tip related: not use bootmem for x86
Subsystems (11)
cover tip related: not use bootmem for x86
-------for 2.6.33? ---------------
7aabd8a: x86: fix sci on ioapic 1
24b26ba: x86: keep chip_data in create_irq_nr and destroy_irq
---------spareirq radix tree related ---------------- 52060b4: irq: remove not need bootmem code 24a2254: radix: move radix init early
1b88442: sparseirq: change irq_desc_ptrs to static 592e479: sparseirq: use radix_tree instead of ptrs array 7b1947e: x86: remove arch_probe_nr_irqs
---------------x86 logical flat related -----------
afded12: use nr_cpus= to set nr_cpu_ids early
c0cae89: x86: use num_processors for possible cpus
ee9c461: x86: make 32bit apic flat to physflat switch like 64bit
-----------------early_res to replace bootmem--- it will use early_res instead of bootmem with x86 code. but still can use CONFIG_NO_BOOMEM to use bootmem or not so could make transistion more smoothly
-v2: allocate vmemmap on one node together, and also seperate early_res -v3: make x86 32 bit support early_res to use bootmem too
move related early_res to kernel/
sparse vmemmap together: address Ingo.
-v4: some patches could go with tip with acked-by Jesse
radix and logical flat etc
-v5: put back to 2 patches into this patch to make it consistent
as linus pointed out that some place should replace size_t with resource_size_t, and acctually that is done already in those patches in pci/linux-next.
-v6: updated about intel_bus.c removal
-v7: address Andrew comments
update change after logical flat change from Suresh.
------------------------
http://lkml.indiana.edu/hypermail/linux/kernel/0910.3/01432.html
Ingo said:
" I think we could remove the bootmem allocator middle man altogether.
This can be done by initializing the page allocator sooner and by extending (already existing) 'reserve memory early on' mechanisms in architecture code. (the reserve_early*() APIs in x86 for example)
Right now we have 5 memory allocation models on x86, initialized gradually:
- allocator (buddy) [generic]
- early allocator (bootmem) [generic]
- very early allocator (reserve_early*()) [x86]
- very very early allocator (early brk model) [x86]
- very very very early allocator (build time .data/.bss) [generic]
Seems excessive.
The reserve_early() method is list/range based and can handle vast amounts of not very fragmented memory - perfect for basically all the real bootmem purposes (which is to bootstrap the buddy).
reserve_early() allocated memory could be freed into the buddy later on as well. The main reason why bootmem is 'destroyed' during free-to-buddy is because it has excessive internal bitmaps we want to free. With a list/range based reserve_early() mechanism there's no such problem - they can linger indefinitely and there's near zero allocation management overhead. "
d182b42: x86: move range related operation to one file 483ba54: x86/pci: use resource_size_t in update_res 390a654: x86/pci: amd one chain system to use pci read out res
d7092a9: x86/pci: use u64 instead of size_t in amd_bus.c 12d6055: x86/pci: add cap_resource
91963da: x86/pci: enable pci root res read out for 32bit too
f3399ba: x86: change range end to start+size
6a81be4: x86: print out for RAM buffer
878a861: x86: call early_res_to_bootmem one time
0c42e60: x86: introduce max_early_res and early_res_count 562294f: x86: dynamic increase early_res array size 7909d81: x86: make early_node_mem get mem > 4g if possible 3b64a9e: x86: only call dma32_reserve_bootmem 64bit !CONFIG_NUMA 28fd5da: x86: make 64 bit use early_res instead of bootmem before slab 8f08dc5: sparsemem: put usemap for one node together
fde44d7: sparsemem: put mem map for one node together. 096f978: x86: move bios page reserve early to head32/64.c
cfd3bbb: x86: seperate early_res related code from e820.c
ccc26e4: x86: add find_early_area_size
3a49dd4: x86: move back find_e820_area to e820.c
a3065c2: early_res: enhance check_and_double_early_res 8f8c07c: x86: make 32bit support NO_BOOTMEM
f8dc288: move round_up/down to kernel.h
de709d3: x86: add find_fw_memmap_area
41263b6: core: move early_res
Thanks
Yinghai
PATCH 1/35 x86: fix sci on ioapic 1
Thomas Renninger <[email protected]> reported on IBM x3330
booting a latest kernel on this machine results in:
PCI: PCI BIOS revision 2.10 entry at 0xfd61c, last bus=1
PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0
ACPI: SCI (IRQ30) allocation failed
ACPI Exception: AE_NOT_ACQUIRED, Unable to install System Control Interrupt handler (20090903/evevent-161)
ACPI: Unable to start the ACPI Interpreter
Later all kind of devices fail...
and bisect it down to this commit:
commit b9c61b70075c87a8612624736faf4a2de5b1ed30
x86/pci: update pirq_enable_irq() to setup io apic routing
it turns out we need to set irq routing for the sci on ioapic1 early.
-v2: make it work without sparseirq too.
-v3: fix checkpatch.pl warning, and cc to stable
--- arch/x86/include/asm/io_apic.h | 1 + arch/x86/kernel/acpi/boot.c | 9 ++++++- arch/x86/kernel/apic/io_apic.c | 50 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 59 insertions(+), 1 deletions(-)
arch/x86/include/asm/io_apic.h +1 -0
@@ -160,6 +160,7 @@ extern int io_apic_get_redir_entries(int ioapic);struct io_apic_irq_attr ;extern int io_apic_set_pci_routing (struct device *dev,int irq,struct io_apic_irq_attr *irq_attr); +void setup_IO_APIC_irq_extra (u32 gsi);extern int (*ioapic_renumber_irq)(int ioapic,int irq);extern void ioapic_init_mappings (void );extern void ioapic_insert_resources (void );
arch/x86/kernel/acpi/boot.c +8 -1
@@ -446,6 +446,12 @@ void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)int acpi_gsi_to_irq (u32 gsi,unsigned int *irq) { *irq = gsi; + +#ifdef CONFIG_X86_IO_APIC +if (acpi_irq_model ==ACPI_IRQ_MODEL_IOAPIC ) +setup_IO_APIC_irq_extra (gsi); +#endif +return 0 ; }
@@ -473,7 +479,8 @@ int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity) plat_gsi = mp_register_gsi(dev, gsi, trigger, polarity); }#endif -acpi_gsi_to_irq (plat_gsi, &irq); + irq = plat_gsi; +return irq; }
arch/x86/kernel/apic/io_apic.c +50 -0
56 lines not on this page · raw message
Signature · 1 line
1.6.4.2
[tip:x86/urgent] x86: Fix SCI on IOAPIC != 0
Commit-ID: 18dce6ba5c8c6bd0f3ab4efa4cbdd698dab5c40a Gitweb: http://git.kernel.org/tip/18dce6ba5c8c6bd0f3ab4efa4cbdd698dab5c40a Author: Yinghai Lu <[email protected]> AuthorDate: Wed, 10 Feb 2010 01:20:05 -0800 Committer: H. Peter Anvin <[email protected]> CommitDate: Wed, 10 Feb 2010 13:47:39 -0800
x86: Fix SCI on IOAPIC != 0
Thomas Renninger <[email protected]> reported on IBM x3330
booting a latest kernel on this machine results in:
PCI: PCI BIOS revision 2.10 entry at 0xfd61c, last bus=1
PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0
ACPI: SCI (IRQ30) allocation failed
ACPI Exception: AE_NOT_ACQUIRED, Unable to install System Control Interrupt handler (20090903/evevent-161)
ACPI: Unable to start the ACPI Interpreter
Later all kind of devices fail...
and bisect it down to this commit:
commit b9c61b70075c87a8612624736faf4a2de5b1ed30
x86/pci: update pirq_enable_irq() to setup io apic routing
it turns out we need to set irq routing for the sci on ioapic1 early.
-v2: make it work without sparseirq too.
-v3: fix checkpatch.pl warning, and cc to stable
LKML-Reference: <[email protected]>
--- arch/x86/include/asm/io_apic.h | 1 + arch/x86/kernel/acpi/boot.c | 9 ++++++- arch/x86/kernel/apic/io_apic.c | 50 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 59 insertions(+), 1 deletions(-)
arch/x86/include/asm/io_apic.h +1 -0
@@ -160,6 +160,7 @@ extern int io_apic_get_redir_entries(int ioapic);struct io_apic_irq_attr ;extern int io_apic_set_pci_routing (struct device *dev,int irq,struct io_apic_irq_attr *irq_attr); +void setup_IO_APIC_irq_extra (u32 gsi);extern int (*ioapic_renumber_irq)(int ioapic,int irq);extern void ioapic_init_mappings (void );extern void ioapic_insert_resources (void );
arch/x86/kernel/acpi/boot.c +8 -1
@@ -446,6 +446,12 @@ void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)int acpi_gsi_to_irq (u32 gsi,unsigned int *irq) { *irq = gsi; + +#ifdef CONFIG_X86_IO_APIC +if (acpi_irq_model ==ACPI_IRQ_MODEL_IOAPIC ) +setup_IO_APIC_irq_extra (gsi); +#endif +return 0 ; }
@@ -473,7 +479,8 @@ int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity) plat_gsi = mp_register_gsi(dev, gsi, trigger, polarity); }#endif -acpi_gsi_to_irq (plat_gsi, &irq); + irq = plat_gsi; +return irq; }
arch/x86/kernel/apic/io_apic.c +50 -0
56 lines not on this page · raw message
PATCH 2/35 x86: keep chip_data in create_irq_nr and destroy_irq
In reply to Yinghai LuFrom: Brandon Phiilps <[email protected]>
When two drivers are setting up MSI-X at the same time via pci_enable_msix() there is a race. See this dmesg excerpt:
[ 85.170610] ixgbe 0000:02:00.1: irq 97 for MSI/MSI-X [ 85.170611] alloc irq_desc for 99 on node -1 [ 85.170613] igb 0000:08:00.1: irq 98 for MSI/MSI-X [ 85.170614] alloc kstat_irqs on node -1 [ 85.170616] alloc irq_2_iommu on node -1 [ 85.170617] alloc irq_desc for 100 on node -1 [ 85.170619] alloc kstat_irqs on node -1 [ 85.170621] alloc irq_2_iommu on node -1 [ 85.170625] ixgbe 0000:02:00.1: irq 99 for MSI/MSI-X [ 85.170626] alloc irq_desc for 101 on node -1 [ 85.170628] igb 0000:08:00.1: irq 100 for MSI/MSI-X [ 85.170630] alloc kstat_irqs on node -1 [ 85.170631] alloc irq_2_iommu on node -1 [ 85.170635] alloc irq_desc for 102 on node -1 [ 85.170636] alloc kstat_irqs on node -1 [ 85.170639] alloc irq_2_iommu on node -1 [ 85.170646] BUG: unable to handle kernel NULL pointer dereference
at 0000000000000088
As you can see igb and ixgbe are both alternating on create_irq_nr() via pci_enable_msix() in their probe function.
ixgbe: While looping through irq_desc_ptrs[] via create_irq_nr() ixgbe choses irq_desc_ptrs[102] and exits the loop, drops vector_lock and calls dynamic_irq_init. Then it sets irq_desc_ptrs[102]->chip_data = NULL via dynamic_irq_init().
igb: Grabs the vector_lock now and starts looping over irq_desc_ptrs[] via create_irq_nr(). It gets to irq_desc_ptrs[102] and does this:
cfg_new = irq_desc_ptrs[102]->chip_data; if (cfg_new->vector != 0) continue;
This hits the NULL deref.
Another possible race exists via pci_disable_msix() in a driver or in the number of error paths that call free_msi_irqs():
destroy_irq()dynamic_irq_cleanup() which sets desc->chip_data = NULL ...race window...desc->chip_data = cfg;
Remove the save and restore code for cfg in create_irq_nr() and destroy_irq() and take the desc->lock when checking the irq_cfg.
--- arch/x86/kernel/apic/io_apic.c | 18 ++++---------- include/linux/irq.h | 2 + kernel/irq/chip.c | 52 +++++++++++++++++++++++++++++++++------- 3 files changed, 50 insertions(+), 22 deletions(-)
arch/x86/kernel/apic/io_apic.c +5 -13
@@ -3280,12 +3280,9 @@ unsigned int create_irq_nr(unsigned int irq_want, int node) }spin_unlock_irqrestore (&vector_lock, flags); -if (irq >0 ) { -dynamic_irq_init (irq); -/* restore it, in case dynamic_irq_init clear it */ -if (desc_new) - desc_new->chip_data = cfg_new; - } +if (irq >0 ) +dynamic_irq_init_keep_chip_data (irq); +return irq; }
@@ -3308,17 +3305,12 @@ void destroy_irq(unsigned int irq) {unsigned long flags;struct irq_cfg *cfg; -struct irq_desc *desc; -/* store it, in case dynamic_irq_cleanup clear it */ - desc =irq_to_desc (irq); - cfg = desc->chip_data; -dynamic_irq_cleanup (irq); -/* connect back irq_cfg */ - desc->chip_data = cfg; +dynamic_irq_cleanup_keep_chip_data (irq);free_irte (irq);spin_lock_irqsave (&vector_lock, flags); + cfg =irq_to_desc (irq)->chip_data;__clear_irq_vector (irq, cfg);spin_unlock_irqrestore (&vector_lock, flags); }
include/linux/irq.h +2 -0
@@ -400,7 +400,9 @@ static inline int irq_has_action(unsigned int irq)/* Dynamic irq helper functions */ extern void dynamic_irq_init (unsigned int irq); +void dynamic_irq_init_keep_chip_data (unsigned int irq);extern void dynamic_irq_cleanup (unsigned int irq); +void dynamic_irq_cleanup_keep_chip_data (unsigned int irq);/* Set/get chip/data for an IRQ: */ extern int set_irq_chip (unsigned int irq,struct irq_chip *chip);
kernel/irq/chip.c +43 -9
84 lines not on this page · raw message
Signature · 1 line
1.6.4.2
[tip:x86/irq] x86: Avoid race condition in pci_enable_msix()
Commit-ID: ced5b697a76d325e7a7ac7d382dbbb632c765093 Gitweb: http://git.kernel.org/tip/ced5b697a76d325e7a7ac7d382dbbb632c765093 Author: Brandon Phiilps <[email protected]> AuthorDate: Wed, 10 Feb 2010 01:20:06 -0800 Committer: H. Peter Anvin <[email protected]> CommitDate: Wed, 10 Feb 2010 14:27:28 -0800
x86: Avoid race condition in pci_enable_msix()
Keep chip_data in create_irq_nr and destroy_irq.
When two drivers are setting up MSI-X at the same time via pci_enable_msix() there is a race. See this dmesg excerpt:
[ 85.170610] ixgbe 0000:02:00.1: irq 97 for MSI/MSI-X [ 85.170611] alloc irq_desc for 99 on node -1 [ 85.170613] igb 0000:08:00.1: irq 98 for MSI/MSI-X [ 85.170614] alloc kstat_irqs on node -1 [ 85.170616] alloc irq_2_iommu on node -1 [ 85.170617] alloc irq_desc for 100 on node -1 [ 85.170619] alloc kstat_irqs on node -1 [ 85.170621] alloc irq_2_iommu on node -1 [ 85.170625] ixgbe 0000:02:00.1: irq 99 for MSI/MSI-X [ 85.170626] alloc irq_desc for 101 on node -1 [ 85.170628] igb 0000:08:00.1: irq 100 for MSI/MSI-X [ 85.170630] alloc kstat_irqs on node -1 [ 85.170631] alloc irq_2_iommu on node -1 [ 85.170635] alloc irq_desc for 102 on node -1 [ 85.170636] alloc kstat_irqs on node -1 [ 85.170639] alloc irq_2_iommu on node -1 [ 85.170646] BUG: unable to handle kernel NULL pointer dereference
at 0000000000000088
As you can see igb and ixgbe are both alternating on create_irq_nr() via pci_enable_msix() in their probe function.
ixgbe: While looping through irq_desc_ptrs[] via create_irq_nr() ixgbe choses irq_desc_ptrs[102] and exits the loop, drops vector_lock and calls dynamic_irq_init. Then it sets irq_desc_ptrs[102]->chip_data = NULL via dynamic_irq_init().
igb: Grabs the vector_lock now and starts looping over irq_desc_ptrs[] via create_irq_nr(). It gets to irq_desc_ptrs[102] and does this:
cfg_new = irq_desc_ptrs[102]->chip_data; if (cfg_new->vector != 0) continue;
This hits the NULL deref.
Another possible race exists via pci_disable_msix() in a driver or in the number of error paths that call free_msi_irqs():
destroy_irq()dynamic_irq_cleanup() which sets desc->chip_data = NULL ...race window...desc->chip_data = cfg;
Remove the save and restore code for cfg in create_irq_nr() and destroy_irq() and take the desc->lock when checking the irq_cfg.
LKML-Reference: <[email protected]>
--- arch/x86/kernel/apic/io_apic.c | 18 ++++---------- include/linux/irq.h | 2 + kernel/irq/chip.c | 52 +++++++++++++++++++++++++++++++++------- 3 files changed, 50 insertions(+), 22 deletions(-)
arch/x86/kernel/apic/io_apic.c +5 -13
@@ -3228,12 +3228,9 @@ unsigned int create_irq_nr(unsigned int irq_want, int node) }spin_unlock_irqrestore (&vector_lock, flags); -if (irq >0 ) { -dynamic_irq_init (irq); -/* restore it, in case dynamic_irq_init clear it */ -if (desc_new) - desc_new->chip_data = cfg_new; - } +if (irq >0 ) +dynamic_irq_init_keep_chip_data (irq); +return irq; }
@@ -3256,17 +3253,12 @@ void destroy_irq(unsigned int irq) {unsigned long flags;struct irq_cfg *cfg; -struct irq_desc *desc; -/* store it, in case dynamic_irq_cleanup clear it */ - desc =irq_to_desc (irq); - cfg = desc->chip_data; -dynamic_irq_cleanup (irq); -/* connect back irq_cfg */ - desc->chip_data = cfg; +dynamic_irq_cleanup_keep_chip_data (irq);free_irte (irq);spin_lock_irqsave (&vector_lock, flags); + cfg =irq_to_desc (irq)->chip_data;__clear_irq_vector (irq, cfg);spin_unlock_irqrestore (&vector_lock, flags); }
include/linux/irq.h +2 -0
@@ -400,7 +400,9 @@ static inline int irq_has_action(unsigned int irq)/* Dynamic irq helper functions */ extern void dynamic_irq_init (unsigned int irq); +void dynamic_irq_init_keep_chip_data (unsigned int irq);extern void dynamic_irq_cleanup (unsigned int irq); +void dynamic_irq_cleanup_keep_chip_data (unsigned int irq);/* Set/get chip/data for an IRQ: */ extern int set_irq_chip (unsigned int irq,struct irq_chip *chip);
kernel/irq/chip.c +43 -9
84 lines not on this page · raw message
PATCH 3/35 x86: move range related operation to one file
In reply to Yinghai Luwe have almost same copies for mtrr cleanup and amd_bus checkup.
and will also use it in replacing bootmem with early_res
so try to move them together and reuse it from different parts.
also rename update_range to subtract_range as the function acctuallu doing
-v2: update comments as Christoph requested
--- arch/x86/kernel/cpu/mtrr/cleanup.c | 180 +++--------------------------------- arch/x86/kernel/mmconf-fam10h_64.c | 7 +- arch/x86/pci/amd_bus.c | 70 ++------------ include/linux/range.h | 22 +++++ kernel/Makefile | 2 +- kernel/range.c | 163 ++++++++++++++++++++++++++++++++ 6 files changed, 214 insertions(+), 230 deletions(-) create mode 100644 include/linux/range.h create mode 100644 kernel/range.c
arch/x86/kernel/cpu/mtrr/cleanup.c +15 -165
@@ -22,10 +22,10 @@#include <linux/pci.h> #include <linux/smp.h> #include <linux/cpu.h> -#include <linux/sort.h> #include <linux/mutex.h> #include <linux/uaccess.h> #include <linux/kvm_para.h> +#include <linux/range.h> #include <asm/processor.h> #include <asm/e820.h>
@@ -34,11 +34,6 @@#include "mtrr.h" -struct res_range { -unsigned long start; -unsigned long end; -}; -struct var_mtrr_range_state {unsigned long base_pfn;unsigned long size_pfn;
@@ -56,7 +51,7 @@ struct var_mtrr_state {/* Should be related to MTRR_VAR_RANGES nums */ #define RANGE_NUM 256 -static struct res_range __initdata range[RANGE_NUM ]; +static struct range __initdata range[RANGE_NUM ];static int __initdata nr_range;static struct var_mtrr_range_state __initdata range_state[RANGE_NUM ];
@@ -64,152 +59,11 @@ static struct var_mtrr_range_state __initdata range_state[RANGE_NUM];static int __initdata debug_print; #define Dprintk(x...) do { if (debug_print) printk(KERN_DEBUG x); } while (0) - -static int __init -add_range (struct res_range *range,int nr_range, -unsigned long start,unsigned long end) -{ -/* Out of slots: */ -if (nr_range >=RANGE_NUM ) -return nr_range; - - range[nr_range].start = start; - range[nr_range].end = end; - - nr_range++; - -return nr_range; -} - -static int __init -add_range_with_merge (struct res_range *range,int nr_range, -unsigned long start,unsigned long end) -{ -int i; - -/* Try to merge it with old one: */ -for (i =0 ; i < nr_range; i++) { -unsigned long final_start, final_end; -unsigned long common_start, common_end; - -if (!range[i].end) -continue ; - - common_start =max (range[i].start, start); - common_end =min (range[i].end, end); -if (common_start > common_end +1 ) -continue ; - - final_start =min (range[i].start, start); - final_end =max (range[i].end, end); - - range[i].start = final_start; - range[i].end = final_end; -return nr_range; - } - -/* Need to add it: */ -return add_range (range, nr_range, start, end); -} - -static void __init -subtract_range (struct res_range *range,unsigned long start,unsigned long end) -{ -int i, j; - -for (j =0 ; j <RANGE_NUM ; j++) { -if (!range[j].end) -continue ; - -if (start <= range[j].start && end >= range[j].end) { - range[j].start =0 ; - range[j].end =0 ; -continue ; - } - -if (start <= range[j].start && end < range[j].end && - range[j].start < end +1 ) { - range[j].start = end +1 ; -continue ; - } - - -if (start > range[j].start && end >= range[j].end && - range[j].end > start -1 ) { - range[j].end = start -1 ; -continue ; - } - -if (start > range[j].start && end < range[j].end) { -/* Find the new spare: */ -for (i =0 ; i <RANGE_NUM ; i++) { -if (range[i].end ==0 ) -break ; - } -if (i <RANGE_NUM ) { - range[i].end = range[j].end; - range[i].start = end +1 ; - }else { -printk (KERN_ERR "run of slot in ranges\n" ); - } - range[j].end = start -1 ; -continue ; - } - } -} - -static int __init cmp_range (const void *x1,const void *x2) -{ -const struct res_range *r1 = x1; -const struct res_range *r2 = x2; -long start1, start2; - - start1 = r1->start; - start2 = r2->start; - -return start1 - start2; -} - -static int __init clean_sort_range (struct res_range *range,int az) -{ -int i, j, k = az -1 , nr_range =0 ; - -for (i =0 ; i < k; i++) { -if (range[i].end) -continue ; -for (j = k; j > i; j--) { -if (range[j].end) { - k = j; -break ; - } - } -if (j == i) -break ; - range[i].start = range[k].start; - range[i].end = range[k].end; - range[k].start =0 ; - range[k].end =0 ; - k--; - } -/* count it */ -for (i =0 ; i < az; i++) { -if (!range[i].end) { - nr_range = i; -break ; - } - } - -/* sort them */ -sort (range, nr_range,sizeof (struct res_range ), cmp_range,NULL ); - -return nr_range; -} -#define BIOS_BUG_MSG KERN_WARNING \ "WARNING: BIOS bug: VAR MTRR %d contains strange UC entry under 1M, check with your system vendor!\n"static int __init -x86_get_mtrr_mem_range (struct res_range *range,int nr_range, +x86_get_mtrr_mem_range (struct range *range,int nr_range,unsigned long extra_remove_base,unsigned long extra_remove_size) {
@@ -223,13 +77,13 @@ x86_get_mtrr_mem_range(struct res_range *range, int nr_range,continue ; base = range_state[i].base_pfn; size = range_state[i].size_pfn; - nr_range =add_range_with_merge (range, nr_range, base, - base + size -1 ); + nr_range =add_range_with_merge (range,RANGE_NUM , nr_range, + base, base + size -1 ); }if (debug_print) {printk (KERN_DEBUG "After WB checking\n" );for (i =0 ; i < nr_range; i++) -printk (KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n" , +printk (KERN_DEBUG "MTRR MAP PFN: %016llx - %016llx\n" , range[i].start, range[i].end +1 ); }
@@ -252,10 +106,10 @@ x86_get_mtrr_mem_range(struct res_range *range, int nr_range, size -= (1 <<(20 -PAGE_SHIFT )) - base; base =1 <<(20 -PAGE_SHIFT ); } -subtract_range (range, base, base + size -1 ); +subtract_range (range,RANGE_NUM , base, base + size -1 ); }if (extra_remove_size) -subtract_range (range, extra_remove_base, +subtract_range (range,RANGE_NUM , extra_remove_base, extra_remove_base + extra_remove_size -1 );if (debug_print) {
@@ -263,7 +117,7 @@ x86_get_mtrr_mem_range(struct res_range *range, int nr_range,for (i =0 ; i <RANGE_NUM ; i++) {if (!range[i].end)continue ; -printk (KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n" , +printk (KERN_DEBUG "MTRR MAP PFN: %016llx - %016llx\n" , range[i].start, range[i].end +1 ); } }
@@ -273,20 +127,16 @@ x86_get_mtrr_mem_range(struct res_range *range, int nr_range,if (debug_print) {printk (KERN_DEBUG "After sorting\n" );for (i =0 ; i < nr_range; i++) -printk (KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n" , +printk (KERN_DEBUG "MTRR MAP PFN: %016llx - %016llx\n" , range[i].start, range[i].end +1 ); } -/* clear those is not used */ -for (i = nr_range; i <RANGE_NUM ; i++) -memset (&range[i],0 ,sizeof (range[i])); -return nr_range; }#ifdef CONFIG_MTRR_SANITIZER -static unsigned long __init sum_ranges (struct res_range *range,int nr_range) +static unsigned long __init sum_ranges (struct range *range,int nr_range) {unsigned long sum =0 ;int i;
@@ -621,7 +471,7 @@ static int __init parse_mtrr_spare_reg(char *arg)early_param ("mtrr_spare_reg_nr" , parse_mtrr_spare_reg);static int __init -x86_setup_var_mtrrs (struct res_range *range,int nr_range, +x86_setup_var_mtrrs (struct range *range,int nr_range,u64 chunk_size,u64 gran_size) {struct var_mtrr_state var_state;
@@ -742,7 +592,7 @@ mtrr_calc_range_state(u64 chunk_size, u64 gran_size,unsigned long x_remove_base, unsigned long x_remove_size, int i) { - static struct res_range range_new[RANGE_NUM]; + static struct range range_new[RANGE_NUM];unsigned long range_sums_new;static int nr_range_new;int num_reg;
@@ -869,10 +719,10 @@ int __init mtrr_cleanup(unsigned address_bits)* [0, 1M) should always be covered by var mtrr with WB * and fixed mtrrs should take effect before var mtrr for it: */ - nr_range =add_range_with_merge (range, nr_range,0 , + nr_range =add_range_with_merge (range,RANGE_NUM , nr_range,0 , (1ULL <<(20 -PAGE_SHIFT )) -1 );/* Sort the ranges: */ -sort (range, nr_range,sizeof (struct res_range ), cmp_range,NULL ); +sort_range (range, nr_range); range_sums =sum_ranges (range, nr_range); printk(KERN_INFO "total RAM covered: %ldM\n",
arch/x86/kernel/mmconf-fam10h_64.c +2 -5
@@ -7,6 +7,8 @@#include <linux/string.h> #include <linux/pci.h> #include <linux/dmi.h> +#include <linux/range.h> +#include <asm/pci-direct.h> #include <linux/sort.h> #include <asm/io.h>
@@ -30,11 +32,6 @@ static struct pci_hostbridge_probe pci_probes[] __cpuinitdata = { { 0xff, 0, PCI_VENDOR_ID_AMD, 0x1200 }, }; -struct range { -u64 start; -u64 end; -}; -static int __cpuinit cmp_range (const void *x1,const void *x2) {const struct range *r1 = x1;
arch/x86/pci/amd_bus.c +11 -59
130 lines not on this page · raw message
include/linux/range.h new file +22 -0
@@ -0,0 +1,22 @@ +#ifndef _LINUX_RANGE_H +#define _LINUX_RANGE_H + +struct range { +u64 start; +u64 end; +}; + +int add_range (struct range *range,int az,int nr_range, +u64 start,u64 end); + + +int add_range_with_merge (struct range *range,int az,int nr_range, +u64 start,u64 end); + +void subtract_range (struct range *range,int az,u64 start,u64 end); + +int clean_sort_range (struct range *range,int az); + +void sort_range (struct range *range,int nr_range); + +#endif
kernel/Makefile +1 -1
@@ -10,7 +10,7 @@ obj-y = sched.o fork.o exec_domain.o panic.o printk.o \ kthread.o wait.o kfifo.o sys_ni.o posix-cpu-timers.o mutex.o \ hrtimer.o rwsem.o nsproxy.o srcu.o semaphore.o \ notifier.o ksysfs.o pm_qos_params.o sched_clock.o cred.o \ - async.o + async.o range.o obj-y += groups.o ifdef CONFIG_FUNCTION_TRACER
kernel/range.c new file +163 -0
163 lines not on this page · raw message
Signature · 1 line
1.6.4.2
PATCH 4/35 x86/pci: use resource_size_t in update_res
In reply to Yinghai Luprepare to enable 32bit intel and amd bus
--- arch/x86/pci/bus_numa.c | 16 ++++++++-------- arch/x86/pci/bus_numa.h | 4 ++-- 2 files changed, 10 insertions(+), 10 deletions(-)
arch/x86/pci/bus_numa.c +8 -8
@@ -51,8 +51,8 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b) } } -void __devinit update_res (struct pci_root_info *info,size_t start, -size_t end,unsigned long flags,int merge) +void __devinit update_res (struct pci_root_info *info,resource_size_t start, +resource_size_t end,unsigned long flags,int merge) {int i;struct resource *res;
@@ -65,20 +65,20 @@ void __devinit update_res(struct pci_root_info *info, size_t start,/* try to merge it with old one */ for (i =0 ; i < info->res_num; i++) { -size_t final_start, final_end; -size_t common_start, common_end; +resource_size_t final_start, final_end; +resource_size_t common_start, common_end; res = &info->res[i];if (res->flags != flags)continue ; - common_start =max ((size_t )res->start, start); - common_end =min ((size_t )res->end, end); + common_start =max (res->start, start); + common_end =min (res->end, end);if (common_start > common_end +1 )continue ; - final_start =min ((size_t )res->start, start); - final_end =max ((size_t )res->end, end); + final_start =min (res->start, start); + final_end =max (res->end, end); res->start = final_start; res->end = final_end;
arch/x86/pci/bus_numa.h +2 -2
@@ -22,6 +22,6 @@ extern int pci_root_num;extern struct pci_root_info pci_root_info[PCI_ROOT_NR ];extern int found_all_numa_early; -extern void update_res (struct pci_root_info *info,size_t start, -size_t end,unsigned long flags,int merge); +extern void update_res (struct pci_root_info *info,resource_size_t start, +resource_size_t end,unsigned long flags,int merge);#endif
Signature · 1 line
1.6.4.2
PATCH 5/35 x86/pci: amd one chain system to use pci read out res
In reply to Yinghai Lufound MSI amd k8 based laptops is hiding [0x70000000, 0x80000000) RAM from e820.
enable amd one chain even for all.
-v2: use bool for found, according to Andrew
--- arch/x86/pci/amd_bus.c | 7 ++++--- arch/x86/pci/bus_numa.c | 5 ----- arch/x86/pci/bus_numa.h | 1 - 3 files changed, 4 insertions(+), 9 deletions(-)
arch/x86/pci/amd_bus.c +4 -3
@@ -87,11 +87,12 @@ static int __init early_fill_mp_bus_info(void)struct range range[RANGE_NUM ];u64 val;u32 address; +bool found;if (!early_pci_allowed ())return -1 ; - found_all_numa_early =0 ; + found = false;for (i =0 ; i <ARRAY_SIZE (pci_probes); i++) {u32 id;u16 device;
@@ -105,12 +106,12 @@ static int __init early_fill_mp_bus_info(void) device = (id>>16 ) &0xffff ;if (pci_probes[i].vendor == vendor && pci_probes[i].device == device) { - found_all_numa_early =1 ; + found = true;break ; } } -if (!found_all_numa_early) +if (!found)return 0 ; pci_root_num =0 ;
arch/x86/pci/bus_numa.c +0 -5
@@ -5,7 +5,6 @@int pci_root_num;struct pci_root_info pci_root_info[PCI_ROOT_NR ]; -int found_all_numa_early;void x86_pci_root_bus_res_quirks (struct pci_bus *b) {
@@ -21,10 +20,6 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b)if (!pci_root_num)return ; -/* for amd, if only one root bus, don't need to do anything */ -if (pci_root_num <2 && found_all_numa_early) -return ; -for (i =0 ; i < pci_root_num; i++) {if (pci_root_info[i].bus_min == b->number)break ;
arch/x86/pci/bus_numa.h +0 -1
@@ -20,7 +20,6 @@ struct pci_root_info {#define PCI_ROOT_NR 4extern int pci_root_num;extern struct pci_root_info pci_root_info[PCI_ROOT_NR ]; -extern int found_all_numa_early;extern void update_res (struct pci_root_info *info,resource_size_t start,resource_size_t end,unsigned long flags,int merge);
Signature · 1 line
1.6.4.2
PATCH 6/35 x86/pci: use u64 instead of size_t in amd_bus.c
In reply to Yinghai Luprepare to enable it for 32bit
-v2: remove not needed cast
--- arch/x86/pci/amd_bus.c | 16 ++++++++-------- 1 files changed, 8 insertions(+), 8 deletions(-)
arch/x86/pci/amd_bus.c +8 -8
@@ -82,8 +82,8 @@ static int __init early_fill_mp_bus_info(void)struct pci_root_info *info;u32 reg;struct resource *res; -size_t start; -size_t end; +u64 start; +u64 end;struct range range[RANGE_NUM ];u64 val;u32 address;
@@ -173,7 +173,7 @@ static int __init early_fill_mp_bus_info(void) info = &pci_root_info[j];printk (KERN_DEBUG "node %d link %d: io port [%llx, %llx]\n" , - node, link, (u64 )start, (u64 )end); + node, link, start, end);/* kernel only handle 16 bit only */ if (end >0xffff )
@@ -207,7 +207,7 @@ static int __init early_fill_mp_bus_info(void) address =MSR_K8_TOP_MEM1 ;rdmsrl (address, val); end = (val &0xffffff800000ULL ); -printk (KERN_INFO "TOM: %016lx aka %ldM\n" , end, end>>20 ); +printk (KERN_INFO "TOM: %016llx aka %lldM\n" , end, end>>20 );if (end < (1ULL <<32 ))subtract_range (range,RANGE_NUM ,0 , end -1 );
@@ -246,7 +246,7 @@ static int __init early_fill_mp_bus_info(void) info = &pci_root_info[j];printk (KERN_DEBUG "node %d link %d: mmio [%llx, %llx]" , - node, link, (u64 )start, (u64 )end); + node, link, start, end);/* * some sick allocation would have range overlap with fam10h * mmconf range, so need to update start and end.
@@ -272,13 +272,13 @@ static int __init early_fill_mp_bus_info(void) endx = fam10h_mmconf_start -1 ;update_res (info, start, endx,IORESOURCE_MEM ,0 );subtract_range (range,RANGE_NUM , start, endx); -printk (KERN_CONT " ==> [%llx, %llx]" , (u64 )start, endx); +printk (KERN_CONT " ==> [%llx, %llx]" , start, endx); start = fam10h_mmconf_end +1 ; changed =1 ; }if (changed) {if (start <= end) { -printk (KERN_CONT " %s [%llx, %llx]" , endx?"and" :"==>" , (u64 )start, (u64 )end); +printk (KERN_CONT " %s [%llx, %llx]" , endx ?"and" :"==>" , start, end); }else {printk (KERN_CONT "%s\n" , endx?"" :" ==> none" );continue ;
@@ -301,7 +301,7 @@ static int __init early_fill_mp_bus_info(void) address =MSR_K8_TOP_MEM2 ;rdmsrl (address, val); end = (val &0xffffff800000ULL ); -printk (KERN_INFO "TOM2: %016lx aka %ldM\n" , end, end>>20 ); +printk (KERN_INFO "TOM2: %016llx aka %lldM\n" , end, end>>20 );subtract_range (range,RANGE_NUM ,1ULL <<32 , end -1 ); }
Signature · 1 line
1.6.4.2
PATCH 7/35 x86/pci: add cap_resource
In reply to Yinghai Luprepare for 32bit pci root bus
-v2: hpa said we should compare with (resource_size_t)~0 -v3: according to Linus to use MAX_RESOURCE instead.
also need need to put related patches together
-v4: according to Andrew, use min in cap_resource()
--- arch/x86/pci/amd_bus.c | 8 +++++--- arch/x86/pci/bus_numa.c | 4 ++++ include/linux/range.h | 8 ++++++++ 3 files changed, 17 insertions(+), 3 deletions(-)
arch/x86/pci/amd_bus.c +5 -3
@@ -201,7 +201,7 @@ static int __init early_fill_mp_bus_info(void)memset (range,0 ,sizeof (range));/* 0xfd00000000-0xffffffffff for HT */ - range[0 ].end = (0xfdULL <<32 ) -1 ; + range[0 ].end =cap_resource ((0xfdULL <<32 ) -1 );/* need to take out [0, TOM) for RAM*/ address =MSR_K8_TOP_MEM1 ;
@@ -286,7 +286,8 @@ static int __init early_fill_mp_bus_info(void) } } -update_res (info, start, end,IORESOURCE_MEM ,1 ); +update_res (info,cap_resource (start),cap_resource (end), +IORESOURCE_MEM ,1 );subtract_range (range,RANGE_NUM , start, end);printk (KERN_CONT "\n" ); }
@@ -321,7 +322,8 @@ static int __init early_fill_mp_bus_info(void)if (!range[i].end)continue ; -update_res (info, range[i].start, range[i].end, +update_res (info,cap_resource (range[i].start), +cap_resource (range[i].end),IORESOURCE_MEM ,1 ); } }
arch/x86/pci/bus_numa.c +4 -0
@@ -1,5 +1,6 @@#include <linux/init.h> #include <linux/pci.h> +#include <linux/range.h> #include "bus_numa.h"
@@ -55,6 +56,9 @@ void __devinit update_res(struct pci_root_info *info, resource_size_t start,if (start > end)return ; +if (start ==MAX_RESOURCE ) +return ; +if (!merge) goto addit;
include/linux/range.h +8 -0
@@ -19,4 +19,12 @@ int clean_sort_range(struct range *range, int az);void sort_range (struct range *range,int nr_range); +#define MAX_RESOURCE ((resource_size_t)~0) +static inline resource_size_t cap_resource (u64 val) +{ +if (val >MAX_RESOURCE ) +return MAX_RESOURCE ; + +return val; +}#endif
Signature · 1 line
1.6.4.2
PATCH 8/35 x86/pci: enable pci root res read out for 32bit too
In reply to Yinghai Lushould be good for 32bit too.
