Skip to contentSkip to conversation

pci: introduce get_info_quirk callback.

PATCH In review Isaku Yamahata 3 participants 5 messages Feb 12, 2010 – Feb 13, 2010

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 pci: introduce get_info_quirk callback.

This patch fixes 525e05147d5a3bdc08caa422d108c1ef71b584b5
by introducing device specific get_info_quirk callback.
It wrongly assumes that pci host bridge class device has
header type of pci-pci bridge. But this isn't always true.
In fact i440fx pci host bridge has header type of normal device, hence it breaks i440fx and other pci host bridges.
The right fix is that header type should be checked, instead of device class.

The change set's purpose is to show PBM pci host bridge info which doesn't conform to PCI specification. So introduce get_info_quirk callback and use it for PBM.

Cc Blue Swirl <[email protected]>
Cc "Michael S. Tsirkin" <[email protected]>
---
 hw/apb_pci.c |    1 +
 hw/pci.c     |   79 ++++++++++++++++++++++++++++++++-------------------------
 hw/pci.h     |    3 ++
 3 files changed, 48 insertions(+), 35 deletions(-)
hw/apb_pci.c +1 -0
index 46d5b0e..a557469 100644
@@ -479,6 +479,7 @@ static PCIDeviceInfo pbm_pci_host_info = {
     .qdev.name = "pbm",
     .qdev.size = sizeof(PCIDevice),
     .init      = pbm_pci_host_init,
+    .get_info_quirk = pci_bridge_get_info,
     .header_type  = PCI_HEADER_TYPE_BRIDGE,
 };
 
hw/pci.c +44 -35

99 lines not on this page · raw message

hw/pci.h +3 -0
index 8b511d2..5b87acd 100644
@@ -80,6 +80,7 @@ typedef uint32_t PCIConfigReadFunc(PCIDevice *pci_dev,
 typedef void PCIMapIORegionFunc(PCIDevice *pci_dev, int region_num,
                                 pcibus_t addr, pcibus_t size, int type);
 typedef int PCIUnregisterFunc(PCIDevice *pci_dev);
+typedef void PCIGetInfoQuirkFunc(PCIDevice *pci_dev, PCIBus *bus, QDict *qdict);
 
 typedef struct PCIIORegion {
     pcibus_t addr; /* current PCI mapping address. -1 means not mapped */
@@ -240,6 +241,7 @@ void do_pci_info(Monitor *mon, QObject **ret_data);
 PCIBus *pci_bridge_init(PCIBus *bus, int devfn, uint16_t vid, uint16_t did,
                         pci_map_irq_fn map_irq, const char *name);
 PCIDevice *pci_bridge_get_device(PCIBus *bus);
+void pci_bridge_get_info(PCIDevice *dev, PCIBus *bus, QDict *qdict);
 
 static inline void
 pci_set_byte(uint8_t *config, uint8_t val)
@@ -314,6 +316,7 @@ typedef struct {
     PCIUnregisterFunc *exit;
     PCIConfigReadFunc *config_read;
     PCIConfigWriteFunc *config_write;
+    PCIGetInfoQuirkFunc *get_info_quirk;
 
     /* pci config header type */
     uint8_t header_type;
Signature · 1 line
1.6.6.1
#1 lore raw
Quoted 10 lines · Isaku Yamahata

This patch fixes 525e05147d5a3bdc08caa422d108c1ef71b584b5
by introducing device specific get_info_quirk callback.
It wrongly assumes that pci host bridge class device has
header type of pci-pci bridge. But this isn't always true.
In fact i440fx pci host bridge has header type of normal device, hence it breaks i440fx and other pci host bridges.
The right fix is that header type should be checked, instead of device class.

The change set's purpose is to show PBM pci host bridge info which doesn't conform to PCI specification.

So, PBM has header type PCI_HEADER_TYPE_NORMAL
but all config space is in bridge format?

Quoted 116 lines

So introduce get_info_quirk callback and use it for PBM.

Cc Blue Swirl <[email protected]>
Cc "Michael S. Tsirkin" <[email protected]>
---
 hw/apb_pci.c |    1 +
 hw/pci.c     |   79 ++++++++++++++++++++++++++++++++-------------------------
 hw/pci.h     |    3 ++
 3 files changed, 48 insertions(+), 35 deletions(-)
hw/apb_pci.c +1 -0
index 46d5b0e..a557469 100644
@@ -479,6 +479,7 @@ static PCIDeviceInfo pbm_pci_host_info = {
     .qdev.name = "pbm",
     .qdev.size = sizeof(PCIDevice),
     .init      = pbm_pci_host_init,
+    .get_info_quirk = pci_bridge_get_info,
     .header_type  = PCI_HEADER_TYPE_BRIDGE,
 };
 
hw/pci.c +36 -34
index 9ad63dd..1e2bde8 100644
@@ -1271,10 +1271,44 @@ static QObject *pci_get_regions_list(const PCIDevice *dev)
 
 static QObject *pci_get_devices_list(PCIBus *bus, int bus_num);
 
