SMDK6410: Specify no GPIO for B_PWR_5V regulator
Subsystems (2)
PATCH 1/1 SMDK6410: Specify no GPIO for B_PWR_5V regulator
Since the fixed voltage regulator grew support for GPIO based enables and GPIO 0 is valid on some systems we need to specify that there is no valid GPIO enable control.
---
Sorry, resend due to thinkoed list address.
arch/arm/mach-s3c6410/mach-smdk6410.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
arch/arm/mach-s3c6410/mach-smdk6410.c +1 -0
@@ -211,6 +211,7 @@ static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = { .supply_name = "B_PWR_5V", .microvolts = 5000000, .init_data = &smdk6410_b_pwr_5v_data, + .gpio = -EINVAL, };static struct platform_device smdk6410_b_pwr_5v = {
Signature · 1 line
1.6.6
PATCH 1/1 SMDK6410: Specify no GPIO for B_PWR_5V regulator
Quoted 3 lines · Mark Brown
Since the fixed voltage regulator grew support for GPIO based enables and GPIO 0 is valid on some systems we need to specify that there is no valid GPIO enable control.
should this be posted for -rc?
Quoted 28 lines
Signed-off-by Mark Brown <[email protected]>---
Sorry, resend due to thinkoed list address.
arch/arm/mach-s3c6410/mach-smdk6410.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)arch/arm/mach-s3c6410/mach-smdk6410.c +1
-0@@ -211,6 +211,7 @@ static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = { .supply_name = "B_PWR_5V", .microvolts = 5000000, .init_data = &smdk6410_b_pwr_5v_data, + .gpio = -EINVAL, };static struct platform_device smdk6410_b_pwr_5v = {Signature · 7 lines
1.6.6 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel at lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Signature · 5 lines
-- Ben Q: What's a light-year? A: One-third less calories than a regular year.
PATCH 1/1 SMDK6410: Specify no GPIO for B_PWR_5V regulator
Quoted 6 lines · Ben Dooks
Quoted 3 lines · Mark Brown
Since the fixed voltage regulator grew support for GPIO based enables and GPIO 0 is valid on some systems we need to specify that there is no valid GPIO enable control.
should this be posted for -rc?
Yes.