-v3: cast res->start
-v4: according to Linus, to use %pR instead of cast
--- arch/x86/pci/Makefile | 3 +-- arch/x86/pci/amd_bus.c | 18 ++---------------- arch/x86/pci/bus_numa.h | 4 ++-- arch/x86/pci/i386.c | 4 ---- 4 files changed, 5 insertions(+), 24 deletions(-)
arch/x86/pci/Makefile +1 -2
@@ -14,8 +14,7 @@ obj-$(CONFIG_X86_VISWS) += visws.o obj-$(CONFIG_X86_NUMAQ) += numaq_32.o obj-y += common.o early.o -obj-y += amd_bus.o -obj-$(CONFIG_X86_64) += bus_numa.o +obj-y += amd_bus.o bus_numa.o ifeq ($(CONFIG_PCI_DEBUG),y) EXTRA_CFLAGS += -DDEBUG
arch/x86/pci/amd_bus.c +2 -16
@@ -6,9 +6,7 @@#include <asm/pci_x86.h> -#ifdef CONFIG_X86_64 #include <asm/pci-direct.h> -#endif #include "bus_numa.h"
@@ -17,8 +15,6 @@* also get peer root bus resource for io,mmio */ -#ifdef CONFIG_X86_64 -struct pci_hostbridge_probe {u32 bus;u32 slot;
@@ -339,24 +335,14 @@ static int __init early_fill_mp_bus_info(void) info->bus_min, info->bus_max, info->node, info->link);for (j =0 ; j < res_num; j++) { res = &info->res[j]; -printk (KERN_DEBUG "bus: %02x index %x %s: [%llx, %llx]\n" , - busnum, j, - (res->flags &IORESOURCE_IO )?"io port" :"mmio" , - res->start, res->end); +printk (KERN_DEBUG "bus: %02x index %x %pR\n" , + busnum, j, res); } }return 0 ; } -#else /* !CONFIG_X86_64 */ - -static int __init early_fill_mp_bus_info (void ) {return 0 ; } - -#endif /* !CONFIG_X86_64 */ - -/* common 32/64 bit code */ -#define ENABLE_CF8_EXT_CFG (1ULL << 46)static void enable_pci_io_ecs (void *unused)
arch/x86/pci/bus_numa.h +2 -2
@@ -1,5 +1,5 @@ -#ifdef CONFIG_X86_64 - +#ifndef __BUS_NUMA_H +#define __BUS_NUMA_H/* * sub bus (transparent) will use entres from 3 to store extra from * root, so need to make sure we have enough slot there, Should we
arch/x86/pci/i386.c +0 -4
@@ -257,10 +257,6 @@ void __init pcibios_resource_survey(void)*/ fs_initcall (pcibios_assign_resources); -void __weak x86_pci_root_bus_res_quirks (struct pci_bus *b) -{ -} -/* * If we set up a device for bus mastering, we need to check the latency * timer as certain crappy BIOSes forget to set it properly.
Signature · 1 line
1.6.4.2
PATCH 9/35 x86: change range end to start+size
In reply to Yinghai Luso make interface more consistent with early_res.
later we can share some code with early_res.
--- arch/x86/kernel/cpu/mtrr/cleanup.c | 32 ++++++++++++++++---------------- arch/x86/pci/amd_bus.c | 24 ++++++++++++++---------- kernel/range.c | 20 ++++++++++---------- 3 files changed, 40 insertions(+), 36 deletions(-)
arch/x86/kernel/cpu/mtrr/cleanup.c +16 -16
@@ -78,13 +78,13 @@ x86_get_mtrr_mem_range(struct range *range, int nr_range, base = range_state[i].base_pfn; size = range_state[i].size_pfn; nr_range =add_range_with_merge (range,RANGE_NUM , nr_range, - base, base + size -1 ); + base, base + size); }if (debug_print) {printk (KERN_DEBUG "After WB checking\n" );for (i =0 ; i < nr_range; i++)printk (KERN_DEBUG "MTRR MAP PFN: %016llx - %016llx\n" , - range[i].start, range[i].end +1 ); + range[i].start, range[i].end); }/* Take out UC ranges: */
@@ -106,11 +106,11 @@ x86_get_mtrr_mem_range(struct range *range, int nr_range, size -= (1 <<(20 -PAGE_SHIFT )) - base; base =1 <<(20 -PAGE_SHIFT ); } -subtract_range (range,RANGE_NUM , base, base + size -1 ); +subtract_range (range,RANGE_NUM , base, base + size); }if (extra_remove_size)subtract_range (range,RANGE_NUM , extra_remove_base, - extra_remove_base + extra_remove_size -1 ); + extra_remove_base + extra_remove_size);if (debug_print) {printk (KERN_DEBUG "After UC checking\n" );
@@ -118,7 +118,7 @@ x86_get_mtrr_mem_range(struct range *range, int nr_range,if (!range[i].end)continue ;printk (KERN_DEBUG "MTRR MAP PFN: %016llx - %016llx\n" , - range[i].start, range[i].end +1 ); + range[i].start, range[i].end); } }
@@ -128,7 +128,7 @@ x86_get_mtrr_mem_range(struct range *range, int nr_range,printk (KERN_DEBUG "After sorting\n" );for (i =0 ; i < nr_range; i++)printk (KERN_DEBUG "MTRR MAP PFN: %016llx - %016llx\n" , - range[i].start, range[i].end +1 ); + range[i].start, range[i].end); }return nr_range;
@@ -142,7 +142,7 @@ static unsigned long __init sum_ranges(struct range *range, int nr_range)int i;for (i =0 ; i < nr_range; i++) - sum += range[i].end +1 - range[i].start; + sum += range[i].end - range[i].start;return sum; }
@@ -489,7 +489,7 @@ x86_setup_var_mtrrs(struct range *range, int nr_range,/* Write the range: */ for (i =0 ; i < nr_range; i++) {set_var_mtrr_range (&var_state, range[i].start, - range[i].end - range[i].start +1 ); + range[i].end - range[i].start); }/* Write the last range: */
@@ -720,7 +720,7 @@ int __init mtrr_cleanup(unsigned address_bits)* and fixed mtrrs should take effect before var mtrr for it: */ nr_range =add_range_with_merge (range,RANGE_NUM , nr_range,0 , - (1ULL <<(20 -PAGE_SHIFT )) -1 ); +1ULL <<(20 -PAGE_SHIFT ));/* Sort the ranges: */ sort_range (range, nr_range);
@@ -939,9 +939,9 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) nr_range =0 ;if (mtrr_tom2) { range[nr_range].start = (1ULL <<(32 -PAGE_SHIFT )); - range[nr_range].end = (mtrr_tom2 >>PAGE_SHIFT ) -1 ; -if (highest_pfn < range[nr_range].end +1 ) - highest_pfn = range[nr_range].end +1 ; + range[nr_range].end = mtrr_tom2 >>PAGE_SHIFT ; +if (highest_pfn < range[nr_range].end) + highest_pfn = range[nr_range].end; nr_range++; } nr_range =x86_get_mtrr_mem_range (range, nr_range,0 ,0 );
@@ -953,15 +953,15 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)/* Check the holes: */ for (i =0 ; i < nr_range -1 ; i++) { -if (range[i].end +1 < range[i+1 ].start) - total_trim_size +=real_trim_memory (range[i].end +1 , +if (range[i].end < range[i+1 ].start) + total_trim_size +=real_trim_memory (range[i].end, range[i+1 ].start); }/* Check the top: */ i = nr_range -1 ; -if (range[i].end +1 < end_pfn) - total_trim_size +=real_trim_memory (range[i].end +1 , +if (range[i].end < end_pfn) + total_trim_size +=real_trim_memory (range[i].end, end_pfn);if (total_trim_size) {
arch/x86/pci/amd_bus.c +14 -10
@@ -145,7 +145,7 @@ static int __init early_fill_mp_bus_info(void) def_link = (reg >>8 ) &0x03 ;memset (range,0 ,sizeof (range)); - range[0 ].end =0xffff ; +add_range (range,RANGE_NUM ,0 ,0 ,0xffff +1 );/* io port resource */ for (i =0 ; i <4 ; i++) { reg =read_pci_config (bus, slot,1 ,0xc0 + (i <<3 ));
@@ -175,7 +175,7 @@ static int __init early_fill_mp_bus_info(void)if (end >0xffff ) end =0xffff ;update_res (info, start, end,IORESOURCE_IO ,1 ); -subtract_range (range,RANGE_NUM , start, end); +subtract_range (range,RANGE_NUM , start, end +1 ); }/* add left over io port range to def node/link, [0, 0xffff] */ /* find the position */
@@ -190,14 +190,16 @@ static int __init early_fill_mp_bus_info(void)if (!range[i].end)continue ; -update_res (info, range[i].start, range[i].end, +update_res (info, range[i].start, range[i].end -1 ,IORESOURCE_IO ,1 ); } }memset (range,0 ,sizeof (range));/* 0xfd00000000-0xffffffffff for HT */ - range[0 ].end =cap_resource ((0xfdULL <<32 ) -1 ); + end =cap_resource ((0xfdULL <<32 ) -1 ); + end++; +add_range (range,RANGE_NUM ,0 ,0 , end);/* need to take out [0, TOM) for RAM*/ address =MSR_K8_TOP_MEM1 ;
@@ -205,14 +207,15 @@ static int __init early_fill_mp_bus_info(void) end = (val &0xffffff800000ULL );printk (KERN_INFO "TOM: %016llx aka %lldM\n" , end, end>>20 );if (end < (1ULL <<32 )) -subtract_range (range,RANGE_NUM ,0 , end -1 ); +subtract_range (range,RANGE_NUM ,0 , end);/* get mmconfig */ get_pci_mmcfg_amd_fam10h_range ();/* need to take out mmconf range */ if (fam10h_mmconf_end) {printk (KERN_DEBUG "Fam 10h mmconf [%llx, %llx]\n" , fam10h_mmconf_start, fam10h_mmconf_end); -subtract_range (range,RANGE_NUM , fam10h_mmconf_start, fam10h_mmconf_end); +subtract_range (range,RANGE_NUM , fam10h_mmconf_start, + fam10h_mmconf_end +1 ); }/* mmio resource */
@@ -267,7 +270,8 @@ static int __init early_fill_mp_bus_info(void)/* we got a hole */ endx = fam10h_mmconf_start -1 ;update_res (info, start, endx,IORESOURCE_MEM ,0 ); -subtract_range (range,RANGE_NUM , start, endx); +subtract_range (range,RANGE_NUM , start, + endx +1 );printk (KERN_CONT " ==> [%llx, %llx]" , start, endx); start = fam10h_mmconf_end +1 ; changed =1 ;
@@ -284,7 +288,7 @@ static int __init early_fill_mp_bus_info(void)update_res (info,cap_resource (start),cap_resource (end),IORESOURCE_MEM ,1 ); -subtract_range (range,RANGE_NUM , start, end); +subtract_range (range,RANGE_NUM , start, end +1 );printk (KERN_CONT "\n" ); }
@@ -299,7 +303,7 @@ static int __init early_fill_mp_bus_info(void)rdmsrl (address, val); end = (val &0xffffff800000ULL );printk (KERN_INFO "TOM2: %016llx aka %lldM\n" , end, end>>20 ); -subtract_range (range,RANGE_NUM ,1ULL <<32 , end -1 ); +subtract_range (range,RANGE_NUM ,1ULL <<32 , end); }/*
@@ -319,7 +323,7 @@ static int __init early_fill_mp_bus_info(void)continue ;update_res (info,cap_resource (range[i].start), -cap_resource (range[i].end), +cap_resource (range[i].end -1 ),IORESOURCE_MEM ,1 ); } }
kernel/range.c +10 -10
@@ -13,7 +13,7 @@int add_range (struct range *range,int az,int nr_range,u64 start,u64 end) { -if (start > end) +if (start >= end)return nr_range;/* Out of slots: */
@@ -33,7 +33,7 @@ int add_range_with_merge(struct range *range, int az, int nr_range, {int i; -if (start > end) +if (start >= end)return nr_range;/* Try to merge it with old one: */
@@ -46,7 +46,7 @@ int add_range_with_merge(struct range *range, int az, int nr_range, common_start =max (range[i].start, start); common_end =min (range[i].end, end); -if (common_start > common_end +1 ) +if (common_start > common_end)continue ; final_start =min (range[i].start, start);
@@ -65,7 +65,7 @@ void subtract_range(struct range *range, int az, u64 start, u64 end) {int i, j; -if (start > end) +if (start >= end)return ;for (j =0 ; j < az; j++) {
@@ -79,15 +79,15 @@ void subtract_range(struct range *range, int az, u64 start, u64 end) }if (start <= range[j].start && end < range[j].end && - range[j].start < end +1 ) { - range[j].start = end +1 ; + range[j].start < end) { + range[j].start = end;continue ; }if (start > range[j].start && end >= range[j].end && - range[j].end > start -1 ) { - range[j].end = start -1 ; + range[j].end > start) { + range[j].end = start;continue ; }
@@ -99,11 +99,11 @@ void subtract_range(struct range *range, int az, u64 start, u64 end) }if (i < az) { range[i].end = range[j].end; - range[i].start = end +1 ; + range[i].start = end; }else {printk (KERN_ERR "run of slot in ranges\n" ); } - range[j].end = start -1 ; + range[j].end = start;continue ; } }
Signature · 1 line
1.6.4.2
PATCH 10/35 x86: print out for RAM buffer
In reply to Yinghai Luso could check that early in bootlog
--- arch/x86/kernel/e820.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
arch/x86/kernel/e820.c +2 -0
@@ -1429,6 +1429,8 @@ void __init e820_reserve_resources_late(void) end =MAX_RESOURCE_SIZE ;if (start >= end)continue ; +printk (KERN_DEBUG "reserve RAM buffer: %016llx - %016llx " , + start, end);reserve_region_with_split (&iomem_resource, start, end,"RAM buffer" ); }
Signature · 1 line
1.6.4.2
PATCH 11/35 x86: call early_res_to_bootmem one time
In reply to Yinghai Lusimplify setup_node_mem, do use bootmem from other node. instead just find_e820_area in early_node_mem.
so we can keep the boundary between early_res and boot mem more clear. and only call civertion one time instead of for all nodes.
--- arch/x86/kernel/setup.c | 1 + arch/x86/mm/init_32.c | 1 - arch/x86/mm/init_64.c | 3 +- arch/x86/mm/numa_64.c | 62 +++++++++++++++------------------------------- 4 files changed, 22 insertions(+), 45 deletions(-)
arch/x86/kernel/setup.c +1 -0
@@ -967,6 +967,7 @@ void __init setup_arch(char **cmdline_p)#endif initmem_init (0 , max_pfn, acpi, k8); +early_res_to_bootmem (0 , max_low_pfn<<PAGE_SHIFT );#ifdef CONFIG_X86_64 /*
arch/x86/mm/init_32.c +0 -1
@@ -764,7 +764,6 @@ static unsigned long __init setup_node_bootmem(int nodeid,printk (KERN_INFO " node %d bootmap %08lx - %08lx\n" , nodeid, bootmap, bootmap + bootmap_size);free_bootmem_with_active_regions (nodeid, end_pfn); -early_res_to_bootmem (start_pfn<<PAGE_SHIFT , end_pfn<<PAGE_SHIFT );return bootmap + bootmap_size; }
arch/x86/mm/init_64.c +1 -2
@@ -579,13 +579,12 @@ void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn, PAGE_SIZE);if (bootmap ==-1L )panic ("Cannot find bootmem map of size %ld\n" , bootmap_size); +reserve_early (bootmap, bootmap + bootmap_size,"BOOTMAP" );/* don't touch min_low_pfn */ bootmap_size =init_bootmem_node (NODE_DATA (0 ), bootmap >>PAGE_SHIFT ,0 , end_pfn);e820_register_active_regions (0 , start_pfn, end_pfn); free_bootmem_with_active_regions(0, end_pfn); -early_res_to_bootmem (0 , end_pfn<<PAGE_SHIFT ); - reserve_bootmem(bootmap, bootmap_size, BOOTMEM_DEFAULT); }#endif
arch/x86/mm/numa_64.c +20 -42
106 lines not on this page · raw message
Signature · 1 line
1.6.4.2
PATCH 12/35 x86: introduce max_early_res and early_res_count
In reply to Yinghai Luto prepare allocate early res array from fine_e820_area
--- arch/x86/kernel/e820.c | 47 ++++++++++++++++++++++++++++++++--------------- 1 files changed, 32 insertions(+), 15 deletions(-)
arch/x86/kernel/e820.c +32 -15
@@ -732,14 +732,18 @@ core_initcall(e820_mark_nvs_memory);/* * Early reserved memory areas. */ -#define MAX_EARLY_RES 32 +/* +* need to make sure this one is bigger enough before +* find_e820_area could be used +*/ +#define MAX_EARLY_RES_X 32struct early_res {u64 start, end; -char name[16 ]; +char name[15 ];char overlap_ok; }; -static struct early_res early_res[MAX_EARLY_RES ]__initdata = { +static struct early_res early_res_x[MAX_EARLY_RES_X ]__initdata = { {0 ,PAGE_SIZE ,"BIOS data page" ,1 },/* BIOS data page */ #if defined(CONFIG_X86_32) && defined(CONFIG_X86_TRAMPOLINE)/*
@@ -753,12 +757,22 @@ static struct early_res early_res[MAX_EARLY_RES] __initdata = { {} }; +static int max_early_res__initdata =MAX_EARLY_RES_X ; +static struct early_res *early_res__initdata = &early_res_x[0 ]; +static int early_res_count __initdata = +#ifdef CONFIG_X86_32 + 2 +#else + 1 +#endif + ; +static int __init find_overlapped_early (u64 start,u64 end) {int i;struct early_res *r; -for (i =0 ; i <MAX_EARLY_RES && early_res[i].end; i++) { +for (i =0 ; i < max_early_res && early_res[i].end; i++) { r = &early_res[i];if (end > r->start && start < r->end)break ;
@@ -776,13 +790,14 @@ static void __init drop_range(int i) {int j; -for (j = i +1 ; j <MAX_EARLY_RES && early_res[j].end; j++) +for (j = i +1 ; j < max_early_res && early_res[j].end; j++) ;memmove (&early_res[i], &early_res[i +1 ], (j -1 - i) *sizeof (struct early_res )); early_res[j -1 ].end =0 ; + early_res_count--; }/*
@@ -801,9 +816,9 @@ static void __init drop_overlaps_that_are_ok(u64 start, u64 end)struct early_res *r;u64 lower_start, lower_end;u64 upper_start, upper_end; -char name[16 ]; +char name[15 ]; -for (i =0 ; i <MAX_EARLY_RES && early_res[i].end; i++) { +for (i =0 ; i < max_early_res && early_res[i].end; i++) { r = &early_res[i];/* Continue past non-overlapping ranges */
@@ -859,7 +874,7 @@ static void __init __reserve_early(u64 start, u64 end, char *name,struct early_res *r; i =find_overlapped_early (start, end); -if (i >=MAX_EARLY_RES ) +if (i >= max_early_res)panic ("Too many early reservations" ); r = &early_res[i];if (r->end)
@@ -872,6 +887,7 @@ static void __init __reserve_early(u64 start, u64 end, char *name, r->overlap_ok = overlap_ok;if (name)strncpy (r->name, name,sizeof (r->name) -1 ); + early_res_count++; }/*
@@ -924,7 +940,7 @@ void __init free_early(u64 start, u64 end) i =find_overlapped_early (start, end); r = &early_res[i]; -if (i >=MAX_EARLY_RES || r->end != end || r->start != start) +if (i >= max_early_res || r->end != end || r->start != start)panic ("free_early on not reserved area: %llx-%llx!" , start, end -1 );
@@ -935,14 +951,15 @@ void __init early_res_to_bootmem(u64 start, u64 end) {int i, count;u64 final_start, final_end; +int idx =0 ; count =0 ; -for (i =0 ; i <MAX_EARLY_RES && early_res[i].end; i++) +for (i =0 ; i < max_early_res && early_res[i].end; i++) count++; -printk (KERN_INFO "(%d early reservations) ==> bootmem [%010llx - %010llx]\n" , - count, start, end); -for (i =0 ; i < count; i++) { +printk (KERN_INFO "(%d/%d early reservations) ==> bootmem [%010llx - %010llx]\n" , + count - idx, max_early_res, start, end); +for (i = idx; i < count; i++) {struct early_res *r = &early_res[i];printk (KERN_INFO " #%d [%010llx - %010llx] %16s" , i, r->start, r->end, r->name);
@@ -969,7 +986,7 @@ static inline int __init bad_addr(u64 *addrp, u64 size, u64 align) again: i =find_overlapped_early (addr, addr + size); r = &early_res[i]; -if (i <MAX_EARLY_RES && r->end) { +if (i < max_early_res && r->end) { *addrp = addr =round_up (r->end, align); changed =1 ; goto again;
@@ -986,7 +1003,7 @@ static inline int __init bad_addr_size(u64 *addrp, u64 *sizep, u64 align)int changed =0 ; again: last = addr + size; -for (i =0 ; i <MAX_EARLY_RES && early_res[i].end; i++) { +for (i =0 ; i < max_early_res && early_res[i].end; i++) {struct early_res *r = &early_res[i];if (last > r->start && addr < r->start) { size = r->start - addr;
Signature · 1 line
1.6.4.2
PATCH 13/35 x86: dynamic increase early_res array size
In reply to Yinghai Luuse early_res_count to track the num, and use find_e820 to get new buffer. and copy from old to new one.
also clear early_res to prevent later invalid using
-v2 _check_and_double_early_res should take new start
--- arch/x86/kernel/e820.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 53 insertions(+), 0 deletions(-)
arch/x86/kernel/e820.c +53 -0
@@ -916,6 +916,48 @@ void __init reserve_early_overlap_ok(u64 start, u64 end, char *name)__reserve_early (start, end, name,1 ); } +static void __init __check_and_double_early_res (u64 start) +{ +u64 end, size, mem; +struct early_res *new; + +/* do we have enough slots left ? */ +if ((max_early_res - early_res_count) >max (max_early_res/8 ,2 )) +return ; + +/* double it */ + end = max_pfn_mapped <<PAGE_SHIFT ; + size =sizeof (struct early_res ) * max_early_res *2 ; + mem =find_e820_area (start, end, size,sizeof (struct early_res )); + +if (mem ==-1ULL ) +panic ("can not find more space for early_res array" ); + + new =__va (mem); +/* save the first one for own */ + new[0 ].start = mem; + new[0 ].end = mem + size; + new[0 ].overlap_ok =0 ; +/* copy old to new */ +if (early_res == early_res_x) { +memcpy (&new[1 ], &early_res[0 ], +sizeof (struct early_res ) * max_early_res); +memset (&new[max_early_res+1 ],0 , +sizeof (struct early_res ) * (max_early_res -1 )); + early_res_count++; + }else { +memcpy (&new[1 ], &early_res[1 ], +sizeof (struct early_res ) * (max_early_res -1 )); +memset (&new[max_early_res],0 , +sizeof (struct early_res ) * max_early_res); + } +memset (&early_res[0 ],0 ,sizeof (struct early_res ) * max_early_res); + early_res = new; + max_early_res *=2 ; +printk (KERN_DEBUG "early_res array is doubled to %d at [%llx - %llx]\n" , + max_early_res, mem, mem + size -1 ); +} +/* * Most early reservations come here. *
@@ -929,6 +971,8 @@ void __init reserve_early(u64 start, u64 end, char *name)if (start >= end)return ; +__check_and_double_early_res (end); +drop_overlaps_that_are_ok (start, end);__reserve_early (start, end, name,0 ); }
@@ -957,6 +1001,10 @@ void __init early_res_to_bootmem(u64 start, u64 end)for (i =0 ; i < max_early_res && early_res[i].end; i++) count++; +/* need to skip first one ?*/ +if (early_res != early_res_x) + idx =1 ; +printk (KERN_INFO "(%d/%d early reservations) ==> bootmem [%010llx - %010llx]\n" , count - idx, max_early_res, start, end);for (i = idx; i < count; i++) {
@@ -974,6 +1022,11 @@ void __init early_res_to_bootmem(u64 start, u64 end)reserve_bootmem_generic (final_start, final_end - final_start,BOOTMEM_DEFAULT ); } +/* clear them */ +memset (&early_res[0 ],0 ,sizeof (struct early_res ) * max_early_res); + early_res =NULL ; + max_early_res =0 ; + early_res_count =0 ; }/* Check for already reserved areas */
Signature · 1 line
1.6.4.2
PATCH 14/35 x86: make early_node_mem get mem > 4g if possible
In reply to Yinghai Luso we could put pgdata for the node high, and later sparse vmmap will get the section nr that need.
with this patch will make <4g ram will not use sparse vmmap
before this patch, will get, before swiotlb try get bootmem
[ 0.000000] nid=1 start=0 end=2080000 aligned=1 [ 0.000000] free [10 - 96] [ 0.000000] free [b12 - 1000] [ 0.000000] free [359f - 38a3] [ 0.000000] free [38b5 - 3a00] [ 0.000000] free [41e01 - 42000] [ 0.000000] free [73dde - 73e00] [ 0.000000] free [73fdd - 74000] [ 0.000000] free [741dd - 74200] [ 0.000000] free [743dd - 74400] [ 0.000000] free [745dd - 74600] [ 0.000000] free [747dd - 74800] [ 0.000000] free [749dd - 74a00] [ 0.000000] free [74bdd - 74c00] [ 0.000000] free [74ddd - 74e00] [ 0.000000] free [74fdd - 75000] [ 0.000000] free [751dd - 75200] [ 0.000000] free [753dd - 75400] [ 0.000000] free [755dd - 75600] [ 0.000000] free [757dd - 75800] [ 0.000000] free [759dd - 75a00] [ 0.000000] free [75bdd - 7bf5f] [ 0.000000] free [7f730 - 7f750] [ 0.000000] free [100000 - 2080000] [ 0.000000] total free 1f87170 [ 93.301474] Placing 64MB software IO TLB between ffff880075bdd000 - ffff880079bdd000 [ 93.311814] software IO TLB at phys 0x75bdd000 - 0x79bdd000
with this patch will get: before swiotlb try get bootmem
[ 0.000000] nid=1 start=0 end=2080000 aligned=1 [ 0.000000] free [a - 96] [ 0.000000] free [702 - 1000] [ 0.000000] free [359f - 3600] [ 0.000000] free [37de - 3800] [ 0.000000] free [39dd - 3a00] [ 0.000000] free [3bdd - 3c00] [ 0.000000] free [3ddd - 3e00] [ 0.000000] free [3fdd - 4000] [ 0.000000] free [41dd - 4200] [ 0.000000] free [43dd - 4400] [ 0.000000] free [45dd - 4600] [ 0.000000] free [47dd - 4800] [ 0.000000] free [49dd - 4a00] [ 0.000000] free [4bdd - 4c00] [ 0.000000] free [4ddd - 4e00] [ 0.000000] free [4fdd - 5000] [ 0.000000] free [51dd - 5200] [ 0.000000] free [53dd - 5400] [ 0.000000] free [55dd - 7bf5f] [ 0.000000] free [7f730 - 7f750] [ 0.000000] free [100428 - 100600] [ 0.000000] free [13ea01 - 13ec00] [ 0.000000] free [170800 - 2080000] [ 0.000000] total free 1f87170
[ 92.689485] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 92.699799] Placing 64MB software IO TLB between ffff8800055dd000 - ffff8800095dd000 [ 92.710916] software IO TLB at phys 0x55dd000 - 0x95dd000
so will get enough space below 4G, aka pfn 0x100000
--- arch/x86/mm/numa_64.c | 23 ++++++++++++++++++----- 1 files changed, 18 insertions(+), 5 deletions(-)
arch/x86/mm/numa_64.c +17 -4
@@ -163,14 +163,27 @@ static void * __init early_node_mem(int nodeid, unsigned long start, unsigned long end, unsigned long size, unsigned long align) { - unsigned long mem = find_e820_area(start, end, size, align); + unsigned long mem; +/* +* put it on high as possible +* something will go with NODE_DATA +*/ +if (start < (MAX_DMA_PFN <<PAGE_SHIFT )) + start =MAX_DMA_PFN <<PAGE_SHIFT ; +if (start < (MAX_DMA32_PFN <<PAGE_SHIFT ) && + end > (MAX_DMA32_PFN <<PAGE_SHIFT )) + start =MAX_DMA32_PFN <<PAGE_SHIFT ; + mem =find_e820_area (start, end, size, align);if (mem !=-1L )return __va (mem); - - start =__pa (MAX_DMA_ADDRESS ); - end = max_low_pfn_mapped <<PAGE_SHIFT ; +/* extend the search scope */ + end = max_pfn_mapped <<PAGE_SHIFT ; +if (end > (MAX_DMA32_PFN <<PAGE_SHIFT )) + start =MAX_DMA32_PFN <<PAGE_SHIFT ; +else + start =MAX_DMA_PFN <<PAGE_SHIFT ; mem =find_e820_area (start, end, size, align);if (mem !=-1L )return __va (mem);
Signature · 1 line
1.6.4.2
PATCH 15/35 x86: only call dma32_reserve_bootmem 64bit !CONFIG_NUMA
In reply to Yinghai Lu64bit NUMA already make enough space under 4G with new early_node_mem
--- arch/x86/include/asm/pci.h | 2 ++ arch/x86/include/asm/pci_64.h | 2 -- arch/x86/kernel/pci-dma.c | 13 ++++++++++--- arch/x86/kernel/setup.c | 7 ------- 4 files changed, 12 insertions(+), 12 deletions(-)
arch/x86/include/asm/pci.h +2 -0
@@ -124,6 +124,8 @@ extern void pci_iommu_alloc(void);#include "pci_64.h" #endif +void dma32_reserve_bootmem (void ); +/* implement the pci_ DMA API in terms of the generic device dma_ one */ #include <asm-generic/pci-dma-compat.h>
arch/x86/include/asm/pci_64.h +0 -2
@@ -22,8 +22,6 @@ extern int (*pci_config_read)(int seg, int bus, int dev, int fn,extern int (*pci_config_write)(int seg,int bus,int dev,int fn,int reg,int len,u32 value); -extern void dma32_reserve_bootmem (void ); -#endif /* __KERNEL__ */ #endif /* _ASM_X86_PCI_64_H */
arch/x86/kernel/pci-dma.c +10 -3
@@ -65,7 +65,7 @@ int dma_set_mask(struct device *dev, u64 mask) }EXPORT_SYMBOL (dma_set_mask); -#ifdef CONFIG_X86_64 +#if defined(CONFIG_X86_64 ) && !defined(CONFIG_NUMA )static __initdata void *dma32_bootmem_ptr;static unsigned long dma32_bootmem_size__initdata = (128ULL <<20 );
@@ -116,14 +116,21 @@ static void __init dma32_free_bootmem(void) dma32_bootmem_ptr =NULL ; dma32_bootmem_size = 0; } +#else +void __init dma32_reserve_bootmem (void ) +{ +} +static void __init dma32_free_bootmem (void ) +{ +} +#endif void __init pci_iommu_alloc (void ) { -#ifdef CONFIG_X86_64 /* free the range so iommu could get some range less than 4G */ dma32_free_bootmem (); -#endif +if (pci_swiotlb_detect ()) goto out;
arch/x86/kernel/setup.c +0 -7
@@ -969,14 +969,7 @@ void __init setup_arch(char **cmdline_p)initmem_init (0 , max_pfn, acpi, k8);early_res_to_bootmem (0 , max_low_pfn<<PAGE_SHIFT ); -#ifdef CONFIG_X86_64 -/* -* dma32_reserve_bootmem() allocates bootmem which may conflict -* with the crashkernel command line, so do that after -* reserve_crashkernel() -*/ dma32_reserve_bootmem (); -#endif reserve_ibft_region ();
Signature · 1 line
1.6.4.2
PATCH 16/35 x86: make 64 bit use early_res instead of bootmem before slab
In reply to Yinghai Lufinally we can use early_res to replace bootmem for x86_64 now.
still can use CONFIG_NO_BOOTMEM to enable it or not
-v2: fix 32bit compiling about MAX_DMA32_PFN
--- arch/x86/Kconfig | 13 +++ arch/x86/include/asm/e820.h | 6 ++ arch/x86/kernel/e820.c | 159 ++++++++++++++++++++++++++++++++--- arch/x86/kernel/setup.c | 2 + arch/x86/mm/init_64.c | 5 +- arch/x86/mm/numa_64.c | 20 ++++- include/linux/bootmem.h | 7 ++ include/linux/mm.h | 5 + include/linux/mmzone.h | 2 + mm/bootmem.c | 195 ++++++++++++++++++++++++++++++++++++++++++- mm/page_alloc.c | 59 +++++++++++++- mm/percpu.c | 3 + mm/sparse-vmemmap.c | 2 +- 13 files changed, 454 insertions(+), 24 deletions(-)
arch/x86/Kconfig +13 -0
@@ -568,6 +568,19 @@ config PARAVIRT_DEBUG Enable to debug paravirt_ops internals. Specifically, BUG if a paravirt_op is missing when it is called. +config NO_BOOTMEM + default y + bool "Disable Bootmem code" + depends on X86_64 + ---help--- + Use early_res directly instead of bootmem before slab is ready. + - allocator (buddy) [generic] + - early allocator (bootmem) [generic] + - very early allocator (reserve_early*()) [x86] + - very very early allocator (early brk model) [x86] + So reduce one layer between early allocator to final allocator + + config MEMTEST bool "Memtest" ---help---
arch/x86/include/asm/e820.h +6 -0
@@ -117,6 +117,12 @@ extern void free_early(u64 start, u64 end);extern void early_res_to_bootmem (u64 start,u64 end);extern u64 early_reserve_e820 (u64 startt,u64 sizet,u64 align); +void reserve_early_without_check (u64 start,u64 end,char *name); +u64 find_early_area (u64 ei_start,u64 ei_last,u64 start,u64 end, +u64 size,u64 align); +#include <linux/range.h> +int get_free_all_memory_range (struct range **rangep,int nodeid); +extern unsigned long e820_end_of_ram_pfn (void );extern unsigned long e820_end_of_low_ram_pfn (void ); extern int e820_find_active_region(const struct e820entry *ei,
arch/x86/kernel/e820.c +146 -13
194 lines not on this page · raw message
arch/x86/kernel/setup.c +2 -0
@@ -967,7 +967,9 @@ void __init setup_arch(char **cmdline_p)#endif initmem_init (0 , max_pfn, acpi, k8); +#ifndef CONFIG_NO_BOOTMEM early_res_to_bootmem (0 , max_low_pfn<<PAGE_SHIFT ); +#endif dma32_reserve_bootmem ();
arch/x86/mm/init_64.c +4 -1
@@ -572,6 +572,7 @@ kernel_physical_mapping_init(unsigned long start,void __init initmem_init (unsigned long start_pfn,unsigned long end_pfn,int acpi,int k8) { +#ifndef CONFIG_NO_BOOTMEM unsigned long bootmap_size, bootmap; bootmap_size =bootmem_bootmap_pages (end_pfn)<<PAGE_SHIFT ;
@@ -583,8 +584,10 @@ void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn,/* don't touch min_low_pfn */ bootmap_size =init_bootmem_node (NODE_DATA (0 ), bootmap >>PAGE_SHIFT ,0 , end_pfn); -e820_register_active_regions (0 , start_pfn, end_pfn);free_bootmem_with_active_regions (0 , end_pfn); +#else +e820_register_active_regions (0 , start_pfn, end_pfn); +#endif }#endif
arch/x86/mm/numa_64.c +15 -5
@@ -198,11 +198,13 @@ static void * __init early_node_mem(int nodeid, unsigned long start,void __init setup_node_bootmem (int nodeid,unsigned long start,unsigned long end) { -unsigned long start_pfn, last_pfn, bootmap_pages, bootmap_size; +unsigned long start_pfn, last_pfn, nodedata_phys;const int pgdat_size =roundup (sizeof (pg_data_t),PAGE_SIZE ); -unsigned long bootmap_start, nodedata_phys; -void *bootmap;int nid; +#ifndef CONFIG_NO_BOOTMEM +unsigned long bootmap_start, bootmap_pages, bootmap_size; +void *bootmap; +#endif if (!end)return ;
@@ -216,7 +218,7 @@ setup_node_bootmem(int nodeid, unsigned long start, unsigned long end) start =roundup (start,ZONE_ALIGN ); -printk (KERN_INFO "Bootmem setup node %d %016lx-%016lx\n" , nodeid, +printk (KERN_INFO "Initmem setup node %d %016lx-%016lx\n" , nodeid, start, end); start_pfn = start >>PAGE_SHIFT ;
@@ -235,10 +237,13 @@ setup_node_bootmem(int nodeid, unsigned long start, unsigned long end)printk (KERN_INFO " NODE_DATA(%d) on node %d\n" , nodeid, nid);memset (NODE_DATA (nodeid),0 ,sizeof (pg_data_t)); -NODE_DATA (nodeid)->bdata = &bootmem_node_data[nodeid]; +NODE_DATA (nodeid)->node_id = nodeid;NODE_DATA (nodeid)->node_start_pfn = start_pfn;NODE_DATA (nodeid)->node_spanned_pages = last_pfn - start_pfn; +#ifndef CONFIG_NO_BOOTMEM +NODE_DATA (nodeid)->bdata = &bootmem_node_data[nodeid]; +/* * Find a place for the bootmem map * nodedata_phys could be on other nodes by alloc_bootmem,
@@ -275,6 +280,7 @@ setup_node_bootmem(int nodeid, unsigned long start, unsigned long end)printk (KERN_INFO " bootmap(%d) on node %d\n" , nodeid, nid);free_bootmem_with_active_regions (nodeid, end); +#endif node_set_online (nodeid); }
@@ -733,6 +739,10 @@ unsigned long __init numa_free_all_bootmem(void)for_each_online_node (i) pages +=free_all_bootmem_node (NODE_DATA (i)); +#ifdef CONFIG_NO_BOOTMEM + pages +=free_all_memory_core_early (MAX_NUMNODES ); +#endif +return pages; }
include/linux/bootmem.h +7 -0
@@ -23,6 +23,7 @@ extern unsigned long max_pfn;extern unsigned long saved_max_pfn;#endif +#ifndef CONFIG_NO_BOOTMEM /* * node_bootmem_map is a map pointer - the bits represent all physical * memory pages (including holes) on the node.
