaraid_sas from dell site : megaraid_sas-v00.00.04.17
but without any result , I still get this messages .
on 2.6.31.7 it worked just fine .
uname -a
Linux myhost 2.6.31.10-grsec #1 SMP Thu Jan 7 11:13:42 CET 2010 x86_64 GNU/Linux
modinfo megaraid_sas
filename:/lib/modules/2.6.31.10-grsec/kernel/drivers/scsi/megaraid/megaraid_sas.ko
description: LSI MegaRAID SAS Driver author: [email protected] version: 00.00.04.01 license: GPL srcversion: 78C40B2F67D5AE7885571F9 alias: pci:v00001028d00000015sv*sd*bc*sc*i* alias: pci:v00001000d00000413sv*sd*bc*sc*i* alias: pci:v00001000d00000079sv*sd*bc*sc*i* alias: pci:v00001000d00000078sv*sd*bc*sc*i* alias: pci:v00001000d0000007Csv*sd*bc*sc*i* alias: pci:v00001000d00000060sv*sd*bc*sc*i* alias: pci:v00001000d00000411sv*sd*bc*sc*i* depends: scsi_mod vermagic: 2.6.31.10-grsec SMP mod_unload modversions parm: poll_mode_io:Complete cmds from IO path, (default=0) (int)
#lspci
00:00.0 Host bridge: Intel Corporation QuickPath Architecture I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 1 (rev 13)
00:03.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 3 (rev 13)
00:04.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 4 (rev 13)
00:05.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 5 (rev 13)
00:06.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 6 (rev 13)
00:07.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 7 (rev 13)
00:14.0 PIC: Intel Corporation QuickPath Architecture I/O Hub System Management Registers (rev 13)
00:14.1 PIC: Intel Corporation QuickPath Architecture I/O Hub GPIO and Scratch Pad Registers (rev 13)
00:14.2 PIC: Intel Corporation QuickPath Architecture I/O Hub Control Status and RAS Registers (rev 13)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IB (ICH9) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IB (ICH9) 2 port SATA IDE Controller (rev 02)
01:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
01:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
02:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20)
03:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 1078 (rev
04)
04:00.0 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA (rev 03)
04:00.1 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA (rev 03)
07:03.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200eW WPCM450 [Hermon] - Winbond/Nuvoton (rev 0a)
Please tell me if you need any additional information . thank you ,
Alex
Signature · 3 lines
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching the assignee of the bug.
[Bug 15001] megaraid_sas fills dmesg with megasas: Failed to copy out to user sense data
http://bugzilla.kernel.org/show_bug.cgi?id=15001
--- Comment #1 from bo yang <[email protected]> 2010-01-08 16:21:12 --- We submited 4.12 driver to upstream which accepted by main stream 2.6.33. Is there available to try 4.12?
Thanks,
Bo Yang
Signature · 3 lines
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching the assignee of the bug.
[Bug 15001] megaraid_sas fills dmesg with megasas: Failed to copy out to user sense data
In reply to [email protected]http://bugzilla.kernel.org/show_bug.cgi?id=15001
--- Comment #2 from Alex <[email protected]> 2010-01-11 11:04:26 --- Created an attachment (id=24507)
--> (http://bugzilla.kernel.org/attachment.cgi?id=24507)
dmesg
dmesg
Signature · 3 lines
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching the assignee of the bug.
[Bug 15001] megaraid_sas fills dmesg with megasas: Failed to copy out to user sense data
In reply to [email protected]http://bugzilla.kernel.org/show_bug.cgi?id=15001
--- Comment #3 from Alex <[email protected]> 2010-01-11 11:12:51 --- Hello ,
so what I have done :
I copied megaraid directory from 2.6.33-rc3 and compiled module
here is my Makefile
obj-$(CONFIG_MEGARAID_MM) += megaraid_mm.o
obj-$(CONFIG_MEGARAID_MAILBOX) += megaraid_mbox.o
obj-$(CONFIG_MEGARAID_SAS) += megaraid_sas.o
KDIR := /lib/modules/2.6.31.11-grsec/build
PWD := $(shell pwd)
default:
$(MAKE) -C $(KDIR) SUBDIRS=$(PWD) CONFIG_DEBUG_SECTION_MISMATCH=ymodules
and here is the make's output
/home/pkg/megaraid/megaraid# make
make -C /lib/modules/2.6.31.11-grsec/build SUBDIRS=/home/pkg/megaraid/megaraid CONFIG_DEBUG_SECTION_MISMATCH=y modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.31.11-grsec'
Building modules, stage 2.
