Pull request - net
Wolfgang
The following changes since commit 9b208ece0a4e040774e24990b7cb6f0ad0ca4cc7:
Wolfgang Denk (1):
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
are available in the git repository at:
git://git.denx.de/u-boot-net.git master
Heiko Schocher (1):
83xx, uec: split enet_interface in two variables
Jens Scharsig (1):
new at91_emac network driver (NET_MULTI api)
Matthias Kaehlcke (2):
cs8900_initialize() cleanup
Add EP93xx ethernet driver
Mike Frysinger (1):
smc91111_eeprom: fix linking error
Nick Thompson (1):
TI: DaVinci: Updating EMAC driver for DM365, DM646x and DA8XX
Peter Tyser (6):
tsec: Force TBI PHY to 1000Mbps full duplex in SGMII mode
tsec: Clean up Broadcom PHY status parsing
tsec: Make functions/data static when possible
tsec: General cleanup
tsec: Add support for using the BCM5482 PHY in fiber mode
tsec: Add TSEC_FIBER flag
Semih Hazar (1):
macb: Fix mii_phy_read and mii_phy_write functions
Seunghyeon Rhee (1):
NET: Fix MAC addr handling for smc911x
README | 10 + board/atmel/at91rm9200dk/at91rm9200dk.c | 15 + board/atmel/at91rm9200ek/at91rm9200ek.c | 14 + board/cmc_pu2/cmc_pu2.c | 13 + board/csb637/csb637.c | 13 + board/eukrea/cpuat91/cpuat91.c | 14 + board/freescale/mpc8360emds/mpc8360emds.c | 3 +- board/kb9202/kb9202.c | 13 + board/m501sk/m501sk.c | 14 + board/mp2usb/mp2usb.c | 13 + cpu/arm920t/at91rm9200/bcm5221.c | 4 +- cpu/arm920t/at91rm9200/dm9161.c | 3 +- drivers/net/Makefile | 2 + drivers/net/at91_emac.c | 498 +++++++++++++++ drivers/net/cs8900.c | 3 +- drivers/net/davinci_emac.c | 266 ++++++--- drivers/net/ep93xx_eth.c | 653 ++++++++++++++++++++ drivers/net/ep93xx_eth.h | 144 +++++ drivers/net/macb.c | 110 +--- drivers/net/smc911x.c | 15 +- drivers/net/tsec.c | 941 ++++++++++++++++------------- drivers/qe/uec.c | 122 +++-- drivers/qe/uec.h | 34 +- drivers/qe/uec_phy.c | 84 ++-- examples/standalone/smc91111_eeprom.c | 5 +- include/asm-arm/arch-at91/at91_emac.h | 145 +++++ include/asm-arm/arch-davinci/emac_defs.h | 59 ++- include/common.h | 5 + include/configs/MPC8323ERDB.h | 6 +- include/configs/MPC832XEMDS.h | 6 +- include/configs/MPC8360EMDS.h | 6 +- include/configs/MPC8360ERDK.h | 6 +- include/configs/MPC8568MDS.h | 6 +- include/configs/MPC8569MDS.h | 30 +- include/configs/at91rm9200dk.h | 9 +- include/configs/at91rm9200ek.h | 8 +- include/configs/cmc_pu2.h | 8 +- include/configs/cpuat91.h | 8 +- include/configs/csb637.h | 8 +- include/configs/kb9202.h | 8 +- include/configs/kmeter1.h | 3 +- include/configs/m501sk.h | 9 +- include/configs/mp2usb.h | 8 +- include/netdev.h | 2 + include/tsec.h | 20 +- 45 files changed, 2602 insertions(+), 764 deletions(-) create mode 100644 drivers/net/at91_emac.c create mode 100644 drivers/net/ep93xx_eth.c create mode 100644 drivers/net/ep93xx_eth.h create mode 100644 include/asm-arm/arch-at91/at91_emac.h