@@ -37,6 +38,7 @@ typedef struct bootmem_data { } bootmem_data_t;extern bootmem_data_t bootmem_node_data[]; +#endif extern unsigned long bootmem_bootmap_pages (unsigned long );
@@ -46,6 +48,7 @@ extern unsigned long init_bootmem_node(pg_data_t *pgdat, unsigned long endpfn);extern unsigned long init_bootmem (unsigned long addr,unsigned long memend); +unsigned long free_all_memory_core_early (int nodeid);extern unsigned long free_all_bootmem_node (pg_data_t *pgdat);extern unsigned long free_all_bootmem (void );
@@ -84,6 +87,10 @@ extern void *__alloc_bootmem_node(pg_data_t *pgdat,unsigned long size, unsigned long align, unsigned long goal); +void *__alloc_bootmem_node_high (pg_data_t *pgdat, +unsigned long size, +unsigned long align, +unsigned long goal); extern void *__alloc_bootmem_node_nopanic(pg_data_t *pgdat, unsigned long size, unsigned long align,
include/linux/mm.h +5 -0
@@ -12,6 +12,7 @@#include <linux/prio_tree.h> #include <linux/debug_locks.h> #include <linux/mm_types.h> +#include <linux/range.h> struct mempolicy ;struct anon_vma ;
@@ -1049,6 +1050,10 @@ extern void get_pfn_range_for_nid(unsigned int nid,extern unsigned long find_min_pfn_with_active_regions (void );extern void free_bootmem_with_active_regions (int nid,unsigned long max_low_pfn); +int add_from_early_node_map (struct range *range,int az, +int nr_range,int nid); +void *__alloc_memory_core_early (int nodeid,u64 size,u64 align, +u64 goal,u64 limit);typedef int (*work_fn_t )(unsigned long ,unsigned long ,void *);extern void work_with_active_regions (int nid,work_fn_t work_fn,void *data);extern void sparse_memory_present_with_active_regions (int nid);
include/linux/mmzone.h +2 -0
@@ -620,7 +620,9 @@ typedef struct pglist_data {struct page_cgroup *node_page_cgroup;#endif #endif +#ifndef CONFIG_NO_BOOTMEM struct bootmem_data *bdata; +#endif #ifdef CONFIG_MEMORY_HOTPLUG /* * Must be held any time you expect node_start_pfn, node_present_pages
mm/bootmem.c +192 -3
371 lines not on this page · raw message
mm/page_alloc.c +58 -1
71 lines not on this page · raw message
mm/percpu.c +3 -0
@@ -1929,7 +1929,10 @@ int __init pcpu_embed_first_chunk(size_t reserved_size, ssize_t dyn_size, }/* copy and return the unused part */ memcpy (ptr, __per_cpu_load, ai->static_size); +#ifndef CONFIG_NO_BOOTMEM +/* fix partial free ! */ free_fn (ptr + size_sum, ai->unit_size - size_sum); +#endif } }
mm/sparse-vmemmap.c +1 -1
@@ -40,7 +40,7 @@ static void * __init_refok __earlyonly_bootmem_alloc(int node,unsigned long align, unsigned long goal) { - return __alloc_bootmem_node(NODE_DATA(node), size, align, goal); + return __alloc_bootmem_node_high(NODE_DATA(node), size, align, goal); }
Signature · 1 line
1.6.4.2
Re: [PATCH 16/35] x86: make 64 bit use early_res instead of bootmem before slab
Hi,
Quoted 8 lines · On Wed, 10 Feb 2010 01:20:20 -0800 Yinghai Lu <[email protected]> wrote:
finally we can use
early_resto replace bootmem forx86_64now.still can use
CONFIG_NO_BOOTMEMto enable it or not-v2: fix 32bit compiling about
MAX_DMA32_PFNSigned-off-by Yinghai Lu <[email protected]>
From a powerpc pseries_defconfig build (and others configs) of tip/master (9d4a5dc3080c811f36bf8175f2de1f9a6f84b176 "Merge branch 'perf/urgent'"):
mm/page_alloc.c:3468: error: implicit declaration of function 'find_early_area' mm/page_alloc.c:3483: error: implicit declaration of function 'reserve_early_without_check'
Signature · 3 lines
Cheers, Stephen Rothwell [email protected] http://www.canb.auug.org.au/~sfr/
Re: [PATCH 16/35] x86: make 64 bit use early_res instead of bootmem before slab
please check
Subject: [PATCH] x86: nobootmem fix compiling on power pc
Stephen Rothwell reported: on powerpc
x86: make 64 bit use early_res instead of bootmem before slab
cause
mm/page_alloc.c:3468: error: implicit declaration of function 'find_early_area' mm/page_alloc.c:3483: error: implicit declaration of function 'reserve_early_without_check'
actually the function is only needed for no_bootmem
--- mm/page_alloc.c | 2 ++ 1 file changed, 2 insertions(+)
mm/page_alloc.c +2 -0
@@ -3456,6 +3456,7 @@ int __init add_from_early_node_map(strucreturn nr_range; } +#ifdef CONFIG_NO_BOOTMEM void *__init __alloc_memory_core_early (int nid,u64 size,u64 align,u64 goal,u64 limit) {
@@ -3492,6 +3493,7 @@ void * __init __alloc_memory_core_early( return NULL; } +#endif void __init work_with_active_regions (int nid,work_fn_t work_fn,void *data)
Re: [PATCH 16/35] x86: make 64 bit use early_res instead of bootmem before slab
In reply to Stephen RothwellQuoted 10 lines · Stephen Rothwell
Hi,
Quoted 7 lines · On Wed, 10 Feb 2010 01:20:20 -0800 Yinghai Lu <[email protected]> wrote:
finally we can use
early_resto replace bootmem forx86_64now.still can use
CONFIG_NO_BOOTMEMto enable it or not-v2: fix 32bit compiling about
MAX_DMA32_PFN
Quoted 8 lines
Quoted 1 line
Signed-off-by Yinghai Lu <[email protected]>From a powerpc
pseries_defconfigbuild (and others configs) of tip/master (9d4a5dc3080c811f36bf8175f2de1f9a6f84b176"Merge branch 'perf/urgent'"):
mm/page_alloc.c:3468: error: implicit declaration of function 'find_early_area'mm/page_alloc.c:3483: error: implicit declaration of function 'reserve_early_without_check'
please use this one to replace that in tip/x86/bootmem
Thanks
Yinghai
Subject: [PATCH -v3 16/35] x86: make 64 bit use early_res instead of bootmem before slab
finally we can use early_res to replace bootmem for x86_64 now.
still can use CONFIG_NO_BOOTMEM to enable it or not
-v2: fix 32bit compiling about MAX_DMA32_PFN
-v3: fix PPC compiling
| mm/page_alloc.c:3468: error: implicit declaration of function 'find_early_area' | mm/page_alloc.c:3483: error: implicit declaration of function 'reserve_early_without_check'
| actually the function is only needed for no_bootmem
--- arch/x86/Kconfig | 13 ++ arch/x86/include/asm/e820.h | 6 + arch/x86/kernel/e820.c | 159 ++++++++++++++++++++++++++++++++--- arch/x86/kernel/setup.c | 2 arch/x86/mm/init_64.c | 4 arch/x86/mm/numa_64.c | 20 +++- include/linux/bootmem.h | 7 + include/linux/mm.h | 5 + include/linux/mmzone.h | 2 mm/bootmem.c | 195 +++++++++++++++++++++++++++++++++++++++++++- mm/page_alloc.c | 61 +++++++++++++ mm/percpu.c | 3 mm/sparse-vmemmap.c | 2 13 files changed, 456 insertions(+), 23 deletions(-)
arch/x86/Kconfig +13 -0
@@ -569,6 +569,19 @@ config PARAVIRT_DEBUG Enable to debug paravirt_ops internals. Specifically, BUG if a paravirt_op is missing when it is called. +config NO_BOOTMEM + default y + bool "Disable Bootmem code" + depends on X86_64 + ---help--- + Use early_res directly instead of bootmem before slab is ready. + - allocator (buddy) [generic] + - early allocator (bootmem) [generic] + - very early allocator (reserve_early*()) [x86] + - very very early allocator (early brk model) [x86] + So reduce one layer between early allocator to final allocator + + config MEMTEST bool "Memtest" ---help---
arch/x86/include/asm/e820.h +6 -0
@@ -117,6 +117,12 @@ extern void free_early(u64 start, u64 enextern void early_res_to_bootmem (u64 start,u64 end);extern u64 early_reserve_e820 (u64 startt,u64 sizet,u64 align); +void reserve_early_without_check (u64 start,u64 end,char *name); +u64 find_early_area (u64 ei_start,u64 ei_last,u64 start,u64 end, +u64 size,u64 align); +#include <linux/range.h> +int get_free_all_memory_range (struct range **rangep,int nodeid); +extern unsigned long e820_end_of_ram_pfn (void );extern unsigned long e820_end_of_low_ram_pfn (void ); extern int e820_find_active_region(const struct e820entry *ei,
arch/x86/kernel/e820.c +146 -13
194 lines not on this page · raw message
arch/x86/kernel/setup.c +2 -0
@@ -965,7 +965,9 @@ void __init setup_arch(char **cmdline_p)#endif initmem_init (0 , max_pfn, acpi, k8); +#ifndef CONFIG_NO_BOOTMEM early_res_to_bootmem (0 , max_low_pfn<<PAGE_SHIFT ); +#endif dma32_reserve_bootmem ();
arch/x86/mm/init_64.c +4 -0
@@ -572,6 +572,7 @@ kernel_physical_mapping_init(unsigned lovoid __init initmem_init (unsigned long start_pfn,unsigned long end_pfn,int acpi,int k8) { +#ifndef CONFIG_NO_BOOTMEM unsigned long bootmap_size, bootmap; bootmap_size =bootmem_bootmap_pages (end_pfn)<<PAGE_SHIFT ;
@@ -585,6 +586,9 @@ void __init initmem_init(unsigned long s 0, end_pfn);e820_register_active_regions (0 , start_pfn, end_pfn);free_bootmem_with_active_regions (0 , end_pfn); +#else +e820_register_active_regions (0 , start_pfn, end_pfn); +#endif }#endif
arch/x86/mm/numa_64.c +15 -5
@@ -198,11 +198,13 @@ static void * __init early_node_mem(intvoid __init setup_node_bootmem (int nodeid,unsigned long start,unsigned long end) { -unsigned long start_pfn, last_pfn, bootmap_pages, bootmap_size; +unsigned long start_pfn, last_pfn, nodedata_phys;const int pgdat_size =roundup (sizeof (pg_data_t),PAGE_SIZE ); -unsigned long bootmap_start, nodedata_phys; -void *bootmap;int nid; +#ifndef CONFIG_NO_BOOTMEM +unsigned long bootmap_start, bootmap_pages, bootmap_size; +void *bootmap; +#endif if (!end)return ;
@@ -216,7 +218,7 @@ setup_node_bootmem(int nodeid, unsigned start =roundup (start,ZONE_ALIGN ); -printk (KERN_INFO "Bootmem setup node %d %016lx-%016lx\n" , nodeid, +printk (KERN_INFO "Initmem setup node %d %016lx-%016lx\n" , nodeid, start, end); start_pfn = start >>PAGE_SHIFT ;
@@ -235,10 +237,13 @@ setup_node_bootmem(int nodeid, unsignedprintk (KERN_INFO " NODE_DATA(%d) on node %d\n" , nodeid, nid);memset (NODE_DATA (nodeid),0 ,sizeof (pg_data_t)); -NODE_DATA (nodeid)->bdata = &bootmem_node_data[nodeid]; +NODE_DATA (nodeid)->node_id = nodeid;NODE_DATA (nodeid)->node_start_pfn = start_pfn;NODE_DATA (nodeid)->node_spanned_pages = last_pfn - start_pfn; +#ifndef CONFIG_NO_BOOTMEM +NODE_DATA (nodeid)->bdata = &bootmem_node_data[nodeid]; +/* * Find a place for the bootmem map * nodedata_phys could be on other nodes by alloc_bootmem,
@@ -275,6 +280,7 @@ setup_node_bootmem(int nodeid, unsignedprintk (KERN_INFO " bootmap(%d) on node %d\n" , nodeid, nid);free_bootmem_with_active_regions (nodeid, end); +#endif node_set_online (nodeid); }
@@ -700,6 +706,10 @@ unsigned long __init numa_free_all_bootmfor_each_online_node (i) pages +=free_all_bootmem_node (NODE_DATA (i)); +#ifdef CONFIG_NO_BOOTMEM + pages +=free_all_memory_core_early (MAX_NUMNODES ); +#endif +return pages; }
include/linux/bootmem.h +7 -0
@@ -23,6 +23,7 @@ extern unsigned long max_pfn;extern unsigned long saved_max_pfn;#endif +#ifndef CONFIG_NO_BOOTMEM /* * node_bootmem_map is a map pointer - the bits represent all physical * memory pages (including holes) on the node.
@@ -37,6 +38,7 @@ typedef struct bootmem_data { } bootmem_data_t;extern bootmem_data_t bootmem_node_data[]; +#endif extern unsigned long bootmem_bootmap_pages (unsigned long );
@@ -46,6 +48,7 @@ extern unsigned long init_bootmem_node(p unsigned long endpfn);extern unsigned long init_bootmem (unsigned long addr,unsigned long memend); +unsigned long free_all_memory_core_early (int nodeid);extern unsigned long free_all_bootmem_node (pg_data_t *pgdat);extern unsigned long free_all_bootmem (void );
@@ -84,6 +87,10 @@ extern void *__alloc_bootmem_node(pg_datunsigned long size, unsigned long align, unsigned long goal); +void *__alloc_bootmem_node_high (pg_data_t *pgdat, +unsigned long size, +unsigned long align, +unsigned long goal); extern void *__alloc_bootmem_node_nopanic(pg_data_t *pgdat, unsigned long size, unsigned long align,
include/linux/mm.h +5 -0
@@ -12,6 +12,7 @@#include <linux/prio_tree.h> #include <linux/debug_locks.h> #include <linux/mm_types.h> +#include <linux/range.h> struct mempolicy ;struct anon_vma ;
@@ -1049,6 +1050,10 @@ extern void get_pfn_range_for_nid(unsignextern unsigned long find_min_pfn_with_active_regions (void );extern void free_bootmem_with_active_regions (int nid,unsigned long max_low_pfn); +int add_from_early_node_map (struct range *range,int az, +int nr_range,int nid); +void *__alloc_memory_core_early (int nodeid,u64 size,u64 align, +u64 goal,u64 limit);typedef int (*work_fn_t )(unsigned long ,unsigned long ,void *);extern void work_with_active_regions (int nid,work_fn_t work_fn,void *data);extern void sparse_memory_present_with_active_regions (int nid);
include/linux/mmzone.h +2 -0
@@ -620,7 +620,9 @@ typedef struct pglist_data {struct page_cgroup *node_page_cgroup;#endif #endif +#ifndef CONFIG_NO_BOOTMEM struct bootmem_data *bdata; +#endif #ifdef CONFIG_MEMORY_HOTPLUG /* * Must be held any time you expect node_start_pfn, node_present_pages
mm/bootmem.c +192 -3
371 lines not on this page · raw message
mm/page_alloc.c +60 -1
73 lines not on this page · raw message
mm/percpu.c +3 -0
@@ -1929,7 +1929,10 @@ int __init pcpu_embed_first_chunk(size_t }/* copy and return the unused part */ memcpy (ptr, __per_cpu_load, ai->static_size); +#ifndef CONFIG_NO_BOOTMEM +/* fix partial free ! */ free_fn (ptr + size_sum, ai->unit_size - size_sum); +#endif } }
mm/sparse-vmemmap.c +1 -1
@@ -40,7 +40,7 @@ static void * __init_refok __earlyonly_bunsigned long align, unsigned long goal) { - return __alloc_bootmem_node(NODE_DATA(node), size, align, goal); + return __alloc_bootmem_node_high(NODE_DATA(node), size, align, goal); }
Peter Zijlstra
maintainerRe: [PATCH 16/35] x86: make 64 bit use early_res instead of bootmem before slab
Quoted 11 lines · Yinghai Lu
Subject: [PATCH -v3 16/35] x86: make 64 bit use
early_resinstead of bootmem before slabfinally we can use
early_resto replace bootmem forx86_64now.still can use
CONFIG_NO_BOOTMEMto enable it or not(quoted diff) +0
-2-v2: fix 32bit compiling about MAX_DMA32_PFN -v3: fix PPC compiling|
mm/page_alloc.c:3468: error: implicit declaration of function 'find_early_area' |mm/page_alloc.c:3483: error: implicit declaration of function 'reserve_early_without_check'
Quoted 4 lines
| actually the function is only needed for
no_bootmemSigned-off-by Yinghai Lu <[email protected]>
This makes my machine unhappy and panic.. machine works fine with CONFIG_NO_BOOTMEM=n
Kernel panic - not syncing: free_early on not reserved area: 2f80000-2f9ffff! Pid: 0, comm: swapper Not tainted 2.6.33-rc8-tip-00918-gb34d361 #159 Call Trace: [<ffffffff815d12e2>] panic+0x84/0x147 [<ffffffff81cceecb>] free_early+0x64/0x6d [<ffffffff81cd2231>] free_bootmem+0xc/0xe [<ffffffff81cc1cd6>] pcpu_fc_free+0x1d/0x1f [<ffffffff81cd6056>] pcpu_embed_first_chunk+0x13a/0x27f [<ffffffff81cc1cd8>] ? pcpu_fc_alloc+0x0/0xac [<ffffffff81cc1cb9>] ? pcpu_fc_free+0x0/0x1f [<ffffffff81cc1af7>] setup_per_cpu_areas+0x82/0x239 [<ffffffff81cb5b3c>] start_kernel+0x1b8/0x43b [<ffffffff81cb52bc>] x86_64_start_reservations+0xa7/0xab [<ffffffff81cb53b8>] x86_64_start_kernel+0xf8/0x107
Re: [PATCH 16/35] x86: make 64 bit use early_res instead of bootmem before slab
Quoted 21 lines · Peter Zijlstra
Quoted 11 lines · Yinghai Lu
Subject: [PATCH -v3 16/35] x86: make 64 bit use
early_resinstead of bootmem before slabfinally we can use
early_resto replace bootmem forx86_64now.still can use
CONFIG_NO_BOOTMEMto enable it or not(quoted diff) +0
-2-v2: fix 32bit compiling about MAX_DMA32_PFN -v3: fix PPC compiling|
mm/page_alloc.c:3468: error: implicit declaration of function 'find_early_area' |mm/page_alloc.c:3483: error: implicit declaration of function 'reserve_early_without_check'Quoted 4 lines
| actually the function is only needed for
no_bootmemSigned-off-by Yinghai Lu <[email protected]>This makes my machine unhappy and panic.. machine works fine with
CONFIG_NO_BOOTMEM=n
Quoted 15 lines
Kernel panic - not syncing: free_early on not reserved area: 2f80000-2f9ffff! Pid: 0, comm: swapper Not tainted 2.6.33-rc8-tip-00918-gb34d361 #159 Call Trace: [<ffffffff815d12e2>] panic+0x84/0x147 [<ffffffff81cceecb>] free_early+0x64/0x6d [<ffffffff81cd2231>] free_bootmem+0xc/0xe [<ffffffff81cc1cd6>] pcpu_fc_free+0x1d/0x1f [<ffffffff81cd6056>] pcpu_embed_first_chunk+0x13a/0x27f [<ffffffff81cc1cd8>] ? pcpu_fc_alloc+0x0/0xac [<ffffffff81cc1cb9>] ? pcpu_fc_free+0x0/0x1f [<ffffffff81cc1af7>] setup_per_cpu_areas+0x82/0x239 [<ffffffff81cb5b3c>] start_kernel+0x1b8/0x43b [<ffffffff81cb52bc>] x86_64_start_reservations+0xa7/0xab [<ffffffff81cb53b8>] x86_64_start_kernel+0xf8/0x107
we can not handle partial free, and current only user for that is pcpu_setup...
please check this debug patch
mm/percpu.c +2 -0
@@ -1923,8 +1923,10 @@ int __init pcpu_embed_first_chunk(size_t reserved_size, ssize_t dyn_size,for (i =0 ; i < gi->nr_units; i++, ptr += ai->unit_size) {if (gi->cpu_map[i] ==NR_CPUS ) { +#ifndef CONFIG_NO_BOOTMEM /* unused unit, free whole */ free_fn (ptr, ai->unit_size); +#endif continue ; }/* copy and return the unused part */
Re: [PATCH 16/35] x86: make 64 bit use early_res instead of bootmem before slab
Quoted 38 lines · Yinghai Lu
Quoted 21 lines · Peter Zijlstra
Quoted 11 lines · Yinghai Lu
Subject: [PATCH -v3 16/35] x86: make 64 bit use
early_resinstead of bootmem before slabfinally we can use
early_resto replace bootmem forx86_64now.still can use
CONFIG_NO_BOOTMEMto enable it or not(quoted diff) +0
-2-v2: fix 32bit compiling about MAX_DMA32_PFN -v3: fix PPC compiling|
mm/page_alloc.c:3468: error: implicit declaration of function 'find_early_area' |mm/page_alloc.c:3483: error: implicit declaration of function 'reserve_early_without_check'Quoted 4 lines
| actually the function is only needed for
no_bootmemSigned-off-by Yinghai Lu <[email protected]>This makes my machine unhappy and panic.. machine works fine with
CONFIG_NO_BOOTMEM=nQuoted 15 lines
Kernel panic - not syncing: free_early on not reserved area: 2f80000-2f9ffff! Pid: 0, comm: swapper Not tainted 2.6.33-rc8-tip-00918-gb34d361 #159 Call Trace: [<ffffffff815d12e2>] panic+0x84/0x147 [<ffffffff81cceecb>] free_early+0x64/0x6d [<ffffffff81cd2231>] free_bootmem+0xc/0xe [<ffffffff81cc1cd6>] pcpu_fc_free+0x1d/0x1f [<ffffffff81cd6056>] pcpu_embed_first_chunk+0x13a/0x27f [<ffffffff81cc1cd8>] ? pcpu_fc_alloc+0x0/0xac [<ffffffff81cc1cb9>] ? pcpu_fc_free+0x0/0x1f [<ffffffff81cc1af7>] setup_per_cpu_areas+0x82/0x239 [<ffffffff81cb5b3c>] start_kernel+0x1b8/0x43b [<ffffffff81cb52bc>] x86_64_start_reservations+0xa7/0xab [<ffffffff81cb53b8>] x86_64_start_kernel+0xf8/0x107
Quoted 2 lines
we can not handle partial free, and current only user for that is
pcpu_setup...
Tejun,
any plan to pcpu_setup to use slab allocation instead of bootmem?
that code is only one user that do partial bootmem free.
Thanks
Yinghai
Tejun Heo
maintainerRe: [PATCH 16/35] x86: make 64 bit use early_res instead of bootmem before slab
Hello, Yinghai.
Quoted 16 lines · Yinghai Lu
Quoted 16 lines
Quoted 15 lines
Kernel panic - not syncing: free_early on not reserved area: 2f80000-2f9ffff! Pid: 0, comm: swapper Not tainted 2.6.33-rc8-tip-00918-gb34d361 #159 Call Trace: [<ffffffff815d12e2>] panic+0x84/0x147 [<ffffffff81cceecb>] free_early+0x64/0x6d [<ffffffff81cd2231>] free_bootmem+0xc/0xe [<ffffffff81cc1cd6>] pcpu_fc_free+0x1d/0x1f [<ffffffff81cd6056>] pcpu_embed_first_chunk+0x13a/0x27f [<ffffffff81cc1cd8>] ? pcpu_fc_alloc+0x0/0xac [<ffffffff81cc1cb9>] ? pcpu_fc_free+0x0/0x1f [<ffffffff81cc1af7>] setup_per_cpu_areas+0x82/0x239 [<ffffffff81cb5b3c>] start_kernel+0x1b8/0x43b [<ffffffff81cb52bc>] x86_64_start_reservations+0xa7/0xab [<ffffffff81cb53b8>] x86_64_start_kernel+0xf8/0x107
Quoted 4 lines
Quoted 1 line
we can not handle partial free, and current only user for that is
pcpu_setup...any plan to
pcpu_setupto use slab allocation instead of bootmem? that code is only one user that do partial bootmem free.
The problem is that the pcpu_embed_first_chunk() allocator depends on having a large contiguous slab of memory to overlay the percpu variables and then giving back the unused parts (due to layout and cpu_possible_mask not being contiguous). There's no way to do partial alloc/free anymore?
Thanks.
Signature · 1 line
tejun
Re: [PATCH 16/35] x86: make 64 bit use early_res instead of bootmem before slab
Quoted 21 lines · Tejun Heo
Hello, Yinghai.
Quoted 18 lines · Yinghai Lu
Quoted 17 lines
Quoted 6 lines
Kernel panic - not syncing: free_early on not reserved area: 2f80000-2f9ffff! Pid: 0, comm: swapper Not tainted 2.6.33-rc8-tip-00918-gb34d361 #159 Call Trace: [<ffffffff815d12e2>] panic+0x84/0x147 [<ffffffff81cceecb>] free_early+0x64/0x6d [<ffffffff81cd2231>] free_bootmem+0xc/0xeQuoted 9 lines
[<ffffffff81cc1cd6>] pcpu_fc_free+0x1d/0x1f [<ffffffff81cd6056>] pcpu_embed_first_chunk+0x13a/0x27f [<ffffffff81cc1cd8>] ? pcpu_fc_alloc+0x0/0xac [<ffffffff81cc1cb9>] ? pcpu_fc_free+0x0/0x1f [<ffffffff81cc1af7>] setup_per_cpu_areas+0x82/0x239 [<ffffffff81cb5b3c>] start_kernel+0x1b8/0x43b [<ffffffff81cb52bc>] x86_64_start_reservations+0xa7/0xab [<ffffffff81cb53b8>] x86_64_start_kernel+0xf8/0x107we can not handle partial free, and current only user for that is
pcpu_setup...
Quoted 8 lines
Quoted 2 lines
any plan to
pcpu_setupto use slab allocation instead of bootmem? that code is only one user that do partial bootmem free.The problem is that the
pcpu_embed_first_chunk()allocator depends on having a large contiguous slab of memory to overlay the percpu variables and then giving back the unused parts (due to layout andcpu_possible_masknot being contiguous). There's no way to do partial alloc/free anymore?
ok, will add free_early_partial to handle it.
i got impression, when we are moving slab ealier.
you said that will check to make percpu setup to use slab allocator instead.
YH
Tejun Heo
maintainerRe: [PATCH 16/35] x86: make 64 bit use early_res instead of bootmem before slab
Hello,
Quoted 1 line · Yinghai Lu
ok, will add
free_early_partialto handle it.
Great.
Quoted 2 lines
i got impression, when we are moving slab ealier. you said that will check to make percpu setup to use slab allocator instead.
I don't recall exactly but it probably was 4k remapping everything into vmalloc area and didn't need large contiguous area. The problem with the former approach was that it added a lot of extra TLB pressure. The current allocator avoids that by overlaying the static percpu areas onto the linear address space which requires punching holes in an contiguous area.
Thanks.
Signature · 1 line
tejun
PATCH 1/1 early_res: add free_early_partial
In reply to Tejun Heoto free partial for pcpu_setup...
--- arch/x86/kernel/setup_percpu.c | 6 ++++ include/linux/early_res.h | 1 kernel/early_res.c | 55 +++++++++++++++++++++++++++++++++++++++++ mm/percpu.c | 3 -- 4 files changed, 62 insertions(+), 3 deletions(-)
arch/x86/kernel/setup_percpu.c +6 -0
@@ -137,7 +137,13 @@ static void * __init pcpu_fc_alloc(unsigstatic void __init pcpu_fc_free (void *ptr,size_t size) { +#ifdef CONFIG_NO_BOOTMEM +u64 start =__pa (ptr); +u64 end = start + size; +free_early_partial (start, end); +#else free_bootmem (__pa (ptr), size); +#endif }static int __init pcpu_cpu_distance (unsigned int from,unsigned int to)
include/linux/early_res.h +1 -0
@@ -5,6 +5,7 @@extern void reserve_early (u64 start,u64 end,char *name);extern void reserve_early_overlap_ok (u64 start,u64 end,char *name);extern void free_early (u64 start,u64 end); +void free_early_partial (u64 start,u64 end);extern void early_res_to_bootmem (u64 start,u64 end);void reserve_early_without_check (u64 start,u64 end,char *name);
kernel/early_res.c +55 -0
67 lines not on this page · raw message
mm/percpu.c +0 -3
@@ -1929,10 +1929,7 @@ int __init pcpu_embed_first_chunk(size_t }/* copy and return the unused part */ memcpy (ptr, __per_cpu_load, ai->static_size); -#ifndef CONFIG_NO_BOOTMEM -/* fix partial free ! */ free_fn (ptr + size_sum, ai->unit_size - size_sum); -#endif } }
Re: [PATCH] early_res: add free_early_partial
Quoted 6 lines · Yinghai Lu
to free partial for
pcpu_setup...Signed-off-by Yinghai Lu <[email protected]>
This seems to cure my panic..
PATCH 1/1 early_res: need to save name aside with free_early_partial
In reply to Yinghai Lunoticed some early_res got blank name.
it turns out reserve_early_without_check could update allocate new early_res and copy old early_res already. so can not take early_res as parameter.
--- kernel/early_res.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
kernel/early_res.c +9 -2
@@ -79,9 +79,16 @@ static void __init drop_range_partial(in/* make head segment */ early_res[i].end = common_start;if (old_end > common_end) { +char name[15 ]; + +/* +* Save name aside, in reserve_early_ have allocated +* and new early_res array because auto double +*/ +strncpy (name, early_res[i].name, +sizeof (early_res[i].name) -1 );/* add another for left over on tail */ -reserve_early_without_check (common_end, old_end, - early_res[i].name); +reserve_early_without_check (common_end, old_end, name); }return ; }else {
PATCH 17/35 sparsemem: put usemap for one node together
In reply to Yinghai Lucould save some buf instead of applying one by one
could help that system that is going to use early_res instead of bootmem less entries in early_res make search more faster on system with more memory.
--- mm/sparse.c | 84 ++++++++++++++++++++++++++++++++++++++++++++++------------ 1 files changed, 66 insertions(+), 18 deletions(-)
mm/sparse.c +66 -18
@@ -271,7 +271,8 @@ static unsigned long *__kmalloc_section_usemap(void)#ifdef CONFIG_MEMORY_HOTREMOVE static unsigned long *__init -sparse_early_usemap_alloc_pgdat_section (struct pglist_data *pgdat) +sparse_early_usemaps_alloc_pgdat_section (struct pglist_data *pgdat, +unsigned long count) {unsigned long section_nr;
@@ -286,7 +287,7 @@ sparse_early_usemap_alloc_pgdat_section(struct pglist_data *pgdat)* this problem. */ section_nr =pfn_to_section_nr (__pa (pgdat) >>PAGE_SHIFT ); -return alloc_bootmem_section (usemap_size (), section_nr); +return alloc_bootmem_section (usemap_size () * count, section_nr); }static void __init check_usemap_section_nr (int nid,unsigned long *usemap)
@@ -329,7 +330,8 @@ static void __init check_usemap_section_nr(int nid, unsigned long *usemap) }#else static unsigned long *__init -sparse_early_usemap_alloc_pgdat_section (struct pglist_data *pgdat) +sparse_early_usemaps_alloc_pgdat_section (struct pglist_data *pgdat, +unsigned long count) {return NULL ; }
@@ -339,27 +341,40 @@ static void __init check_usemap_section_nr(int nid, unsigned long *usemap) }#endif /* CONFIG_MEMORY_HOTREMOVE */ -static unsigned long *__init sparse_early_usemap_alloc (unsigned long pnum) +static void __init sparse_early_usemaps_alloc_node (unsigned long **usemap_map, +unsigned long pnum_begin, +unsigned long pnum_end, +unsigned long usemap_count,int nodeid) { -unsigned long *usemap; -struct mem_section *ms =__nr_to_section (pnum); -int nid =sparse_early_nid (ms); - - usemap =sparse_early_usemap_alloc_pgdat_section (NODE_DATA (nid)); -if (usemap) -return usemap; +void *usemap; +unsigned long pnum; +int size =usemap_size (); - usemap =alloc_bootmem_node (NODE_DATA (nid),usemap_size ()); + usemap =sparse_early_usemaps_alloc_pgdat_section (NODE_DATA (nodeid), + usemap_count);if (usemap) { -check_usemap_section_nr (nid, usemap); -return usemap; +for (pnum = pnum_begin; pnum < pnum_end; pnum++) { +if (!present_section_nr (pnum)) +continue ; + usemap_map[pnum] = usemap; + usemap += size; + } +return ; } -/* Stupid: suppress gcc warning for SPARSEMEM && !NUMA */ - nid =0 ; + usemap =alloc_bootmem_node (NODE_DATA (nodeid), size * usemap_count); +if (usemap) { +for (pnum = pnum_begin; pnum < pnum_end; pnum++) { +if (!present_section_nr (pnum)) +continue ; + usemap_map[pnum] = usemap; + usemap += size; +check_usemap_section_nr (nodeid, usemap_map[pnum]); + } +return ; + }printk (KERN_WARNING "%s: allocation failed\n" , __func__); -return NULL ; }#ifndef CONFIG_SPARSEMEM_VMEMMAP
@@ -396,6 +411,7 @@ static struct page __init *sparse_early_mem_map_alloc(unsigned long pnum)void __attribute__((weak))__meminit vmemmap_populate_print_last (void ) { } +/* * Allocate the accumulated non-linear sections, allocate a mem_map * for each and record the physical to section mapping.
@@ -407,6 +423,9 @@ void __init sparse_init(void)unsigned long *usemap;unsigned long **usemap_map;int size; +int nodeid_begin =0 ; +unsigned long pnum_begin =0 ; +unsigned long usemap_count;/* * map is using big page (aka 2M in x86 64 bit)
@@ -425,10 +444,39 @@ void __init sparse_init(void)panic ("can not allocate usemap_map\n" );for (pnum =0 ; pnum <NR_MEM_SECTIONS ; pnum++) { +struct mem_section *ms; +if (!present_section_nr (pnum))continue ; - usemap_map[pnum] =sparse_early_usemap_alloc (pnum); + ms =__nr_to_section (pnum); + nodeid_begin =sparse_early_nid (ms); + pnum_begin = pnum; +break ; + } + usemap_count =1 ; +for (pnum = pnum_begin +1 ; pnum <NR_MEM_SECTIONS ; pnum++) { +struct mem_section *ms; +int nodeid; + +if (!present_section_nr (pnum)) +continue ; + ms =__nr_to_section (pnum); + nodeid =sparse_early_nid (ms); +if (nodeid == nodeid_begin) { + usemap_count++; +continue ; + } +/* ok, we need to take cake of from pnum_begin to pnum - 1*/ +sparse_early_usemaps_alloc_node (usemap_map, pnum_begin, pnum, + usemap_count, nodeid_begin); +/* new start, update count etc*/ + nodeid_begin = nodeid; + pnum_begin = pnum; + usemap_count =1 ; } +/* ok, last chunk */ +sparse_early_usemaps_alloc_node (usemap_map, pnum_begin,NR_MEM_SECTIONS , + usemap_count, nodeid_begin);for (pnum =0 ; pnum <NR_MEM_SECTIONS ; pnum++) {if (!present_section_nr (pnum))
Signature · 1 line
1.6.4.2
PATCH 18/35 sparsemem: put mem map for one node together.
In reply to Yinghai Luadd vmemmap_alloc_block_buf for mem map only.
it will fallback old wayif can not get that big.
before this patch, when node have 128g ram installed, memmap are split into
two parts or more.