MODPOST 1 modules
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x30): Section mismatch in reference from the variable megasas_pci_driver to the function .text:megasas_suspend()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x48): Section mismatch in reference from the variable megasas_pci_driver to the function .text:megasas_resume()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x50): Section mismatch in reference from the variable megasas_pci_driver to the function .text:megasas_shutdown()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0xf8): Section mismatch in reference from the variable driver_attr_poll_mode_io to the function .text:megasas_sysfs_show_poll_mode_io()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x100): Section mismatch in reference from the variable driver_attr_poll_mode_io to the function .text:megasas_sysfs_set_poll_mode_io()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x128): Section mismatch in reference from the variable driver_attr_dbg_lvl to the function .text:megasas_sysfs_show_dbg_lvl()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x130): Section mismatch in reference from the variable driver_attr_dbg_lvl to the function .text:megasas_sysfs_set_dbg_lvl()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x158): Section mismatch in reference from the variable driver_attr_release_date to the function .text:megasas_sysfs_show_release_date()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x188): Section mismatch in reference from the variable driver_attr_version to the function .text:megasas_sysfs_show_version()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x1f8): Section mismatch in reference from the variable megasas_template to the function .text:megasas_queue_command()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x210): Section mismatch in reference from the variable megasas_template to the function .text:megasas_reset_device()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x220): Section mismatch in reference from the variable megasas_template to the function .text:megasas_reset_bus_host()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x228): Section mismatch in reference from the variable megasas_template to the function .text:megasas_reset_bus_host()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x230): Section mismatch in reference from the variable megasas_template to the function .text:megasas_slave_alloc()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x238): Section mismatch in reference from the variable megasas_template to the function .text:megasas_slave_configure()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x278): Section mismatch in reference from the variable megasas_template to the function .text:megasas_bios_param()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x288): Section mismatch in reference from the variable megasas_template to the function .text:megasas_reset_timer()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x2f0): Section mismatch in reference from the variable megasas_instance_template_ppc to the function .text:megasas_fire_cmd_ppc()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x2f8): Section mismatch in reference from the variable megasas_instance_template_ppc to the function .text:megasas_enable_intr_ppc()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x300): Section mismatch in reference from the variable megasas_instance_template_ppc to the function .text:megasas_disable_intr_ppc()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x308): Section mismatch in reference from the variable megasas_instance_template_ppc to the function .text:megasas_clear_intr_ppc()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x310): Section mismatch in reference from the variable megasas_instance_template_ppc to the function .text:megasas_read_fw_status_reg_ppc()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x320): Section mismatch in reference from the variable megasas_instance_template_gen2 to the function .text:megasas_fire_cmd_gen2()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x328): Section mismatch in reference from the variable megasas_instance_template_gen2 to the function .text:megasas_enable_intr_gen2()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x330): Section mismatch in reference from the variable megasas_instance_template_gen2 to the function .text:megasas_disable_intr_gen2()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x338): Section mismatch in reference from the variable megasas_instance_template_gen2 to the function .text:megasas_clear_intr_gen2()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x340): Section mismatch in reference from the variable megasas_instance_template_gen2 to the function .text:megasas_read_fw_status_reg_gen2()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x350): Section mismatch in reference from the variable megasas_instance_template_skinny to the function .text:megasas_fire_cmd_skinny()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x358): Section mismatch in reference from the variable megasas_instance_template_skinny to the function .text:megasas_enable_intr_skinny()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x360): Section mismatch in reference from the variable megasas_instance_template_skinny to the function .text:megasas_disable_intr_skinny()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x368): Section mismatch in reference from the variable megasas_instance_template_skinny to the function .text:megasas_clear_intr_skinny()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x370): Section mismatch in reference from the variable megasas_instance_template_skinny to the function .text:megasas_read_fw_status_reg_skinny()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x380): Section mismatch in reference from the variable megasas_instance_template_xscale to the function .text:megasas_fire_cmd_xscale()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x388): Section mismatch in reference from the variable megasas_instance_template_xscale to the function .text:megasas_enable_intr_xscale()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x390): Section mismatch in reference from the variable megasas_instance_template_xscale to the function .text:megasas_disable_intr_xscale()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x398): Section mismatch in reference from the variable megasas_instance_template_xscale to the function .text:megasas_clear_intr_xscale()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x3a0): Section mismatch in reference from the variable megasas_instance_template_xscale to the function .text:megasas_read_fw_status_reg_xscale()
WARNING: /home/pkg/megaraid/megaraid/megaraid_sas.o(.data+0x3c8): Section mismatch in reference from the variable driver_attr_support_poll_for_event to the function .text:megasas_sysfs_show_support_poll_for_event()
make[1]: Leaving directory `/usr/src/linux-headers-2.6.31.11-grsec'
than I copied megaraid_sas.ko to modules tree and run update-initramfs -uv
after reboot :
uname -a
Linux mydb 2.6.31.11-grsec #1 SMP Fri Jan 8 10:22:54 CET 2010 x86_64 GNU/Linux
modinfo megaraid_sas
filename:/lib/modules/2.6.31.11-grsec/kernel/misc/megaraid/megaraid_sas.ko
description: LSI MegaRAID SAS Driver author: [email protected] version: 00.00.04.12-rc1 license: GPL srcversion: 4B304EFDDEF265C4DB3635B alias: pci:v00001028d00000015sv*sd*bc*sc*i* alias: pci:v00001000d00000413sv*sd*bc*sc*i* alias: pci:v00001000d00000071sv*sd*bc*sc*i* alias: pci:v00001000d00000073sv*sd*bc*sc*i* alias: pci:v00001000d00000079sv*sd*bc*sc*i* alias: pci:v00001000d00000078sv*sd*bc*sc*i* alias: pci:v00001000d0000007Csv*sd*bc*sc*i* alias: pci:v00001000d00000060sv*sd*bc*sc*i* alias: pci:v00001000d00000411sv*sd*bc*sc*i* depends: scsi_mod vermagic: 2.6.31.11-grsec SMP mod_unload parm: poll_mode_io:Complete cmds from IO path, (default=0) (int)
I still get this messages
megasas: Failed to copy out to user sense data
the same was for 4.17 version which I got from dell site .
dmesg is attached .
and what does this message mean ?
is it harmless ?
Thank you .
Regards ,
Alex
Signature · 3 lines
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching the assignee of the bug.
[Bug 15001] megaraid_sas fills dmesg with megasas: Failed to copy out to user sense data
In reply to [email protected]http://bugzilla.kernel.org/show_bug.cgi?id=15001
[email protected] changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |[email protected]
--- Comment #4 from [email protected] 2010-01-15 12:09:43 --- This is a "me too" post...
I have a problem since the commit (SCSI: megaraid_sas: fix 64 bit sense pointer truncation) with several Dell 2950 Servers. It happens both on the Perc 5/i and the Perc 6/i controllers. All of these machines have 8GB RAM and are running x86_64 kernels (currently 2.6.32.2). I always get messages like this in the Kernel Log (plus on the console, which is VERY annoying:
[69274.972038] megasas: Failed to copy out to user sense data [69274.972182] megasas: Failed to copy out to user sense data [71168.206030] megasas: Failed to copy out to user sense data [71168.206175] megasas: Failed to copy out to user sense data
It happens about 2-5 times per hour, most of the time several of those errors (2-3) are reported in close timely vicinity, like within a few seconds. Other than this these servers seem to be stable, so i guess it is a spurious message caused by above commit. Replacing megaraid_sas.c with the version from Kernel 2.6.32 cures the problem.