regards,
Ben
Quoted 45 lines
-----Original Message-----
From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Ben Warren
Sent: Monday, February 01, 2010 12:17 PM
To: Wolfgang Denk
Cc: U-Boot
Subject: [U-Boot] Pull request - netWolfgang
The following changes since commit
9b208ece0a4e040774e24990b7cb6f0ad0ca4cc7:
Wolfgang Denk (1):
Merge branch 'master' ofgit://git.denx.de/u-boot-mpc85xxare available in the git repository at:
git://git.denx.de/u-boot-net.gitmasterHeiko Schocher (1):
83xx, uec: splitenet_interfacein two variablesJens Scharsig (1):
newat91_emacnetwork driver (NET_MULTIapi)Matthias Kaehlcke (2):
cs8900_initialize()cleanup
Add EP93xx ethernet driverMike Frysinger (1):
smc91111_eeprom: fix linking errorNick Thompson (1):
TI: DaVinci: Updating EMAC driver for DM365, DM646x and DA8XXPeter Tyser (6):
tsec: Force TBI PHY to 1000Mbps full duplex in SGMII mode
tsec: Clean up Broadcom PHY status parsing
tsec: Make functions/data static when possible
tsec: General cleanup
tsec: Add support for using the BCM5482 PHY in fiber mode
tsec: AddTSEC_FIBERflag
Quoted 5 lines
Semih Hazar (1):
macb: Fixmii_phy_readandmii_phy_writefunctionsSeunghyeon Rhee (1):
NET: Fix MAC addr handling for smc911x
Hi Ben
This pull request misses the patch http://lists.denx.de/pipermail/u-boot/2010-January/066688.html
Have you missed it by mistake?
Regards..
Prafulla . .
Hi Prafulla,
Quoted 57 lines · Prafulla Wadaskar
Quoted 45 lines
-----Original Message-----
From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Ben Warren
Sent: Monday, February 01, 2010 12:17 PM
To: Wolfgang Denk
Cc: U-Boot
Subject: [U-Boot] Pull request - netWolfgang
The following changes since commit
9b208ece0a4e040774e24990b7cb6f0ad0ca4cc7:
Wolfgang Denk (1):
Merge branch 'master' ofgit://git.denx.de/u-boot-mpc85xxare available in the git repository at:
git://git.denx.de/u-boot-net.gitmasterHeiko Schocher (1):
83xx, uec: splitenet_interfacein two variablesJens Scharsig (1):
newat91_emacnetwork driver (NET_MULTIapi)Matthias Kaehlcke (2):
cs8900_initialize()cleanup
Add EP93xx ethernet driverMike Frysinger (1):
smc91111_eeprom: fix linking errorNick Thompson (1):
TI: DaVinci: Updating EMAC driver for DM365, DM646x and DA8XXPeter Tyser (6):
tsec: Force TBI PHY to 1000Mbps full duplex in SGMII mode
tsec: Clean up Broadcom PHY status parsing
tsec: Make functions/data static when possible
tsec: General cleanup
tsec: Add support for using the BCM5482 PHY in fiber mode
tsec: AddTSEC_FIBERflagQuoted 5 lines
Semih Hazar (1):
macb: Fixmii_phy_readandmii_phy_writefunctionsSeunghyeon Rhee (1):
NET: Fix MAC addr handling for smc911xHi Ben
This pull request misses the patch
http://lists.denx.de/pipermail/u-boot/2010-January/066688.html
Have you missed it by mistake?
Quoted 6 lines
Yep, missed that one. Sorry. I'll look at it tomorrow.
Regards..
