mwl8k: add 5 GHz band channels and rates
PATCH 8/17 mwl8k: add 5 GHz band channels and rates
Signed-off-by Lennert Buytenhek <[email protected]>
--- drivers/net/wireless/mwl8k.c | 41 +++++++++++++++++++++++++++++++++++++++++ 1 files changed, 41 insertions(+), 0 deletions(-)
drivers/net/wireless/mwl8k.c +41 -0
@@ -144,6 +144,9 @@ struct mwl8k_priv {struct ieee80211_supported_band band_24;struct ieee80211_channel channels_24[14 ];struct ieee80211_rate rates_24[14 ]; +struct ieee80211_supported_band band_50; +struct ieee80211_channel channels_50[4 ]; +struct ieee80211_rate rates_50[9 ];/* firmware access */ struct mutex fw_mutex;
@@ -252,6 +255,25 @@ static const struct ieee80211_rate mwl8k_rates_24[] = { { .bitrate = 720, .hw_value = 144, }, }; +static const struct ieee80211_channel mwl8k_channels_50[] = { + { .center_freq =5180 , .hw_value =36 , }, + { .center_freq =5200 , .hw_value =40 , }, + { .center_freq =5220 , .hw_value =44 , }, + { .center_freq =5240 , .hw_value =48 , }, +}; + +static const struct ieee80211_rate mwl8k_rates_50[] = { + { .bitrate =60 , .hw_value =12 , }, + { .bitrate =90 , .hw_value =18 , }, + { .bitrate =120 , .hw_value =24 , }, + { .bitrate =180 , .hw_value =36 , }, + { .bitrate =240 , .hw_value =48 , }, + { .bitrate =360 , .hw_value =72 , }, + { .bitrate =480 , .hw_value =96 , }, + { .bitrate =540 , .hw_value =108 , }, + { .bitrate =720 , .hw_value =144 , }, +}; +/* Set or get info from Firmware */ #define MWL8K_CMD_SET 0x0001#define MWL8K_CMD_GET 0x0000
@@ -1579,6 +1601,25 @@ static void mwl8k_setup_2ghz_band(struct ieee80211_hw *hw) hw->wiphy->bands[IEEE80211_BAND_2GHZ ] = &priv->band_24; } +static void mwl8k_setup_5ghz_band (struct ieee80211_hw *hw) +{ +struct mwl8k_priv *priv = hw->priv; + +BUILD_BUG_ON (sizeof (priv->channels_50) !=sizeof (mwl8k_channels_50)); +memcpy (priv->channels_50, mwl8k_channels_50,sizeof (mwl8k_channels_50)); + +BUILD_BUG_ON (sizeof (priv->rates_50) !=sizeof (mwl8k_rates_50)); +memcpy (priv->rates_50, mwl8k_rates_50,sizeof (mwl8k_rates_50)); + + priv->band_50.band =IEEE80211_BAND_5GHZ ; + priv->band_50.channels = priv->channels_50; + priv->band_50.n_channels =ARRAY_SIZE (mwl8k_channels_50); + priv->band_50.bitrates = priv->rates_50; + priv->band_50.n_bitrates =ARRAY_SIZE (mwl8k_rates_50); + + hw->wiphy->bands[IEEE80211_BAND_5GHZ ] = &priv->band_50; +} +/* * CMD_GET_HW_SPEC (STA version). */
Signature · 1 line
1.5.6.4