I've also tried using version v00.00.04.12-rc1 of megaraid_sas.c (and .h) from Kernel 2.6.33-rc3 and i can confirm that it shows the same problems on my hardware:
[70120.567013] megasas: Failed to copy out to user sense data [70120.576426] megasas: Failed to copy out to user sense data [70120.576869] megasas: Failed to copy out to user sense data [70120.587822] megasas: Failed to copy out to user sense data
Signature · 3 lines
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching the assignee of the bug.
[Bug 15001] megaraid_sas fills dmesg with megasas: Failed to copy out to user sense data
In reply to [email protected]http://bugzilla.kernel.org/show_bug.cgi?id=15001
--- Comment #5 from Tomas Henzl <[email protected]> 2010-02-03 13:41:44 --- Created an attachment (id=24890)
--> (http://bugzilla.kernel.org/attachment.cgi?id=24890)
patch to handle compat apps
The issue is probably caused by a 32bit application in a 64bit os. The 'open manage' here uses a 32bit pointer and the driver after the 'SCSI: megaraid_sas:
fix 64 bit sense pointer truncation' works with it as if it was a 64bit pointer.
The attached patch handles the situation on my test box.
Signature · 3 lines
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching the assignee of the bug.
[Bug 15001] megaraid_sas fills dmesg with megasas: Failed to copy out to user sense data
In reply to [email protected]http://bugzilla.kernel.org/show_bug.cgi?id=15001
--- Comment #6 from Alex <[email protected]> 2010-02-04 11:00:54 --- (In reply to comment #5)
Quoted 1 line
Created an attachment (id=24890)
--> (http://bugzilla.kernel.org/attachment.cgi?id=24890) [details]
Quoted 7 lines
patch to handle compat apps
The issue is probably caused by a 32bit application in a 64bit os. The 'open manage' here uses a 32bit pointer and the driver after the 'SCSI:
megaraid_sas:
fix 64 bit sense pointer truncation' works with it as if it was a 64bit pointer.
The attached patch handles the situation on my test box.
thank you for the patch , it handles the issue , tested on 2.6.32.7 .
Signature · 3 lines
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching the assignee of the bug.
[Bug 15001] megaraid_sas fills dmesg with megasas: Failed to copy out to user sense data
In reply to [email protected]http://bugzilla.kernel.org/show_bug.cgi?id=15001
--- Comment #7 from Tomas Henzl <[email protected]> 2010-02-04 13:22:20 --- (In reply to comment #6)
Quoted 1 line
thank you for the patch , it handles the issue , tested on 2.6.32.7 .
That means that you no more see the
"megasas: Failed to copy out to user sense data"
or have you also verified that the management software works as expected?
Signature · 3 lines
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching the assignee of the bug.
[Bug 15001] megaraid_sas fills dmesg with megasas: Failed to copy out to user sense data
In reply to [email protected]http://bugzilla.kernel.org/show_bug.cgi?id=15001
--- Comment #8 from Alex <[email protected]> 2010-02-04 14:29:46 --- (In reply to comment #7)
Quoted 5 lines
(In reply to comment #6)
Quoted 1 line
thank you for the patch , it handles the issue , tested on 2.6.32.7 .
That means that you no more see the
"megasas: Failed to copy out to user sense data"
Yes , that means that I don't see this message any more , and what does it mean "Failed to copy out to user sense data" ?
Quoted 1 line
or have you also verified that the management software works as expected?
And I still can retrieve information with MegaCli utility , should I check something special ?
Signature · 3 lines
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching the assignee of the bug.
