usbtouchscreen: add NEXIO (or iNexio) support
Subsystems (2)
PATCH 4/7 usbtouchscreen: add NEXIO (or iNexio) support
From: Ondrej Zary <[email protected]>
Add support for NEXIO (or iNexio) USB touchscreens to usbtouchscreen driver. Tested with NEX170MRT 17" LCD monitor with integrated touchscreen (with xserver-xorg-input-evtouch 0.8.8-1):
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 54 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=1870 ProdID=0001 Rev= 1.00
S: Manufacturer=iNexio
S: Product=iNexio USB
C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=00 Driver=(none)
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
No datasheet is available, this was written by capturing some data with SniffUSB in Windows: http://www.rainbow-software.org/linux_files/nexio/
---
drivers/input/touchscreen/Kconfig | 5 drivers/input/touchscreen/usbtouchscreen.c | 229 +++++++++++++++++++ 2 files changed, 234 insertions(+)
drivers/input/touchscreen/Kconfig renamed from drivers/input/touchscreen/Kconfig~usbtouchscreen-add-nexio-or-inexio-support +5 -0
@@ -549,6 +549,11 @@ config TOUCHSCREEN_USB_ETT_TC5UH bool "ET&T TC5UH touchscreen controler support" if EMBEDDED depends on TOUCHSCREEN_USB_COMPOSITE +config TOUCHSCREEN_USB_NEXIO + default y + bool "NEXIO/iNexio device support" if EMBEDDED + depends on TOUCHSCREEN_USB_COMPOSITE + config TOUCHSCREEN_TOUCHIT213 tristate "Sahara TouchIT-213 touchscreen" select SERIO
drivers/input/touchscreen/usbtouchscreen.c renamed from drivers/input/touchscreen/usbtouchscreen.c~usbtouchscreen-add-nexio-or-inexio-support +229 -0
277 lines not on this page · raw message
_
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html