[ 0.000000] [ffffea0000000000-ffffea003fffffff] PMD -> [ffff880100600000-ffff88013e9fffff] on node 1 [ 0.000000] [ffffea0040000000-ffffea006fffffff] PMD -> [ffff88013ec00000-ffff88016ebfffff] on node 1 [ 0.000000] [ffffea0070000000-ffffea007fffffff] PMD -> [ffff882000600000-ffff8820105fffff] on node 0 [ 0.000000] [ffffea0080000000-ffffea00bfffffff] PMD -> [ffff882010800000-ffff8820507fffff] on node 0 [ 0.000000] [ffffea00c0000000-ffffea00dfffffff] PMD -> [ffff882050a00000-ffff8820709fffff] on node 0 [ 0.000000] [ffffea00e0000000-ffffea00ffffffff] PMD -> [ffff884000600000-ffff8840205fffff] on node 2 [ 0.000000] [ffffea0100000000-ffffea013fffffff] PMD -> [ffff884020800000-ffff8840607fffff] on node 2 [ 0.000000] [ffffea0140000000-ffffea014fffffff] PMD -> [ffff884060a00000-ffff8840709fffff] on node 2 [ 0.000000] [ffffea0150000000-ffffea017fffffff] PMD -> [ffff886000600000-ffff8860305fffff] on node 3 [ 0.000000] [ffffea0180000000-ffffea01bfffffff] PMD -> [ffff886030800000-ffff8860707fffff] on node 3 [ 0.000000] [ffffea01c0000000-ffffea01ffffffff] PMD -> [ffff888000600000-ffff8880405fffff] on node 4 [ 0.000000] [ffffea0200000000-ffffea022fffffff] PMD -> [ffff888040800000-ffff8880707fffff] on node 4 [ 0.000000] [ffffea0230000000-ffffea023fffffff] PMD -> [ffff88a000600000-ffff88a0105fffff] on node 5 [ 0.000000] [ffffea0240000000-ffffea027fffffff] PMD -> [ffff88a010800000-ffff88a0507fffff] on node 5 [ 0.000000] [ffffea0280000000-ffffea029fffffff] PMD -> [ffff88a050a00000-ffff88a0709fffff] on node 5 [ 0.000000] [ffffea02a0000000-ffffea02bfffffff] PMD -> [ffff88c000600000-ffff88c0205fffff] on node 6 [ 0.000000] [ffffea02c0000000-ffffea02ffffffff] PMD -> [ffff88c020800000-ffff88c0607fffff] on node 6 [ 0.000000] [ffffea0300000000-ffffea030fffffff] PMD -> [ffff88c060a00000-ffff88c0709fffff] on node 6 [ 0.000000] [ffffea0310000000-ffffea033fffffff] PMD -> [ffff88e000600000-ffff88e0305fffff] on node 7 [ 0.000000] [ffffea0340000000-ffffea037fffffff] PMD -> [ffff88e030800000-ffff88e0707fffff] on node 7
after patch will get
[ 0.000000] [ffffea0000000000-ffffea006fffffff] PMD -> [ffff880100200000-ffff88016e5fffff] on node 0 [ 0.000000] [ffffea0070000000-ffffea00dfffffff] PMD -> [ffff882000200000-ffff8820701fffff] on node 1 [ 0.000000] [ffffea00e0000000-ffffea014fffffff] PMD -> [ffff884000200000-ffff8840701fffff] on node 2 [ 0.000000] [ffffea0150000000-ffffea01bfffffff] PMD -> [ffff886000200000-ffff8860701fffff] on node 3 [ 0.000000] [ffffea01c0000000-ffffea022fffffff] PMD -> [ffff888000200000-ffff8880701fffff] on node 4 [ 0.000000] [ffffea0230000000-ffffea029fffffff] PMD -> [ffff88a000200000-ffff88a0701fffff] on node 5 [ 0.000000] [ffffea02a0000000-ffffea030fffffff] PMD -> [ffff88c000200000-ffff88c0701fffff] on node 6 [ 0.000000] [ffffea0310000000-ffffea037fffffff] PMD -> [ffff88e000200000-ffff88e0701fffff] on node 7
-v2: change buf to vmemmap_buf instead according to Ingo
also add CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER according to Ingo
-v3: according to Andrew, use sizeof(name) instead of hard coded 15
--- arch/x86/mm/init_64.c | 2 +- include/linux/mm.h | 7 +++ mm/Kconfig | 4 ++ mm/sparse-vmemmap.c | 74 ++++++++++++++++++++++++++++++++- mm/sparse.c | 111 ++++++++++++++++++++++++++++++++++++++++++++++++- 5 files changed, 195 insertions(+), 3 deletions(-)
arch/x86/mm/init_64.c +1 -1
@@ -976,7 +976,7 @@ vmemmap_populate(struct page *start_page, unsigned long size, int node)if (pmd_none (*pmd)) {pte_t entry; - p =vmemmap_alloc_block (PMD_SIZE , node); + p =vmemmap_alloc_block_buf (PMD_SIZE , node);if (!p)return -ENOMEM ;
include/linux/mm.h +7 -0
@@ -1326,12 +1326,19 @@ extern int randomize_va_space;const char *arch_vma_name (struct vm_area_struct *vma);void print_vma_addr (char *prefix,unsigned long rip); +void sparse_mem_maps_populate_node (struct page **map_map, +unsigned long pnum_begin, +unsigned long pnum_end, +unsigned long map_count, +int nodeid); +struct page *sparse_mem_map_populate (unsigned long pnum,int nid);pgd_t *vmemmap_pgd_populate (unsigned long addr,int node);pud_t *vmemmap_pud_populate (pgd_t *pgd,unsigned long addr,int node);pmd_t *vmemmap_pmd_populate (pud_t *pud,unsigned long addr,int node);pte_t *vmemmap_pte_populate (pmd_t *pmd,unsigned long addr,int node);void *vmemmap_alloc_block (unsigned long size,int node); +void *vmemmap_alloc_block_buf (unsigned long size,int node);void vmemmap_verify (pte_t *,int ,unsigned long ,unsigned long );int vmemmap_populate_basepages (struct page *start_page,unsigned long pages,int node);
mm/Kconfig +4 -0
@@ -115,6 +115,10 @@ config SPARSEMEM_EXTREME config SPARSEMEM_VMEMMAP_ENABLE bool +config SPARSEMEM_ALLOC_MEM_MAP_TOGETHER + def_bool y + depends on SPARSEMEM && X86_64 + config SPARSEMEM_VMEMMAP bool "Sparse Memory virtual memmap" depends on SPARSEMEM && SPARSEMEM_VMEMMAP_ENABLE
mm/sparse-vmemmap.c +73 -1
95 lines not on this page · raw message
mm/sparse.c +110 -1
155 lines not on this page · raw message
Signature · 1 line
1.6.4.2
PATCH 19/35 x86: move bios page reserve early to head32/64.c
In reply to Yinghai Luso prepare to make one more clean early_res.c
-v2: don't need to reserve first page in early_res
because we already mark that in e820 as reserved already.
--- arch/x86/kernel/e820.c | 22 ++-------------------- arch/x86/kernel/head32.c | 10 ++++++++++ 2 files changed, 12 insertions(+), 20 deletions(-)
arch/x86/kernel/e820.c +2 -20
@@ -743,29 +743,11 @@ struct early_res {char name[15 ];char overlap_ok; }; -static struct early_res early_res_x[MAX_EARLY_RES_X ]__initdata = { - {0 ,PAGE_SIZE ,"BIOS data page" ,1 },/* BIOS data page */ -#if defined(CONFIG_X86_32) && defined(CONFIG_X86_TRAMPOLINE) -/* -* But first pinch a few for the stack/trampoline stuff -* FIXME: Don't need the extra page at 4K, but need to fix -* trampoline before removing it. (see the GDT stuff) -*/ - {PAGE_SIZE ,PAGE_SIZE +PAGE_SIZE ,"EX TRAMPOLINE" ,1 }, -#endif - - {} -}; +static struct early_res early_res_x[MAX_EARLY_RES_X ]__initdata ;static int max_early_res__initdata =MAX_EARLY_RES_X ;static struct early_res *early_res__initdata = &early_res_x[0 ]; -static int early_res_count __initdata = -#ifdef CONFIG_X86_32 - 2 -#else - 1 -#endif - ; +static int early_res_count__initdata ;static int __init find_overlapped_early (u64 start,u64 end) {
arch/x86/kernel/head32.c +10 -0
@@ -29,6 +29,16 @@ static void __init i386_default_early_setup(void)void __init i386_start_kernel (void ) { +#ifdef CONFIG_X86_TRAMPOLINE +/* +* But first pinch a few for the stack/trampoline stuff +* FIXME: Don't need the extra page at 4K, but need to fix +* trampoline before removing it. (see the GDT stuff) +*/ +reserve_early_overlap_ok (PAGE_SIZE ,PAGE_SIZE +PAGE_SIZE , +"EX TRAMPOLINE" ); +#endif +reserve_early (__pa_symbol (&_text),__pa_symbol (&__bss_stop),"TEXT DATA BSS" );#ifdef CONFIG_BLK_DEV_INITRD
Signature · 1 line
1.6.4.2
PATCH 20/35 x86: seperate early_res related code from e820.c
In reply to Yinghai Luto make e820.c smaller.
-v2: fix 32bit compiling with MAX_DMA32_PFN
--- arch/x86/include/asm/e820.h | 13 +- arch/x86/include/asm/early_res.h | 20 ++ arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/e820.c | 541 +------------------------------------- arch/x86/kernel/early_res.c | 539 +++++++++++++++++++++++++++++++++++++ 5 files changed, 562 insertions(+), 553 deletions(-) create mode 100644 arch/x86/include/asm/early_res.h create mode 100644 arch/x86/kernel/early_res.c
arch/x86/include/asm/e820.h +1 -12
@@ -109,19 +109,8 @@ static inline void early_memtest(unsigned long start, unsigned long end)extern unsigned long end_user_pfn; -extern u64 find_e820_area (u64 start,u64 end,u64 size,u64 align); -extern u64 find_e820_area_size (u64 start,u64 *sizep,u64 align); -extern void reserve_early (u64 start,u64 end,char *name); -extern void reserve_early_overlap_ok (u64 start,u64 end,char *name); -extern void free_early (u64 start,u64 end); -extern void early_res_to_bootmem (u64 start,u64 end);extern u64 early_reserve_e820 (u64 startt,u64 sizet,u64 align); - -void reserve_early_without_check (u64 start,u64 end,char *name); -u64 find_early_area (u64 ei_start,u64 ei_last,u64 start,u64 end, -u64 size,u64 align); -#include <linux/range.h> -int get_free_all_memory_range (struct range **rangep,int nodeid); +#include <asm/early_res.h> extern unsigned long e820_end_of_ram_pfn (void );extern unsigned long e820_end_of_low_ram_pfn (void );
arch/x86/include/asm/early_res.h new file +20 -0
@@ -0,0 +1,20 @@ +#ifndef _ASM_X86_EARLY_RES_H +#define _ASM_X86_EARLY_RES_H +#ifdef __KERNEL__ + +extern u64 find_e820_area (u64 start,u64 end,u64 size,u64 align); +extern u64 find_e820_area_size (u64 start,u64 *sizep,u64 align); +extern void reserve_early (u64 start,u64 end,char *name); +extern void reserve_early_overlap_ok (u64 start,u64 end,char *name); +extern void free_early (u64 start,u64 end); +extern void early_res_to_bootmem (u64 start,u64 end); + +void reserve_early_without_check (u64 start,u64 end,char *name); +u64 find_early_area (u64 ei_start,u64 ei_last,u64 start,u64 end, +u64 size,u64 align); +#include <linux/range.h> +int get_free_all_memory_range (struct range **rangep,int nodeid); + +#endif /* __KERNEL__ */ + +#endif /* _ASM_X86_EARLY_RES_H */
arch/x86/kernel/Makefile +1 -1
@@ -38,7 +38,7 @@ obj-$(CONFIG_X86_32) += probe_roms_32.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o -obj-y += bootflag.o e820.o +obj-y += bootflag.o e820.o early_res.o obj-y += pci-dma.o quirks.o i8237.o topology.o kdebugfs.o obj-y += alternative.o i8253.o pci-nommu.o hw_breakpoint.o obj-y += tsc.o io_delay.o rtc.o
arch/x86/kernel/e820.c +1 -540
560 lines not on this page · raw message
arch/x86/kernel/early_res.c new file +539 -0
539 lines not on this page · raw message
Signature · 1 line
1.6.4.2
PATCH 21/35 x86: add find_early_area_size
In reply to Yinghai Luprepare to move bck find_e820_area_size back to e820.c
--- arch/x86/kernel/early_res.c | 45 ++++++++++++++++++++++++++++++------------ 1 files changed, 32 insertions(+), 13 deletions(-)
arch/x86/kernel/early_res.c +32 -13
@@ -476,6 +476,29 @@ out:return -1ULL ; } +u64 __init find_early_area_size (u64 ei_start,u64 ei_last,u64 start, +u64 *sizep,u64 align) +{ +u64 addr, last; + + addr =round_up (ei_start, align); +if (addr < start) + addr =round_up (start, align); +if (addr >= ei_last) + goto out; + *sizep = ei_last - addr; +while (bad_addr_size (&addr, sizep, align) && addr + *sizep <= ei_last) + ; + last = addr + *sizep; +if (last > ei_last) + goto out; + +return addr; + +out: +return -1ULL ; +} +/* * Find a free area with specified alignment in a specific range. */
@@ -513,24 +536,20 @@ u64 __init find_e820_area_size(u64 start, u64 *sizep, u64 align)for (i =0 ; i < e820.nr_map; i++) {struct e820entry *ei = &e820.map[i]; -u64 addr, last; -u64 ei_last; +u64 addr; +u64 ei_start, ei_last;if (ei->type !=E820_RAM )continue ; - addr =round_up (ei->addr, align); + ei_last = ei->addr + ei->size; -if (addr < start) - addr =round_up (start, align); -if (addr >= ei_last) -continue ; - *sizep = ei_last - addr; -while (bad_addr_size (&addr, sizep, align) && - addr + *sizep <= ei_last) - ; - last = addr + *sizep; -if (last > ei_last) + ei_start = ei->addr; + addr =find_early_area_size (ei_start, ei_last, start, + sizep, align); + +if (addr ==-1ULL )continue ; +return addr; }
Signature · 1 line
1.6.4.2
PATCH 22/35 x86: move back find_e820_area to e820.c
In reply to Yinghai Lumake early_res.c more clean, so later could move it to /kernel
--- arch/x86/include/asm/e820.h | 2 + arch/x86/include/asm/early_res.h | 4 +- arch/x86/kernel/e820.c | 53 +++++++++++++++++++++++++++++++++++ arch/x86/kernel/early_res.c | 56 -------------------------------------- 4 files changed, 57 insertions(+), 58 deletions(-)
arch/x86/include/asm/e820.h +2 -0
@@ -109,6 +109,8 @@ static inline void early_memtest(unsigned long start, unsigned long end)extern unsigned long end_user_pfn; +extern u64 find_e820_area (u64 start,u64 end,u64 size,u64 align); +extern u64 find_e820_area_size (u64 start,u64 *sizep,u64 align);extern u64 early_reserve_e820 (u64 startt,u64 sizet,u64 align);#include <asm/early_res.h>
arch/x86/include/asm/early_res.h +2 -2
@@ -2,8 +2,6 @@#define _ASM_X86_EARLY_RES_H#ifdef __KERNEL__ -extern u64 find_e820_area (u64 start,u64 end,u64 size,u64 align); -extern u64 find_e820_area_size (u64 start,u64 *sizep,u64 align);extern void reserve_early (u64 start,u64 end,char *name);extern void reserve_early_overlap_ok (u64 start,u64 end,char *name);extern void free_early (u64 start,u64 end);
@@ -12,6 +10,8 @@ extern void early_res_to_bootmem(u64 start, u64 end);void reserve_early_without_check (u64 start,u64 end,char *name);u64 find_early_area (u64 ei_start,u64 ei_last,u64 start,u64 end,u64 size,u64 align); +u64 find_early_area_size (u64 ei_start,u64 ei_last,u64 start, +u64 *sizep,u64 align);#include <linux/range.h> int get_free_all_memory_range (struct range **rangep,int nodeid);
arch/x86/kernel/e820.c +53 -0
59 lines not on this page · raw message
arch/x86/kernel/early_res.c +0 -56
60 lines not on this page · raw message
Signature · 1 line
1.6.4.2
PATCH 23/35 early_res: enhance check_and_double_early_res
In reply to Yinghai Luto make it always try to start from low at first.
so make it more safe for early_memtest to reserve bad range. aka put new early_res to range that is already tested.
--- arch/x86/kernel/early_res.c | 27 ++++++++++++++++++++------- 1 files changed, 20 insertions(+), 7 deletions(-)
arch/x86/kernel/early_res.c +20 -7
@@ -180,9 +180,9 @@ void __init reserve_early_overlap_ok(u64 start, u64 end, char *name)__reserve_early (start, end, name,1 ); } -static void __init __check_and_double_early_res (u64 start) +static void __init __check_and_double_early_res (u64 ex_start,u64 ex_end) { -u64 end, size, mem; +u64 start, end, size, mem;struct early_res *new;/* do we have enough slots left ? */
@@ -190,10 +190,23 @@ static void __init __check_and_double_early_res(u64 start)return ;/* double it */ - end = max_pfn_mapped <<PAGE_SHIFT ; + mem =-1ULL ; size =sizeof (struct early_res ) * max_early_res *2 ; - mem =find_e820_area (start, end, size,sizeof (struct early_res )); - +if (early_res == early_res_x) + start =0 ; +else + start = early_res[0 ].end; + end = ex_start; +if (start + size < end) + mem =find_e820_area (start, end, size, +sizeof (struct early_res )); +if (mem ==-1ULL ) { + start = ex_end; + end = max_pfn_mapped <<PAGE_SHIFT ; +if (start + size < end) + mem =find_e820_area (start, end, size, +sizeof (struct early_res )); + }if (mem ==-1ULL )panic ("can not find more space for early_res array" );
@@ -235,7 +248,7 @@ void __init reserve_early(u64 start, u64 end, char *name)if (start >= end)return ; -__check_and_double_early_res (end); +__check_and_double_early_res (start, end);drop_overlaps_that_are_ok (start, end);__reserve_early (start, end, name,0 );
@@ -248,7 +261,7 @@ void __init reserve_early_without_check(u64 start, u64 end, char *name)if (start >= end)return ; -__check_and_double_early_res (end); +__check_and_double_early_res (start, end); r = &early_res[early_res_count];
Signature · 1 line
1.6.4.2
PATCH 24/35 x86: make 32bit support NO_BOOTMEM
In reply to Yinghai Lulet's make 32bit consistent with 64bit
-v2: Andrew pointed out for 32bit that we should use -1ULL
--- arch/x86/Kconfig | 1 - arch/x86/kernel/early_res.c | 3 +++ arch/x86/mm/init_32.c | 6 ++++++ arch/x86/mm/numa_32.c | 3 +++ 4 files changed, 12 insertions(+), 1 deletions(-)
arch/x86/Kconfig +0 -1
@@ -571,7 +571,6 @@ config PARAVIRT_DEBUG config NO_BOOTMEM default y bool "Disable Bootmem code" - depends on X86_64 ---help--- Use early_res directly instead of bootmem before slab is ready. - allocator (buddy) [generic]
arch/x86/kernel/early_res.c +3 -0
@@ -354,6 +354,9 @@ int __init get_free_all_memory_range(struct range **rangep, int nodeid)/* need to go over early_node_map to find out good range for node */ nr_range =add_from_early_node_map (range, count, nr_range, nodeid); +#ifdef CONFIG_X86_32 +subtract_range (range, count, max_low_pfn,-1ULL ); +#endif subtract_early_res (range, count); nr_range =clean_sort_range (range, count);
arch/x86/mm/init_32.c +6 -0
@@ -748,6 +748,7 @@ static void __init zone_sizes_init(void)free_area_init_nodes (max_zone_pfns); } +#ifndef CONFIG_NO_BOOTMEM static unsigned long __init setup_node_bootmem(int nodeid, unsigned long start_pfn, unsigned long end_pfn,
@@ -767,9 +768,11 @@ static unsigned long __init setup_node_bootmem(int nodeid, return bootmap + bootmap_size; } +#endif void __init setup_bootmem_allocator (void ) { +#ifndef CONFIG_NO_BOOTMEM int nodeid;unsigned long bootmap_size, bootmap;/*
@@ -781,11 +784,13 @@ void __init setup_bootmem_allocator(void)if (bootmap ==-1L )panic ("Cannot find bootmem map of size %ld\n" , bootmap_size);reserve_early (bootmap, bootmap + bootmap_size,"BOOTMAP" ); +#endif printk (KERN_INFO " mapped low ram: 0 - %08lx\n" , max_pfn_mapped<<PAGE_SHIFT );printk (KERN_INFO " low ram: 0 - %08lx\n" , max_low_pfn<<PAGE_SHIFT ); +#ifndef CONFIG_NO_BOOTMEM for_each_online_node (nodeid) {unsigned long start_pfn, end_pfn;
@@ -803,6 +808,7 @@ void __init setup_bootmem_allocator(void) bootmap =setup_node_bootmem (nodeid, start_pfn, end_pfn, bootmap); } +#endif after_bootmem =1 ; }
arch/x86/mm/numa_32.c +3 -0
@@ -418,7 +418,10 @@ void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn,for_each_online_node (nid) {memset (NODE_DATA (nid),0 ,sizeof (struct pglist_data )); +NODE_DATA (nid)->node_id = nid; +#ifndef CONFIG_NO_BOOTMEM NODE_DATA (nid)->bdata = &bootmem_node_data[nid]; +#endif }setup_bootmem_allocator ();
Signature · 1 line
1.6.4.2
PATCH 25/35 move round_up/down to kernel.h
In reply to Yinghai Luprepare to early_res moving up
--- arch/x86/include/asm/proto.h | 10 ---------- include/linux/kernel.h | 10 ++++++++++ 2 files changed, 10 insertions(+), 10 deletions(-)
arch/x86/include/asm/proto.h +0 -10
@@ -23,14 +23,4 @@ extern int reboot_force;long do_arch_prctl (struct task_struct *task,int code,unsigned long addr); -/* -* This looks more complex than it should be. But we need to -* get the type for the ~ right in round_down (it needs to be -* as wide as the result!), and we want to evaluate the macro -* arguments just once each. -*/ -#define __round_mask (x,y) ((__typeof__(x))((y)-1)) -#define round_up (x,y) ((((x)-1) | __round_mask(x,y))+1) -#define round_down (x,y) ((x) & ~__round_mask(x,y)) -#endif /* _ASM_X86_PROTO_H */
include/linux/kernel.h +10 -0
@@ -44,6 +44,16 @@ extern const char linux_proc_banner[];#define ARRAY_SIZE (arr) (sizeof(arr) / sizeof((arr)[0]) + __must_be_array(arr)) +/* +* This looks more complex than it should be. But we need to +* get the type for the ~ right in round_down (it needs to be +* as wide as the result!), and we want to evaluate the macro +* arguments just once each. +*/ +#define __round_mask (x, y) ((__typeof__(x))((y)-1)) +#define round_up (x, y) ((((x)-1) | __round_mask(x, y))+1) +#define round_down (x, y) ((x) & ~__round_mask(x, y)) +#define FIELD_SIZEOF (t, f) (sizeof(((t*)0)->f))#define DIV_ROUND_UP (n,d) (((n) + (d) - 1) / (d))#define roundup (x, y) ((((x) + ((y) - 1)) / (y)) * (y))
Signature · 1 line
1.6.4.2
Re: [PATCH 25/35] move round_up/down to kernel.h
include/linux/kernel.h extern const char linux_proc_banner[];
Quoted 5 lines · Yinghai Lu
include/linux/kernel.h +0
-0@@ -44,6 +44,16 @@ extern const char linux_proc_banner[];
[]
include/linux/kernel.h extern const char linux_proc_banner[]; · line 59
Quoted 7 lines
include/linux/kernel.h +4
-0+#define __round_mask (x, y) ((__typeof__(x))((y)-1)) +#define round_up (x, y) ((((x)-1) | __round_mask(x, y))+1) +#define round_down (x, y) ((x) & ~__round_mask(x, y)) +#define FIELD_SIZEOF (t, f) (sizeof(((t*)0)->f))#define DIV_ROUND_UP (n,d) (((n) + (d) - 1) / (d))#define roundup (x, y) ((((x) + ((y) - 1)) / (y)) * (y))
Having both roundup and round_up in kernel.h is a
near guarantee for a future incorrect use.
Can't you use a different name for this?
H. Peter Anvin
reviewerRe: [PATCH 25/35] move round_up/down to kernel.h
Quoted 6 lines · Joe Perches
Having both roundup and
round_upinkernel.his a
near guarantee for a future incorrect use.Can't you use a different name for this?
Welcome to last week's discussion.
Both of these names already exist -- yes, a rename is probably in order but it should be a separate patchset.
-hpa
Signature · 2 lines
H. Peter Anvin, Intel Open Source Technology Center I work for Intel. I don't speak on their behalf.
Andrew Morton
maintainerRe: [PATCH 25/35] move round_up/down to kernel.h
Quoted 9 lines · On Sat, 13 Feb 2010 11:52:30 -0800 "H. Peter Anvin" <[email protected]> wrote:
Quoted 6 lines · Joe Perches
Having both roundup and
round_upinkernel.his a
near guarantee for a future incorrect use.Can't you use a different name for this?
Welcome to last week's discussion.
Which seems to have been basically ignored.
Quoted 2 lines
Both of these names already exist -- yes, a rename is probably in order but it should be a separate patchset.
More than a rename is certainly in order.
As Joe says, if we just chuck these things into kernel.h(!) as-is, people will start using them and the muck gets deeper.
And it's not clear who will be shovelling that muck, and when. We haven't even worked out what needs to be done.
H. Peter Anvin
reviewerRe: [PATCH 25/35] move round_up/down to kernel.h
Quoted 9 lines · Andrew Morton
Quoted 3 lines
Both of these names already exist -- yes, a rename is probably in order but it should be a separate patchset.
More than a rename is certainly in order.
And it's not clear who will be shovelling that muck, and when. We haven't even worked out what needs to be done.
OK, I was under the impression that all that was really called for was a rename -- which is pretty straightforward, after all; it can mostly be scripted.
I guess there is a bigger discussion here, and as such we should have it now. Since in the end, though, it is going to have to be a cross-kernel change, it is probably one of those things that should be done "just before -rc1".
Let's figure out what is needed. At a very minimum, we have the following operations:
-> align downward, arbitrary alignment
-> align upward, arbitrary alignment - current roundup()
-> align downward, power of 2 alignment - current round_down()
-> align upward, power of 2 alignment - current round_up()
-> truncate downward to a power of 2 - current rounddown_pow_of_two()
-> truncate upward to a power of 2 - current roundup_pow_of_two()
Then we have some oddballs:
__ALIGN_MASK(x,m) == round_up(x, m-1)ALIGN(x,a) == round_up(x, m)PTR_ALIGN(p, a) == round_up with wrapperDIV_ROUND_UP(n,d) == roundup(n,d)/dDIV_ROUND_CLOSEST(n,d)
A structural renaming is certainly in order, but what more are you looking for, here?
-hpa
Signature · 2 lines
H. Peter Anvin, Intel Open Source Technology Center I work for Intel. I don't speak on their behalf.
PATCH 26/35 x86: add find_fw_memmap_area
In reply to Yinghai Luso could move early_res up
--- arch/x86/include/asm/early_res.h | 1 + arch/x86/kernel/e820.c | 4 ++++ arch/x86/kernel/early_res.c | 17 +++++++++++------ 3 files changed, 16 insertions(+), 6 deletions(-)
arch/x86/include/asm/early_res.h +1 -0
@@ -12,6 +12,7 @@ u64 find_early_area(u64 ei_start, u64 ei_last, u64 start, u64 end, u64 size, u64 align);u64 find_early_area_size (u64 ei_start,u64 ei_last,u64 start,u64 *sizep,u64 align); +u64 find_fw_memmap_area (u64 start,u64 end,u64 size,u64 align);#include <linux/range.h> int get_free_all_memory_range (struct range **rangep,int nodeid);
arch/x86/kernel/e820.c +4 -0
@@ -748,6 +748,10 @@ u64 __init find_e820_area(u64 start, u64 end, u64 size, u64 align)return -1ULL ; } +u64 __init find_fw_memmap_area (u64 start,u64 end,u64 size,u64 align) +{ +return find_e820_area (start, end, size, align); +}/* * Find next free range after *start */
arch/x86/kernel/early_res.c +11 -6
@@ -7,16 +7,14 @@#include <linux/bootmem.h> #include <linux/mm.h> -#include <asm/e820.h> #include <asm/early_res.h> -#include <asm/proto.h> /* * Early reserved memory areas. */ /* * need to make sure this one is bigger enough before -* find_e820_area could be used +* find_fw_memmap_area could be used */ #define MAX_EARLY_RES_X 32
@@ -180,6 +178,13 @@ void __init reserve_early_overlap_ok(u64 start, u64 end, char *name)__reserve_early (start, end, name,1 ); } +u64 __init __weak find_fw_memmap_area (u64 start,u64 end,u64 size,u64 align) +{ +panic ("should have find_fw_memmap_area defined with arch" ); + +return -1ULL ; +} +static void __init __check_and_double_early_res (u64 ex_start,u64 ex_end) {u64 start, end, size, mem;
@@ -198,13 +203,13 @@ static void __init __check_and_double_early_res(u64 ex_start, u64 ex_end) start = early_res[0 ].end; end = ex_start;if (start + size < end) - mem =find_e820_area (start, end, size, + mem =find_fw_memmap_area (start, end, size,sizeof (struct early_res ));if (mem ==-1ULL ) { start = ex_end; end = max_pfn_mapped <<PAGE_SHIFT ;if (start + size < end) - mem =find_e820_area (start, end, size, + mem =find_fw_memmap_area (start, end, size,sizeof (struct early_res )); }if (mem ==-1ULL )
@@ -343,7 +348,7 @@ int __init get_free_all_memory_range(struct range **rangep, int nodeid) start =MAX_DMA32_PFN <<PAGE_SHIFT ;#endif end = max_pfn_mapped <<PAGE_SHIFT ; - mem =find_e820_area (start, end, size,sizeof (struct range )); + mem =find_fw_memmap_area (start, end, size,sizeof (struct range ));if (mem ==-1ULL )panic ("can not find more space for range free" );
Signature · 1 line
1.6.4.2
PATCH 27/35 core: move early_res
In reply to Yinghai Lufrom arch/x86 to kernel/
--- arch/x86/include/asm/e820.h | 2 +- arch/x86/include/asm/early_res.h | 21 -- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/e820.c | 1 - arch/x86/kernel/early_res.c | 523 -------------------------------------- include/linux/early_res.h | 21 ++ kernel/Makefile | 2 +- kernel/early_res.c | 522 +++++++++++++++++++++++++++++++++++++ 8 files changed, 546 insertions(+), 548 deletions(-) delete mode 100644 arch/x86/include/asm/early_res.h delete mode 100644 arch/x86/kernel/early_res.c create mode 100644 include/linux/early_res.h create mode 100644 kernel/early_res.c
arch/x86/include/asm/e820.h +1 -1
@@ -112,7 +112,7 @@ extern unsigned long end_user_pfn;extern u64 find_e820_area (u64 start,u64 end,u64 size,u64 align);extern u64 find_e820_area_size (u64 start,u64 *sizep,u64 align);extern u64 early_reserve_e820 (u64 startt,u64 sizet,u64 align); -#include <asm/early_res.h> +#include <linux/early_res.h> extern unsigned long e820_end_of_ram_pfn (void );extern unsigned long e820_end_of_low_ram_pfn (void );
arch/x86/include/asm/early_res.h deleted +0 -21
@@ -1,21 +0,0 @@ -#ifndef _ASM_X86_EARLY_RES_H -#define _ASM_X86_EARLY_RES_H -#ifdef __KERNEL__ - -extern void reserve_early (u64 start,u64 end,char *name); -extern void reserve_early_overlap_ok (u64 start,u64 end,char *name); -extern void free_early (u64 start,u64 end); -extern void early_res_to_bootmem (u64 start,u64 end); - -void reserve_early_without_check (u64 start,u64 end,char *name); -u64 find_early_area (u64 ei_start,u64 ei_last,u64 start,u64 end, -u64 size,u64 align); -u64 find_early_area_size (u64 ei_start,u64 ei_last,u64 start, -u64 *sizep,u64 align); -u64 find_fw_memmap_area (u64 start,u64 end,u64 size,u64 align); -#include <linux/range.h> -int get_free_all_memory_range (struct range **rangep,int nodeid); - -#endif /* __KERNEL__ */ - -#endif /* _ASM_X86_EARLY_RES_H */
arch/x86/kernel/Makefile +1 -1
@@ -38,7 +38,7 @@ obj-$(CONFIG_X86_32) += probe_roms_32.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o -obj-y += bootflag.o e820.o early_res.o +obj-y += bootflag.o e820.o obj-y += pci-dma.o quirks.o i8237.o topology.o kdebugfs.o obj-y += alternative.o i8253.o pci-nommu.o hw_breakpoint.o obj-y += tsc.o io_delay.o rtc.o
arch/x86/kernel/e820.c +0 -1
@@ -17,7 +17,6 @@#include <linux/firmware-map.h> #include <asm/e820.h> -#include <asm/early_res.h> #include <asm/proto.h> #include <asm/setup.h>
arch/x86/kernel/early_res.c deleted +0 -523
523 lines not on this page · raw message
include/linux/early_res.h new file +21 -0
@@ -0,0 +1,21 @@ +#ifndef _LINUX_EARLY_RES_H +#define _LINUX_EARLY_RES_H +#ifdef __KERNEL__ + +extern void reserve_early (u64 start,u64 end,char *name); +extern void reserve_early_overlap_ok (u64 start,u64 end,char *name); +extern void free_early (u64 start,u64 end); +extern void early_res_to_bootmem (u64 start,u64 end); + +void reserve_early_without_check (u64 start,u64 end,char *name); +u64 find_early_area (u64 ei_start,u64 ei_last,u64 start,u64 end, +u64 size,u64 align); +u64 find_early_area_size (u64 ei_start,u64 ei_last,u64 start, +u64 *sizep,u64 align); +u64 find_fw_memmap_area (u64 start,u64 end,u64 size,u64 align); +#include <linux/range.h> +int get_free_all_memory_range (struct range **rangep,int nodeid); + +#endif /* __KERNEL__ */ + +#endif /* _LINUX_EARLY_RES_H */
kernel/Makefile +1 -1
@@ -10,7 +10,7 @@ obj-y = sched.o fork.o exec_domain.o panic.o printk.o \ kthread.o wait.o kfifo.o sys_ni.o posix-cpu-timers.o mutex.o \ hrtimer.o rwsem.o nsproxy.o srcu.o semaphore.o \ notifier.o ksysfs.o pm_qos_params.o sched_clock.o cred.o \ - async.o range.o + async.o range.o early_res.o obj-y += groups.o ifdef CONFIG_FUNCTION_TRACER
kernel/early_res.c new file +522 -0
522 lines not on this page · raw message
Signature · 1 line
1.6.4.2
Re: [PATCH 27/35] core: move early_res
Hi,
Quoted 4 lines · On Wed, 10 Feb 2010 01:20:31 -0800 Yinghai Lu <[email protected]> wrote:
from
arch/x86tokernel/Signed-off-by Yinghai Lu <[email protected]>
Quoted 14 lines
--- arch/x86/include/asm/e820.h | 2 +- arch/x86/include/asm/early_res.h | 21 -- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/e820.c | 1 - arch/x86/kernel/early_res.c | 523 -------------------------------------- include/linux/early_res.h | 21 ++ kernel/Makefile | 2 +- kernel/early_res.c | 522 +++++++++++++++++++++++++++++++++++++ 8 files changed, 546 insertions(+), 548 deletions(-) delete mode 100644 arch/x86/include/asm/early_res.h delete mode 100644 arch/x86/kernel/early_res.c create mode 100644 include/linux/early_res.h create mode 100644 kernel/early_res.c
From a powerpc pseries_defconfig build (and other configs) of tip/master (9d4a5dc3080c811f36bf8175f2de1f9a6f84b176 "Merge branch 'perf/urgent'"):
kernel/early_res.c:209: error: 'max_pfn_mapped' undeclared (first use in this function)
max_pfn_mapped is only defined for x86.
Signature · 3 lines
Cheers, Stephen Rothwell [email protected] http://www.canb.auug.org.au/~sfr/
Re: [PATCH 27/35] core: move early_res
Quoted 22 lines · Stephen Rothwell
Hi,
Quoted 4 lines · On Wed, 10 Feb 2010 01:20:31 -0800 Yinghai Lu <[email protected]> wrote:
from
arch/x86tokernel/Signed-off-by Yinghai Lu <[email protected]>Quoted 14 lines
--- arch/x86/include/asm/e820.h | 2 +- arch/x86/include/asm/early_res.h | 21 -- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/e820.c | 1 - arch/x86/kernel/early_res.c | 523 -------------------------------------- include/linux/early_res.h | 21 ++ kernel/Makefile | 2 +- kernel/early_res.c | 522 +++++++++++++++++++++++++++++++++++++ 8 files changed, 546 insertions(+), 548 deletions(-) delete mode 100644 arch/x86/include/asm/early_res.h delete mode 100644 arch/x86/kernel/early_res.c create mode 100644 include/linux/early_res.h create mode 100644 kernel/early_res.c
Quoted 6 lines
From a powerpc
pseries_defconfigbuild (and other configs) of tip/master (9d4a5dc3080c811f36bf8175f2de1f9a6f84b176"Merge branch 'perf/urgent'"):
kernel/early_res.c:209: error: 'max_pfn_mapped' undeclared (first use in this function)
max_pfn_mappedis only defined for x86.