[Bug 15001] megaraid_sas fills dmesg with megasas: Failed to copy out to user sense data
In reply to [email protected]http://bugzilla.kernel.org/show_bug.cgi?id=15001
--- Comment #9 from Tomas Henzl <[email protected]> 2010-02-04 15:36:13 --- (In reply to comment #8)
Quoted 8 lines
(In reply to comment #7)
Quoted 5 lines
(In reply to comment #6)
Quoted 1 line
thank you for the patch , it handles the issue , tested on 2.6.32.7 .
That means that you no more see the
"megasas: Failed to copy out to user sense data"Yes , that means that I don't see this message any more , and what does it mean "Failed to copy out to user sense data" ?
That means that the function copy_to_user in the driver failed and the ioctl returned EFAULT. Usually programs can cope with that, but it could mean that they are not able to collect informations from that device.
Quoted 3 lines
Quoted 1 line
or have you also verified that the management software works as expected?
And I still can retrieve information with MegaCli utility , should I check something special ?
I'm not sure with MegaCli, what I meant here is the Dell management sw 'Open Manage', so if you can check if this sw can collect info from megaraid driver.
Signature · 3 lines
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching the assignee of the bug.
[Bug 15001] megaraid_sas fills dmesg with megasas: Failed to copy out to user sense data
In reply to [email protected]http://bugzilla.kernel.org/show_bug.cgi?id=15001
--- Comment #10 from Alex <[email protected]> 2010-02-05 07:34:50 --- (In reply to comment #9)
Quoted 13 lines
(In reply to comment #8)
Quoted 8 lines
(In reply to comment #7)
Quoted 5 lines
(In reply to comment #6)
Quoted 1 line
thank you for the patch , it handles the issue , tested on 2.6.32.7 .
That means that you no more see the
"megasas: Failed to copy out to user sense data"Yes , that means that I don't see this message any more , and what does it mean "Failed to copy out to user sense data" ?
That means that the function
copy_to_userin the driver failed and the ioctl returned EFAULT. Usually programs can cope with that, but it could mean that they are not able to collect informations from that device.
Quoted 5 lines
Quoted 3 lines
Quoted 1 line
or have you also verified that the management software works as expected?
And I still can retrieve information with MegaCli utility , should I check something special ?
I'm not sure with MegaCli, what I meant here is the Dell management sw 'Open Manage', so if you can check if this sw can collect info from megaraid driver.
I guess it is ok ,
OMSA is 6.0.1-8 . For example
omreport storage vdisk
omreport storage pdisk controller=0
works as expected .
Signature · 3 lines
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching the assignee of the bug.
[Bug 15001] megaraid_sas fills dmesg with megasas: Failed to copy out to user sense data
In reply to [email protected]http://bugzilla.kernel.org/show_bug.cgi?id=15001
Alex <[email protected]> changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |RESOLVED
Resolution| |PATCH_ALREADY_AVAILABLESignature · 3 lines
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching the assignee of the bug.
[Bug 15001] megaraid_sas fills dmesg with megasas: Failed to copy out to user sense data
In reply to [email protected]http://bugzilla.kernel.org/show_bug.cgi?id=15001
--- Comment #11 from Tomas Henzl <[email protected]> 2010-02-05 14:51:36 --- (In reply to comment #10)
Quoted 5 lines
I guess it is ok ,
OMSA is 6.0.1-8 . For example
omreport storage vdisk
omreport storage pdisk controller=0
works as expected .
OK, thanks for testing.
Signature · 3 lines
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching the assignee of the bug.
[Bug 15001] megaraid_sas fills dmesg with megasas: Failed to copy out to user sense data
In reply to [email protected]http://bugzilla.kernel.org/show_bug.cgi?id=15001
--- Comment #12 from [email protected] 2010-02-11 13:30:16 --- Applied the patch on all our systems which were exhibiting this bug. The error message in dmesg is gone now. Dell OMSA still works as expected, including omreport and the Dell OpenManage Web Application.
Thanks for the fast fix!
Signature · 3 lines
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching the assignee of the bug.