i2c-i801: SMBus patch for Intel Cougar Point DeviceIDs
PATCH 1/1 i2c-i801: SMBus patch for Intel Cougar Point DeviceIDs
This patch adds the Intel Cougar Point (PCH) SMBus Controller DeviceIDs.
drivers/i2c/busses/i2c-i801.c renamed from drivers/i2c/busses/i2c-i801.c.orig +4 -1
@@ -41,7 +41,8 @@ Tolapai 0x5032 32 hard yes yes yes ICH10 0x3a30 32 hard yes yes yes ICH10 0x3a60 32 hard yes yes yes - PCH 0x3b30 32 hard yes yes yes + 3400/5 Series (PCH) 0x3b30 32 hard yes yes yes + CPT 0x1c22 32 hard yes yes yes Features supported by this driver: Software PEC no
@@ -578,6 +579,7 @@ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PCH_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CPT_SMBUS) }, { 0, } };
@@ -707,6 +709,7 @@case PCI_DEVICE_ID_INTEL_ICH10_4 :case PCI_DEVICE_ID_INTEL_ICH10_5 :case PCI_DEVICE_ID_INTEL_PCH_SMBUS : +case PCI_DEVICE_ID_INTEL_CPT_SMBUS : i801_features |=FEATURE_I2C_BLOCK_READ ;/* fall through */ case PCI_DEVICE_ID_INTEL_82801DB_3 :
drivers/i2c/busses/Kconfig renamed from drivers/i2c/busses/Kconfig.orig +1 -0
@@ -98,6 +98,7 @@ Tolapai ICH10 PCH + CPT This driver can also be built as a module. If so, the module will be called i2c-i801.
Seems like Jean or Ben should take this.
Jesse
Quoted 48 lines · On Tue, 12 Jan 2010 16:58:53 -0800 Seth Heasley <[email protected]> wrote:
This patch adds the Intel Cougar Point (PCH) SMBus Controller DeviceIDs.
Signed-off-by Seth Heasley <[email protected]>--- linux-2.6.32.3/drivers/i2c/busses/i2c-i801.c.orig
2010-01-06 15:07:45.000000000 -0800 +++ linux-2.6.32.3/drivers/i2c/busses/i2c-i801.c 2010-01-07 13:10:28.000000000 -0800 @@ -41,7 +41,8 @@ Tolapai 0x5032 32 hard yes yes yes ICH10 0x3a30 32 hard yes yes yes ICH10 0x3a60 32 hard yes yes yes - PCH 0x3b30 32 hard yes yesyes
+ 3400/5 Series (PCH)0x3b3032 hard yes yes
yes
+ CPT0x1c2232 hard yes yes
yes
Features supported by this driver:
Software PEC nodrivers/i2c/busses/i2c-i801.c renamed from drivers/i2c/busses/i2c-i801.c.orig +2
-1@@ -578,6 +579,7 @@ {PCI_DEVICE (PCI_VENDOR_ID_INTEL , PCI_DEVICE_ID_INTEL_ICH10_4) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PCH_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CPT_SMBUS) }, { 0, } };@@ -707,6 +709,7 @@case PCI_DEVICE_ID_INTEL_ICH10_4 :case PCI_DEVICE_ID_INTEL_ICH10_5 :case PCI_DEVICE_ID_INTEL_PCH_SMBUS : +case PCI_DEVICE_ID_INTEL_CPT_SMBUS : i801_features |=FEATURE_I2C_BLOCK_READ ;/* fall through */ case PCI_DEVICE_ID_INTEL_82801DB_3 : --- linux-2.6.32.3/drivers/i2c/busses/Kconfig.orig 2010-01-0615:07:45.000000000 -0800 +++
linux-2.6.32.3/drivers/i2c/busses/Kconfig 2010-01-07
13:10:28.000000000 -0800 @@ -98,6 +98,7 @@ Tolapaidrivers/i2c/busses/Kconfig renamed from drivers/i2c/busses/Kconfig.orig +1
-0ICH10 PCH + CPT This driver can also be built as a module. If so, themodule will be called i2c-i801.
Signature · 1 line
Jesse Barnes, Intel Open Source Technology Center
Quoted 1 line · Jesse Barnes
Seems like Jean or Ben should take this.
I'll take it. I was only waiting for you to pick the PCI device defines first.
Signature · 1 line
Jean Delvare
Hi Seth,
Please note that the i2c mailing list address has changed.
Quoted 1 line · Seth Heasley
This patch adds the Intel Cougar Point (PCH) SMBus Controller DeviceIDs.
This comment suggests that Cougar Point == PCH, while the comments in i2c-i801 suggests otherwise. Who is right?
Quoted 34 lines
Signed-off-by Seth Heasley <[email protected]>drivers/i2c/busses/i2c-i801.c renamed from drivers/i2c/busses/i2c-i801.c.orig +4
-1@@ -41,7 +41,8 @@ Tolapai 0x5032 32 hard yes yes yes ICH10 0x3a30 32 hard yes yes yes ICH10 0x3a60 32 hard yes yes yes - PCH 0x3b30 32 hard yes yes yes + 3400/5 Series (PCH) 0x3b30 32 hard yes yes yes + CPT 0x1c22 32 hard yes yes yes Features supported by this driver: Software PEC no@@ -578,6 +579,7 @@ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PCH_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CPT_SMBUS) }, { 0, } };@@ -707,6 +709,7 @@case PCI_DEVICE_ID_INTEL_ICH10_4 :case PCI_DEVICE_ID_INTEL_ICH10_5 :case PCI_DEVICE_ID_INTEL_PCH_SMBUS : +case PCI_DEVICE_ID_INTEL_CPT_SMBUS : i801_features |=FEATURE_I2C_BLOCK_READ ;/* fall through */ case PCI_DEVICE_ID_INTEL_82801DB_3 :
drivers/i2c/busses/Kconfig line 101
Quoted 4 lines
drivers/i2c/busses/Kconfig renamed from drivers/i2c/busses/Kconfig.orig +1
-0@@ -98,6 +98,7 @@ Tolapai ICH10 PCH + CPT
It might be clear for you that "CPT" means "Cougar Point", but for the reader it may not be. I'd rather list the full chip name. Same in i2c-i801.c's header comment, BTW.
drivers/i2c/busses/Kconfig line 104
Quoted 3 lines
drivers/i2c/busses/Kconfig renamed from drivers/i2c/busses/Kconfig.orig +0
-0This driver can also be built as a module. If so, the module will be called i2c-i801.
Documentation/i2c/busses/i2c-i801 needs to be updated as well.
Signature · 1 line
Jean Delvare