Prafulla . .
regards,
Ben
Wolfgang Denk
AppliedDear Ben Warren,
Quoted 82 lines · In message <[email protected]> you wrote:
Wolfgang
The following changes since commit
9b208ece0a4e040774e24990b7cb6f0ad0ca4cc7:
Wolfgang Denk (1):
Merge branch 'master' ofgit://git.denx.de/u-boot-mpc85xxare available in the git repository at:
git://git.denx.de/u-boot-net.gitmasterHeiko Schocher (1):
83xx, uec: splitenet_interfacein two variablesJens Scharsig (1):
newat91_emacnetwork driver (NET_MULTIapi)Matthias Kaehlcke (2):
cs8900_initialize()cleanup
Add EP93xx ethernet driverMike Frysinger (1):
smc91111_eeprom: fix linking errorNick Thompson (1):
TI: DaVinci: Updating EMAC driver for DM365, DM646x and DA8XXPeter Tyser (6):
tsec: Force TBI PHY to 1000Mbps full duplex in SGMII mode
tsec: Clean up Broadcom PHY status parsing
tsec: Make functions/data static when possible
tsec: General cleanup
tsec: Add support for using the BCM5482 PHY in fiber mode
tsec: AddTSEC_FIBERflagSemih Hazar (1):
macb: Fixmii_phy_readandmii_phy_writefunctionsSeunghyeon Rhee (1):
NET: Fix MAC addr handling for smc911xREADME | 10 + board/atmel/at91rm9200dk/at91rm9200dk.c | 15 + board/atmel/at91rm9200ek/at91rm9200ek.c | 14 + board/cmc_pu2/cmc_pu2.c | 13 + board/csb637/csb637.c | 13 + board/eukrea/cpuat91/cpuat91.c | 14 + board/freescale/mpc8360emds/mpc8360emds.c | 3 +- board/kb9202/kb9202.c | 13 + board/m501sk/m501sk.c | 14 + board/mp2usb/mp2usb.c | 13 + cpu/arm920t/at91rm9200/bcm5221.c | 4 +- cpu/arm920t/at91rm9200/dm9161.c | 3 +- drivers/net/Makefile | 2 + drivers/net/at91_emac.c | 498 +++++++++++++++ drivers/net/cs8900.c | 3 +- drivers/net/davinci_emac.c | 266 ++++++--- drivers/net/ep93xx_eth.c | 653 ++++++++++++++++++++ drivers/net/ep93xx_eth.h | 144 +++++ drivers/net/macb.c | 110 +--- drivers/net/smc911x.c | 15 +- drivers/net/tsec.c | 941 ++++++++++++++++------------- drivers/qe/uec.c | 122 +++-- drivers/qe/uec.h | 34 +- drivers/qe/uec_phy.c | 84 ++-- examples/standalone/smc91111_eeprom.c | 5 +- include/asm-arm/arch-at91/at91_emac.h | 145 +++++ include/asm-arm/arch-davinci/emac_defs.h | 59 ++- include/common.h | 5 + include/configs/MPC8323ERDB.h | 6 +- include/configs/MPC832XEMDS.h | 6 +- include/configs/MPC8360EMDS.h | 6 +- include/configs/MPC8360ERDK.h | 6 +- include/configs/MPC8568MDS.h | 6 +- include/configs/MPC8569MDS.h | 30 +- include/configs/at91rm9200dk.h | 9 +- include/configs/at91rm9200ek.h | 8 +- include/configs/cmc_pu2.h | 8 +- include/configs/cpuat91.h | 8 +- include/configs/csb637.h | 8 +- include/configs/kb9202.h | 8 +- include/configs/kmeter1.h | 3 +- include/configs/m501sk.h | 9 +-
Quoted 8 lines
include/configs/mp2usb.h | 8 +- include/netdev.h | 2 + include/tsec.h | 20 +- 45 files changed, 2602 insertions(+), 764 deletions(-) create mode 100644 drivers/net/at91_emac.c create mode 100644 drivers/net/ep93xx_eth.c create mode 100644 drivers/net/ep93xx_eth.h create mode 100644 include/asm-arm/arch-at91/at91_emac.h
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Is a computer language with goto's totally Wirth-less?