USB: ftdi_sio: Remove BKL
Subsystems (2)
PATCH 1/1 USB: ftdi_sio: Remove BKL
Seems to me that BKL don't protect nothing here anymore. So I would want suggest to remove it.
Signed-off-by Alessio Igor Bogani <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc Johan Hovold <[email protected]>
Cc Alan Cox <[email protected]>
Cc Daniel Mack <[email protected]>
Cc Andrew Morton <[email protected]>
--- drivers/usb/serial/ftdi_sio.c | 7 ------- 1 files changed, 0 insertions(+), 7 deletions(-)
drivers/usb/serial/ftdi_sio.c +0 -7
@@ -33,7 +33,6 @@#include <linux/errno.h> #include <linux/init.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <linux/tty.h> #include <linux/tty_driver.h> #include <linux/tty_flip.h>
@@ -1210,7 +1209,6 @@ static int set_serial_info(struct tty_struct *tty,if (copy_from_user (&new_serial, newinfo,sizeof (new_serial)))return -EFAULT ; -lock_kernel (); old_priv = *priv;/* Do error checking and permission checking */
@@ -1218,7 +1216,6 @@ static int set_serial_info(struct tty_struct *tty,if (!capable (CAP_SYS_ADMIN )) {if (((new_serial.flags & ~ASYNC_USR_MASK ) != (priv->flags & ~ASYNC_USR_MASK ))) { -unlock_kernel ();return -EPERM ; } priv->flags = ((priv->flags & ~ASYNC_USR_MASK) |
@@ -1229,7 +1226,6 @@ static int set_serial_info(struct tty_struct *tty,if ((new_serial.baud_base != priv->baud_base) && (new_serial.baud_base <9600 )) { -unlock_kernel ();return -EINVAL ; }
@@ -1259,11 +1255,8 @@ check_and_exit: (priv->flags & ASYNC_SPD_MASK)) || (((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) && (old_priv.custom_divisor != priv->custom_divisor))) { -unlock_kernel ();change_speed (tty, port); } - else -unlock_kernel ();return 0 ; }/* set_serial_info */
Signature · 1 line
1.6.3.3
Quoted 1 line · On Tue, 2 Feb 2010 14:58:14 +0100 Alessio Igor Bogani <[email protected]>…
Seems to me that BKL don't protect nothing here anymore. So I would want suggest to remove it.
What now stops parallel calls to the config ioctl making a nasty mess ?
The current locking is broken certainly, but removing it is not the fix (the speed locking is broken too on that path I notice)
Alan
PATCH 1/1 USB: ftdi_sio: Replace BKL with a mutex
As Alan Cox have pinpointed the driver still required protection against parallels calls to the config ioctl(). If lock is still necessary the use of BKL is abused here. So replace BKL with a more convenient mutex.
Signed-off-by Alessio Igor Bogani <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc Johan Hovold <[email protected]>
Cc Alan Cox <[email protected]>
Cc Daniel Mack <[email protected]>
Cc Andrew Morton <[email protected]>
--- drivers/usb/serial/ftdi_sio.c | 14 ++++++++------ 1 files changed, 8 insertions(+), 6 deletions(-)
drivers/usb/serial/ftdi_sio.c +8 -6
@@ -33,12 +33,12 @@#include <linux/errno.h> #include <linux/init.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <linux/tty.h> #include <linux/tty_driver.h> #include <linux/tty_flip.h> #include <linux/module.h> #include <linux/spinlock.h> +#include <linux/mutex.h> #include <linux/uaccess.h> #include <linux/usb.h> #include <linux/serial.h>
@@ -92,6 +92,7 @@ struct ftdi_private {unsigned long tx_outstanding_bytes;unsigned long tx_outstanding_urbs;unsigned short max_packet_size; +struct mutex cfg_lock;/* Avoid mess by parallel calls of config ioctl() */ };/* struct ftdi_sio_quirk is used by devices requiring special attention. */
@@ -1210,7 +1211,7 @@ static int set_serial_info(struct tty_struct *tty,if (copy_from_user (&new_serial, newinfo,sizeof (new_serial)))return -EFAULT ; -lock_kernel (); +mutex_lock (&priv->cfg_lock); old_priv = *priv;/* Do error checking and permission checking */
@@ -1218,7 +1219,7 @@ static int set_serial_info(struct tty_struct *tty,if (!capable (CAP_SYS_ADMIN )) {if (((new_serial.flags & ~ASYNC_USR_MASK ) != (priv->flags & ~ASYNC_USR_MASK ))) { -unlock_kernel (); +mutex_unlock (&priv->cfg_lock);return -EPERM ; } priv->flags = ((priv->flags & ~ASYNC_USR_MASK) |
@@ -1229,7 +1230,7 @@ static int set_serial_info(struct tty_struct *tty,if ((new_serial.baud_base != priv->baud_base) && (new_serial.baud_base <9600 )) { -unlock_kernel (); +mutex_unlock (&priv->cfg_lock);return -EINVAL ; }
@@ -1259,11 +1260,11 @@ check_and_exit: (priv->flags & ASYNC_SPD_MASK)) || (((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) && (old_priv.custom_divisor != priv->custom_divisor))) { -unlock_kernel (); +mutex_unlock (&priv->cfg_lock);change_speed (tty, port); } else -unlock_kernel (); + mutex_unlock(&priv->cfg_lock);return 0 ; }/* set_serial_info */
@@ -1532,6 +1533,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)kref_init (&priv->kref);spin_lock_init (&priv->tx_lock); +mutex_init (&priv->cfg_lock);init_waitqueue_head (&priv->delta_msr_wait);/* This will push the characters through immediately rather than queue a task to deliver them */
Signature · 1 line
1.6.3.3