Initial support for Technexion Thunderboard : boardsupport
Subsystems (3)
PATCH 1/3 Initial support for Technexion Thunderboard : boardsupport
Dear All,
Patches reformatted for mainline.
Daniel Toussaint
Signed-off-by Daniel Toussaint <[email protected]>
arch/arm/mach-omap2/board-omap3thunder.c +455 -0
@@ -0,0 +1,455 @@ +/* +* Copyright (C) 2009 Technexion +* Modified from mach-omap2/board-omap3beagleboard.c +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/nand.h> + +#include <linux/regulator/machine.h> +#include <linux/i2c/twl4030.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> + +#include <mach/board.h> +#include <mach/usb.h> +#include <linux/usb/otg.h> +#include <mach/common.h> +#include <mach/gpmc.h> +#include <mach/nand.h> + +#include "mmc-twl4030.h" + +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> +#include <mach/mcspi.h> +#include <mach/mmc.h> + +#define OMAP3_THUNDER_TS_GPIO 136 +#define GPMC_CS0_BASE 0x60 +#define GPMC_CS_SIZE 0x30 +#define NAND_BLOCK_SIZE SZ_128K + +#define THUNDER_DVI_PANEL_EN_GPIO 199 +#define THUNDER_LCD_PANEL_ENVDD 138 +#define THUNDER_LCD_PON 139 + +static struct mtd_partition omap3thunder_nand_partitions[] = { +/* All the partition sizes are listed in terms of NAND block size */ + { + .name ="X-Loader" , + .offset =0 , + .size =4 *NAND_BLOCK_SIZE , + .mask_flags =MTD_WRITEABLE ,/* force read-only */ + }, + { + .name ="U-Boot" , + .offset =MTDPART_OFS_APPEND ,/* Offset = 0x80000 */ + .size =15 *NAND_BLOCK_SIZE , + .mask_flags =MTD_WRITEABLE ,/* force read-only */ + }, + { + .name ="U-Boot Env" , + .offset =MTDPART_OFS_APPEND ,/* Offset = 0x260000 */ + .size =1 *NAND_BLOCK_SIZE , + }, + { + .name ="Kernel" , + .offset =MTDPART_OFS_APPEND ,/* Offset = 0x280000 */ + .size =32 *NAND_BLOCK_SIZE , + }, + { + .name ="File System" , + .offset =MTDPART_OFS_APPEND ,/* Offset = 0x680000 */ + .size =MTDPART_SIZ_FULL , + }, +}; + +static struct omap_nand_platform_data omap3thunder_nand_data = { + .options =NAND_BUSWIDTH_16 , + .parts = omap3thunder_nand_partitions, + .nr_parts =ARRAY_SIZE (omap3thunder_nand_partitions), + .dma_channel =-1 ,/* disable DMA in OMAP NAND driver */ + .nand_setup =NULL , + .dev_ready =NULL , +}; + +static struct resource omap3thunder_nand_resource = { + .flags =IORESOURCE_MEM , +}; + +static struct platform_device omap3thunder_nand_device = { + .name ="omap2-nand" , + .id =-1 , + .dev = { + .platform_data = &omap3thunder_nand_data, + }, + .num_resources =1 , + .resource = &omap3thunder_nand_resource, +}; + +#include "sdram-micron-mt46h32m32lf-6.h" + +static struct omap_uart_config omap3_thunder_uart_config__initdata = { + .enabled_uarts = ((1 <<0 ) | (1 <<1 ) | (1 <<2 )), +}; + +static struct twl4030_usb_data thunder_usb_data = { + .usb_mode =T2_USB_MODE_ULPI , +}; + +static struct twl4030_hsmmc_info mmc[] = { + { + .mmc =1 , + .wires =8 , + .gpio_cd = -EINVAL , + .gpio_wp =29 , + }, + { + .mmc =2 , + .wires =4 , + .gpio_cd = -EINVAL , + .gpio_wp = -EINVAL , + }, + {}/* Terminator */ +}; + +static struct regulator_consumer_supply thunder_vmmc1_supply = { + .supply ="vmmc" , +}; + +static struct regulator_consumer_supply thunder_vmmc2_supply = { + .supply ="vmmc" , +}; + +static struct regulator_consumer_supply thunder_vsim_supply = { + .supply ="vmmc_aux" , +}; + +static struct gpio_led gpio_leds[] = { + { + .name ="thunderboard::usr0" , + .default_trigger ="heartbeat" , + .gpio = -EINVAL ,/* gets replaced */ + .active_low = true, + }, +}; + +static int thunder_twl_gpio_setup (struct device *dev, +unsigned gpio,unsigned ngpio) +{ + mmc[0 ].gpio_cd = gpio +0 ; +twl4030_mmc_init (mmc); + +/* link regulators to MMC adapters */ + thunder_vmmc1_supply.dev = mmc[0 ].dev; + thunder_vmmc2_supply.dev = mmc[1 ].dev; + thunder_vsim_supply.dev = mmc[0 ].dev; + +/* the LED marked LED 2 (LEDA) */ + gpio_leds[0 ].gpio = gpio +TWL4030_GPIO_MAX +1 ; + +/* gpio + 7 == DVI Enable */ +gpio_request (gpio +7 ,"EN_DVI" ); +gpio_direction_output (gpio +7 ,0 ); +return 0 ; +} + +static struct twl4030_gpio_platform_data thunder_gpio_data = { + .gpio_base =OMAP_MAX_GPIO_LINES , + .irq_base =TWL4030_GPIO_IRQ_BASE , + .irq_end =TWL4030_GPIO_IRQ_END , + .use_leds = false, + .pullups =BIT (1 ), + .pulldowns =BIT (2 ) |BIT (6 ) |BIT (7 ) |BIT (8 ) |BIT (13 ) + |BIT (15 ) |BIT (16 ) |BIT (17 ), + .setup = thunder_twl_gpio_setup, +}; + + +/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ +static struct regulator_init_data thunder_vmmc1 = { + .constraints = { + .min_uV =1850000 , + .max_uV =3150000 , + .valid_modes_mask =REGULATOR_MODE_NORMAL + |REGULATOR_MODE_STANDBY , + .valid_ops_mask =REGULATOR_CHANGE_VOLTAGE + |REGULATOR_CHANGE_MODE + |REGULATOR_CHANGE_STATUS , + }, + .num_consumer_supplies =1 , + .consumer_supplies = &thunder_vmmc1_supply, +}; + + +static struct regulator_init_data thunder_vmmc2 = { + .constraints = { + .min_uV =1850000 , + .max_uV =3150000 , + .apply_uV = true, + .valid_modes_mask =REGULATOR_MODE_NORMAL + |REGULATOR_MODE_STANDBY , + .valid_ops_mask =REGULATOR_CHANGE_MODE + |REGULATOR_CHANGE_STATUS , + }, + .num_consumer_supplies =1 , + .consumer_supplies = &thunder_vmmc2_supply, +}; + +/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ +static struct regulator_init_data thunder_vsim = { + .constraints = { + .min_uV =1800000 , + .max_uV =3000000 , + .valid_modes_mask =REGULATOR_MODE_NORMAL + |REGULATOR_MODE_STANDBY , + .valid_ops_mask =REGULATOR_CHANGE_VOLTAGE + |REGULATOR_CHANGE_MODE + |REGULATOR_CHANGE_STATUS , + }, + .num_consumer_supplies =1 , + .consumer_supplies = &thunder_vsim_supply, +}; + +static struct twl4030_platform_data thunder_twldata = { + .irq_base =TWL4030_IRQ_BASE , + .irq_end =TWL4030_IRQ_END , + +/* platform_data for children goes here */ + .usb = &thunder_usb_data, + .gpio = &thunder_gpio_data, + .vmmc1 = &thunder_vmmc1, + .vmmc2 = &thunder_vmmc2, + .vsim = &thunder_vsim, +}; + +static struct i2c_board_info __initdata thunder_i2c_boardinfo[] = { + { +I2C_BOARD_INFO ("twl4030" ,0x48 ), + .flags =I2C_CLIENT_WAKE , + .irq =INT_34XX_SYS_NIRQ , + .platform_data = &thunder_twldata, + }, +}; + +static int __init omap3_thunder_i2c_init (void ) +{ +omap_register_i2c_bus (1 ,2600 , thunder_i2c_boardinfo, +ARRAY_SIZE (thunder_i2c_boardinfo)); +omap_register_i2c_bus (2 ,100 ,NULL ,0 ); +omap_register_i2c_bus (3 ,100 ,NULL ,0 ); +return 0 ; +} + +static void __init omap3_thunder_init_irq (void ) +{ +omap2_init_common_hw (mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); +omap_init_irq (); +omap_gpio_init (); +} + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds =ARRAY_SIZE (gpio_leds), +}; + +static struct platform_device leds_gpio = { + .name ="leds-gpio" , + .id =-1 , + .dev = { + .platform_data = &gpio_led_info, + }, +}; + +static struct gpio_keys_button gpio_buttons[] = { + { + .code =BTN_EXTRA , + .gpio =7 , + .desc ="user" , + .wakeup =1 , + }, +}; + +static struct gpio_keys_platform_data gpio_key_info = { + .buttons = gpio_buttons, + .nbuttons =ARRAY_SIZE (gpio_buttons), +}; + +static struct platform_device keys_gpio = { + .name ="gpio-keys" , + .id =-1 , + .dev = { + .platform_data = &gpio_key_info, + }, +}; + +static void ads7846_dev_init (void ) +{ +if (gpio_request (OMAP3_THUNDER_TS_GPIO ,"ADS7846 pendown" ) <0 ) +printk (KERN_ERR "can't get ads7846 pen down GPIO\n" ); + +gpio_direction_input (OMAP3_THUNDER_TS_GPIO ); + +omap_set_gpio_debounce (OMAP3_THUNDER_TS_GPIO ,1 ); +omap_set_gpio_debounce_time (OMAP3_THUNDER_TS_GPIO ,0xa ); +} + +static int ads7846_get_pendown_state (void ) +{ +return !gpio_get_value (OMAP3_THUNDER_TS_GPIO ); +} + +struct ads7846_platform_data ads7846_config = { + .x_max =0x0fff , + .y_max =0x0fff , + .x_plate_ohms =180 , + .pressure_max =255 , + .debounce_max =10 , + .debounce_tol =3 , + .debounce_rep =1 , + .get_pendown_state = ads7846_get_pendown_state, + .keep_vref_on =1 , + .settle_delay_usecs =150 , +}; + + +static struct omap2_mcspi_device_config ads7846_mcspi_config = { + .turbo_mode =0 , + .single_channel =1 ,/* 0: slave, 1: master */ +}; + + +struct spi_board_info omap3thunder_spi_board_touch[] = { + { + .modalias ="ads7846" , + .bus_num =1 , + .chip_select =0 , + .max_speed_hz =1500000 , + .controller_data = &ads7846_mcspi_config, + .irq =OMAP_GPIO_IRQ (OMAP3_THUNDER_TS_GPIO ), + .platform_data = &ads7846_config, + }, +}; + + +/* G-sensor on SPI bus 4 */ +static struct spi_board_info omap3thunder_spi_board_info[] = { + { + .modalias ="spidev" , + .max_speed_hz =1500000 , + .bus_num =4 , + .chip_select =0 , + .mode =SPI_MODE_0 , + }, +}; + +static struct omap_board_config_kernel omap3_thunder_config[]__initdata = { +}; + +static struct platform_device *omap3_thunder_devices[]__initdata = { + &leds_gpio, + &keys_gpio, +}; + +static void __init omap3thunder_flash_init (void ) +{ +u8 cs =0 ; +u8 nandcs =GPMC_CS_NUM +1 ; + +u32 gpmc_base_add =OMAP34XX_GPMC_VIRT ; + +/* find out the chip-select on which NAND exists */ +while (cs <GPMC_CS_NUM ) { +u32 ret =0 ; + ret =gpmc_cs_read_reg (cs,GPMC_CS_CONFIG1 ); + +if ((ret &0xC00 ) ==0x800 ) { +printk (KERN_INFO "Found NAND on CS%d\n" , cs); +if (nandcs >GPMC_CS_NUM ) + nandcs = cs; + } + cs++; + } + +if (nandcs >GPMC_CS_NUM ) { +printk (KERN_INFO "NAND: Unable to find configuration " +"in GPMC\n " ); +return ; + } + +if (nandcs <GPMC_CS_NUM ) { + omap3thunder_nand_data.cs = nandcs; + omap3thunder_nand_data.gpmc_cs_baseaddr = (void *) + (gpmc_base_add +GPMC_CS0_BASE + nandcs *GPMC_CS_SIZE ); + omap3thunder_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add); + +printk (KERN_INFO "Registering NAND on CS%d\n" , nandcs); +if (platform_device_register (&omap3thunder_nand_device) <0 ) +printk (KERN_ERR "Unable to register NAND device\n" ); + } +} + +static void __init omap3_thunder_init (void ) +{ +omap3_thunder_i2c_init (); + +/* Turn on Wireless LAN */ +gpio_request (157 ,"WIFI ENABLE" ); +gpio_direction_output (157 ,0 ); + +platform_add_devices (omap3_thunder_devices, +ARRAY_SIZE (omap3_thunder_devices)); + omap_board_config = omap3_thunder_config; + omap_board_config_size =ARRAY_SIZE (omap3_thunder_config); +omap_serial_init (); + +usb_musb_init (); +omap3thunder_flash_init (); + +ads7846_dev_init (); +spi_register_board_info (omap3thunder_spi_board_touch, +ARRAY_SIZE (omap3thunder_spi_board_touch)); +spi_register_board_info (omap3thunder_spi_board_info, +ARRAY_SIZE (omap3thunder_spi_board_info)); + +} + +static void __init omap3_thunder_map_io (void ) +{ +omap2_set_globals_343x (); +omap2_map_common_io (); +} + +MACHINE_START (OMAP3_THUNDER ,"OMAP3 Thunder Board" ) +/* Maintainer: Daniel Toussaint [email protected] */ + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3_thunder_map_io, + .init_irq = omap3_thunder_init_irq, + .init_machine = omap3_thunder_init, + .timer = &omap_timer, +MACHINE_END
arch/arm/mach-omap2/Kconfig +4 -0
@@ -100,3 +100,7 @@ config MACH_OMAP_4430SDP bool "OMAP 4430 SDP board" depends on ARCH_OMAP4 + +config MACH_OMAP3_THUNDER + bool "Thunder OMAP3530 board" + depends on ARCH_OMAP3 && ARCH_OMAP34XX
arch/arm/mach-omap2/Makefile +3 -0
@@ -77,6 +77,9 @@ obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o +obj-$(CONFIG_MACH_OMAP3_THUNDER) += board-omap3thunder.o \ + mmc-twl4030.o + # Platform specific device init code obj-y += usb-musb.o obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
Tony Lindgren
maintainerHi,
Quoted 3 lines · Daniel Toussaint
Dear All,
Patches reformatted for mainline.
Look OK, can you please repost the series with proper patch description and Signed-off-by? See Documentation/submit* files for more info.
