Skip to contentSkip to conversation

be2net: change the driver description

PATCH Applied Ajit Khaparde 2 participants 2 messages Feb 9, 2010 – Feb 12, 2010

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 6/7 be2net: change the driver description

Since the driver is supporting multiple generations of the ASIC remove ASIC generation information from the driver description. This information is displayed by modinfo.

---
 drivers/net/benet/be.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/net/benet/be.h +1 -1
index 476a5c4..b39b385 100644
@@ -38,7 +38,7 @@
 #define BE3_NAME		"ServerEngines BladeEngine3 10Gbps NIC"
 #define OC_NAME			"Emulex OneConnect 10Gbps NIC"
 #define OC_NAME1		"Emulex OneConnect 10Gbps NIC (be3)"
-#define DRV_DESC		BE_NAME "Driver"
+#define DRV_DESC		"ServerEngines BladeEngine 10Gbps NIC Driver"
 
 #define BE_VENDOR_ID 		0x19a2
 #define BE_DEVICE_ID1		0x211
Signature · 1 line
1.6.3.3
maintainer Applied
#1 lore raw

From: Ajit Khaparde <[email protected]>
Date: Tue, 9 Feb 2010 17:08:06 +0530

Quoted 5 lines

Since the driver is supporting multiple generations of the ASIC remove ASIC generation information from the driver description. This information is displayed by modinfo.

Applied to net-next-2.6