FYI, i already found this and reported it to Yinghai earlier today.
Btw.,are you doing these cross-build tests yourself, or are you relaying the kisskb automation notifications?
Thanks,
Ingo
Re: [PATCH 27/35] core: move early_res
Hi Ingo,
Quoted 2 lines · On Sun, 14 Feb 2010 18:08:58 +0100 Ingo Molnar <[email protected]> wrote:
FYI, i already found this and reported it to Yinghai earlier today.
Great, thanks.
Quoted 2 lines
Btw.,are you doing these cross-build tests yourself, or are you relaying the kisskb automation notifications?
Mostly they are from the kisskb builds. Did Michael get the automatic notification stuff to work (he is on leave so I can't ask him)? If so, I will stop reporting these except when I get them myself.
Thanks for all the work.
Signature · 3 lines
Cheers, Stephen Rothwell [email protected] http://www.canb.auug.org.au/~sfr/
Re: [PATCH 27/35] core: move early_res
Quoted 4 lines · Stephen Rothwell
Quoted 2 lines
Btw.,are you doing these cross-build tests yourself, or are you relaying the kisskb automation notifications?
Mostly they are from the kisskb builds. [...]
Note that in most cases i find them earlier than the kisskb scripts, and i handle those in any case, so generally there's no need for you to re-report them - unless you see any such bug slip into linux-next (which you shouldnt) or if you rely on -tip for real PowerPC testing (which you dont AFAIK).
Thanks,
Ingo
Re: [PATCH 27/35] core: move early_res
In reply to Stephen RothwellQuoted 22 lines · Stephen Rothwell
Hi,
Quoted 4 lines · On Wed, 10 Feb 2010 01:20:31 -0800 Yinghai Lu <[email protected]> wrote:
from
arch/x86tokernel/Signed-off-by Yinghai Lu <[email protected]>Quoted 14 lines
--- arch/x86/include/asm/e820.h | 2 +- arch/x86/include/asm/early_res.h | 21 -- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/e820.c | 1 - arch/x86/kernel/early_res.c | 523 -------------------------------------- include/linux/early_res.h | 21 ++ kernel/Makefile | 2 +- kernel/early_res.c | 522 +++++++++++++++++++++++++++++++++++++ 8 files changed, 546 insertions(+), 548 deletions(-) delete mode 100644 arch/x86/include/asm/early_res.h delete mode 100644 arch/x86/kernel/early_res.c create mode 100644 include/linux/early_res.h create mode 100644 kernel/early_res.c
Quoted 7 lines
From a powerpc
pseries_defconfigbuild (and other configs) of tip/master (9d4a5dc3080c811f36bf8175f2de1f9a6f84b176"Merge branch 'perf/urgent'"):
kernel/early_res.c:209: error: 'max_pfn_mapped' undeclared (first use in this function)
max_pfn_mappedis only defined for x86.
please check
Subject: [PATCH -v2] x86: fix cross-arch compiling
Ingo found:
lots of cross-arch build failures in latest -tip:
/home/mingo/tip/kernel/early_res.c: In function '__check_and_double_early_res':/home/mingo/tip/kernel/early_res.c:209: error: 'max_pfn_mapped' undeclared (first use in this function) /home/mingo/tip/kernel/early_res.c:209: error: (Each undeclared identifier is reported only once /home/mingo/tip/kernel/early_res.c:209: error: for each function it appears in.) make[2]: *** [kernel/early_res.o] Error 1
max_pfn_mapped only defined in x86...
so add get_max_mapped function...
-v2: use that in get_free_all_memory_range() too
--- arch/x86/kernel/e820.c | 9 +++++++++ include/linux/early_res.h | 1 + kernel/early_res.c | 13 ++++++++++--- 3 files changed, 20 insertions(+), 3 deletions(-)
arch/x86/kernel/e820.c +9 -0
@@ -752,6 +752,15 @@ u64 __init find_fw_memmap_area(u64 start {return find_e820_area (start, end, size, align); } + +u64 __init get_max_mapped (void ) +{ +u64 end = max_pfn_mapped; + + end <<=PAGE_SHIFT ; + +return end; +}/* * Find next free range after *start */
include/linux/early_res.h +1 -0
@@ -13,6 +13,7 @@ u64 find_early_area(u64 ei_start, u64 eiu64 find_early_area_size (u64 ei_start,u64 ei_last,u64 start,u64 *sizep,u64 align);u64 find_fw_memmap_area (u64 start,u64 end,u64 size,u64 align); +u64 get_max_mapped (void );#include <linux/range.h> int get_free_all_memory_range (struct range **rangep,int nodeid);
kernel/early_res.c +10 -3
@@ -184,6 +184,13 @@ u64 __init __weak find_fw_memmap_area(u6return -1ULL ; } +u64 __init __weak get_max_mapped (void ) +{ +panic ("should have get_max_mapped defined with arch" ); + +return -1ULL ; +} +static void __init __check_and_double_early_res (u64 ex_start,u64 ex_end) {u64 start, end, size, mem;
@@ -206,7 +213,7 @@ static void __init __check_and_double_ea sizeof(struct early_res));if (mem ==-1ULL ) { start = ex_end; - end = max_pfn_mapped <<PAGE_SHIFT ; + end =get_max_mapped ();if (start + size < end) mem =find_fw_memmap_area (start, end, size,sizeof (struct early_res ));
@@ -342,11 +349,11 @@ int __init get_free_all_memory_range(str count *=2 ; size =sizeof (struct range ) * count; + end =get_max_mapped ();#ifdef MAX_DMA32_PFN -if (max_pfn_mapped >MAX_DMA32_PFN ) +if (end > (MAX_DMA32_PFN <<PAGE_SHIFT )) start =MAX_DMA32_PFN <<PAGE_SHIFT ;#endif - end = max_pfn_mapped <<PAGE_SHIFT ; mem =find_fw_memmap_area (start, end, size,sizeof (struct range ));if (mem ==-1ULL )panic ("can not find more space for range free" );
H. Peter Anvin
reviewerRe: [PATCH 27/35] core: move early_res
Quoted 9 lines · Yinghai Lu
please check
Subject: [PATCH -v2] x86: fix cross-arch compiling
Ingo found:
lots of cross-arch build failures in latest -tip:
kernel/early_res.c u64 __init __weak find_fw_memmap_area(u6 · line 193
Quoted 7 lines
kernel/early_res.c +7
-0+u64 __init __weak get_max_mapped (void ) +{ +panic ("should have get_max_mapped defined with arch" ); + +return -1ULL ; +} +
All this does would seem is it would change a build failure into a runtime panic. I really fail to see how this is an improvement...
-hpa
Re: [PATCH 27/35] core: move early_res
Quoted 10 lines · H. Peter Anvin
Quoted 9 lines · Yinghai Lu
please check
Subject: [PATCH -v2] x86: fix cross-arch compiling
Ingo found:
lots of cross-arch build failures in latest -tip:
Quoted 10 lines
kernel/early_res.c u64 __init __weak find_fw_memmap_area(u6 · line 193
Quoted 7 lines
kernel/early_res.c +7
-0+u64 __init __weak get_max_mapped (void ) +{ +panic ("should have get_max_mapped defined with arch" ); + +return -1ULL ; +} +All this does would seem is it would change a build failure into a runtime panic. I really fail to see how this is an improvement...
current only x86 support to early_res replace bootmem.
later if other arch is using that feature, it need to provide that get_max_mapped.
Yinghai
H. Peter Anvin
reviewerRe: [PATCH 27/35] core: move early_res
Quoted 8 lines · Yinghai Lu
Quoted 3 lines
All this does would seem is it would change a build failure into a runtime panic. I really fail to see how this is an improvement...
current only x86 support to
early_resreplace bootmem.later if other arch is using that feature, it need to provide that
get_max_mapped.
If so, it would be better if this code isn't compiled at all on platforms that doesn't use it. Masking a compile-time failure with a runtime failure when the code isn't actually used doesn't seem like the right thing.
-hpa
Re: [PATCH 27/35] core: move early_res
Quoted 7 lines · H. Peter Anvin
Quoted 6 lines · Yinghai Lu
Quoted 3 lines
All this does would seem is it would change a build failure into a runtime panic. I really fail to see how this is an improvement...
current only x86 support to
early_resreplace bootmem.
Quoted 7 lines
Quoted 2 lines
later if other arch is using that feature, it need to provide that
get_max_mapped.If so, it would be better if this code isn't compiled at all on platforms that doesn't use it. Masking a compile-time failure with a runtime failure when the code isn't actually used doesn't seem like the right thing.
I would like to.
but for x86, with CONFIG_NO_BOOTMEM set or not, early_res are all used.
so we add CONFIG_HAVE_EARLY_RES ?
Yinghai
H. Peter Anvin
reviewerRe: [PATCH 27/35] core: move early_res
Quoted 7 lines · Yinghai Lu
I would like to.
but for x86, with
CONFIG_NO_BOOTMEMset or not,early_resare all used.so we add
CONFIG_HAVE_EARLY_RES?
Presumably, and force it true on x86.
-hpa
Re: [PATCH 27/35] core: move early_res
Quoted 11 lines · H. Peter Anvin
Quoted 7 lines · Yinghai Lu
I would like to.
but for x86, with
CONFIG_NO_BOOTMEMset or not,early_resare all used.so we add
CONFIG_HAVE_EARLY_RES?Presumably, and force it true on x86.
please use this one to replace the one in tip/x86/bootmem
Thanks
Yinghai
Subject: [PATCH -v3 27/25] core: move early_res
from arch/x86 to kernel/
-v2: add get_max_mapped, max_pfn_mapped only defined in x86...
to fix PPC compiling
-v3: according to hpa, add CONFIG_HAVE_EARLY_RES
--- arch/x86/Kconfig | 3 arch/x86/include/asm/e820.h | 2 arch/x86/include/asm/early_res.h | 21 - arch/x86/kernel/Makefile | 2 arch/x86/kernel/e820.c | 10 arch/x86/kernel/early_res.c | 523 --------------------------------------- include/linux/early_res.h | 22 + kernel/Makefile | 1 kernel/early_res.c | 515 ++++++++++++++++++++++++++++++++++++++ 9 files changed, 552 insertions(+), 547 deletions(-)
arch/x86/include/asm/e820.h +1 -1
@@ -112,7 +112,7 @@ extern unsigned long end_user_pfn;extern u64 find_e820_area (u64 start,u64 end,u64 size,u64 align);extern u64 find_e820_area_size (u64 start,u64 *sizep,u64 align);extern u64 early_reserve_e820 (u64 startt,u64 sizet,u64 align); -#include <asm/early_res.h> +#include <linux/early_res.h> extern unsigned long e820_end_of_ram_pfn (void );extern unsigned long e820_end_of_low_ram_pfn (void );
arch/x86/include/asm/early_res.h deleted +0 -21
@@ -1,21 +0,0 @@ -#ifndef _ASM_X86_EARLY_RES_H -#define _ASM_X86_EARLY_RES_H -#ifdef __KERNEL__ - -extern void reserve_early (u64 start,u64 end,char *name); -extern void reserve_early_overlap_ok (u64 start,u64 end,char *name); -extern void free_early (u64 start,u64 end); -extern void early_res_to_bootmem (u64 start,u64 end); - -void reserve_early_without_check (u64 start,u64 end,char *name); -u64 find_early_area (u64 ei_start,u64 ei_last,u64 start,u64 end, -u64 size,u64 align); -u64 find_early_area_size (u64 ei_start,u64 ei_last,u64 start, -u64 *sizep,u64 align); -u64 find_fw_memmap_area (u64 start,u64 end,u64 size,u64 align); -#include <linux/range.h> -int get_free_all_memory_range (struct range **rangep,int nodeid); - -#endif /* __KERNEL__ */ - -#endif /* _ASM_X86_EARLY_RES_H */
arch/x86/kernel/Makefile +1 -1
@@ -38,7 +38,7 @@ obj-$(CONFIG_X86_32) += probe_roms_32.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o -obj-y += bootflag.o e820.o early_res.o +obj-y += bootflag.o e820.o obj-y += pci-dma.o quirks.o i8237.o topology.o kdebugfs.o obj-y += alternative.o i8253.o pci-nommu.o hw_breakpoint.o obj-y += tsc.o io_delay.o rtc.o
arch/x86/kernel/e820.c +9 -1
@@ -17,7 +17,6 @@#include <linux/firmware-map.h> #include <asm/e820.h> -#include <asm/early_res.h> #include <asm/proto.h> #include <asm/setup.h>
@@ -752,6 +751,15 @@ u64 __init find_fw_memmap_area(u64 start {return find_e820_area (start, end, size, align); } + +u64 __init get_max_mapped (void ) +{ +u64 end = max_pfn_mapped; + + end <<=PAGE_SHIFT ; + +return end; +}/* * Find next free range after *start */
arch/x86/kernel/early_res.c deleted +0 -523
523 lines not on this page · raw message
include/linux/early_res.h new file +22 -0
@@ -0,0 +1,22 @@ +#ifndef _LINUX_EARLY_RES_H +#define _LINUX_EARLY_RES_H +#ifdef __KERNEL__ + +extern void reserve_early (u64 start,u64 end,char *name); +extern void reserve_early_overlap_ok (u64 start,u64 end,char *name); +extern void free_early (u64 start,u64 end); +extern void early_res_to_bootmem (u64 start,u64 end); + +void reserve_early_without_check (u64 start,u64 end,char *name); +u64 find_early_area (u64 ei_start,u64 ei_last,u64 start,u64 end, +u64 size,u64 align); +u64 find_early_area_size (u64 ei_start,u64 ei_last,u64 start, +u64 *sizep,u64 align); +u64 find_fw_memmap_area (u64 start,u64 end,u64 size,u64 align); +u64 get_max_mapped (void ); +#include <linux/range.h> +int get_free_all_memory_range (struct range **rangep,int nodeid); + +#endif /* __KERNEL__ */ + +#endif /* _LINUX_EARLY_RES_H */
kernel/Makefile +1 -0
@@ -11,6 +11,7 @@ obj-y = sched.o fork.o exec_domain.o hrtimer.o rwsem.o nsproxy.o srcu.o semaphore.o \ notifier.o ksysfs.o pm_qos_params.o sched_clock.o cred.o \ async.o range.o +obj-$(CONFIG_HAVE_EARLY_RES) += early_res.o obj-y += groups.o ifdef CONFIG_FUNCTION_TRACER
kernel/early_res.c new file +515 -0
515 lines not on this page · raw message
arch/x86/Kconfig +3 -0
@@ -184,6 +184,9 @@ config ARCH_SUPPORTS_OPTIMIZED_INLINING config ARCH_SUPPORTS_DEBUG_PAGEALLOC def_bool y +config HAVE_EALRY_RES + def_bool y + config HAVE_INTEL_TXT def_bool y depends on EXPERIMENTAL && DMAR && ACPI
Re: [PATCH 27/35] core: move early_res
Quoted 7 lines · Yinghai Lu
Quoted 6 lines · H. Peter Anvin
Quoted 5 lines · Yinghai Lu
I would like to.
but for x86, with
CONFIG_NO_BOOTMEMset or not,early_resare all used.
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
so we add
CONFIG_HAVE_EARLY_RES?Presumably, and force it true on x86.
please use this one to replace the one in tip/x86/bootmem
sorry, please use this one instead.
Subject: [PATCH -v4 27/35] core: move early_res
from arch/x86 to kernel/
-v2: add get_max_mapped, max_pfn_mapped only defined in x86...
to fix PPC compiling
-v3: according to hpa, add CONFIG_HAVE_EARLY_RES -v4: fix typo about EALRY_RES in config
--- arch/x86/Kconfig | 3 arch/x86/include/asm/e820.h | 2 arch/x86/include/asm/early_res.h | 21 - arch/x86/kernel/Makefile | 2 arch/x86/kernel/e820.c | 10 arch/x86/kernel/early_res.c | 523 --------------------------------------- include/linux/early_res.h | 22 + kernel/Makefile | 1 kernel/early_res.c | 515 ++++++++++++++++++++++++++++++++++++++ 9 files changed, 552 insertions(+), 547 deletions(-)
arch/x86/include/asm/e820.h +1 -1
@@ -112,7 +112,7 @@ extern unsigned long end_user_pfn;extern u64 find_e820_area (u64 start,u64 end,u64 size,u64 align);extern u64 find_e820_area_size (u64 start,u64 *sizep,u64 align);extern u64 early_reserve_e820 (u64 startt,u64 sizet,u64 align); -#include <asm/early_res.h> +#include <linux/early_res.h> extern unsigned long e820_end_of_ram_pfn (void );extern unsigned long e820_end_of_low_ram_pfn (void );
arch/x86/include/asm/early_res.h deleted +0 -21
@@ -1,21 +0,0 @@ -#ifndef _ASM_X86_EARLY_RES_H -#define _ASM_X86_EARLY_RES_H -#ifdef __KERNEL__ - -extern void reserve_early (u64 start,u64 end,char *name); -extern void reserve_early_overlap_ok (u64 start,u64 end,char *name); -extern void free_early (u64 start,u64 end); -extern void early_res_to_bootmem (u64 start,u64 end); - -void reserve_early_without_check (u64 start,u64 end,char *name); -u64 find_early_area (u64 ei_start,u64 ei_last,u64 start,u64 end, -u64 size,u64 align); -u64 find_early_area_size (u64 ei_start,u64 ei_last,u64 start, -u64 *sizep,u64 align); -u64 find_fw_memmap_area (u64 start,u64 end,u64 size,u64 align); -#include <linux/range.h> -int get_free_all_memory_range (struct range **rangep,int nodeid); - -#endif /* __KERNEL__ */ - -#endif /* _ASM_X86_EARLY_RES_H */
arch/x86/kernel/Makefile +1 -1
@@ -38,7 +38,7 @@ obj-$(CONFIG_X86_32) += probe_roms_32.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o -obj-y += bootflag.o e820.o early_res.o +obj-y += bootflag.o e820.o obj-y += pci-dma.o quirks.o i8237.o topology.o kdebugfs.o obj-y += alternative.o i8253.o pci-nommu.o hw_breakpoint.o obj-y += tsc.o io_delay.o rtc.o
arch/x86/kernel/e820.c +9 -1
@@ -17,7 +17,6 @@#include <linux/firmware-map.h> #include <asm/e820.h> -#include <asm/early_res.h> #include <asm/proto.h> #include <asm/setup.h>
@@ -752,6 +751,15 @@ u64 __init find_fw_memmap_area(u64 start {return find_e820_area (start, end, size, align); } + +u64 __init get_max_mapped (void ) +{ +u64 end = max_pfn_mapped; + + end <<=PAGE_SHIFT ; + +return end; +}/* * Find next free range after *start */
arch/x86/kernel/early_res.c deleted +0 -523
523 lines not on this page · raw message
include/linux/early_res.h new file +22 -0
@@ -0,0 +1,22 @@ +#ifndef _LINUX_EARLY_RES_H +#define _LINUX_EARLY_RES_H +#ifdef __KERNEL__ + +extern void reserve_early (u64 start,u64 end,char *name); +extern void reserve_early_overlap_ok (u64 start,u64 end,char *name); +extern void free_early (u64 start,u64 end); +extern void early_res_to_bootmem (u64 start,u64 end); + +void reserve_early_without_check (u64 start,u64 end,char *name); +u64 find_early_area (u64 ei_start,u64 ei_last,u64 start,u64 end, +u64 size,u64 align); +u64 find_early_area_size (u64 ei_start,u64 ei_last,u64 start, +u64 *sizep,u64 align); +u64 find_fw_memmap_area (u64 start,u64 end,u64 size,u64 align); +u64 get_max_mapped (void ); +#include <linux/range.h> +int get_free_all_memory_range (struct range **rangep,int nodeid); + +#endif /* __KERNEL__ */ + +#endif /* _LINUX_EARLY_RES_H */
kernel/Makefile +1 -0
@@ -11,6 +11,7 @@ obj-y = sched.o fork.o exec_domain.o hrtimer.o rwsem.o nsproxy.o srcu.o semaphore.o \ notifier.o ksysfs.o pm_qos_params.o sched_clock.o cred.o \ async.o range.o +obj-$(CONFIG_HAVE_EARLY_RES) += early_res.o obj-y += groups.o ifdef CONFIG_FUNCTION_TRACER
kernel/early_res.c new file +515 -0
515 lines not on this page · raw message
arch/x86/Kconfig +3 -0
@@ -184,6 +184,9 @@ config ARCH_SUPPORTS_OPTIMIZED_INLINING config ARCH_SUPPORTS_DEBUG_PAGEALLOC def_bool y +config HAVE_EARLY_RES + def_bool y + config HAVE_INTEL_TXT def_bool y depends on EXPERIMENTAL && DMAR && ACPI
PATCH 28/35 irq: remove not need bootmem code
In reply to Yinghai Lumem_init is moved early already.
--- kernel/irq/handle.c | 14 +++----------- 1 files changed, 3 insertions(+), 11 deletions(-)
kernel/irq/handle.c +3 -11
@@ -19,7 +19,6 @@#include <linux/kernel_stat.h> #include <linux/rculist.h> #include <linux/hash.h> -#include <linux/bootmem.h> #include <trace/events/irq.h> #include "internals.h"
@@ -87,12 +86,8 @@ void __ref init_kstat_irqs(struct irq_desc *desc, int node, int nr) {void *ptr; -if (slab_is_available ()) - ptr =kzalloc_node (nr *sizeof (*desc->kstat_irqs), -GFP_ATOMIC , node); -else - ptr =alloc_bootmem_node (NODE_DATA (node), - nr *sizeof (*desc->kstat_irqs)); + ptr =kzalloc_node (nr *sizeof (*desc->kstat_irqs), +GFP_ATOMIC , node);/* * don't overwite if can not get new one
@@ -219,10 +214,7 @@ struct irq_desc * __ref irq_to_desc_alloc_node(unsigned int irq, int node)if (desc) goto out_unlock; -if (slab_is_available ()) - desc =kzalloc_node (sizeof (*desc),GFP_ATOMIC , node); -else - desc =alloc_bootmem_node (NODE_DATA (node),sizeof (*desc)); + desc =kzalloc_node (sizeof (*desc),GFP_ATOMIC , node);printk (KERN_DEBUG " alloc irq_desc for %d on node %d\n" , irq, node);if (!desc) {
Signature · 1 line
1.6.4.2
[tip:x86/irq] irq: Remove unnecessary bootmem code
Commit-ID: febcb0c59ac19fef2081a30e371e7af3619b5e91 Gitweb: http://git.kernel.org/tip/febcb0c59ac19fef2081a30e371e7af3619b5e91 Author: Yinghai Lu <[email protected]> AuthorDate: Wed, 10 Feb 2010 01:20:32 -0800 Committer: H. Peter Anvin <[email protected]> CommitDate: Wed, 17 Feb 2010 17:23:59 -0800
irq: Remove unnecessary bootmem code
mem_init is moved early already.
LKML-Reference: <[email protected]>
--- kernel/irq/handle.c | 14 +++----------- 1 files changed, 3 insertions(+), 11 deletions(-)
kernel/irq/handle.c +3 -11
@@ -19,7 +19,6 @@#include <linux/kernel_stat.h> #include <linux/rculist.h> #include <linux/hash.h> -#include <linux/bootmem.h> #include <trace/events/irq.h> #include "internals.h"
@@ -87,12 +86,8 @@ void __ref init_kstat_irqs(struct irq_desc *desc, int node, int nr) {void *ptr; -if (slab_is_available ()) - ptr =kzalloc_node (nr *sizeof (*desc->kstat_irqs), -GFP_ATOMIC , node); -else - ptr =alloc_bootmem_node (NODE_DATA (node), - nr *sizeof (*desc->kstat_irqs)); + ptr =kzalloc_node (nr *sizeof (*desc->kstat_irqs), +GFP_ATOMIC , node);/* * don't overwite if can not get new one
@@ -219,10 +214,7 @@ struct irq_desc * __ref irq_to_desc_alloc_node(unsigned int irq, int node)if (desc) goto out_unlock; -if (slab_is_available ()) - desc =kzalloc_node (sizeof (*desc),GFP_ATOMIC , node); -else - desc =alloc_bootmem_node (NODE_DATA (node),sizeof (*desc)); + desc =kzalloc_node (sizeof (*desc),GFP_ATOMIC , node);printk (KERN_DEBUG " alloc irq_desc for %d on node %d\n" , irq, node);if (!desc) {
PATCH 29/35 radix: move radix init early
In reply to Yinghai Luprepare to use it in early_irq_init()
--- init/main.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
init/main.c +1 -1
@@ -584,6 +584,7 @@ asmlinkage void __init start_kernel(void)local_irq_disable (); }rcu_init (); +radix_tree_init ();/* init some links before init_ISA_irqs() */ early_irq_init ();init_IRQ ();
@@ -657,7 +658,6 @@ asmlinkage void __init start_kernel(void)proc_caches_init ();buffer_init ();key_init (); -radix_tree_init ();security_init ();vfs_caches_init (totalram_pages);signals_init ();
Signature · 1 line
1.6.4.2
[tip:x86/irq] init: Move radix_tree_init() early
Commit-ID: 773e3eb7b81e5ba13b5155dfb3bb75b8ce37f8f9 Gitweb: http://git.kernel.org/tip/773e3eb7b81e5ba13b5155dfb3bb75b8ce37f8f9 Author: Yinghai Lu <[email protected]> AuthorDate: Wed, 10 Feb 2010 01:20:33 -0800 Committer: H. Peter Anvin <[email protected]> CommitDate: Wed, 17 Feb 2010 17:26:33 -0800
init: Move radix_tree_init() early
Prepare for using radix trees in early_irq_init().
LKML-Reference: <[email protected]>
--- init/main.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
init/main.c +1 -1
@@ -584,6 +584,7 @@ asmlinkage void __init start_kernel(void)local_irq_disable (); }rcu_init (); +radix_tree_init ();/* init some links before init_ISA_irqs() */ early_irq_init ();init_IRQ ();
@@ -657,7 +658,6 @@ asmlinkage void __init start_kernel(void)proc_caches_init ();buffer_init ();key_init (); -radix_tree_init ();security_init ();vfs_caches_init (totalram_pages);signals_init ();
PATCH 30/35 sparseirq: change irq_desc_ptrs to static
In reply to Yinghai Luadd replace_irq_desc()
-v2: remove unneeded boundary check in replace_irq_desc
--- kernel/irq/handle.c | 7 ++++++- kernel/irq/internals.h | 6 +----- kernel/irq/numa_migrate.c | 4 ++-- 3 files changed, 9 insertions(+), 8 deletions(-)
kernel/irq/handle.c +6 -1
@@ -127,7 +127,7 @@ static void init_one_irq_desc(int irq, struct irq_desc *desc, int node)*/ DEFINE_RAW_SPINLOCK (sparse_irq_lock); -struct irq_desc **irq_desc_ptrs__read_mostly ; +static struct irq_desc **irq_desc_ptrs__read_mostly ; static struct irq_desc irq_desc_legacy[NR_IRQS_LEGACY] __cacheline_aligned_in_smp = { [0 ...NR_IRQS_LEGACY -1 ] = {
@@ -192,6 +192,11 @@ struct irq_desc *irq_to_desc(unsigned int irq)return NULL ; } +void replace_irq_desc (unsigned int irq,struct irq_desc *desc) +{ + irq_desc_ptrs[irq] = desc; +} +struct irq_desc *__ref irq_to_desc_alloc_node (unsigned int irq,int node) {struct irq_desc *desc;
kernel/irq/internals.h +1 -5
@@ -21,11 +21,7 @@ extern void clear_kstat_irqs(struct irq_desc *desc);extern raw_spinlock_t sparse_irq_lock;#ifdef CONFIG_SPARSE_IRQ -/* irq_desc_ptrs allocated at boot time */ -extern struct irq_desc **irq_desc_ptrs; -#else -/* irq_desc_ptrs is a fixed size array */ -extern struct irq_desc *irq_desc_ptrs[NR_IRQS ]; +void replace_irq_desc (unsigned int irq,struct irq_desc *desc);#endif #ifdef CONFIG_PROC_FS
kernel/irq/numa_migrate.c +2 -2
@@ -70,7 +70,7 @@ static struct irq_desc *__real_move_irq_desc(struct irq_desc *old_desc,raw_spin_lock_irqsave (&sparse_irq_lock, flags);/* We have to check it to avoid races with another CPU */ - desc = irq_desc_ptrs[irq]; + desc =irq_to_desc (irq);if (desc && old_desc != desc) goto out_unlock;
@@ -90,7 +90,7 @@ static struct irq_desc *__real_move_irq_desc(struct irq_desc *old_desc, goto out_unlock; } - irq_desc_ptrs[irq] = desc; +replace_irq_desc (irq, desc);raw_spin_unlock_irqrestore (&sparse_irq_lock, flags);/* free the old one */
Signature · 1 line
1.6.4.2
[tip:x86/irq] sparseirq: Change irq_desc_ptrs to static
Commit-ID: 99558f0bbe68cb09799ec38adbaa3f3b2dc7ba63 Gitweb: http://git.kernel.org/tip/99558f0bbe68cb09799ec38adbaa3f3b2dc7ba63 Author: Yinghai Lu <[email protected]> AuthorDate: Wed, 10 Feb 2010 01:20:34 -0800 Committer: H. Peter Anvin <[email protected]> CommitDate: Wed, 17 Feb 2010 17:27:03 -0800
sparseirq: Change irq_desc_ptrs to static
Add replace_irq_desc() instead of poking at the array directly.
-v2: remove unneeded boundary check in replace_irq_desc
LKML-Reference: <[email protected]>
--- kernel/irq/handle.c | 7 ++++++- kernel/irq/internals.h | 6 +----- kernel/irq/numa_migrate.c | 4 ++-- 3 files changed, 9 insertions(+), 8 deletions(-)
kernel/irq/handle.c +6 -1
@@ -127,7 +127,7 @@ static void init_one_irq_desc(int irq, struct irq_desc *desc, int node)*/ DEFINE_RAW_SPINLOCK (sparse_irq_lock); -struct irq_desc **irq_desc_ptrs__read_mostly ; +static struct irq_desc **irq_desc_ptrs__read_mostly ; static struct irq_desc irq_desc_legacy[NR_IRQS_LEGACY] __cacheline_aligned_in_smp = { [0 ...NR_IRQS_LEGACY -1 ] = {
@@ -192,6 +192,11 @@ struct irq_desc *irq_to_desc(unsigned int irq)return NULL ; } +void replace_irq_desc (unsigned int irq,struct irq_desc *desc) +{ + irq_desc_ptrs[irq] = desc; +} +struct irq_desc *__ref irq_to_desc_alloc_node (unsigned int irq,int node) {struct irq_desc *desc;
kernel/irq/internals.h +1 -5
@@ -21,11 +21,7 @@ extern void clear_kstat_irqs(struct irq_desc *desc);extern raw_spinlock_t sparse_irq_lock;#ifdef CONFIG_SPARSE_IRQ -/* irq_desc_ptrs allocated at boot time */ -extern struct irq_desc **irq_desc_ptrs; -#else -/* irq_desc_ptrs is a fixed size array */ -extern struct irq_desc *irq_desc_ptrs[NR_IRQS ]; +void replace_irq_desc (unsigned int irq,struct irq_desc *desc);#endif #ifdef CONFIG_PROC_FS
kernel/irq/numa_migrate.c +2 -2
@@ -70,7 +70,7 @@ static struct irq_desc *__real_move_irq_desc(struct irq_desc *old_desc,raw_spin_lock_irqsave (&sparse_irq_lock, flags);/* We have to check it to avoid races with another CPU */ - desc = irq_desc_ptrs[irq]; + desc =irq_to_desc (irq);if (desc && old_desc != desc) goto out_unlock;
@@ -90,7 +90,7 @@ static struct irq_desc *__real_move_irq_desc(struct irq_desc *old_desc, goto out_unlock; } - irq_desc_ptrs[irq] = desc; +replace_irq_desc (irq, desc);raw_spin_unlock_irqrestore (&sparse_irq_lock, flags);/* free the old one */
PATCH 31/35 sparseirq: use radix_tree instead of ptrs array
In reply to Yinghai Luuse radix_tree irq_desc_tree instead of irq_desc_ptrs.
-v2: according to Eric and cyrill to use radix_tree_lookup_slot and radix_tree_replace_slot
--- kernel/irq/handle.c | 49 +++++++++++++++++++++++++------------------------ 1 files changed, 25 insertions(+), 24 deletions(-)
kernel/irq/handle.c +25 -24
@@ -19,6 +19,7 @@#include <linux/kernel_stat.h> #include <linux/rculist.h> #include <linux/hash.h> +#include <linux/radix-tree.h> #include <trace/events/irq.h> #include "internals.h"
@@ -127,7 +128,26 @@ static void init_one_irq_desc(int irq, struct irq_desc *desc, int node)*/ DEFINE_RAW_SPINLOCK (sparse_irq_lock); -static struct irq_desc **irq_desc_ptrs__read_mostly ; +static RADIX_TREE(irq_desc_tree, GFP_ATOMIC); + +static void set_irq_desc (unsigned int irq,struct irq_desc *desc) +{ +radix_tree_insert (&irq_desc_tree, irq, desc); +} + +struct irq_desc *irq_to_desc (unsigned int irq) +{ +return radix_tree_lookup (&irq_desc_tree, irq); +} + +void replace_irq_desc (unsigned int irq,struct irq_desc *desc) +{ +void **ptr; + + ptr =radix_tree_lookup_slot (&irq_desc_tree, irq); +if (ptr) +radix_tree_replace_slot (ptr, desc); +} static struct irq_desc irq_desc_legacy[NR_IRQS_LEGACY] __cacheline_aligned_in_smp = { [0 ...NR_IRQS_LEGACY -1 ] = {
@@ -159,9 +179,6 @@ int __init early_irq_init(void) legacy_count =ARRAY_SIZE (irq_desc_legacy); node = first_online_node; -/* allocate irq_desc_ptrs array based on nr_irqs */ - irq_desc_ptrs =kcalloc (nr_irqs,sizeof (void *),GFP_NOWAIT ); -/* allocate based on nr_cpu_ids */ kstat_irqs_legacy =kzalloc_node (NR_IRQS_LEGACY * nr_cpu_ids *sizeof (int ),GFP_NOWAIT , node);
@@ -175,28 +192,12 @@ int __init early_irq_init(void)lockdep_set_class (&desc[i].lock, &irq_desc_lock_class);alloc_desc_masks (&desc[i], node, true);init_desc_masks (&desc[i]); - irq_desc_ptrs[i] = desc + i; +set_irq_desc (i, &desc[i]); } -for (i = legacy_count; i < nr_irqs; i++) - irq_desc_ptrs[i] =NULL ; -return arch_early_irq_init (); } -struct irq_desc *irq_to_desc (unsigned int irq) -{ -if (irq_desc_ptrs && irq < nr_irqs) -return irq_desc_ptrs[irq]; - -return NULL ; -} - -void replace_irq_desc (unsigned int irq,struct irq_desc *desc) -{ - irq_desc_ptrs[irq] = desc; -} -struct irq_desc *__ref irq_to_desc_alloc_node (unsigned int irq,int node) {struct irq_desc *desc;
@@ -208,14 +209,14 @@ struct irq_desc * __ref irq_to_desc_alloc_node(unsigned int irq, int node)return NULL ; } - desc = irq_desc_ptrs[irq]; + desc =irq_to_desc (irq);if (desc)return desc;raw_spin_lock_irqsave (&sparse_irq_lock, flags);/* We have to check it to avoid races with another CPU */ - desc = irq_desc_ptrs[irq]; + desc =irq_to_desc (irq);if (desc) goto out_unlock;
@@ -228,7 +229,7 @@ struct irq_desc * __ref irq_to_desc_alloc_node(unsigned int irq, int node) }init_one_irq_desc (irq, desc, node); - irq_desc_ptrs[irq] = desc; +set_irq_desc (irq, desc); out_unlock:raw_spin_unlock_irqrestore (&sparse_irq_lock, flags);
Signature · 1 line
1.6.4.2
[tip:x86/irq] sparseirq: Use radix_tree instead of ptrs array
Commit-ID: b5eb78f76ddfa7caf4340cf6893b032f45d8114a Gitweb: http://git.kernel.org/tip/b5eb78f76ddfa7caf4340cf6893b032f45d8114a Author: Yinghai Lu <[email protected]> AuthorDate: Wed, 10 Feb 2010 01:20:35 -0800 Committer: H. Peter Anvin <[email protected]> CommitDate: Wed, 17 Feb 2010 17:27:20 -0800
sparseirq: Use radix_tree instead of ptrs array
Use radix_tree irq_desc_tree instead of irq_desc_ptrs.