Need it pretty fast too for this merge window please :)
Tony
Quoted 488 lines
Daniel Toussaint
Signed-off-by Daniel Toussaint <[email protected]>diff -Nur
linux-2.6.32-pristine/arch/arm/mach-omap2/board-omap3thunder.clinux-2.6.32-patched/arch/arm/mach-omap2/board-omap3thunder.carch/arm/mach-omap2/board-omap3thunder.c +455
-0@@ -0,0 +1,455 @@ +/* +* Copyright (C) 2009 Technexion +* Modified from mach-omap2/board-omap3beagleboard.c +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/nand.h> + +#include <linux/regulator/machine.h> +#include <linux/i2c/twl4030.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> + +#include <mach/board.h> +#include <mach/usb.h> +#include <linux/usb/otg.h> +#include <mach/common.h> +#include <mach/gpmc.h> +#include <mach/nand.h> + +#include "mmc-twl4030.h" + +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> +#include <mach/mcspi.h> +#include <mach/mmc.h> + +#define OMAP3_THUNDER_TS_GPIO 136 +#define GPMC_CS0_BASE 0x60 +#define GPMC_CS_SIZE 0x30 +#define NAND_BLOCK_SIZE SZ_128K + +#define THUNDER_DVI_PANEL_EN_GPIO 199 +#define THUNDER_LCD_PANEL_ENVDD 138 +#define THUNDER_LCD_PON 139 + +static struct mtd_partition omap3thunder_nand_partitions[] = { +/* All the partition sizes are listed in terms of NAND block size */ + { + .name ="X-Loader" , + .offset =0 , + .size =4 *NAND_BLOCK_SIZE , + .mask_flags =MTD_WRITEABLE ,/* force read-only */ + }, + { + .name ="U-Boot" , + .offset =MTDPART_OFS_APPEND ,/* Offset = 0x80000 */ + .size =15 *NAND_BLOCK_SIZE , + .mask_flags =MTD_WRITEABLE ,/* force read-only */ + }, + { + .name ="U-Boot Env" , + .offset =MTDPART_OFS_APPEND ,/* Offset = 0x260000 */ + .size =1 *NAND_BLOCK_SIZE , + }, + { + .name ="Kernel" , + .offset =MTDPART_OFS_APPEND ,/* Offset = 0x280000 */ + .size =32 *NAND_BLOCK_SIZE , + }, + { + .name ="File System" , + .offset =MTDPART_OFS_APPEND ,/* Offset = 0x680000 */ + .size =MTDPART_SIZ_FULL , + }, +}; + +static struct omap_nand_platform_data omap3thunder_nand_data = { + .options =NAND_BUSWIDTH_16 , + .parts = omap3thunder_nand_partitions, + .nr_parts =ARRAY_SIZE (omap3thunder_nand_partitions), + .dma_channel =-1 ,/* disable DMA in OMAP NAND driver */ + .nand_setup =NULL , + .dev_ready =NULL , +}; + +static struct resource omap3thunder_nand_resource = { + .flags =IORESOURCE_MEM , +}; + +static struct platform_device omap3thunder_nand_device = { + .name ="omap2-nand" , + .id =-1 , + .dev = { + .platform_data = &omap3thunder_nand_data, + }, + .num_resources =1 , + .resource = &omap3thunder_nand_resource, +}; + +#include "sdram-micron-mt46h32m32lf-6.h" + +static struct omap_uart_config omap3_thunder_uart_config__initdata = { + .enabled_uarts = ((1 <<0 ) | (1 <<1 ) | (1 <<2 )), +}; + +static struct twl4030_usb_data thunder_usb_data = { + .usb_mode =T2_USB_MODE_ULPI , +}; + +static struct twl4030_hsmmc_info mmc[] = { + { + .mmc =1 , + .wires =8 , + .gpio_cd = -EINVAL , + .gpio_wp =29 , + }, + { + .mmc =2 , + .wires =4 , + .gpio_cd = -EINVAL , + .gpio_wp = -EINVAL , + }, + {}/* Terminator */ +}; + +static struct regulator_consumer_supply thunder_vmmc1_supply = { + .supply ="vmmc" , +}; + +static struct regulator_consumer_supply thunder_vmmc2_supply = { + .supply ="vmmc" , +}; + +static struct regulator_consumer_supply thunder_vsim_supply = { + .supply ="vmmc_aux" , +}; + +static struct gpio_led gpio_leds[] = { + { + .name ="thunderboard::usr0" , + .default_trigger ="heartbeat" , + .gpio = -EINVAL ,/* gets replaced */ + .active_low = true, + }, +}; + +static int thunder_twl_gpio_setup (struct device *dev, +unsigned gpio,unsigned ngpio) +{ + mmc[0 ].gpio_cd = gpio +0 ; +twl4030_mmc_init (mmc); + +/* link regulators to MMC adapters */ + thunder_vmmc1_supply.dev = mmc[0 ].dev; + thunder_vmmc2_supply.dev = mmc[1 ].dev; + thunder_vsim_supply.dev = mmc[0 ].dev; + +/* the LED marked LED 2 (LEDA) */ + gpio_leds[0 ].gpio = gpio +TWL4030_GPIO_MAX +1 ; + +/* gpio + 7 == DVI Enable */ +gpio_request (gpio +7 ,"EN_DVI" ); +gpio_direction_output (gpio +7 ,0 ); +return 0 ; +} + +static struct twl4030_gpio_platform_data thunder_gpio_data = { + .gpio_base =OMAP_MAX_GPIO_LINES , + .irq_base =TWL4030_GPIO_IRQ_BASE , + .irq_end =TWL4030_GPIO_IRQ_END , + .use_leds = false, + .pullups =BIT (1 ), + .pulldowns =BIT (2 ) |BIT (6 ) |BIT (7 ) |BIT (8 ) |BIT (13 ) + |BIT (15 ) |BIT (16 ) |BIT (17 ), + .setup = thunder_twl_gpio_setup, +}; + + +/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ +static struct regulator_init_data thunder_vmmc1 = { + .constraints = { + .min_uV =1850000 , + .max_uV =3150000 , + .valid_modes_mask =REGULATOR_MODE_NORMAL + |REGULATOR_MODE_STANDBY , + .valid_ops_mask =REGULATOR_CHANGE_VOLTAGE + |REGULATOR_CHANGE_MODE + |REGULATOR_CHANGE_STATUS , + }, + .num_consumer_supplies =1 , + .consumer_supplies = &thunder_vmmc1_supply, +}; + + +static struct regulator_init_data thunder_vmmc2 = { + .constraints = { + .min_uV =1850000 , + .max_uV =3150000 , + .apply_uV = true, + .valid_modes_mask =REGULATOR_MODE_NORMAL + |REGULATOR_MODE_STANDBY , + .valid_ops_mask =REGULATOR_CHANGE_MODE + |REGULATOR_CHANGE_STATUS , + }, + .num_consumer_supplies =1 , + .consumer_supplies = &thunder_vmmc2_supply, +}; + +/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ +static struct regulator_init_data thunder_vsim = { + .constraints = { + .min_uV =1800000 , + .max_uV =3000000 , + .valid_modes_mask =REGULATOR_MODE_NORMAL + |REGULATOR_MODE_STANDBY , + .valid_ops_mask =REGULATOR_CHANGE_VOLTAGE + |REGULATOR_CHANGE_MODE + |REGULATOR_CHANGE_STATUS , + }, + .num_consumer_supplies =1 , + .consumer_supplies = &thunder_vsim_supply, +}; + +static struct twl4030_platform_data thunder_twldata = { + .irq_base =TWL4030_IRQ_BASE , + .irq_end =TWL4030_IRQ_END , + +/* platform_data for children goes here */ + .usb = &thunder_usb_data, + .gpio = &thunder_gpio_data, + .vmmc1 = &thunder_vmmc1, + .vmmc2 = &thunder_vmmc2, + .vsim = &thunder_vsim, +}; + +static struct i2c_board_info __initdata thunder_i2c_boardinfo[] = { + { +I2C_BOARD_INFO ("twl4030" ,0x48 ), + .flags =I2C_CLIENT_WAKE , + .irq =INT_34XX_SYS_NIRQ , + .platform_data = &thunder_twldata, + }, +}; + +static int __init omap3_thunder_i2c_init (void ) +{ +omap_register_i2c_bus (1 ,2600 , thunder_i2c_boardinfo, +ARRAY_SIZE (thunder_i2c_boardinfo)); +omap_register_i2c_bus (2 ,100 ,NULL ,0 ); +omap_register_i2c_bus (3 ,100 ,NULL ,0 ); +return 0 ; +} + +static void __init omap3_thunder_init_irq (void ) +{ +omap2_init_common_hw (mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); +omap_init_irq (); +omap_gpio_init (); +} + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds =ARRAY_SIZE (gpio_leds), +}; + +static struct platform_device leds_gpio = { + .name ="leds-gpio" , + .id =-1 , + .dev = { + .platform_data = &gpio_led_info, + }, +}; + +static struct gpio_keys_button gpio_buttons[] = { + { + .code =BTN_EXTRA , + .gpio =7 , + .desc ="user" , + .wakeup =1 , + }, +}; + +static struct gpio_keys_platform_data gpio_key_info = { + .buttons = gpio_buttons, + .nbuttons =ARRAY_SIZE (gpio_buttons), +}; + +static struct platform_device keys_gpio = { + .name ="gpio-keys" , + .id =-1 , + .dev = { + .platform_data = &gpio_key_info, + }, +}; + +static void ads7846_dev_init (void ) +{ +if (gpio_request (OMAP3_THUNDER_TS_GPIO ,"ADS7846 pendown" ) <0 ) +printk (KERN_ERR "can't get ads7846 pen down GPIO\n" ); + +gpio_direction_input (OMAP3_THUNDER_TS_GPIO ); + +omap_set_gpio_debounce (OMAP3_THUNDER_TS_GPIO ,1 ); +omap_set_gpio_debounce_time (OMAP3_THUNDER_TS_GPIO ,0xa ); +} + +static int ads7846_get_pendown_state (void ) +{ +return !gpio_get_value (OMAP3_THUNDER_TS_GPIO ); +} + +struct ads7846_platform_data ads7846_config = { + .x_max =0x0fff , + .y_max =0x0fff , + .x_plate_ohms =180 , + .pressure_max =255 , + .debounce_max =10 , + .debounce_tol =3 , + .debounce_rep =1 , + .get_pendown_state = ads7846_get_pendown_state, + .keep_vref_on =1 , + .settle_delay_usecs =150 , +}; + + +static struct omap2_mcspi_device_config ads7846_mcspi_config = { + .turbo_mode =0 , + .single_channel =1 ,/* 0: slave, 1: master */ +}; + + +struct spi_board_info omap3thunder_spi_board_touch[] = { + { + .modalias ="ads7846" , + .bus_num =1 , + .chip_select =0 , + .max_speed_hz =1500000 , + .controller_data = &ads7846_mcspi_config, + .irq =OMAP_GPIO_IRQ (OMAP3_THUNDER_TS_GPIO ), + .platform_data = &ads7846_config, + }, +}; + + +/* G-sensor on SPI bus 4 */ +static struct spi_board_info omap3thunder_spi_board_info[] = { + { + .modalias ="spidev" , + .max_speed_hz =1500000 , + .bus_num =4 , + .chip_select =0 , + .mode =SPI_MODE_0 , + }, +}; + +static struct omap_board_config_kernel omap3_thunder_config[]__initdata = { +}; + +static struct platform_device *omap3_thunder_devices[]__initdata = { + &leds_gpio, + &keys_gpio, +}; + +static void __init omap3thunder_flash_init (void ) +{ +u8 cs =0 ; +u8 nandcs =GPMC_CS_NUM +1 ; + +u32 gpmc_base_add =OMAP34XX_GPMC_VIRT ; + +/* find out the chip-select on which NAND exists */ +while (cs <GPMC_CS_NUM ) { +u32 ret =0 ; + ret =gpmc_cs_read_reg (cs,GPMC_CS_CONFIG1 ); + +if ((ret &0xC00 ) ==0x800 ) { +printk (KERN_INFO "Found NAND on CS%d\n" , cs); +if (nandcs >GPMC_CS_NUM ) + nandcs = cs; + } + cs++; + } + +if (nandcs >GPMC_CS_NUM ) { +printk (KERN_INFO "NAND: Unable to find configuration " +"in GPMC\n " ); +return ; + } + +if (nandcs <GPMC_CS_NUM ) { + omap3thunder_nand_data.cs = nandcs; + omap3thunder_nand_data.gpmc_cs_baseaddr = (void *) + (gpmc_base_add +GPMC_CS0_BASE + nandcs *GPMC_CS_SIZE ); + omap3thunder_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add); + +printk (KERN_INFO "Registering NAND on CS%d\n" , nandcs); +if (platform_device_register (&omap3thunder_nand_device) <0 ) +printk (KERN_ERR "Unable to register NAND device\n" ); + } +} + +static void __init omap3_thunder_init (void ) +{ +omap3_thunder_i2c_init (); + +/* Turn on Wireless LAN */ +gpio_request (157 ,"WIFI ENABLE" ); +gpio_direction_output (157 ,0 ); + +platform_add_devices (omap3_thunder_devices, +ARRAY_SIZE (omap3_thunder_devices)); + omap_board_config = omap3_thunder_config; + omap_board_config_size =ARRAY_SIZE (omap3_thunder_config); +omap_serial_init (); + +usb_musb_init (); +omap3thunder_flash_init (); + +ads7846_dev_init (); +spi_register_board_info (omap3thunder_spi_board_touch, +ARRAY_SIZE (omap3thunder_spi_board_touch)); +spi_register_board_info (omap3thunder_spi_board_info, +ARRAY_SIZE (omap3thunder_spi_board_info)); + +} + +static void __init omap3_thunder_map_io (void ) +{ +omap2_set_globals_343x (); +omap2_map_common_io (); +} + +MACHINE_START (OMAP3_THUNDER ,"OMAP3 Thunder Board" ) +/* Maintainer: Daniel Toussaint [email protected] */ + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3_thunder_map_io, + .init_irq = omap3_thunder_init_irq, + .init_machine = omap3_thunder_init, + .timer = &omap_timer, +MACHINE_END diff -Nur linux-2.6.32-pristine/arch/arm/mach-omap2/Kconfig linux-2.6.32-patched/arch/arm/mach-omap2/Kconfig
arch/arm/mach-omap2/Kconfig +4
-0@@ -100,3 +100,7 @@ config MACH_OMAP_4430SDP bool "OMAP 4430 SDP board" depends on ARCH_OMAP4 + +config MACH_OMAP3_THUNDER + bool "Thunder OMAP3530 board" + depends on ARCH_OMAP3 && ARCH_OMAP34XXdiff -Nur linux-2.6.32-pristine/arch/arm/mach-omap2/Makefile linux-2.6.32-patched/arch/arm/mach-omap2/Makefile
arch/arm/mach-omap2/Makefile +3
-0@@ -77,6 +77,9 @@ obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o +obj-$(CONFIG_MACH_OMAP3_THUNDER) += board-omap3thunder.o \ + mmc-twl4030.o + # Platform specific device init code obj-y += usb-musb.o obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o