ARM: LPC32XX: Changes to existing files to support the LPC32XX architecture

Changes to existing files to support the new LPC32XX architecture

---
  arch/arm/Kconfig           |   16 ++++++++++++++++
  arch/arm/Makefile          |    1 +
  drivers/i2c/busses/Kconfig |    4 ++--
  drivers/watchdog/Kconfig   |    6 +++---
  include/linux/amba/clcd.h  |    3 ++-
  5 files changed, 24 insertions(+), 6 deletions(-)

index 4c33ca8..cc2dbf9 100644
@@ -550,6 +550,20 @@ config ARCH_W90X900
  	  <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
  		 

ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>

+config ARCH_LPC32XX
+ bool "NXP LPC32XX"
+ select CPU_ARM926T
+ select ARCH_REQUIRE_GPIOLIB
+ select GENERIC_GPIO
+ select HAVE_IDE
+ select ARM_AMBA
+ select USB_ARCH_HAS_OHCI
+ select COMMON_CLKDEV
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ help
+ Support for the NXP LPC32XX family of processors
+
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile" select CPU_ARM926T
@@ -771,6 +785,8 @@ source "arch/arm/mach-lh7a40x/Kconfig"

source "arch/arm/mach-loki/Kconfig"

+source "arch/arm/mach-lpc32xx/Kconfig"
+
source "arch/arm/mach-msm/Kconfig"

source "arch/arm/mach-mv78xx0/Kconfig"

index 9e75825..b6ec4f7 100644
@@ -139,6 +139,7 @@ machine-$(CONFIG_ARCH_KS8695)		:=  

ks8695
machine-$(CONFIG_ARCH_L7200) := l7200
machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x
machine-$(CONFIG_ARCH_LOKI) := loki
+machine-$(CONFIG_ARCH_LPC32XX) := lpc32xx
machine-$(CONFIG_ARCH_MMP) := mmp
machine-$(CONFIG_ARCH_MSM) := msm
machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0

index 5f318ce..590a441 100644
@@ -467,8 +467,8 @@ config I2C_PASEMI
  	  Supports the PA Semi PWRficient on-chip SMBus interfaces.
 
  config I2C_PNX
-	tristate "I2C bus support for Philips PNX targets"
-	depends on ARCH_PNX4008
+	tristate "I2C bus support for Philips/NXP devices"
+	depends on ARCH_PNX4008 || ARCH_LPC32XX
  	help
  	  This driver supports the Philips IP3204 I2C IP block master  

and/or
slave controller

index 050ee14..3019415 100644
@@ -200,11 +200,11 @@ config OMAP_WATCHDOG
  	  here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430  

watchdog timer.

config PNX4008_WATCHDOG
- tristate "PNX4008 Watchdog"
- depends on ARCH_PNX4008
+ tristate "PNX4008/LPC32XX Watchdog"
+ depends on ARCH_PNX4008 || ARCH_LPC32XX
help
Say Y here if to include support for the watchdog timer
- in the PNX4008 processor.
+ in the PNX4008 or LPC32XX processors.
This driver can be built as a module by choosing M. The module will be called pnx4008_wdt.

index 29c0448..8d0d491 100644
@@ -21,7 +21,8 @@
  #define CLCD_UBAS 		0x00000010
  #define CLCD_LBAS 		0x00000014
 
-#if !defined(CONFIG_ARCH_VERSATILE) && !defined(CONFIG_ARCH_REALVIEW)
+#if !defined(CONFIG_ARCH_VERSATILE) && !defined(CONFIG_ARCH_REALVIEW)\
+	&& !defined(CONFIG_ARCH_LPC32XX)
  #define CLCD_IENB 		0x00000018
  #define CLCD_CNTL 		0x0000001c
  #else

1.6.6

Please don't post patches across multiple susbsytems, they're a pain to merge. Please break the i2c and wdt bits out of this patch.

Ben

Q:      What's a light-year?
A:      One-third less calories than a regular year.