-v2: according to Eric and cyrill to use radix_tree_lookup_slot and
radix_tree_replace_slot
LKML-Reference: <[email protected]>
--- kernel/irq/handle.c | 49 +++++++++++++++++++++++++------------------------ 1 files changed, 25 insertions(+), 24 deletions(-)
kernel/irq/handle.c +25 -24
@@ -19,6 +19,7 @@#include <linux/kernel_stat.h> #include <linux/rculist.h> #include <linux/hash.h> +#include <linux/radix-tree.h> #include <trace/events/irq.h> #include "internals.h"
@@ -127,7 +128,26 @@ static void init_one_irq_desc(int irq, struct irq_desc *desc, int node)*/ DEFINE_RAW_SPINLOCK (sparse_irq_lock); -static struct irq_desc **irq_desc_ptrs__read_mostly ; +static RADIX_TREE(irq_desc_tree, GFP_ATOMIC); + +static void set_irq_desc (unsigned int irq,struct irq_desc *desc) +{ +radix_tree_insert (&irq_desc_tree, irq, desc); +} + +struct irq_desc *irq_to_desc (unsigned int irq) +{ +return radix_tree_lookup (&irq_desc_tree, irq); +} + +void replace_irq_desc (unsigned int irq,struct irq_desc *desc) +{ +void **ptr; + + ptr =radix_tree_lookup_slot (&irq_desc_tree, irq); +if (ptr) +radix_tree_replace_slot (ptr, desc); +} static struct irq_desc irq_desc_legacy[NR_IRQS_LEGACY] __cacheline_aligned_in_smp = { [0 ...NR_IRQS_LEGACY -1 ] = {
@@ -159,9 +179,6 @@ int __init early_irq_init(void) legacy_count =ARRAY_SIZE (irq_desc_legacy); node = first_online_node; -/* allocate irq_desc_ptrs array based on nr_irqs */ - irq_desc_ptrs =kcalloc (nr_irqs,sizeof (void *),GFP_NOWAIT ); -/* allocate based on nr_cpu_ids */ kstat_irqs_legacy =kzalloc_node (NR_IRQS_LEGACY * nr_cpu_ids *sizeof (int ),GFP_NOWAIT , node);
@@ -175,28 +192,12 @@ int __init early_irq_init(void)lockdep_set_class (&desc[i].lock, &irq_desc_lock_class);alloc_desc_masks (&desc[i], node, true);init_desc_masks (&desc[i]); - irq_desc_ptrs[i] = desc + i; +set_irq_desc (i, &desc[i]); } -for (i = legacy_count; i < nr_irqs; i++) - irq_desc_ptrs[i] =NULL ; -return arch_early_irq_init (); } -struct irq_desc *irq_to_desc (unsigned int irq) -{ -if (irq_desc_ptrs && irq < nr_irqs) -return irq_desc_ptrs[irq]; - -return NULL ; -} - -void replace_irq_desc (unsigned int irq,struct irq_desc *desc) -{ - irq_desc_ptrs[irq] = desc; -} -struct irq_desc *__ref irq_to_desc_alloc_node (unsigned int irq,int node) {struct irq_desc *desc;
@@ -208,14 +209,14 @@ struct irq_desc * __ref irq_to_desc_alloc_node(unsigned int irq, int node)return NULL ; } - desc = irq_desc_ptrs[irq]; + desc =irq_to_desc (irq);if (desc)return desc;raw_spin_lock_irqsave (&sparse_irq_lock, flags);/* We have to check it to avoid races with another CPU */ - desc = irq_desc_ptrs[irq]; + desc =irq_to_desc (irq);if (desc) goto out_unlock;
@@ -228,7 +229,7 @@ struct irq_desc * __ref irq_to_desc_alloc_node(unsigned int irq, int node) }init_one_irq_desc (irq, desc, node); - irq_desc_ptrs[irq] = desc; +set_irq_desc (irq, desc); out_unlock:raw_spin_unlock_irqrestore (&sparse_irq_lock, flags);
PATCH 32/35 x86: remove arch_probe_nr_irqs
In reply to Yinghai Luso keep nr_irqs == NR_IRQS
--- arch/x86/kernel/apic/io_apic.c | 22 ---------------------- 1 files changed, 0 insertions(+), 22 deletions(-)
arch/x86/kernel/apic/io_apic.c +0 -22
@@ -3878,28 +3878,6 @@ void __init probe_nr_irqs_gsi(void)printk (KERN_DEBUG "nr_irqs_gsi: %d\n" , nr_irqs_gsi); } -#ifdef CONFIG_SPARSE_IRQ -int __init arch_probe_nr_irqs (void ) -{ -int nr; - -if (nr_irqs > (NR_VECTORS * nr_cpu_ids)) - nr_irqs =NR_VECTORS * nr_cpu_ids; - - nr = nr_irqs_gsi +8 * nr_cpu_ids; -#if defined(CONFIG_PCI_MSI ) || defined(CONFIG_HT_IRQ ) -/* -* for MSI and HT dyn irq -*/ - nr += nr_irqs_gsi *64 ; -#endif -if (nr < nr_irqs) - nr_irqs = nr; - -return 0 ; -} -#endif -static int __io_apic_set_pci_routing (struct device *dev,int irq,struct io_apic_irq_attr *irq_attr) {
Signature · 1 line
1.6.4.2
[tip:x86/irq] x86, irq: Remove arch_probe_nr_irqs
Commit-ID: 6738762d73a237ec322b04d8b9d55c8fd5d84713 Gitweb: http://git.kernel.org/tip/6738762d73a237ec322b04d8b9d55c8fd5d84713 Author: Yinghai Lu <[email protected]> AuthorDate: Wed, 10 Feb 2010 01:20:36 -0800 Committer: H. Peter Anvin <[email protected]> CommitDate: Wed, 17 Feb 2010 17:29:21 -0800
x86, irq: Remove arch_probe_nr_irqs
So keep nr_irqs == NR_IRQS. With radix trees is matters less.
LKML-Reference: <[email protected]>
--- arch/x86/kernel/apic/io_apic.c | 22 ---------------------- 1 files changed, 0 insertions(+), 22 deletions(-)
arch/x86/kernel/apic/io_apic.c +0 -22
@@ -3826,28 +3826,6 @@ void __init probe_nr_irqs_gsi(void)printk (KERN_DEBUG "nr_irqs_gsi: %d\n" , nr_irqs_gsi); } -#ifdef CONFIG_SPARSE_IRQ -int __init arch_probe_nr_irqs (void ) -{ -int nr; - -if (nr_irqs > (NR_VECTORS * nr_cpu_ids)) - nr_irqs =NR_VECTORS * nr_cpu_ids; - - nr = nr_irqs_gsi +8 * nr_cpu_ids; -#if defined(CONFIG_PCI_MSI ) || defined(CONFIG_HT_IRQ ) -/* -* for MSI and HT dyn irq -*/ - nr += nr_irqs_gsi *16 ; -#endif -if (nr < nr_irqs) - nr_irqs = nr; - -return 0 ; -} -#endif -static int __io_apic_set_pci_routing (struct device *dev,int irq,struct io_apic_irq_attr *irq_attr) {
PATCH 33/35 use nr_cpus= to set nr_cpu_ids early
In reply to Yinghai Luon x86, before prefill_possible_map(), nr_cpu_ids will be NR_CPUS aka CONFIG_NR_CPUS
add nr_cpus= to set nr_cpu_ids. so we can simulate cpus <=8 are installed on normal config.
-v2: accordging to Christoph, acpi_numa_init should use nr_cpu_ids in stead of
NR_CPUS.
-v3: add doc in kernel-parameters.txt according to Andrew.
--- Documentation/kernel-parameters.txt | 6 ++++++ arch/ia64/kernel/acpi.c | 4 ++-- arch/x86/kernel/smpboot.c | 7 ++++--- drivers/acpi/numa.c | 4 ++-- init/main.c | 14 ++++++++++++++ 5 files changed, 28 insertions(+), 7 deletions(-)
Documentation/kernel-parameters.txt +6 -0
@@ -1775,6 +1775,12 @@ and is between 256 and 4096 characters. It is defined in the file purges which is reported from either PAL_VM_SUMMARY or SAL PALO. + nr_cpus= [SMP] Maximum number of processors that an SMP kernel + could support. nr_cpus=n : n >= 1 limits the kernel to + supporting 'n' processors. Later in runtime you can not + use hotplug cpu feature to put more cpu back to online. + just like you compile the kernel NR_CPUS=n + nr_uarts= [SERIAL] maximum number of UARTs to be registered. numa_zonelist_order= [KNL, BOOT] Select zonelist order for NUMA.
arch/ia64/kernel/acpi.c +2 -2
@@ -881,8 +881,8 @@ __init void prefill_possible_map(void) possible = available_cpus + additional_cpus; -if (possible >NR_CPUS ) - possible =NR_CPUS ; +if (possible > nr_cpu_ids) + possible = nr_cpu_ids;printk (KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n" , possible,max ((possible - available_cpus),0 ));
arch/x86/kernel/smpboot.c +4 -3
@@ -1215,11 +1215,12 @@ __init void prefill_possible_map(void) total_cpus =max_t (int, possible, num_processors + disabled_cpus); -if (possible >CONFIG_NR_CPUS ) { +/* nr_cpu_ids could be reduced via nr_cpus= */ +if (possible > nr_cpu_ids) {printk (KERN_WARNING "%d Processors exceeds NR_CPUS limit of %d\n" , - possible,CONFIG_NR_CPUS ); - possible =CONFIG_NR_CPUS ; + possible, nr_cpu_ids); + possible = nr_cpu_ids; } printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n",
drivers/acpi/numa.c +2 -2
@@ -279,9 +279,9 @@ int __init acpi_numa_init(void)/* SRAT: Static Resource Affinity Table */ if (!acpi_table_parse (ACPI_SIG_SRAT , acpi_parse_srat)) {acpi_table_parse_srat (ACPI_SRAT_TYPE_X2APIC_CPU_AFFINITY , - acpi_parse_x2apic_affinity,NR_CPUS ); + acpi_parse_x2apic_affinity, nr_cpu_ids);acpi_table_parse_srat (ACPI_SRAT_TYPE_CPU_AFFINITY , - acpi_parse_processor_affinity,NR_CPUS ); + acpi_parse_processor_affinity, nr_cpu_ids); ret =acpi_table_parse_srat (ACPI_SRAT_TYPE_MEMORY_AFFINITY , acpi_parse_memory_affinity,NR_NODE_MEMBLKS );
init/main.c +14 -0
@@ -149,6 +149,20 @@ static int __init nosmp(char *str)early_param ("nosmp" , nosmp); +/* this is hard limit */ +static int __init nrcpus (char *str) +{ +int nr_cpus; + +get_option (&str, &nr_cpus); +if (nr_cpus >0 && nr_cpus < nr_cpu_ids) + nr_cpu_ids = nr_cpus; + +return 0 ; +} + +early_param ("nr_cpus" , nrcpus); +static int __init maxcpus (char *str) {get_option (&str, &setup_max_cpus);
Signature · 1 line
1.6.4.2
[tip:x86/irq] smp: Use nr_cpus= to set nr_cpu_ids early
Commit-ID: 2b633e3fac5efada088b57d31e65401f22bcc18f Gitweb: http://git.kernel.org/tip/2b633e3fac5efada088b57d31e65401f22bcc18f Author: Yinghai Lu <[email protected]> AuthorDate: Wed, 10 Feb 2010 01:20:37 -0800 Committer: H. Peter Anvin <[email protected]> CommitDate: Wed, 17 Feb 2010 17:30:22 -0800
smp: Use nr_cpus= to set nr_cpu_ids early
On x86, before prefill_possible_map(), nr_cpu_ids will be NR_CPUS aka CONFIG_NR_CPUS.
Add nr_cpus= to set nr_cpu_ids. so we can simulate cpus <=8 are installed on normal config.
-v2: accordging to Christoph, acpi_numa_init should use nr_cpu_ids in stead of
NR_CPUS.
-v3: add doc in kernel-parameters.txt according to Andrew.
LKML-Reference: <[email protected]>
--- Documentation/kernel-parameters.txt | 6 ++++++ arch/ia64/kernel/acpi.c | 4 ++-- arch/x86/kernel/smpboot.c | 7 ++++--- drivers/acpi/numa.c | 4 ++-- init/main.c | 14 ++++++++++++++ 5 files changed, 28 insertions(+), 7 deletions(-)
Documentation/kernel-parameters.txt +6 -0
@@ -1772,6 +1772,12 @@ and is between 256 and 4096 characters. It is defined in the file purges which is reported from either PAL_VM_SUMMARY or SAL PALO. + nr_cpus= [SMP] Maximum number of processors that an SMP kernel + could support. nr_cpus=n : n >= 1 limits the kernel to + supporting 'n' processors. Later in runtime you can not + use hotplug cpu feature to put more cpu back to online. + just like you compile the kernel NR_CPUS=n + nr_uarts= [SERIAL] maximum number of UARTs to be registered. numa_zonelist_order= [KNL, BOOT] Select zonelist order for NUMA.
arch/ia64/kernel/acpi.c +2 -2
@@ -881,8 +881,8 @@ __init void prefill_possible_map(void) possible = available_cpus + additional_cpus; -if (possible >NR_CPUS ) - possible =NR_CPUS ; +if (possible > nr_cpu_ids) + possible = nr_cpu_ids;printk (KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n" , possible,max ((possible - available_cpus),0 ));
arch/x86/kernel/smpboot.c +4 -3
@@ -1213,11 +1213,12 @@ __init void prefill_possible_map(void) total_cpus =max_t (int, possible, num_processors + disabled_cpus); -if (possible >CONFIG_NR_CPUS ) { +/* nr_cpu_ids could be reduced via nr_cpus= */ +if (possible > nr_cpu_ids) {printk (KERN_WARNING "%d Processors exceeds NR_CPUS limit of %d\n" , - possible,CONFIG_NR_CPUS ); - possible =CONFIG_NR_CPUS ; + possible, nr_cpu_ids); + possible = nr_cpu_ids; } printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n",
drivers/acpi/numa.c +2 -2
@@ -279,9 +279,9 @@ int __init acpi_numa_init(void)/* SRAT: Static Resource Affinity Table */ if (!acpi_table_parse (ACPI_SIG_SRAT , acpi_parse_srat)) {acpi_table_parse_srat (ACPI_SRAT_TYPE_X2APIC_CPU_AFFINITY , - acpi_parse_x2apic_affinity,NR_CPUS ); + acpi_parse_x2apic_affinity, nr_cpu_ids);acpi_table_parse_srat (ACPI_SRAT_TYPE_CPU_AFFINITY , - acpi_parse_processor_affinity,NR_CPUS ); + acpi_parse_processor_affinity, nr_cpu_ids); ret =acpi_table_parse_srat (ACPI_SRAT_TYPE_MEMORY_AFFINITY , acpi_parse_memory_affinity,NR_NODE_MEMBLKS );
init/main.c +14 -0
@@ -149,6 +149,20 @@ static int __init nosmp(char *str)early_param ("nosmp" , nosmp); +/* this is hard limit */ +static int __init nrcpus (char *str) +{ +int nr_cpus; + +get_option (&str, &nr_cpus); +if (nr_cpus >0 && nr_cpus < nr_cpu_ids) + nr_cpu_ids = nr_cpus; + +return 0 ; +} + +early_param ("nr_cpus" , nrcpus); +static int __init maxcpus (char *str) {get_option (&str, &setup_max_cpus);
PATCH 34/35 x86: use num_processors for possible cpus
In reply to Yinghai Lusome systems that have disable cpus entries because same
BIOS will support 2 sockets and 4 sockets and more at same time, BIOS just leave some disable entries, but those system do not support cpu hotplug. we don't need treat disabled_cpus as hotplug cpus.
so we can make nr_cpu_ids smaller and save more space
(pcpu data allocations), and could make some systems run with logical flat instead of physical flat apic mode
-v2: change to black list instead
-v3: just remove that, and the one use possible_cpus= directly.
--- arch/x86/kernel/smpboot.c | 3 +-- 1 files changed, 1 insertions(+), 2 deletions(-)
arch/x86/kernel/smpboot.c +1 -2
@@ -1194,7 +1194,6 @@ early_param("possible_cpus", _setup_possible_cpus);* - Ashok Raj * * Three ways to find out the number of additional hotplug CPUs: -* - If the BIOS specified disabled CPUs in ACPI/mptables use that. * - The user can overwrite it with possible_cpus=NUM * - Otherwise don't reserve additional CPUs. * We do this because additional CPUs waste a lot of memory.
@@ -1209,7 +1208,7 @@ __init void prefill_possible_map(void) num_processors =1 ;if (setup_possible_cpus ==-1 ) - possible = num_processors + disabled_cpus; + possible = num_processors;else possible = setup_possible_cpus;
Signature · 1 line
1.6.4.2
H. Peter Anvin
reviewerRe: [PATCH 34/35] x86: use num_processors for possible cpus
Quoted 12 lines · Yinghai Lu
some systems that have disable cpus entries because same
BIOS will support 2 sockets and 4 sockets and more at same time, BIOS just leave some disable entries, but those system do not support cpu hotplug. we don't need treatdisabled_cpusas hotplug cpus.
so we can makenr_cpu_idssmaller and save more space
(pcpu data allocations), and could make some systems run with logical flat instead of physical flat apic mode(quoted diff) +0
-2-v2: change to black list instead -v3: just remove that, and the one use possible_cpus= directly.
Quoted 1 line
Signed-off-by Yinghai Lu <[email protected]>
I'm confused by this one. This would seem to mean that unless you're specifying possible_cpus= then you are not treating anything as hotpluggable.
This is clearly wrong, and it would appear to go the wrong direction in terms of what is safe.
What am I missing here?
-hpa
Re: [PATCH 34/35] x86: use num_processors for possible cpus
Quoted 19 lines · H. Peter Anvin
Quoted 12 lines · Yinghai Lu
some systems that have disable cpus entries because same
BIOS will support 2 sockets and 4 sockets and more at same time, BIOS just leave some disable entries, but those system do not support cpu hotplug. we don't need treatdisabled_cpusas hotplug cpus.
so we can makenr_cpu_idssmaller and save more space
(pcpu data allocations), and could make some systems run with logical flat instead of physical flat apic mode(quoted diff) +0
-2-v2: change to black list instead -v3: just remove that, and the one use possible_cpus= directly.Quoted 1 line
Signed-off-by Yinghai Lu <[email protected]>I'm confused by this one. This would seem to mean that unless you're specifying possible_cpus= then you are not treating anything as hotpluggable.
Quoted 4 lines
This is clearly wrong, and it would appear to go the wrong direction in terms of what is safe.
What am I missing here?
per_cpu setup will allocate some mem for every cpu according to possible cpus.
no spec says that we should disable cpus entries in MADT as hotplug cpus.
also how many system that support hotplug cpus there?
Yinghai
H. Peter Anvin
reviewerRe: [PATCH 34/35] x86: use num_processors for possible cpus
Quoted 5 lines · Yinghai Lu
Quoted 5 lines
I'm confused by this one. This would seem to mean that unless you're specifying possible_cpus= then you are not treating anything as hotpluggable.
Quoted 7 lines
Quoted 4 lines
This is clearly wrong, and it would appear to go the wrong direction in terms of what is safe.
What am I missing here?
per_cpusetup will allocate some mem for every cpu according to possible cpus.
Yes, and I have repeatedly requested that we allocate the memory on the first up of a disabled CPU rather than eagerly, but in *most* configurations the amount is relatively small.
Quoted 1 line
no spec says that we should disable cpus entries in MADT as hotplug cpus.
Reality seems to, though. Consider the bug report that led to patch 681ee44d40d7c93b42118320e4620d07d8704fd6 for example.
Quoted 1 line
also how many system that support hotplug cpus there?
In terms of physical machines, not all that many; however, it is getting common to use CPU hotplug for virtual environments so they can be dynamically scaled.
-hpa
Re: [PATCH 34/35] x86: use num_processors for possible cpus
Quoted 6 lines · H. Peter Anvin
Quoted 2 lines
per_cpusetup will allocate some mem for every cpu according to possible cpus.Yes, and I have repeatedly requested that we allocate the memory on the first up of a disabled CPU rather than eagerly, but in *most* configurations the amount is relatively small.
The size of the static per cpu segment is likely around 30k and you will likely add another 30k in dynamic allocations.
As I have also repeatedly stated: Dynamic percpu data allocation when onlining / offlining processors will complicate locking (cannot rely on percpu be present anymore) and introduce numerous additional hotplug notifiers into subsystems.
Newly allocating a per cpu segment also has consequences for subsystems that dynamically allocate per cpu data (not add another cpu but dynamically allocate data that needs to be present on all processors). They would have to prepare the per cpu data which would create another need for callbacks.
All of the measures necessary would result in problems of ensuring object existence in critical code paths that use percpu data for performance reasons.
H. Peter Anvin
reviewerRe: [PATCH 34/35] x86: use num_processors for possible cpus
Quoted 5 lines · Christoph Lameter
Quoted 4 lines
Yes, and I have repeatedly requested that we allocate the memory on the first up of a disabled CPU rather than eagerly, but in *most* configurations the amount is relatively small.
Quoted 7 lines
The size of the static per cpu segment is likely around 30k and you will likely add another 30k in dynamic allocations.
As I have also repeatedly stated: Dynamic percpu data allocation when onlining / offlining processors will complicate locking (cannot rely on percpu be present anymore) and introduce numerous additional hotplug notifiers into subsystems.
I did state explicitly "on first up". Trying to free it would be insane. There are a couple of subsystems which are percpu memory pigs... so far it's not clear any of them actually matters in a production kernel. 60K * 16 phantom processors is still ~ 1 MB, which probably isn't enough to worry about but isn't great.
-hpa
Re: [PATCH 34/35] x86: use num_processors for possible cpus
Quoted 10 lines · H. Peter Anvin
Quoted 4 lines
As I have also repeatedly stated: Dynamic percpu data allocation when onlining / offlining processors will complicate locking (cannot rely on percpu be present anymore) and introduce numerous additional hotplug notifiers into subsystems.
I did state explicitly "on first up". Trying to free it would be insane. There are a couple of subsystems which are percpu memory pigs... so far it's not clear any of them actually matters in a production kernel. 60K * 16 phantom processors is still ~ 1 MB, which probably isn't enough to worry about but isn't great.
The first up still means the addition of notifiers for subsystems that have to initialilze their per cpu data and dealing with potential races that would be caused by adding those.
H. Peter Anvin
reviewerRe: [PATCH 34/35] x86: use num_processors for possible cpus
Quoted 13 lines · Christoph Lameter
Quoted 10 lines · H. Peter Anvin
Quoted 4 lines
As I have also repeatedly stated: Dynamic percpu data allocation when onlining / offlining processors will complicate locking (cannot rely on percpu be present anymore) and introduce numerous additional hotplug notifiers into subsystems.
I did state explicitly "on first up". Trying to free it would be insane. There are a couple of subsystems which are percpu memory pigs... so far it's not clear any of them actually matters in a production kernel. 60K * 16 phantom processors is still ~ 1 MB, which probably isn't enough to worry about but isn't great.
Quoted 4 lines
The first up still means the addition of notifiers for subsystems that have to initialilze their per cpu data and dealing with potential races that would be caused by adding those.
Yes... it's ugly no matter which way we go (wasted memory vs. code complexity.) Wasted memory can be alleviated by minimizing the use of percpu memory; callbacks can be minimized by keeping a pattern buffer to which new allocations are initialized, and encouraging users to set things up so that that state is at least initially sufficient.
We're probably okay for now (the only really heavy users of percpu are debugging at this point), and the other thing that might be worthwhile is if we can actually determine what platforms a "disabled CPU" could actually come to life. Hopefully disabled CPUs that aren't really available aren't *all* that common (it's not too common that people even turn off SMT, and if they know to do that they might be willing to add a kernel option if they care about the memory, too.)
However, if percpu memory usage increases, it might be messy.
-hpa
Signature · 2 lines
H. Peter Anvin, Intel Open Source Technology Center I work for Intel. I don't speak on their behalf.
PATCH 35/35 x86: make 32bit apic flat to physflat switch like 64bit
In reply to Yinghai Lukill def_to_bigsmp
and move switch from default to bigsmp at default_setup_apic_routing... so make default_setup_apic_routing more like 64 bit
also make the dmi relate code to be __init/__initdata
-v2: refresh it according to change in upstream
--- arch/x86/include/asm/apic.h | 3 - arch/x86/include/asm/mpspec.h | 1 - arch/x86/kernel/apic/bigsmp_32.c | 48 +--------------- arch/x86/kernel/apic/probe_32.c | 115 ++++++++++++++++++++------------------ arch/x86/kernel/apic/probe_64.c | 2 +- arch/x86/kernel/setup.c | 2 - arch/x86/kernel/smpboot.c | 2 +- 7 files changed, 65 insertions(+), 108 deletions(-)
arch/x86/include/asm/apic.h +0 -3
@@ -456,9 +456,6 @@ static inline void default_wait_for_init_deassert(atomic_t *deassert)return ; } -extern void generic_bigsmp_probe (void ); - -#ifdef CONFIG_X86_LOCAL_APIC #include <asm/smp.h>
arch/x86/include/asm/mpspec.h +0 -1
@@ -23,7 +23,6 @@ extern int pic_mode;#define MAX_IRQ_SOURCES 256 -extern unsigned int def_to_bigsmp;extern u8 apicid_2_node[];#ifdef CONFIG_X86_NUMAQ
arch/x86/kernel/apic/bigsmp_32.c +2 -46
81 lines not on this page · raw message
arch/x86/kernel/apic/probe_32.c +61 -54
168 lines not on this page · raw message
arch/x86/kernel/apic/probe_64.c +1 -1
@@ -67,7 +67,7 @@ void __init default_setup_apic_routing(void) }#endif -if (apic == &apic_flat &&num_possible_cpus () >8 ) +if (apic == &apic_flat && nr_cpu_ids >8 ) apic = &apic_physflat;printk (KERN_INFO "Setting APIC routing to %s\n" , apic->name);
arch/x86/kernel/setup.c +0 -2
@@ -184,8 +184,6 @@ static void set_mca_bus(int x)#endif } -unsigned int def_to_bigsmp; -/* for MCA, but anyone else can use it if they want */ unsigned int machine_id;unsigned int machine_submodel_id;
arch/x86/kernel/smpboot.c +1 -1
@@ -950,7 +950,7 @@ static int __init smp_sanity_check(unsigned max_cpus)preempt_disable ();#if !defined(CONFIG_X86_BIGSMP ) && defined(CONFIG_X86_32 ) -if (def_to_bigsmp && nr_cpu_ids >8 ) { +if (apic == &apic_default && nr_cpu_ids >8 ) {unsigned int cpu;unsigned nr;
Signature · 1 line
1.6.4.2
i've done some testing of the bits Peter has merged into x86/bootmem in -tip, and it crashes during early bootup with:
[ 0.000000] #8 [0000012000 - 000001a000] BOOTMAP ==> [0000012000 - 000001a000] [ 0.000000] bootmem alloc of 4194304 bytes failed! [ 0.000000] Kernel panic - not syncing: Out of memory [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.33-rc7-tip-00770-g525df42-dirty #16566 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff8167410b>] panic+0x75/0x146 [ 0.000000] [<ffffffff832b0a04>] ___alloc_bootmem_node+0x0/0x60 [ 0.000000] [<ffffffff832b0c27>] __alloc_bootmem+0xb/0xd [ 0.000000] [<ffffffff832b2d7b>] sparse_init+0x34/0x2d9 [ 0.000000] [<ffffffff832b0dc9>] ? reserve_bootmem+0x20/0x22 [ 0.000000] [<ffffffff832aac44>] paging_init+0x43/0x52 [ 0.000000] [<ffffffff8329fb2e>] setup_arch+0x583/0x615 [ 0.000000] [<ffffffff8105e794>] ? clockevents_register_notifier+0x3e/0x4a [ 0.000000] [<ffffffff8329db07>] start_kernel+0xf3/0x349 [ 0.000000] [<ffffffff8329d276>] x86_64_start_reservations+0x7d/0x81 [ 0.000000] [<ffffffff8329d3c6>] x86_64_start_kernel+0x14c/0x15b [ 0.000000] Rebooting in 1 seconds..Press any key to enter the menu
full bootlog below, config attached.
