powerpc/85xx: Add NOR, LEDs and PIB support for MPC8568E-MDS boards
Subsystems (3)
PATCH 1/1 powerpc/85xx: Add NOR, LEDs and PIB support for MPC8568E-MDS boards
This patch adds NOR Flash, LEDs and PIB support for MPC8568E-MDS boards. Plus, move bcsr node into localbus node, and add bcsr5 gpio-controller node.
Some platform code modifications were also needed.
Signed-off-by Anton Vorontsov <[email protected]>
--- arch/powerpc/boot/dts/mpc8568mds.dts | 65 +++++++++++++++++++++++++++- arch/powerpc/platforms/85xx/mpc85xx_mds.c | 3 + 2 files changed, 65 insertions(+), 3 deletions(-)
arch/powerpc/boot/dts/mpc8568mds.dts +62 -3
@@ -54,9 +54,52 @@ reg = <0x0 0x10000000>; }; - bcsr@f8000000 { - compatible = "fsl,mpc8568mds-bcsr"; - reg = <0xf8000000 0x8000>; + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus", + "simple-bus"; + reg = <0xe0005000 0x1000>; + + ranges = <0x0 0x0 0xfe000000 0x02000000 + 0x1 0x0 0xf8000000 0x00008000 + 0x2 0x0 0xf0000000 0x04000000 + 0x4 0x0 0xf8008000 0x00008000 + 0x5 0x0 0xf8010000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x02000000>; + bank-width = <2>; + device-width = <2>; + }; + + bcsr@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8568mds-bcsr"; + reg = <1 0 0x8000>; + ranges = <0 1 0 0x8000>; + + bcsr5: gpio-controller@11 { + #gpio-cells = <2>; + compatible = "fsl,mpc8568mds-bcsr-gpio"; + reg = <0x5 0x1>; + gpio-controller; + }; + }; + + pib@4,0 { + compatible = "fsl,mpc8568mds-pib"; + reg = <4 0 0x8000>; + }; + + pib@5,0 { + compatible = "fsl,mpc8568mds-pib"; + reg = <5 0 0x8000>; + }; }; soc8568@e0000000 {
@@ -610,4 +653,20 @@ sleep = <&pmc 0x00080000 /* controller */ &pmc 0x00040000>; /* message unit */ }; + + leds { + compatible = "gpio-leds"; + + green { + gpios = <&bcsr5 1 0>; + }; + + amber { + gpios = <&bcsr5 2 0>; + }; + + red { + gpios = <&bcsr5 3 0>; + }; + }; };
arch/powerpc/platforms/85xx/mpc85xx_mds.c +3 -0
@@ -302,11 +302,14 @@ static struct of_device_id mpc85xx_ids[] = { { .compatible = "gianfar", }, { .compatible = "fsl,rapidio-delta", }, { .compatible = "fsl,mpc8548-guts", }, + { .compatible = "gpio-leds", }, {}, }; static int __init mpc85xx_publish_devices(void) { + if (machine_is(mpc8568_mds)) + simple_gpiochip_init("fsl,mpc8568mds-bcsr-gpio"); if (machine_is(mpc8569_mds)) simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
Signature · 1 line
1.6.5.7
Kumar Gala
AppliedQuoted 9 lines · Anton Vorontsov
This patch adds NOR Flash, LEDs and PIB support for MPC8568E-MDS boards. Plus, move bcsr node into localbus node, and add bcsr5 gpio-controller node.
=20
Some platform code modifications were also needed.
=20Signed-off-by Anton Vorontsov <[email protected]>---
arch/powerpc/boot/dts/mpc8568mds.dts| 65 =
+++++++++++++++++++++++++++-
Quoted 2 lines
arch/powerpc/platforms/85xx/mpc85xx_mds.c| 3 +2 files changed, 65 insertions(+), 3 deletions(-)
applied to next
- k=