Thanks,
Ingo
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.33-rc7-tip-00770-g525df42-dirty (mingo@sirius) (gcc version 4.4.1 20091008 (Red Hat 4.4.1-20) (GCC) ) #16566 SMP Thu Feb 11 18:35:25 CET 2010 [ 0.000000] Command line: root=/dev/sda6 earlyprintk=ttyS0,115200 console=ttyS0,115200 debug initcall_debug sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=0 panic=1 3 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] modified: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] found SMP MP-table at [ffff8800000f5680] f5680 [ 0.000000] init_memory_mapping: 0000000000000000-000000003fff0000 [ 0.000000] 0000000000 - 003fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 3fff0000 @ 100000-302000 [ 0.000000] (9/32 early reservations) ==> bootmem [0000000000 - 003fff0000] [ 0.000000] #0 [0001000000 - 000816f1f0] TEXT DATA BSS ==> [0001000000 - 000816f1f0] [ 0.000000] #1 [00000f5690 - 0000100000] BIOS reserved ==> [00000f5690 - 0000100000] [ 0.000000] #2 [00000f5680 - 00000f5690] MP-table mpf ==> [00000f5680 - 00000f5690] [ 0.000000] #3 [000009f800 - 00000f1400] BIOS reserved ==> [000009f800 - 00000f1400] [ 0.000000] #4 [00000f152c - 00000f5680] BIOS reserved ==> [00000f152c - 00000f5680] [ 0.000000] #5 [00000f1400 - 00000f152c] MP-table mpc ==> [00000f1400 - 00000f152c] [ 0.000000] #6 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000100000 - 0000300000] PGTABLE ==> [0000100000 - 0000300000] [ 0.000000] #8 [0000012000 - 000001a000] BOOTMAP ==> [0000012000 - 000001a000] [ 0.000000] bootmem alloc of 4194304 bytes failed! [ 0.000000] Kernel panic - not syncing: Out of memory [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.33-rc7-tip-00770-g525df42-dirty #16566 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff8167410b>] panic+0x75/0x146 [ 0.000000] [<ffffffff832b0a04>] ___alloc_bootmem_node+0x0/0x60 [ 0.000000] [<ffffffff832b0c27>] __alloc_bootmem+0xb/0xd [ 0.000000] [<ffffffff832b2d7b>] sparse_init+0x34/0x2d9 [ 0.000000] [<ffffffff832b0dc9>] ? reserve_bootmem+0x20/0x22 [ 0.000000] [<ffffffff832aac44>] paging_init+0x43/0x52 [ 0.000000] [<ffffffff8329fb2e>] setup_arch+0x583/0x615 [ 0.000000] [<ffffffff8105e794>] ? clockevents_register_notifier+0x3e/0x4a [ 0.000000] [<ffffffff8329db07>] start_kernel+0xf3/0x349 [ 0.000000] [<ffffffff8329d276>] x86_64_start_reservations+0x7d/0x81 [ 0.000000] [<ffffffff8329d3c6>] x86_64_start_kernel+0x14c/0x15b [ 0.000000] Rebooting in 1 seconds..Press any key to enter the menu
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.33-rc7
# Thu Feb 11 18:34:19 2010
#CONFIG_64BIT=y
# CONFIG_X86_32 is not setCONFIG_X86_64=yCONFIG_X86=yCONFIG_OUTPUT_FORMAT="elf64-x86-64" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_GENERIC_TIME=yCONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_BUG=y CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_HWEIGHT=yCONFIG_GENERIC_GPIO=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=yCONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_64_SMP=yCONFIG_X86_HT=yCONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set CONFIG_BOOTPARAM_SUPPORT_NOT_WANTED=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y
#
# General setup
#CONFIG_EXPERIMENTAL=y
# CONFIG_BROKEN_BOOT_ALLOWED4 is not setCONFIG_BROKEN_BOOT_DISALLOWED=yCONFIG_BROKEN_BOOT_EUROPE=yCONFIG_BROKEN_BOOT_TITAN=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=yCONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not setCONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_LZO is not setCONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_POSIX_MQUEUE_SYSCTL=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_BSD_PROCESS_ACCT_V3=yCONFIG_TASKSTATS=yCONFIG_TASK_DELAY_ACCT=yCONFIG_TASK_XACCT=y
# CONFIG_TASK_IO_ACCOUNTING is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not setCONFIG_RCU_TRACE=yCONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not setCONFIG_TREE_RCU_TRACE=yCONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not setCONFIG_LOG_BUF_SHIFT=20CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=yCONFIG_CGROUPS=yCONFIG_CGROUP_DEBUG=y
# CONFIG_CGROUP_NS is not setCONFIG_CGROUP_FREEZER=yCONFIG_CGROUP_DEVICE=yCONFIG_CPUSETS=y
# CONFIG_PROC_PID_CPUSET is not setCONFIG_CGROUP_CPUACCT=yCONFIG_RESOURCE_COUNTERS=yCONFIG_CGROUP_MEM_RES_CTLR=y
# CONFIG_CGROUP_MEM_RES_CTLR_SWAP is not setCONFIG_CGROUP_SCHED=yCONFIG_FAIR_GROUP_SCHED=yCONFIG_RT_GROUP_SCHED=yCONFIG_MM_OWNER=yCONFIG_SYSFS_DEPRECATED=yCONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not setCONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_SYSCTL=yCONFIG_ANON_INODES=yCONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not setCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_KALLSYMS_EXTRA_PASS=yCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not setCONFIG_BASE_FULL=yCONFIG_FUTEX=y
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not setCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_AIO=yCONFIG_HAVE_PERF_EVENTS=yCONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#CONFIG_PERF_EVENTS=yCONFIG_PERF_COUNTERS=yCONFIG_DEBUG_PERF_USE_VMALLOC=yCONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PCI_QUIRKS is not setCONFIG_SLUB_DEBUG=yCONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not setCONFIG_HAVE_OPROFILE=yCONFIG_KPROBES=yCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_KRETPROBES=yCONFIG_USER_RETURN_NOTIFIER=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_HAVE_DMA_ATTRS=yCONFIG_HAVE_DMA_API_DEBUG=yCONFIG_HAVE_HW_BREAKPOINT=yCONFIG_HAVE_USER_RETURN_NOTIFIER=y
#
# GCOV-based kernel profiling
#CONFIG_SLOW_WORK=yCONFIG_SLOW_WORK_DEBUG=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not setCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0CONFIG_MODULES=yCONFIG_MODULE_FORCE_LOAD=yCONFIG_MODULE_UNLOAD=yCONFIG_MODULE_FORCE_UNLOAD=yCONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not setCONFIG_STOP_MACHINE=yCONFIG_BLOCK=yCONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_CGROUP is not setCONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_DEADLINE=m
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set # CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set # CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set # CONFIG_INLINE_READ_UNLOCK_IRQ is not set # CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set # CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set # CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y
#
# Processor type and features
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=yCONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP_SUPPORT is not set
# CONFIG_SPARSE_IRQ is not setCONFIG_X86_MPPARSE=yCONFIG_X86_EXTENDED_PLATFORM=yCONFIG_X86_VSMP=yCONFIG_X86_SUPPORTS_MEMORY_FAILURE=yCONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not setCONFIG_PARAVIRT=yCONFIG_PARAVIRT_DEBUG=y
# CONFIG_NO_BOOTMEM is not setCONFIG_MEMTEST=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not setCONFIG_GENERIC_CPU=yCONFIG_X86_CPU=yCONFIG_X86_INTERNODE_CACHE_SHIFT=12CONFIG_X86_CMPXCHG=yCONFIG_X86_L1_CACHE_SHIFT=6CONFIG_X86_XADD=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_TSC=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_CMOV=yCONFIG_X86_MINIMUM_CPU_FAMILY=64CONFIG_X86_DEBUGCTLMSR=yCONFIG_PROCESSOR_SELECT=yCONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_AMD=yCONFIG_CPU_SUP_CENTAUR=y
# CONFIG_X86_DS is not setCONFIG_HPET_TIMER=y
# CONFIG_DMI is not set
# CONFIG_GART_IOMMU is not set
# CONFIG_CALGARY_IOMMU is not setCONFIG_SWIOTLB=yCONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not setCONFIG_MAXSMP=yCONFIG_NR_CPUS=4096
# CONFIG_SCHED_SMT is not setCONFIG_SCHED_MC=yCONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not setCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=yCONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=yCONFIG_X86_MCE=yCONFIG_X86_MCE_INTEL=yCONFIG_X86_MCE_AMD=yCONFIG_X86_MCE_THRESHOLD=yCONFIG_X86_MCE_INJECT=yCONFIG_X86_THERMAL_VECTOR=y
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not setCONFIG_X86_MSR=mCONFIG_X86_CPUID=y
# CONFIG_UP_WANTED_1 is not setCONFIG_SMP=yCONFIG_ARCH_PHYS_ADDR_T_64BIT=yCONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not setCONFIG_ARCH_PROC_KCORE_TEXT=yCONFIG_ARCH_SPARSEMEM_DEFAULT=yCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_ARCH_MEMORY_PROBE=yCONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not setCONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=yCONFIG_HAVE_MEMORY_PRESENT=yCONFIG_SPARSEMEM_EXTREME=yCONFIG_SPARSEMEM_VMEMMAP_ENABLE=yCONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=yCONFIG_SPARSEMEM_VMEMMAP=yCONFIG_MEMORY_HOTPLUG=yCONFIG_MEMORY_HOTPLUG_SPARSE=yCONFIG_MEMORY_HOTREMOVE=yCONFIG_PAGEFLAGS_EXTENDED=yCONFIG_SPLIT_PTLOCK_CPUS=999999CONFIG_MIGRATION=yCONFIG_PHYS_ADDR_T_64BIT=yCONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=yCONFIG_MMU_NOTIFIER=yCONFIG_KSM=yCONFIG_DEFAULT_MMAP_MIN_ADDR=4096CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not setCONFIG_X86_CHECK_BIOS_CORRUPTION=yCONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=yCONFIG_X86_RESERVE_LOW_64K=yCONFIG_MTRR=yCONFIG_MTRR_SANITIZER=yCONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1CONFIG_X86_PAT=yCONFIG_ARCH_USES_PG_UNCACHED=yCONFIG_SECCOMP=yCONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not setCONFIG_HZ_1000=yCONFIG_HZ=1000CONFIG_SCHED_HRTICK=yCONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not setCONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not setCONFIG_PHYSICAL_ALIGN=0x1000000CONFIG_HOTPLUG_CPU=yCONFIG_COMPAT_VDSO=yCONFIG_CMDLINE_BOOL=yCONFIG_CMDLINE=""CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=yCONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
#
# Power management and ACPI options
#
# CONFIG_PM is not setCONFIG_SFI=y
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=m CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#CONFIG_X86_P4_CLOCKMOD=y
#
# shared options # CONFIG_X86_SPEEDSTEP_LIB=y # CONFIG_CPU_IDLE is not set
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#CONFIG_PCI=yCONFIG_PCI_DIRECT=yCONFIG_PCI_DOMAINS=yCONFIG_PCIEPORTBUS=yCONFIG_HOTPLUG_PCI_PCIE=yCONFIG_PCIEAER=yCONFIG_PCIE_ECRC=y
# CONFIG_PCIEAER_INJECT is not setCONFIG_PCIEASPM=yCONFIG_PCIEASPM_DEBUG=yCONFIG_ARCH_SUPPORTS_MSI=yCONFIG_PCI_MSI=yCONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not setCONFIG_PCI_STUB=m
# CONFIG_HT_IRQ is not setCONFIG_PCI_IOV=yCONFIG_ISA_DMA_API=yCONFIG_K8_NB=yCONFIG_PCCARD=y
# CONFIG_PCMCIA is not setCONFIG_CARDBUS=y
#
# PC-card bridges
#CONFIG_YENTA=yCONFIG_YENTA_O2=yCONFIG_YENTA_RICOH=y
# CONFIG_YENTA_TI is not set
# CONFIG_YENTA_TOSHIBA is not setCONFIG_PCCARD_NONSTATIC=yCONFIG_HOTPLUG_PCI=yCONFIG_HOTPLUG_PCI_FAKE=yCONFIG_HOTPLUG_PCI_CPCI=yCONFIG_HOTPLUG_PCI_CPCI_ZT5550=yCONFIG_HOTPLUG_PCI_CPCI_GENERIC=yCONFIG_HOTPLUG_PCI_SHPC=y
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_COMPAT_BINFMT_ELF=yCONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not setCONFIG_BINFMT_MISC=mCONFIG_IA32_EMULATION=yCONFIG_IA32_AOUT=yCONFIG_COMPAT=yCONFIG_COMPAT_FOR_U64_ALIGNMENT=yCONFIG_SYSVIPC_COMPAT=yCONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=yCONFIG_XFRM_USER=mCONFIG_XFRM_SUB_POLICY=yCONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not setCONFIG_XFRM_IPCOMP=mCONFIG_NET_KEY=yCONFIG_NET_KEY_MIGRATE=yCONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not setCONFIG_IP_FIB_HASH=yCONFIG_IP_PNP=yCONFIG_IP_PNP_DHCP=yCONFIG_IP_PNP_BOOTP=yCONFIG_IP_PNP_RARP=yCONFIG_NET_IPIP=yCONFIG_NET_IPGRE=m
# CONFIG_ARPD is not setCONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not setCONFIG_INET_IPCOMP=mCONFIG_INET_XFRM_TUNNEL=mCONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not setCONFIG_INET_XFRM_MODE_TUNNEL=mCONFIG_INET_XFRM_MODE_BEET=yCONFIG_INET_LRO=yCONFIG_INET_DIAG=mCONFIG_INET_TCP_DIAG=mCONFIG_TCP_CONG_ADVANCED=yCONFIG_TCP_CONG_BIC=y
# CONFIG_TCP_CONG_CUBIC is not setCONFIG_TCP_CONG_WESTWOOD=yCONFIG_TCP_CONG_HTCP=yCONFIG_TCP_CONG_HSTCP=mCONFIG_TCP_CONG_HYBLA=mCONFIG_TCP_CONG_VEGAS=yCONFIG_TCP_CONG_SCALABLE=yCONFIG_TCP_CONG_LP=y
# CONFIG_TCP_CONG_VENO is not setCONFIG_TCP_CONG_YEAH=mCONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not set
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not setCONFIG_DEFAULT_VEGAS=y
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not setCONFIG_DEFAULT_TCP_CONG="vegas"CONFIG_TCP_MD5SIG=yCONFIG_IPV6=mCONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not setCONFIG_IPV6_OPTIMISTIC_DAD=yCONFIG_INET6_AH=m
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not setCONFIG_IPV6_MIP6=m
# CONFIG_INET6_XFRM_TUNNEL is not setCONFIG_INET6_TUNNEL=m
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not setCONFIG_INET6_XFRM_MODE_TUNNEL=m
# CONFIG_INET6_XFRM_MODE_BEET is not setCONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
# CONFIG_IPV6_SIT is not setCONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not setCONFIG_IPV6_MROUTE=yCONFIG_IPV6_PIMSM_V2=yCONFIG_NETLABEL=yCONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not setCONFIG_IP_DCCP=mCONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#CONFIG_IP_DCCP_CCID2_DEBUG=yCONFIG_IP_DCCP_CCID3=yCONFIG_IP_DCCP_CCID3_DEBUG=yCONFIG_IP_DCCP_CCID3_RTO=100CONFIG_IP_DCCP_TFRC_LIB=yCONFIG_IP_DCCP_TFRC_DEBUG=y
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not setCONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not setCONFIG_SCTP_DBG_OBJCNT=y
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not setCONFIG_SCTP_HMAC_MD5=yCONFIG_RDS=yCONFIG_RDS_TCP=mCONFIG_RDS_DEBUG=yCONFIG_TIPC=y
# CONFIG_TIPC_ADVANCED is not setCONFIG_TIPC_DEBUG=yCONFIG_ATM=m
# CONFIG_ATM_CLIP is not set
# CONFIG_ATM_LANE is not setCONFIG_ATM_BR2684=mCONFIG_ATM_BR2684_IPFILTER=yCONFIG_STP=yCONFIG_GARP=y
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not setCONFIG_VLAN_8021Q=yCONFIG_VLAN_8021Q_GVRP=yCONFIG_DECNET=mCONFIG_DECNET_ROUTER=yCONFIG_LLC=y
# CONFIG_LLC2 is not setCONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not setCONFIG_LAPB=mCONFIG_ECONET=mCONFIG_ECONET_AUNUDP=y
# CONFIG_ECONET_NATIVE is not setCONFIG_WAN_ROUTER=mCONFIG_PHONET=mCONFIG_IEEE802154=yCONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#CONFIG_NET_SCH_CBQ=mCONFIG_NET_SCH_HTB=y
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_ATM is not setCONFIG_NET_SCH_PRIO=mCONFIG_NET_SCH_MULTIQ=mCONFIG_NET_SCH_RED=y
# CONFIG_NET_SCH_SFQ is not setCONFIG_NET_SCH_TEQL=yCONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not setCONFIG_NET_SCH_DRR=y
# CONFIG_NET_SCH_INGRESS is not set
#
# Classification
#CONFIG_NET_CLS=yCONFIG_NET_CLS_BASIC=mCONFIG_NET_CLS_TCINDEX=y
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not setCONFIG_NET_CLS_RSVP6=y
# CONFIG_NET_CLS_FLOW is not setCONFIG_NET_CLS_CGROUP=yCONFIG_NET_EMATCH=yCONFIG_NET_EMATCH_STACK=32CONFIG_NET_EMATCH_CMP=y
# CONFIG_NET_EMATCH_NBYTE is not setCONFIG_NET_EMATCH_U32=m
# CONFIG_NET_EMATCH_META is not setCONFIG_NET_EMATCH_TEXT=mCONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not setCONFIG_NET_ACT_GACT=y
# CONFIG_GACT_PROB is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not setCONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
#
# Network testing
#CONFIG_NET_PKTGEN=y
# CONFIG_NET_TCPPROBE is not setCONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not setCONFIG_IRDA=y
#
# IrDA protocols
#CONFIG_IRLAN=mCONFIG_IRNET=mCONFIG_IRCOMM=y
# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#CONFIG_IRDA_CACHE_LAST_LSAP=y
# CONFIG_IRDA_FAST_RR is not setCONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#CONFIG_IRTTY_SIR=y
#
# Dongle support
#CONFIG_DONGLE=yCONFIG_ESI_DONGLE=yCONFIG_ACTISYS_DONGLE=m
# CONFIG_TEKRAM_DONGLE is not setCONFIG_TOIM3232_DONGLE=mCONFIG_LITELINK_DONGLE=yCONFIG_MA600_DONGLE=y
# CONFIG_GIRBIL_DONGLE is not set
# CONFIG_MCP2120_DONGLE is not setCONFIG_OLD_BELKIN_DONGLE=m
# CONFIG_ACT200L_DONGLE is not setCONFIG_KINGSUN_DONGLE=yCONFIG_KSDAZZLE_DONGLE=y
# CONFIG_KS959_DONGLE is not set
#
# FIR device drivers
#CONFIG_USB_IRDA=yCONFIG_SIGMATEL_FIR=mCONFIG_NSC_FIR=mCONFIG_WINBOND_FIR=m
# CONFIG_SMC_IRCC_FIR is not setCONFIG_ALI_FIR=mCONFIG_VLSI_FIR=yCONFIG_VIA_FIR=y
# CONFIG_MCS_FIR is not setCONFIG_BT=m
# CONFIG_BT_L2CAP is not setCONFIG_BT_SCO=m
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not setCONFIG_BT_HCIBTSDIO=mCONFIG_BT_HCIUART=mCONFIG_BT_HCIUART_H4=y
# CONFIG_BT_HCIUART_BCSP is not setCONFIG_BT_HCIUART_LL=y
# CONFIG_BT_HCIBCM203X is not setCONFIG_BT_HCIBPA10X=mCONFIG_BT_HCIBFUSB=m
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
# CONFIG_AF_RXRPC is not setCONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not setCONFIG_RFKILL=mCONFIG_RFKILL_LEDS=yCONFIG_RFKILL_INPUT=y
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=yCONFIG_FIRMWARE_IN_KERNEL=yCONFIG_EXTRA_FIRMWARE=""CONFIG_DEBUG_DRIVER=yCONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not setCONFIG_CONNECTOR=mCONFIG_PARPORT=mCONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not setCONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not setCONFIG_PARPORT_AX88796=mCONFIG_PARPORT_1284=yCONFIG_PARPORT_NOT_PC=yCONFIG_BLK_DEV=yCONFIG_BLK_DEV_FD=yCONFIG_BLK_CPQ_DA=yCONFIG_BLK_CPQ_CISS_DA=mCONFIG_CISS_SCSI_TAPE=y
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not setCONFIG_BLK_DEV_NBD=mCONFIG_BLK_DEV_SX8=yCONFIG_BLK_DEV_UB=yCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not setCONFIG_CDROM_PKTCDVD=mCONFIG_CDROM_PKTCDVD_BUFFERS=8CONFIG_CDROM_PKTCDVD_WCACHE=yCONFIG_ATA_OVER_ETH=y
# CONFIG_VIRTIO_BLK is not setCONFIG_BLK_DEV_HD=y
# CONFIG_MISC_DEVICES is not setCONFIG_TIFM_CORE=yCONFIG_CB710_CORE=mCONFIG_HAVE_IDE=y
#
# SCSI device support
#CONFIG_RAID_ATTRS=mCONFIG_SCSI=yCONFIG_SCSI_DMA=yCONFIG_SCSI_TGT=mCONFIG_SCSI_NETLINK=yCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not setCONFIG_BLK_DEV_SR=yCONFIG_BLK_DEV_SR_VENDOR=y
# CONFIG_CHR_DEV_SG is not setCONFIG_CHR_DEV_SCH=y
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not setCONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=yCONFIG_SCSI_FC_ATTRS=yCONFIG_SCSI_ISCSI_ATTRS=yCONFIG_SCSI_SAS_ATTRS=yCONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_ATA is not setCONFIG_SCSI_SAS_HOST_SMP=yCONFIG_SCSI_SAS_LIBSAS_DEBUG=yCONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not setCONFIG_SCSI_CXGB3_ISCSI=yCONFIG_SCSI_BNX2_ISCSI=yCONFIG_BE2ISCSI=mCONFIG_BLK_DEV_3W_XXXX_RAID=yCONFIG_SCSI_HPSA=m
# CONFIG_SCSI_3W_9XXX is not setCONFIG_SCSI_3W_SAS=m
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not setCONFIG_SCSI_AIC7XXX=yCONFIG_AIC7XXX_CMDS_PER_DEVICE=32CONFIG_AIC7XXX_RESET_DELAY_MS=5000CONFIG_AIC7XXX_DEBUG_ENABLE=yCONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not setCONFIG_SCSI_AIC7XXX_OLD=yCONFIG_SCSI_AIC79XX=yCONFIG_AIC79XX_CMDS_PER_DEVICE=32CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_DEBUG_ENABLE is not setCONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not setCONFIG_SCSI_AIC94XX=mCONFIG_AIC94XX_DEBUG=yCONFIG_SCSI_MVSAS=yCONFIG_SCSI_MVSAS_DEBUG=yCONFIG_SCSI_DPT_I2O=y
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not setCONFIG_MEGARAID_LEGACY=mCONFIG_MEGARAID_SAS=mCONFIG_SCSI_MPT2SAS=mCONFIG_SCSI_MPT2SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS_LOGGING is not setCONFIG_SCSI_HPTIOP=y
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not setCONFIG_LIBFC=yCONFIG_LIBFCOE=yCONFIG_FCOE=mCONFIG_FCOE_FNIC=yCONFIG_SCSI_DMX3191D=mCONFIG_SCSI_EATA=yCONFIG_SCSI_EATA_TAGGED_QUEUE=y
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not setCONFIG_SCSI_EATA_MAX_TAGS=16CONFIG_SCSI_FUTURE_DOMAIN=m
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not setCONFIG_SCSI_INIA100=mCONFIG_SCSI_PPA=mCONFIG_SCSI_IMM=mCONFIG_SCSI_IZIP_EPP16=yCONFIG_SCSI_IZIP_SLOW_CTR=yCONFIG_SCSI_STEX=mCONFIG_SCSI_SYM53C8XX_2=mCONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64CONFIG_SCSI_SYM53C8XX_MMIO=yCONFIG_SCSI_IPR=mCONFIG_SCSI_IPR_TRACE=yCONFIG_SCSI_IPR_DUMP=yCONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
CONFIG_SCSI_DC395x=yCONFIG_SCSI_DC390T=yCONFIG_SCSI_PMCRAID=mCONFIG_SCSI_PM8001=yCONFIG_SCSI_SRP=m
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not setCONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not setCONFIG_ATA_VERBOSE_ERROR=yCONFIG_SATA_PMP=yCONFIG_SATA_AHCI=yCONFIG_SATA_SIL24=mCONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not setCONFIG_ATA_PIIX=yCONFIG_SATA_MV=yCONFIG_SATA_NV=yCONFIG_PDC_ADMA=yCONFIG_SATA_QSTOR=mCONFIG_SATA_PROMISE=mCONFIG_SATA_SX4=yCONFIG_SATA_SIL=yCONFIG_SATA_SIS=m
# CONFIG_SATA_ULI is not setCONFIG_SATA_VIA=y
# CONFIG_SATA_VITESSE is not setCONFIG_SATA_INIC162X=mCONFIG_PATA_ALI=yCONFIG_PATA_AMD=yCONFIG_PATA_ARTOP=mCONFIG_PATA_ATP867X=yCONFIG_PATA_ATIIXP=yCONFIG_PATA_CMD640_PCI=mCONFIG_PATA_CMD64X=mCONFIG_PATA_CS5520=mCONFIG_PATA_CS5530=y
# CONFIG_PATA_CYPRESS is not setCONFIG_PATA_EFAR=y
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not setCONFIG_PATA_HPT3X2N=yCONFIG_PATA_HPT3X3=yCONFIG_PATA_HPT3X3_DMA=yCONFIG_PATA_IT821X=yCONFIG_PATA_IT8213=mCONFIG_PATA_JMICRON=mCONFIG_PATA_TRIFLEX=yCONFIG_PATA_MARVELL=m
# CONFIG_PATA_MPIIX is not setCONFIG_PATA_OLDPIIX=yCONFIG_PATA_NETCELL=y
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not setCONFIG_PATA_NS87415=yCONFIG_PATA_OPTI=m
# CONFIG_PATA_OPTIDMA is not setCONFIG_PATA_PDC2027X=yCONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not setCONFIG_PATA_RZ1000=yCONFIG_PATA_SC1200=y
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not setCONFIG_PATA_SIS=mCONFIG_PATA_TOSHIBA=yCONFIG_PATA_VIA=yCONFIG_PATA_WINBOND=y
# CONFIG_PATA_PLATFORM is not setCONFIG_PATA_SCH=mCONFIG_MD=yCONFIG_BLK_DEV_MD=m
# CONFIG_MD_LINEAR is not setCONFIG_MD_RAID0=mCONFIG_MD_RAID1=mCONFIG_MD_RAID10=mCONFIG_MD_RAID456=m
# CONFIG_MULTICORE_RAID456 is not setCONFIG_MD_RAID6_PQ=mCONFIG_ASYNC_RAID6_TEST=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not setCONFIG_BLK_DEV_DM=mCONFIG_DM_DEBUG=yCONFIG_DM_CRYPT=m
# CONFIG_DM_SNAPSHOT is not setCONFIG_DM_MIRROR=mCONFIG_DM_LOG_USERSPACE=mCONFIG_DM_ZERO=mCONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_QL is not setCONFIG_DM_MULTIPATH_ST=m
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks. #
#
# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not setCONFIG_IEEE1394=yCONFIG_IEEE1394_OHCI1394=yCONFIG_IEEE1394_PCILYNX=mCONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_RAWIO is not setCONFIG_IEEE1394_VIDEO1394=mCONFIG_IEEE1394_DV1394=mCONFIG_IEEE1394_VERBOSEDEBUG=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not setCONFIG_NETDEVICES=yCONFIG_IFB=mCONFIG_DUMMY=mCONFIG_BONDING=mCONFIG_MACVLAN=m
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not setCONFIG_ARCNET=m
# CONFIG_ARCNET_1201 is not setCONFIG_ARCNET_1051=mCONFIG_ARCNET_RAW=mCONFIG_ARCNET_CAP=m
# CONFIG_ARCNET_COM90xx is not set
CONFIG_ARCNET_COM90xxIO=mCONFIG_ARCNET_RIM_I=mCONFIG_ARCNET_COM20020=m
# CONFIG_ARCNET_COM20020_PCI is not setCONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set CONFIG_DAVICOM_PHY=y
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set CONFIG_CICADA_PHY=y
# CONFIG_VITESSE_PHY is not set CONFIG_SMSC_PHY=mCONFIG_BROADCOM_PHY=mCONFIG_ICPLUS_PHY=yCONFIG_REALTEK_PHY=mCONFIG_NATIONAL_PHY=mCONFIG_STE10XP=mCONFIG_LSI_ET1011C_PHY=y CONFIG_FIXED_PHY=yCONFIG_MDIO_BITBANG=y
# CONFIG_MDIO_GPIO is not set CONFIG_NET_ETHERNET=yCONFIG_MII=yCONFIG_HAPPYMEAL=yCONFIG_SUNGEM=mCONFIG_CASSINI=m
# CONFIG_NET_VENDOR_3COM is not set CONFIG_VORTEX=yCONFIG_ENC28J60=y CONFIG_ENC28J60_WRITEVERIFY=y CONFIG_ETHOC=mCONFIG_DNET=mCONFIG_NET_TULIP=yCONFIG_DE2104X=mCONFIG_DE2104X_DSL=0
# CONFIG_TULIP is not setCONFIG_DE4X5=m
# CONFIG_WINBOND_840 is not set CONFIG_DM9102=mCONFIG_ULI526X=mCONFIG_PCMCIA_XIRCOM=mCONFIG_HP100=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=yCONFIG_PCNET32=y
# CONFIG_AMD8111_ETH is not set CONFIG_ADAPTEC_STARFIRE=m
# CONFIG_B44 is not setCONFIG_FORCEDETH=yCONFIG_FORCEDETH_NAPI=yCONFIG_E100=yCONFIG_FEALNX=yCONFIG_NATSEMI=mCONFIG_NE2K_PCI=yCONFIG_8139CP=mCONFIG_8139TOO=yCONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set CONFIG_8139TOO_8129=y CONFIG_8139_OLD_RX_RESET=y
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set CONFIG_SMSC9420=mCONFIG_SUNDANCE=y
# CONFIG_SUNDANCE_MMIO is not set
# CONFIG_TLAN is not setCONFIG_KS8842=m
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set CONFIG_SC92031=yCONFIG_NET_POCKET=y
# CONFIG_ATP is not set
# CONFIG_DE600 is not setCONFIG_DE620=mCONFIG_ATL2=yCONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not setCONFIG_E1000=mCONFIG_E1000E=yCONFIG_IP1000=m
# CONFIG_IGB is not set
# CONFIG_IGBVF is not setCONFIG_NS83820=yCONFIG_HAMACHI=mCONFIG_YELLOWFIN=mCONFIG_R8169=y
# CONFIG_R8169_VLAN is not set
# CONFIG_SIS190 is not setCONFIG_SKGE=y
# CONFIG_SKGE_DEBUG is not set CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set CONFIG_VIA_VELOCITY=mCONFIG_TIGON3=yCONFIG_BNX2=yCONFIG_CNIC=yCONFIG_QLA3XXX=mCONFIG_ATL1=mCONFIG_ATL1E=yCONFIG_ATL1C=m
# CONFIG_JME is not set CONFIG_NETDEV_10000=yCONFIG_MDIO=y
# CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y CONFIG_CHELSIO_T3=yCONFIG_ENIC=yCONFIG_IXGBE=mCONFIG_IXGB=y
# CONFIG_S2IO is not setCONFIG_MYRI10GE=mCONFIG_NIU=yCONFIG_MLX4_EN=yCONFIG_MLX4_CORE=yCONFIG_MLX4_DEBUG=y
# CONFIG_TEHUTI is not setCONFIG_BNX2X=mCONFIG_QLGE=yCONFIG_SFC=yCONFIG_BE2NET=yCONFIG_TR=yCONFIG_IBMOL=yCONFIG_3C359=yCONFIG_TMS380TR=yCONFIG_TMSPCI=m
# CONFIG_ABYSS is not set
# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers #
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not setCONFIG_USB_KAWETH=mCONFIG_USB_PEGASUS=m
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not setCONFIG_USB_HSO=m
# CONFIG_USB_CDC_PHONET is not setCONFIG_WAN=y
# CONFIG_HDLC is not setCONFIG_DLCI=mCONFIG_DLCI_MAX=8CONFIG_WAN_ROUTER_DRIVERS=mCONFIG_CYCLADES_SYNC=mCONFIG_CYCLOMX_X25=yCONFIG_SBNI=m
# CONFIG_SBNI_MULTILINE is not setCONFIG_ATM_DRIVERS=yCONFIG_ATM_DUMMY=mCONFIG_ATM_TCP=mCONFIG_ATM_LANAI=mCONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not setCONFIG_ATM_ENI_TUNE_BURST=y
# CONFIG_ATM_ENI_BURST_TX_16W is not setCONFIG_ATM_ENI_BURST_TX_8W=y
# CONFIG_ATM_ENI_BURST_TX_4W is not setCONFIG_ATM_ENI_BURST_TX_2W=yCONFIG_ATM_ENI_BURST_RX_16W=y
# CONFIG_ATM_ENI_BURST_RX_8W is not set
# CONFIG_ATM_ENI_BURST_RX_4W is not setCONFIG_ATM_ENI_BURST_RX_2W=yCONFIG_ATM_FIRESTREAM=m
# CONFIG_ATM_ZATM is not setCONFIG_ATM_IDT77252=mCONFIG_ATM_IDT77252_DEBUG=yCONFIG_ATM_IDT77252_RCV_ALL=yCONFIG_ATM_IDT77252_USE_SUNI=yCONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not setCONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not setCONFIG_ATM_HE=mCONFIG_ATM_HE_USE_SUNI=yCONFIG_ATM_SOLOS=mCONFIG_IEEE802154_DRIVERS=y
# CONFIG_IEEE802154_FAKEHARD is not setCONFIG_FDDI=m
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not setCONFIG_HIPPI=yCONFIG_ROADRUNNER=yCONFIG_ROADRUNNER_LARGE_RINGS=y
# CONFIG_PLIP is not setCONFIG_PPP=mCONFIG_PPP_MULTILINK=y
# CONFIG_PPP_FILTER is not setCONFIG_PPP_ASYNC=mCONFIG_PPP_SYNC_TTY=mCONFIG_PPP_DEFLATE=mCONFIG_PPP_BSDCOMP=mCONFIG_PPP_MPPE=m
# CONFIG_PPPOE is not set
# CONFIG_PPPOATM is not setCONFIG_PPPOL2TP=mCONFIG_SLIP=y
# CONFIG_SLIP_COMPRESSED is not setCONFIG_SLHC=mCONFIG_SLIP_SMART=yCONFIG_SLIP_MODE_SLIP6=yCONFIG_NET_FC=yCONFIG_NETCONSOLE=yCONFIG_NETCONSOLE_DYNAMIC=yCONFIG_NETPOLL=yCONFIG_NETPOLL_TRAP=yCONFIG_NET_POLL_CONTROLLER=yCONFIG_VIRTIO_NET=y
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not setCONFIG_PHONE=yCONFIG_PHONE_IXJ=m
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=yCONFIG_INPUT_POLLDEV=yCONFIG_INPUT_SPARSEKMAP=m
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=yCONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ADP5520=m
# CONFIG_KEYBOARD_ADP5588 is not setCONFIG_KEYBOARD_ATKBD=yCONFIG_QT2160=mCONFIG_KEYBOARD_LKKBD=mCONFIG_KEYBOARD_GPIO=mCONFIG_KEYBOARD_MATRIX=yCONFIG_KEYBOARD_LM8323=yCONFIG_KEYBOARD_MAX7359=mCONFIG_KEYBOARD_NEWTON=y
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not setCONFIG_KEYBOARD_SUNKBD=yCONFIG_KEYBOARD_XTKBD=y
# CONFIG_INPUT_MOUSE is not setCONFIG_INPUT_JOYSTICK=yCONFIG_JOYSTICK_ANALOG=yCONFIG_JOYSTICK_A3D=yCONFIG_JOYSTICK_ADI=yCONFIG_JOYSTICK_COBRA=yCONFIG_JOYSTICK_GF2K=m
# CONFIG_JOYSTICK_GRIP is not setCONFIG_JOYSTICK_GRIP_MP=y
# CONFIG_JOYSTICK_GUILLEMOT is not setCONFIG_JOYSTICK_INTERACT=mCONFIG_JOYSTICK_SIDEWINDER=yCONFIG_JOYSTICK_TMDC=y
# CONFIG_JOYSTICK_IFORCE is not setCONFIG_JOYSTICK_WARRIOR=y
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not setCONFIG_JOYSTICK_SPACEBALL=yCONFIG_JOYSTICK_STINGER=yCONFIG_JOYSTICK_TWIDJOY=y
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_DB9 is not setCONFIG_JOYSTICK_GAMECON=m
# CONFIG_JOYSTICK_TURBOGRAFX is not setCONFIG_JOYSTICK_JOYDUMP=m
# CONFIG_JOYSTICK_XPAD is not setCONFIG_JOYSTICK_WALKERA0701=m
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not setCONFIG_INPUT_MISC=yCONFIG_INPUT_APANEL=mCONFIG_INPUT_ATI_REMOTE=mCONFIG_INPUT_ATI_REMOTE2=mCONFIG_INPUT_KEYSPAN_REMOTE=yCONFIG_INPUT_POWERMATE=yCONFIG_INPUT_YEALINK=yCONFIG_INPUT_CM109=m
# CONFIG_INPUT_UINPUT is not setCONFIG_INPUT_PCF50633_PMU=m
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not setCONFIG_INPUT_WM831X_ON=y
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not setCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=yCONFIG_SERIO_ALTERA_PS2=mCONFIG_GAMEPORT=yCONFIG_GAMEPORT_NS558=mCONFIG_GAMEPORT_L4=yCONFIG_GAMEPORT_EMU10K1=yCONFIG_GAMEPORT_FM801=m
#
# Character devices
#CONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=yCONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not setCONFIG_NOZOMI=m
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_SERIAL_8250_PCI=mCONFIG_SERIAL_8250_NR_UARTS=4CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=yCONFIG_SERIAL_8250_MANY_PORTS=yCONFIG_SERIAL_8250_SHARE_IRQ=yCONFIG_SERIAL_8250_DETECT_IRQ=yCONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#CONFIG_SERIAL_MAX3100=mCONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_CONSOLE_POLL=yCONFIG_SERIAL_JSM=mCONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not setCONFIG_PRINTER=mCONFIG_LP_CONSOLE=y
# CONFIG_PPDEV is not setCONFIG_HVC_DRIVER=yCONFIG_VIRTIO_CONSOLE=yCONFIG_IPMI_HANDLER=mCONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not setCONFIG_IPMI_SI=m
# CONFIG_IPMI_WATCHDOG is not setCONFIG_IPMI_POWEROFF=mCONFIG_HW_RANDOM=yCONFIG_HW_RANDOM_TIMERIOMEM=mCONFIG_HW_RANDOM_INTEL=mCONFIG_HW_RANDOM_AMD=mCONFIG_HW_RANDOM_VIA=mCONFIG_HW_RANDOM_VIRTIO=m
# CONFIG_NVRAM is not set
# CONFIG_RTC is not setCONFIG_GEN_RTC=mCONFIG_GEN_RTC_X=y
# CONFIG_R3964 is not setCONFIG_APPLICOM=mCONFIG_MWAVE=m
# CONFIG_PC8736x_GPIO is not setCONFIG_RAW_DRIVER=mCONFIG_MAX_RAW_DEVS=256CONFIG_HANGCHECK_TIMER=mCONFIG_TCG_TPM=mCONFIG_TCG_NSC=m
# CONFIG_TCG_ATMEL is not setCONFIG_TELCLOCK=mCONFIG_DEVPORT=yCONFIG_I2C=yCONFIG_I2C_BOARDINFO=yCONFIG_I2C_COMPAT=yCONFIG_I2C_CHARDEV=mCONFIG_I2C_HELPER_AUTO=yCONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not setCONFIG_I2C_ALI1563=mCONFIG_I2C_ALI15X3=m
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not setCONFIG_I2C_I801=mCONFIG_I2C_ISCH=yCONFIG_I2C_PIIX4=mCONFIG_I2C_NFORCE2=yCONFIG_I2C_SIS5595=yCONFIG_I2C_SIS630=yCONFIG_I2C_SIS96X=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip) #CONFIG_I2C_GPIO=yCONFIG_I2C_OCORES=m
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#CONFIG_I2C_PARPORT=mCONFIG_I2C_PARPORT_LIGHT=mCONFIG_I2C_TAOS_EVM=yCONFIG_I2C_TINY_USB=m
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#CONFIG_SENSORS_TSL2550=yCONFIG_I2C_DEBUG_CORE=yCONFIG_I2C_DEBUG_ALGO=y
# CONFIG_I2C_DEBUG_BUS is not setCONFIG_I2C_DEBUG_CHIP=yCONFIG_SPI=yCONFIG_SPI_DEBUG=yCONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#CONFIG_SPI_BITBANG=mCONFIG_SPI_BUTTERFLY=m
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_XILINX is not setCONFIG_SPI_DESIGNWARE=yCONFIG_SPI_DW_PCI=y
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not setCONFIG_SPI_TLE62X0=m
#
# PPS support
#CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not setCONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=yCONFIG_GPIOLIB=yCONFIG_DEBUG_GPIO=yCONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO expanders:
#
#
# I2C GPIO expanders:
#CONFIG_GPIO_MAX732X=y
# CONFIG_GPIO_PCA953X is not setCONFIG_GPIO_PCF857X=y
# CONFIG_GPIO_WM831X is not setCONFIG_GPIO_ADP5520=m
# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
#CONFIG_GPIO_CS5535=y
# CONFIG_GPIO_BT8XX is not setCONFIG_GPIO_LANGWELL=y
#
# SPI GPIO expanders:
#CONFIG_GPIO_MAX7301=mCONFIG_GPIO_MCP23S08=m
# CONFIG_GPIO_MC33880 is not set
#
# AC97 GPIO expanders:
#CONFIG_GPIO_UCB1400=yCONFIG_W1=m
# CONFIG_W1_CON is not set
#
# 1-wire Bus Masters
#CONFIG_W1_MASTER_MATROX=m
# CONFIG_W1_MASTER_DS2490 is not setCONFIG_W1_MASTER_DS2482=m
# CONFIG_W1_MASTER_GPIO is not set
#
# 1-wire Slaves
#CONFIG_W1_SLAVE_THERM=m
# CONFIG_W1_SLAVE_SMEM is not setCONFIG_W1_SLAVE_DS2431=m
# CONFIG_W1_SLAVE_DS2433 is not setCONFIG_W1_SLAVE_DS2760=mCONFIG_W1_SLAVE_BQ27000=mCONFIG_POWER_SUPPLY=mCONFIG_POWER_SUPPLY_DEBUG=yCONFIG_PDA_POWER=m
# CONFIG_WM831X_BACKUP is not setCONFIG_WM831X_POWER=mCONFIG_BATTERY_DS2760=mCONFIG_BATTERY_DS2782=m
# CONFIG_BATTERY_BQ27x00 is not setCONFIG_BATTERY_DA9030=mCONFIG_BATTERY_MAX17040=mCONFIG_CHARGER_PCF50633=mCONFIG_HWMON=yCONFIG_HWMON_VID=yCONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not setCONFIG_SENSORS_ABITUGURU3=mCONFIG_SENSORS_AD7414=yCONFIG_SENSORS_AD7418=yCONFIG_SENSORS_ADCXX=m
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not setCONFIG_SENSORS_ADM1031=yCONFIG_SENSORS_ADM9240=yCONFIG_SENSORS_ADT7462=y
# CONFIG_SENSORS_ADT7470 is not setCONFIG_SENSORS_ADT7473=yCONFIG_SENSORS_ADT7475=yCONFIG_SENSORS_K8TEMP=mCONFIG_SENSORS_K10TEMP=mCONFIG_SENSORS_ASB100=mCONFIG_SENSORS_ATXP1=m
# CONFIG_SENSORS_DS1621 is not setCONFIG_SENSORS_I5K_AMB=yCONFIG_SENSORS_F71805F=mCONFIG_SENSORS_F71882FG=m
# CONFIG_SENSORS_F75375S is not setCONFIG_SENSORS_FSCHMD=mCONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not setCONFIG_SENSORS_IBMAEM=mCONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_IT87 is not setCONFIG_SENSORS_LM63=yCONFIG_SENSORS_LM70=mCONFIG_SENSORS_LM73=yCONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not setCONFIG_SENSORS_LM78=mCONFIG_SENSORS_LM80=yCONFIG_SENSORS_LM83=mCONFIG_SENSORS_LM85=m
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LTC4215 is not setCONFIG_SENSORS_LTC4245=yCONFIG_SENSORS_LM95241=yCONFIG_SENSORS_MAX1111=m
# CONFIG_SENSORS_MAX1619 is not setCONFIG_SENSORS_MAX6650=mCONFIG_SENSORS_PC87360=yCONFIG_SENSORS_PC87427=mCONFIG_SENSORS_PCF8591=yCONFIG_SENSORS_SHT15=mCONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not setCONFIG_SENSORS_SMSC47M192=mCONFIG_SENSORS_SMSC47B397=yCONFIG_SENSORS_ADS7828=mCONFIG_SENSORS_AMC6821=m
# CONFIG_SENSORS_THMC50 is not setCONFIG_SENSORS_TMP401=mCONFIG_SENSORS_TMP421=yCONFIG_SENSORS_VIA_CPUTEMP=yCONFIG_SENSORS_VIA686A=y
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not setCONFIG_SENSORS_W83781D=yCONFIG_SENSORS_W83791D=m
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not setCONFIG_SENSORS_W83L786NG=yCONFIG_SENSORS_WM831X=yCONFIG_SENSORS_HDAPS=mCONFIG_SENSORS_LIS3_SPI=m
# CONFIG_SENSORS_LIS3_I2C is not setCONFIG_SENSORS_APPLESMC=yCONFIG_SENSORS_MC13783_ADC=mCONFIG_THERMAL=mCONFIG_THERMAL_HWMON=yCONFIG_WATCHDOG=yCONFIG_WATCHDOG_NOWAYOUT=y
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not setCONFIG_WM831X_WATCHDOG=mCONFIG_ACQUIRE_WDT=m
# CONFIG_ADVANTECH_WDT is not setCONFIG_ALIM1535_WDT=yCONFIG_ALIM7101_WDT=yCONFIG_SC520_WDT=mCONFIG_IB700_WDT=yCONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not setCONFIG_I6300ESB_WDT=yCONFIG_ITCO_WDT=y
# CONFIG_ITCO_VENDOR_SUPPORT is not setCONFIG_IT8712F_WDT=mCONFIG_IT87_WDT=mCONFIG_HP_WATCHDOG=y
# CONFIG_SC1200_WDT is not setCONFIG_PC87413_WDT=mCONFIG_60XX_WDT=y
# CONFIG_SBC8360_WDT is not setCONFIG_CPU5_WDT=m
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not setCONFIG_W83877F_WDT=yCONFIG_W83977F_WDT=m
# CONFIG_MACHZ_WDT is not setCONFIG_SBC_EPX_C3_WATCHDOG=m
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not setCONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#CONFIG_USBPCWATCHDOG=yCONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#CONFIG_SSB=mCONFIG_SSB_SPROM=yCONFIG_SSB_PCIHOST_POSSIBLE=yCONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not setCONFIG_SSB_SDIOHOST_POSSIBLE=yCONFIG_SSB_SDIOHOST=yCONFIG_SSB_SILENT=yCONFIG_SSB_DRIVER_PCICORE_POSSIBLE=yCONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#CONFIG_MFD_CORE=y
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not setCONFIG_UCB1400_CORE=mCONFIG_TPS65010=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not setCONFIG_PMIC_DA903X=yCONFIG_PMIC_ADP5520=yCONFIG_MFD_WM8400=yCONFIG_MFD_WM831X=yCONFIG_MFD_PCF50633=mCONFIG_MFD_MC13783=mCONFIG_PCF50633_ADC=mCONFIG_PCF50633_GPIO=m
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_88PM8607 is not setCONFIG_AB4500_CORE=m
# CONFIG_REGULATOR is not setCONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not setCONFIG_DVB_CORE=mCONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#CONFIG_IR_CORE=mCONFIG_VIDEO_IR=mCONFIG_MEDIA_ATTACH=yCONFIG_MEDIA_TUNER=mCONFIG_MEDIA_TUNER_CUSTOMISE=y
# CONFIG_MEDIA_TUNER_SIMPLE is not setCONFIG_MEDIA_TUNER_TDA8290=mCONFIG_MEDIA_TUNER_TDA827X=mCONFIG_MEDIA_TUNER_TDA18271=mCONFIG_MEDIA_TUNER_TDA9887=m
# CONFIG_MEDIA_TUNER_TEA5761 is not set
# CONFIG_MEDIA_TUNER_TEA5767 is not setCONFIG_MEDIA_TUNER_MT20XX=mCONFIG_MEDIA_TUNER_MT2060=m
# CONFIG_MEDIA_TUNER_MT2266 is not setCONFIG_MEDIA_TUNER_MT2131=m
# CONFIG_MEDIA_TUNER_QT1010 is not set
# CONFIG_MEDIA_TUNER_XC2028 is not setCONFIG_MEDIA_TUNER_XC5000=mCONFIG_MEDIA_TUNER_MXL5005S=mCONFIG_MEDIA_TUNER_MXL5007T=mCONFIG_MEDIA_TUNER_MC44S803=mCONFIG_DVB_MAX_ADAPTERS=8CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_CAPTURE_DRIVERS is not setCONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#CONFIG_AGP=mCONFIG_AGP_AMD64=mCONFIG_AGP_INTEL=m
# CONFIG_AGP_SIS is not setCONFIG_AGP_VIA=m
# CONFIG_VGA_ARB is not setCONFIG_DRM=mCONFIG_DRM_KMS_HELPER=mCONFIG_DRM_TTM=mCONFIG_DRM_TDFX=mCONFIG_DRM_R128=mCONFIG_DRM_RADEON=mCONFIG_DRM_I810=m
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not setCONFIG_DRM_SIS=mCONFIG_DRM_VIA=m
# CONFIG_DRM_SAVAGE is not setCONFIG_VGASTATE=m
# CONFIG_VIDEO_OUTPUT_CONTROL is not setCONFIG_FB=mCONFIG_FIRMWARE_EDID=yCONFIG_FB_DDC=m
# CONFIG_FB_BOOT_VESA_SUPPORT is not setCONFIG_FB_CFB_FILLRECT=mCONFIG_FB_CFB_COPYAREA=mCONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not setCONFIG_FB_SYS_FILLRECT=mCONFIG_FB_SYS_COPYAREA=mCONFIG_FB_SYS_IMAGEBLIT=mCONFIG_FB_FOREIGN_ENDIAN=y
# CONFIG_FB_BOTH_ENDIAN is not setCONFIG_FB_BIG_ENDIAN=y
# CONFIG_FB_LITTLE_ENDIAN is not setCONFIG_FB_SYS_FOPS=mCONFIG_FB_DEFERRED_IO=yCONFIG_FB_HECUBA=mCONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not setCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#CONFIG_FB_PM2=mCONFIG_FB_PM2_FIFO_DISCONNECT=yCONFIG_FB_CYBER2000=mCONFIG_FB_ARC=m
# CONFIG_FB_UVESA is not setCONFIG_FB_N411=mCONFIG_FB_HGA=mCONFIG_FB_HGA_ACCEL=yCONFIG_FB_S1D13XXX=m
# CONFIG_FB_NVIDIA is not setCONFIG_FB_RIVA=mCONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
# CONFIG_FB_RIVA_BACKLIGHT is not setCONFIG_FB_LE80578=mCONFIG_FB_CARILLO_RANCH=mCONFIG_FB_INTEL=mCONFIG_FB_INTEL_DEBUG=yCONFIG_FB_INTEL_I2C=yCONFIG_FB_MATROX=m
# CONFIG_FB_MATROX_MILLENIUM is not setCONFIG_FB_MATROX_MYSTIQUE=yCONFIG_FB_MATROX_G=yCONFIG_FB_MATROX_I2C=mCONFIG_FB_MATROX_MAVEN=mCONFIG_FB_ATY128=m
# CONFIG_FB_ATY128_BACKLIGHT is not set
# CONFIG_FB_ATY is not setCONFIG_FB_S3=mCONFIG_FB_SAVAGE=m
# CONFIG_FB_SAVAGE_I2C is not set
# CONFIG_FB_SAVAGE_ACCEL is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not setCONFIG_FB_NEOMAGIC=mCONFIG_FB_KYRO=m
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not setCONFIG_FB_VT8623=mCONFIG_FB_TRIDENT=m
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not setCONFIG_FB_CARMINE=m
# CONFIG_FB_CARMINE_DRAM_EVAL is not setCONFIG_CARMINE_DRAM_CUSTOM=yCONFIG_FB_GEODE=yCONFIG_FB_GEODE_LX=mCONFIG_FB_GEODE_GX=mCONFIG_FB_GEODE_GX1=mCONFIG_FB_TMIO=mCONFIG_FB_TMIO_ACCELL=yCONFIG_FB_METRONOME=mCONFIG_FB_MB862XX=mCONFIG_FB_MB862XX_PCI_GDC=yCONFIG_FB_BROADSHEET=mCONFIG_BACKLIGHT_LCD_SUPPORT=yCONFIG_LCD_CLASS_DEVICE=yCONFIG_LCD_LMS283GF05=yCONFIG_LCD_LTV350QV=m
# CONFIG_LCD_ILI9320 is not setCONFIG_LCD_TDO24M=m
# CONFIG_LCD_VGG2432A4 is not set
# CONFIG_LCD_PLATFORM is not setCONFIG_BACKLIGHT_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_GENERIC is not setCONFIG_BACKLIGHT_PROGEAR=mCONFIG_BACKLIGHT_CARILLO_RANCH=mCONFIG_BACKLIGHT_DA903X=mCONFIG_BACKLIGHT_MBP_NVIDIA=mCONFIG_BACKLIGHT_SAHARA=m
# CONFIG_BACKLIGHT_WM831X is not setCONFIG_BACKLIGHT_ADP5520=m
#
# Display device support
#CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not setCONFIG_DUMMY_CONSOLE=yCONFIG_LOGO=yCONFIG_LOGO_LINUX_MONO=yCONFIG_LOGO_LINUX_VGA16=yCONFIG_LOGO_LINUX_CLUT224=yCONFIG_SOUND=yCONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not setCONFIG_SND=mCONFIG_SND_TIMER=mCONFIG_SND_PCM=mCONFIG_SND_HWDEP=mCONFIG_SND_RAWMIDI=mCONFIG_SND_JACK=yCONFIG_SND_SEQUENCER=mCONFIG_SND_SEQ_DUMMY=mCONFIG_SND_OSSEMUL=yCONFIG_SND_MIXER_OSS=mCONFIG_SND_PCM_OSS=mCONFIG_SND_PCM_OSS_PLUGINS=yCONFIG_SND_SEQUENCER_OSS=yCONFIG_SND_HRTIMER=mCONFIG_SND_SEQ_HRTIMER_DEFAULT=yCONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not setCONFIG_SND_VERBOSE_PROCFS=yCONFIG_SND_VERBOSE_PRINTK=yCONFIG_SND_DEBUG=yCONFIG_SND_DEBUG_VERBOSE=yCONFIG_SND_PCM_XRUN_DEBUG=yCONFIG_SND_VMASTER=yCONFIG_SND_DMA_SGBUF=yCONFIG_SND_RAWMIDI_SEQ=mCONFIG_SND_OPL3_LIB_SEQ=m
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not setCONFIG_SND_EMU10K1_SEQ=mCONFIG_SND_MPU401_UART=mCONFIG_SND_OPL3_LIB=mCONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DRIVERS is not setCONFIG_SND_SB_COMMON=mCONFIG_SND_SB16_DSP=mCONFIG_SND_PCI=yCONFIG_SND_AD1889=mCONFIG_SND_ALS300=mCONFIG_SND_ALS4000=mCONFIG_SND_ALI5451=mCONFIG_SND_ATIIXP=mCONFIG_SND_ATIIXP_MODEM=mCONFIG_SND_AU8810=mCONFIG_SND_AU8820=m
# CONFIG_SND_AU8830 is not setCONFIG_SND_AW2=mCONFIG_SND_AZT3328=m
# CONFIG_SND_BT87X is not setCONFIG_SND_CA0106=mCONFIG_SND_CMIPCI=mCONFIG_SND_OXYGEN_LIB=mCONFIG_SND_OXYGEN=m
# CONFIG_SND_CS4281 is not setCONFIG_SND_CS46XX=mCONFIG_SND_CS46XX_NEW_DSP=yCONFIG_SND_CS5530=mCONFIG_SND_CS5535AUDIO=mCONFIG_SND_CTXFI=mCONFIG_SND_DARLA20=mCONFIG_SND_GINA20=mCONFIG_SND_LAYLA20=mCONFIG_SND_DARLA24=mCONFIG_SND_GINA24=mCONFIG_SND_LAYLA24=mCONFIG_SND_MONA=mCONFIG_SND_MIA=mCONFIG_SND_ECHO3G=m
# CONFIG_SND_INDIGO is not setCONFIG_SND_INDIGOIO=mCONFIG_SND_INDIGODJ=m
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not setCONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not setCONFIG_SND_ENS1370=m
# CONFIG_SND_ENS1371 is not setCONFIG_SND_ES1938=mCONFIG_SND_ES1968=m
# CONFIG_SND_FM801 is not setCONFIG_SND_HDA_INTEL=mCONFIG_SND_HDA_HWDEP=yCONFIG_SND_HDA_RECONFIG=y
# CONFIG_SND_HDA_INPUT_BEEP is not setCONFIG_SND_HDA_INPUT_JACK=yCONFIG_SND_HDA_PATCH_LOADER=y
# CONFIG_SND_HDA_CODEC_REALTEK is not setCONFIG_SND_HDA_CODEC_ANALOG=yCONFIG_SND_HDA_CODEC_SIGMATEL=yCONFIG_SND_HDA_CODEC_VIA=yCONFIG_SND_HDA_CODEC_ATIHDMI=yCONFIG_SND_HDA_CODEC_NVHDMI=yCONFIG_SND_HDA_CODEC_INTELHDMI=yCONFIG_SND_HDA_ELD=yCONFIG_SND_HDA_CODEC_CIRRUS=yCONFIG_SND_HDA_CODEC_CONEXANT=yCONFIG_SND_HDA_CODEC_CA0110=y
# CONFIG_SND_HDA_CODEC_CMEDIA is not setCONFIG_SND_HDA_CODEC_SI3054=yCONFIG_SND_HDA_GENERIC=yCONFIG_SND_HDA_POWER_SAVE=yCONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDSP is not setCONFIG_SND_HDSPM=mCONFIG_SND_HIFIER=m
# CONFIG_SND_ICE1712 is not setCONFIG_SND_ICE1724=mCONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not setCONFIG_SND_KORG1212=m
# CONFIG_SND_LX6464ES is not setCONFIG_SND_MAESTRO3=m
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not setCONFIG_SND_PCXHR=m
# CONFIG_SND_RIPTIDE is not setCONFIG_SND_RME32=mCONFIG_SND_RME96=mCONFIG_SND_RME9652=m
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not setCONFIG_SND_VIA82XX=m
# CONFIG_SND_VIA82XX_MODEM is not setCONFIG_SND_VIRTUOSO=m
# CONFIG_SND_VX222 is not setCONFIG_SND_YMFPCI=m
# CONFIG_SND_SPI is not setCONFIG_SND_USB=yCONFIG_SND_USB_AUDIO=mCONFIG_SND_USB_USX2Y=mCONFIG_SND_USB_CAIAQ=mCONFIG_SND_USB_CAIAQ_INPUT=y
# CONFIG_SND_USB_US122L is not setCONFIG_SND_SOC=mCONFIG_SND_SOC_I2C_AND_SPI=m
# CONFIG_SND_SOC_ALL_CODECS is not setCONFIG_SOUND_PRIME=yCONFIG_SOUND_OSS=y
# CONFIG_SOUND_TRACEINIT is not setCONFIG_SOUND_DMAP=yCONFIG_SOUND_VMIDI=y
# CONFIG_SOUND_TRIX is not setCONFIG_SOUND_MSS=m
# CONFIG_SOUND_MPU401 is not set
# CONFIG_SOUND_PAS is not setCONFIG_SOUND_PSS=mCONFIG_PSS_MIXER=yCONFIG_SOUND_SB=y
# CONFIG_SOUND_YM3812 is not set
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_AEDSP16 is not setCONFIG_SOUND_KAHLUA=yCONFIG_AC97_BUS=mCONFIG_HID_SUPPORT=yCONFIG_HID=mCONFIG_HIDRAW=y
#
# USB Input Devices
#
# CONFIG_USB_HID is not set
# CONFIG_HID_PID is not set
#
# USB HID Boot Protocol drivers
#CONFIG_USB_KBD=yCONFIG_USB_MOUSE=y
#
# Special HID drivers
#CONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=yCONFIG_USB_DEBUG=yCONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not setCONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not setCONFIG_USB_OTG_WHITELIST=yCONFIG_USB_OTG_BLACKLIST_HUB=yCONFIG_USB_MON=yCONFIG_USB_WUSB=m
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#CONFIG_USB_C67X00_HCD=yCONFIG_USB_XHCI_HCD=mCONFIG_USB_XHCI_HCD_DEBUGGING=yCONFIG_USB_EHCI_HCD=yCONFIG_USB_EHCI_ROOT_HUB_TT=yCONFIG_USB_EHCI_TT_NEWSCHED=yCONFIG_USB_OXU210HP_HCD=mCONFIG_USB_ISP116X_HCD=mCONFIG_USB_ISP1760_HCD=yCONFIG_USB_ISP1362_HCD=mCONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=yCONFIG_USB_SL811_HCD=mCONFIG_USB_R8A66597_HCD=mCONFIG_USB_HWA_HCD=m
#
# USB Device Class drivers
#CONFIG_USB_ACM=mCONFIG_USB_PRINTER=yCONFIG_USB_WDM=yCONFIG_USB_TMC=y
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #
#
# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set CONFIG_USB_STORAGE_USBAT=m CONFIG_USB_STORAGE_SDDR09=m CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y CONFIG_USB_STORAGE_ALAUDA=m # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#CONFIG_USB_MDC800=y
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not setCONFIG_USB_SERIAL=mCONFIG_USB_EZUSB=yCONFIG_USB_SERIAL_GENERIC=yCONFIG_USB_SERIAL_AIRCABLE=mCONFIG_USB_SERIAL_ARK3116=mCONFIG_USB_SERIAL_BELKIN=mCONFIG_USB_SERIAL_CH341=m
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not setCONFIG_USB_SERIAL_CP210X=mCONFIG_USB_SERIAL_CYPRESS_M8=m
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not setCONFIG_USB_SERIAL_FUNSOFT=m
# CONFIG_USB_SERIAL_VISOR is not setCONFIG_USB_SERIAL_IPAQ=m
# CONFIG_USB_SERIAL_IR is not setCONFIG_USB_SERIAL_EDGEPORT=mCONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_GARMIN is not setCONFIG_USB_SERIAL_IPW=mCONFIG_USB_SERIAL_IUU=m
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not setCONFIG_USB_SERIAL_KLSI=mCONFIG_USB_SERIAL_KOBIL_SCT=mCONFIG_USB_SERIAL_MCT_U232=mCONFIG_USB_SERIAL_MOS7720=mCONFIG_USB_SERIAL_MOS7840=mCONFIG_USB_SERIAL_MOTOROLA=mCONFIG_USB_SERIAL_NAVMAN=mCONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not setCONFIG_USB_SERIAL_QUALCOMM=mCONFIG_USB_SERIAL_SPCP8X5=mCONFIG_USB_SERIAL_HP4X=m
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not setCONFIG_USB_SERIAL_SIERRAWIRELESS=m
# CONFIG_USB_SERIAL_SYMBOL is not setCONFIG_USB_SERIAL_TI=mCONFIG_USB_SERIAL_CYBERJACK=m
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#CONFIG_USB_EMI62=yCONFIG_USB_EMI26=yCONFIG_USB_ADUTUX=yCONFIG_USB_SEVSEG=yCONFIG_USB_RIO500=mCONFIG_USB_LEGOTOWER=yCONFIG_USB_LCD=m
# CONFIG_USB_BERRY_CHARGE is not setCONFIG_USB_LED=yCONFIG_USB_CYPRESS_CY7C63=yCONFIG_USB_CYTHERM=mCONFIG_USB_IDMOUSE=y
# CONFIG_USB_FTDI_ELAN is not setCONFIG_USB_APPLEDISPLAY=mCONFIG_USB_SISUSBVGA=m
# CONFIG_USB_SISUSBVGA_CON is not setCONFIG_USB_LD=mCONFIG_USB_TRANCEVIBRATOR=y
# CONFIG_USB_IOWARRIOR is not setCONFIG_USB_TEST=y
# CONFIG_USB_ISIGHTFW is not setCONFIG_USB_VST=yCONFIG_USB_ATM=mCONFIG_USB_SPEEDTOUCH=mCONFIG_USB_CXACRU=mCONFIG_USB_UEAGLEATM=mCONFIG_USB_XUSBATM=m
#
# OTG and related infrastructure
#CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not setCONFIG_NOP_USB_XCEIV=yCONFIG_UWB=mCONFIG_UWB_HWA=mCONFIG_UWB_WHCI=m
# CONFIG_UWB_WLP is not setCONFIG_UWB_I1480U=mCONFIG_MMC=mCONFIG_MMC_DEBUG=yCONFIG_MMC_UNSAFE_RESUME=y
#
# MMC/SD/SDIO Card Drivers
#CONFIG_MMC_BLOCK=mCONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not setCONFIG_MMC_TEST=m
#
# MMC/SD/SDIO Host Controller Drivers
#CONFIG_MMC_SDHCI=mCONFIG_MMC_SDHCI_PCI=mCONFIG_MMC_RICOH_MMC=mCONFIG_MMC_SDHCI_PLTFM=mCONFIG_MMC_WBSD=m
# CONFIG_MMC_AT91 is not set
# CONFIG_MMC_ATMELMCI is not setCONFIG_MMC_TIFM_SD=m
# CONFIG_MMC_SPI is not setCONFIG_MMC_CB710=m
# CONFIG_MMC_VIA_SDMMC is not setCONFIG_MEMSTICK=yCONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#CONFIG_MEMSTICK_UNSAFE_RESUME=yCONFIG_MSPRO_BLOCK=m
#
# MemoryStick Host Controller Drivers
#CONFIG_MEMSTICK_TIFM_MS=yCONFIG_MEMSTICK_JMICRON_38X=yCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not setCONFIG_LEDS_GPIO=m
# CONFIG_LEDS_GPIO_PLATFORM is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_PCA955X is not setCONFIG_LEDS_WM831X_STATUS=mCONFIG_LEDS_DA903X=mCONFIG_LEDS_DAC124S085=m
# CONFIG_LEDS_BD2802 is not setCONFIG_LEDS_LT3593=mCONFIG_LEDS_ADP5520=y
#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=yCONFIG_LEDS_TRIGGER_TIMER=mCONFIG_LEDS_TRIGGER_HEARTBEAT=mCONFIG_LEDS_TRIGGER_BACKLIGHT=yCONFIG_LEDS_TRIGGER_GPIO=yCONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target) # # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set CONFIG_UIO=y # CONFIG_UIO_CIF is not set CONFIG_UIO_PDRV=y # CONFIG_UIO_PDRV_GENIRQ is not set CONFIG_UIO_SMX=m CONFIG_UIO_AEC=y CONFIG_UIO_SERCOS3=m CONFIG_UIO_PCI_GENERIC=y
#
# TI VLYNQ
#CONFIG_X86_PLATFORM_DEVICES=yCONFIG_DELL_LAPTOP=m
#
# Firmware Drivers
#CONFIG_EDD=yCONFIG_EDD_OFF=yCONFIG_FIRMWARE_MEMMAP=yCONFIG_DELL_RBU=yCONFIG_DCDBAS=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not setCONFIG_EXT2_FS_XIP=yCONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not setCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not setCONFIG_FS_XIP=yCONFIG_JBD=yCONFIG_JBD_DEBUG=yCONFIG_FS_MBCACHE=yCONFIG_REISERFS_FS=yCONFIG_REISERFS_CHECK=yCONFIG_REISERFS_PROC_INFO=yCONFIG_REISERFS_FS_XATTR=yCONFIG_REISERFS_FS_POSIX_ACL=yCONFIG_REISERFS_FS_SECURITY=yCONFIG_JFS_FS=yCONFIG_JFS_POSIX_ACL=yCONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not setCONFIG_JFS_STATISTICS=yCONFIG_FS_POSIX_ACL=yCONFIG_XFS_FS=yCONFIG_XFS_QUOTA=yCONFIG_XFS_POSIX_ACL=yCONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not setCONFIG_GFS2_FS=mCONFIG_GFS2_FS_LOCKING_DLM=y
# CONFIG_OCFS2_FS is not setCONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not setCONFIG_NILFS2_FS=mCONFIG_FILE_LOCKING=yCONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not setCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_QUOTA=yCONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not setCONFIG_QUOTA_TREE=mCONFIG_QFMT_V1=mCONFIG_QFMT_V2=mCONFIG_QUOTACTL=yCONFIG_AUTOFS_FS=yCONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
# Caches
#CONFIG_FSCACHE=m
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not setCONFIG_FSCACHE_DEBUG=yCONFIG_FSCACHE_OBJECT_LIST=y
# CONFIG_CACHEFILES is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not setCONFIG_UDF_FS=yCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=yCONFIG_MSDOS_FS=y
# CONFIG_VFAT_FS is not setCONFIG_FAT_DEFAULT_CODEPAGE=437
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_SYSCTL=yCONFIG_PROC_PAGE_MONITOR=yCONFIG_SYSFS=y
# CONFIG_TMPFS is not setCONFIG_HUGETLBFS=yCONFIG_HUGETLB_PAGE=yCONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not setCONFIG_EXPORTFS=y
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=yCONFIG_ACORN_PARTITION=yCONFIG_ACORN_PARTITION_CUMANA=yCONFIG_ACORN_PARTITION_EESOX=yCONFIG_ACORN_PARTITION_ICS=yCONFIG_ACORN_PARTITION_ADFS=yCONFIG_ACORN_PARTITION_POWERTEC=yCONFIG_ACORN_PARTITION_RISCIX=y
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not setCONFIG_ATARI_PARTITION=yCONFIG_MAC_PARTITION=yCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=yCONFIG_MINIX_SUBPARTITION=y
# CONFIG_SOLARIS_X86_PARTITION is not setCONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not setCONFIG_SGI_PARTITION=yCONFIG_ULTRIX_PARTITION=yCONFIG_SUN_PARTITION=yCONFIG_KARMA_PARTITION=yCONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not setCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=mCONFIG_NLS_CODEPAGE_737=m
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not setCONFIG_NLS_CODEPAGE_855=mCONFIG_NLS_CODEPAGE_857=mCONFIG_NLS_CODEPAGE_860=mCONFIG_NLS_CODEPAGE_861=mCONFIG_NLS_CODEPAGE_862=m
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not setCONFIG_NLS_CODEPAGE_866=m
# CONFIG_NLS_CODEPAGE_869 is not setCONFIG_NLS_CODEPAGE_936=mCONFIG_NLS_CODEPAGE_950=yCONFIG_NLS_CODEPAGE_932=yCONFIG_NLS_CODEPAGE_949=mCONFIG_NLS_CODEPAGE_874=yCONFIG_NLS_ISO8859_8=m
# CONFIG_NLS_CODEPAGE_1250 is not setCONFIG_NLS_CODEPAGE_1251=mCONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not setCONFIG_NLS_ISO8859_2=yCONFIG_NLS_ISO8859_3=yCONFIG_NLS_ISO8859_4=mCONFIG_NLS_ISO8859_5=yCONFIG_NLS_ISO8859_6=y
# CONFIG_NLS_ISO8859_7 is not setCONFIG_NLS_ISO8859_9=m
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not setCONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not setCONFIG_NLS_KOI8_U=mCONFIG_NLS_UTF8=yCONFIG_DLM=mCONFIG_DLM_DEBUG=y
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=yCONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not setCONFIG_FRAME_WARN=2048CONFIG_MAGIC_SYSRQ=yCONFIG_STRIP_ASM_SYMS=yCONFIG_UNUSED_SYMBOLS=yCONFIG_DEBUG_FS=yCONFIG_HEADERS_CHECK=yCONFIG_DEBUG_SECTION_MISMATCH=yCONFIG_DEBUG_KERNEL=yCONFIG_DEBUG_SHIRQ=yCONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_NMI_WATCHDOG is not set
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not setCONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not setCONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0CONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=yCONFIG_TIMER_STATS=yCONFIG_DEBUG_OBJECTS=yCONFIG_DEBUG_OBJECTS_SELFTEST=yCONFIG_DEBUG_OBJECTS_FREE=y
# CONFIG_DEBUG_OBJECTS_TIMERS is not setCONFIG_DEBUG_OBJECTS_WORK=yCONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1CONFIG_SLUB_DEBUG_ON=y
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not setCONFIG_DEBUG_SPINLOCK=yCONFIG_DEBUG_MUTEXES=yCONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not setCONFIG_LOCKDEP=yCONFIG_LOCK_STAT=yCONFIG_DEBUG_LOCKDEP=yCONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not setCONFIG_STACKTRACE=yCONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_VM is not setCONFIG_DEBUG_VIRTUAL=yCONFIG_DEBUG_WRITECOUNT=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not setCONFIG_DEBUG_SG=yCONFIG_DEBUG_NOTIFIERS=yCONFIG_DEBUG_CREDENTIALS=yCONFIG_ARCH_WANT_FRAME_POINTERS=yCONFIG_FRAME_POINTER=yCONFIG_BOOT_PRINTK_DELAY=yCONFIG_RCU_TORTURE_TEST=mCONFIG_RCU_CPU_STALL_DETECTOR=yCONFIG_BACKTRACE_SELF_TEST=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not setCONFIG_LKDTM=mCONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not set
# CONFIG_FAIL_PAGE_ALLOC is not setCONFIG_FAIL_MAKE_REQUEST=yCONFIG_FAIL_IO_TIMEOUT=y
# CONFIG_FAULT_INJECTION_DEBUG_FS is not setCONFIG_LATENCYTOP=yCONFIG_SYSCTL_SYSCALL_CHECK=yCONFIG_DEBUG_PAGEALLOC=yCONFIG_USER_STACKTRACE_SUPPORT=yCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=yCONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_HAVE_SYSCALL_TRACEPOINTS=yCONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_BUILD_DOCSRC is not set
# CONFIG_DYNAMIC_DEBUG is not setCONFIG_DMA_API_DEBUG=yCONFIG_SAMPLES=yCONFIG_SAMPLE_KOBJECT=mCONFIG_SAMPLE_KPROBES=m
# CONFIG_SAMPLE_KRETPROBES is not setCONFIG_SAMPLE_HW_BREAKPOINT=mCONFIG_HAVE_ARCH_KGDB=yCONFIG_KGDB=yCONFIG_KGDB_SERIAL_CONSOLE=yCONFIG_KGDB_TESTS=yCONFIG_HAVE_ARCH_KMEMCHECK=yCONFIG_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not setCONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not setCONFIG_DEBUG_STACKOVERFLOW=yCONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PER_CPU_MAPS is not setCONFIG_X86_PTDUMP=yCONFIG_DEBUG_RODATA=yCONFIG_DEBUG_RODATA_TEST=yCONFIG_DEBUG_NX_TEST=mCONFIG_IOMMU_STRESS=yCONFIG_HAVE_MMIOTRACE_SUPPORT=yCONFIG_X86_DECODER_SELFTEST=yCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not setCONFIG_DEFAULT_IO_DELAY_TYPE=0CONFIG_DEBUG_BOOT_PARAMS=yCONFIG_CPA_DEBUG=y
# CONFIG_OPTIMIZE_INLINING is not set
#
# Security options
#CONFIG_KEYS=yCONFIG_KEYS_DEBUG_PROC_KEYS=yCONFIG_SECURITY=yCONFIG_SECURITYFS=yCONFIG_SECURITY_NETWORK=yCONFIG_SECURITY_NETWORK_XFRM=yCONFIG_SECURITY_PATH=y
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not setCONFIG_DEFAULT_SECURITY_DAC=yCONFIG_DEFAULT_SECURITY=""CONFIG_XOR_BLOCKS=mCONFIG_ASYNC_CORE=mCONFIG_ASYNC_MEMCPY=mCONFIG_ASYNC_XOR=mCONFIG_ASYNC_PQ=mCONFIG_ASYNC_RAID6_RECOV=mCONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_FIPS=yCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD=yCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_BLKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG=yCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_PCOMP=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=yCONFIG_CRYPTO_GF128MUL=y
# CONFIG_CRYPTO_NULL is not setCONFIG_CRYPTO_WORKQUEUE=yCONFIG_CRYPTO_CRYPTD=yCONFIG_CRYPTO_AUTHENC=yCONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not setCONFIG_CRYPTO_GCM=yCONFIG_CRYPTO_SEQIV=y
#
# Block modes
#CONFIG_CRYPTO_CBC=mCONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not setCONFIG_CRYPTO_ECB=mCONFIG_CRYPTO_LRW=mCONFIG_CRYPTO_PCBC=mCONFIG_CRYPTO_XTS=mCONFIG_CRYPTO_FPU=m
#
# Hash modes
#CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not setCONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_MD4 is not setCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not setCONFIG_CRYPTO_RMD256=m
# CONFIG_CRYPTO_RMD320 is not setCONFIG_CRYPTO_SHA1=mCONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not setCONFIG_CRYPTO_TGR192=mCONFIG_CRYPTO_WP512=mCONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=y
#
# Ciphers
#CONFIG_CRYPTO_AES=yCONFIG_CRYPTO_AES_X86_64=yCONFIG_CRYPTO_AES_NI_INTEL=mCONFIG_CRYPTO_ANUBIS=mCONFIG_CRYPTO_ARC4=yCONFIG_CRYPTO_BLOWFISH=yCONFIG_CRYPTO_CAMELLIA=yCONFIG_CRYPTO_CAST5=mCONFIG_CRYPTO_CAST6=y
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not setCONFIG_CRYPTO_SALSA20_X86_64=mCONFIG_CRYPTO_SEED=m
# CONFIG_CRYPTO_SERPENT is not setCONFIG_CRYPTO_TEA=yCONFIG_CRYPTO_TWOFISH=mCONFIG_CRYPTO_TWOFISH_COMMON=m
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
#
# Compression
#CONFIG_CRYPTO_DEFLATE=yCONFIG_CRYPTO_ZLIB=mCONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#CONFIG_CRYPTO_ANSI_CPRNG=yCONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not setCONFIG_HAVE_KVM=yCONFIG_HAVE_KVM_IRQCHIP=yCONFIG_HAVE_KVM_EVENTFD=yCONFIG_KVM_APIC_ARCHITECTURE=yCONFIG_VIRTUALIZATION=yCONFIG_KVM=m
# CONFIG_KVM_INTEL is not setCONFIG_KVM_AMD=mCONFIG_VIRTIO=yCONFIG_VIRTIO_RING=yCONFIG_VIRTIO_PCI=mCONFIG_VIRTIO_BALLOON=y
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_GENERIC_FIND_LAST_BIT=yCONFIG_CRC_CCITT=yCONFIG_CRC16=mCONFIG_CRC_T10DIF=yCONFIG_CRC_ITU_T=yCONFIG_CRC32=yCONFIG_CRC7=mCONFIG_LIBCRC32C=yCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_LZO_COMPRESS=mCONFIG_LZO_DECOMPRESS=mCONFIG_TEXTSEARCH=yCONFIG_TEXTSEARCH_KMP=mCONFIG_TEXTSEARCH_BM=mCONFIG_TEXTSEARCH_FSM=mCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_CHECK_SIGNATURE=yCONFIG_CPUMASK_OFFSTACK=yCONFIG_NLATTR=yCONFIG_FORCE_SUCCESSFUL_BUILD=yCONFIG_FORCE_MINIMAL_CONFIG=yCONFIG_FORCE_MINIMAL_CONFIG_64=yCONFIG_FORCE_MINIMAL_CONFIG_PHYS=y
Quoted 13 lines · Ingo Molnar
i've done some testing of the bits Peter has merged into x86/bootmem in -tip, and it crashes during early bootup with:
[ 0.000000] #8 [0000012000 - 000001a000] BOOTMAP ==> [0000012000 - 000001a000] [ 0.000000] bootmem alloc of 4194304 bytes failed! [ 0.000000] Kernel panic - not syncing: Out of memory [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.33-rc7-tip-00770-g525df42-dirty #16566 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff8167410b>] panic+0x75/0x146 [ 0.000000] [<ffffffff832b0a04>] ___alloc_bootmem_node+0x0/0x60 [ 0.000000] [<ffffffff832b0c27>] __alloc_bootmem+0xb/0xd [ 0.000000] [<ffffffff832b2d7b>] sparse_init+0x34/0x2d9
Quoted 8 lines
[ 0.000000] [<ffffffff832b0dc9>] ? reserve_bootmem+0x20/0x22 [ 0.000000] [<ffffffff832aac44>] paging_init+0x43/0x52 [ 0.000000] [<ffffffff8329fb2e>] setup_arch+0x583/0x615 [ 0.000000] [<ffffffff8105e794>] ? clockevents_register_notifier+0x3e/0x4a [ 0.000000] [<ffffffff8329db07>] start_kernel+0xf3/0x349 [ 0.000000] [<ffffffff8329d276>] x86_64_start_reservations+0x7d/0x81 [ 0.000000] [<ffffffff8329d3c6>] x86_64_start_kernel+0x14c/0x15b [ 0.000000] Rebooting in 1 seconds..Press any key to enter the menu
sorry, i deleted one line by mistake...
please check
Subject: [PATCH] x86: fix bootmem with non numa after early_res change
Ingo found early_res replacing bootmem code broke original bootmem code for non numa it crashes during early bootup with:
[ 0.000000] #8 [0000012000 - 000001a000] BOOTMAP ==> [0000012000 - 000001a000] [ 0.000000] bootmem alloc of 4194304 bytes failed! [ 0.000000] Kernel panic - not syncing: Out of memory [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.33-rc7-tip-00770-g525df42-dirty #16566 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff8167410b>] panic+0x75/0x146 [ 0.000000] [<ffffffff832b0a04>] ___alloc_bootmem_node+0x0/0x60 [ 0.000000] [<ffffffff832b0c27>] __alloc_bootmem+0xb/0xd [ 0.000000] [<ffffffff832b2d7b>] sparse_init+0x34/0x2d9 [ 0.000000] [<ffffffff832b0dc9>] ? reserve_bootmem+0x20/0x22 [ 0.000000] [<ffffffff832aac44>] paging_init+0x43/0x52 [ 0.000000] [<ffffffff8329fb2e>] setup_arch+0x583/0x615 [ 0.000000] [<ffffffff8105e794>] ? clockevents_register_notifier+0x3e/0x4a [ 0.000000] [<ffffffff8329db07>] start_kernel+0xf3/0x349 [ 0.000000] [<ffffffff8329d276>] x86_64_start_reservations+0x7d/0x81 [ 0.000000] [<ffffffff8329d3c6>] x86_64_start_kernel+0x14c/0x15b [ 0.000000] Rebooting in 1 seconds..Press any key to enter the menu
it turns out that one line should not be deleted...
need to be folded into
| commit 29a79bb1f526e506b97c7e2e794be16f8af16a01
| x86: Make 64 bit use early_res instead of bootmem before slab
arch/x86/mm/init_64.c +1 -0
@@ -584,6 +584,7 @@ void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn,/* don't touch min_low_pfn */ bootmap_size =init_bootmem_node (NODE_DATA (0 ), bootmap >>PAGE_SHIFT ,0 , end_pfn); +e820_register_active_regions (0 , start_pfn, end_pfn);free_bootmem_with_active_regions (0 , end_pfn);#else e820_register_active_regions (0 , start_pfn, end_pfn);
Quoted 5 lines · Yinghai Lu
The
reserve_early()method is list/range based and can handle vast amounts of not very fragmented memory - perfect for basically all the real bootmem purposes (which is to bootstrap the buddy).
Quoted 9 lines
reserve_early()allocated memory could be freed into the buddy later on
as well. The main reason why bootmem is 'destroyed' during free-to-buddy
is because it has excessive internal bitmaps we want to free. With a list/range basedreserve_early()mechanism there's no such problem - they can linger indefinitely and there's near zero allocation management
overhead. "
Various archs use lib/lmb.c for representing physical memory and doing early allocations. Might be something to extend ?
Cheers,
Ben.
Quoted 16 lines · Benjamin Herrenschmidt
Quoted 5 lines · Yinghai Lu
The
reserve_early()method is list/range based and can handle vast amounts of not very fragmented memory - perfect for basically all the real bootmem purposes (which is to bootstrap the buddy).Quoted 9 lines
reserve_early()allocated memory could be freed into the buddy later on
as well. The main reason why bootmem is 'destroyed' during free-to-buddy
is because it has excessive internal bitmaps we want to free. With a list/range basedreserve_early()mechanism there's no such problem - they can linger indefinitely and there's near zero allocation management
overhead. "
Quoted 2 lines
Various archs use
lib/lmb.cfor representing physical memory and doing early allocations. Might be something to extend ?
yes, could merge them later.
lmb: include memory range array, and reserved range array, and will be used till bootmem_init
early_res: is only reserved range array..., and need to be use with e820 map... and now early_res is used to replace bootmem...
will check to make e820 to be fw_memmap and move it /kernel/fw_memmap.c
Thanks
Yinghai