+void pci_bridge_get_info(PCIDevice *dev, PCIBus *bus, QDict *qdict)
+{
+    QObject *pci_bridge;
+
+    pci_bridge = qobject_from_jsonf("{ 'bus': "
+    "{ 'number': %d, 'secondary': %d, 'subordinate': %d }, "
+    "'io_range': { 'base': %" PRId64 ", 'limit': %" PRId64 "}, "
+    "'memory_range': { 'base': %" PRId64 ", 'limit': %" PRId64 "}, "
+    "'prefetchable_range': { 'base': %" PRId64 ", 'limit': %" PRId64 "} }",
+    dev->config[PCI_PRIMARY_BUS], dev->config[PCI_SECONDARY_BUS],
+    dev->config[PCI_SUBORDINATE_BUS],
+    pci_bridge_get_base(dev, PCI_BASE_ADDRESS_SPACE_IO),
+    pci_bridge_get_limit(dev, PCI_BASE_ADDRESS_SPACE_IO),
+    pci_bridge_get_base(dev, PCI_BASE_ADDRESS_SPACE_MEMORY),
+    pci_bridge_get_limit(dev, PCI_BASE_ADDRESS_SPACE_MEMORY),
+    pci_bridge_get_base(dev, PCI_BASE_ADDRESS_SPACE_MEMORY |
+                        PCI_BASE_ADDRESS_MEM_PREFETCH),
+    pci_bridge_get_limit(dev, PCI_BASE_ADDRESS_SPACE_MEMORY |
+                         PCI_BASE_ADDRESS_MEM_PREFETCH));
+
+    if (dev->config[PCI_SECONDARY_BUS] != 0) {
+        PCIBus *child_bus = pci_find_bus(bus, dev->config[PCI_SECONDARY_BUS]);
+        if (child_bus) {
+            qdict_put_obj(qobject_to_qdict(pci_bridge), "devices",
+                          pci_get_devices_list(child_bus,
+                                               dev->config[PCI_SECONDARY_BUS]));
+        }
+    }
+
+    qdict_put_obj(qdict, "pci_bridge", pci_bridge);
+}
+
 static QObject *pci_get_dev_dict(PCIDevice *dev, PCIBus *bus, int bus_num)
 {
-    int class;
+    PCIDeviceInfo *info = DO_UPCAST(PCIDeviceInfo, qdev, dev->qdev.info);
     QObject *obj;
+    QDict *qdict;
+    uint8_t type;
 
     obj = qobject_from_jsonf("{ 'bus': %d, 'slot': %d, 'function': %d,"                                       "'class_info': %p, 'id': %p, 'regions': %p,"
                               " 'qdev_id': %s }",
@@ -1283,45 +1317,20 @@ static QObject *pci_get_dev_dict(PCIDevice *dev, PCIBus *bus, int bus_num)
                               pci_get_dev_class(dev), pci_get_dev_id(dev),
                               pci_get_regions_list(dev),
                               dev->qdev.id ? dev->qdev.id : "");
+    qdict = qobject_to_qdict(obj);
 
     if (dev->config[PCI_INTERRUPT_PIN] != 0) {
-        QDict *qdict = qobject_to_qdict(obj);
         qdict_put(qdict, "irq", qint_from_int(dev->config[PCI_INTERRUPT_LINE]));
     }
 
-    class = pci_get_word(dev->config + PCI_CLASS_DEVICE);
-    if (class == PCI_CLASS_BRIDGE_HOST || class == PCI_CLASS_BRIDGE_PCI) {
-        QDict *qdict;
-        QObject *pci_bridge;
-
-        pci_bridge = qobject_from_jsonf("{ 'bus': "
-        "{ 'number': %d, 'secondary': %d, 'subordinate': %d }, "
-        "'io_range': { 'base': %" PRId64 ", 'limit': %" PRId64 "}, "
-        "'memory_range': { 'base': %" PRId64 ", 'limit': %" PRId64 "}, "
-        "'prefetchable_range': { 'base': %" PRId64 ", 'limit': %" PRId64 "} }",
-        dev->config[PCI_PRIMARY_BUS], dev->config[PCI_SECONDARY_BUS],
-        dev->config[PCI_SUBORDINATE_BUS],
-        pci_bridge_get_base(dev, PCI_BASE_ADDRESS_SPACE_IO),
-        pci_bridge_get_limit(dev, PCI_BASE_ADDRESS_SPACE_IO),
-        pci_bridge_get_base(dev, PCI_BASE_ADDRESS_SPACE_MEMORY),
-        pci_bridge_get_limit(dev, PCI_BASE_ADDRESS_SPACE_MEMORY),
-        pci_bridge_get_base(dev, PCI_BASE_ADDRESS_SPACE_MEMORY |
-                               PCI_BASE_ADDRESS_MEM_PREFETCH),
-        pci_bridge_get_limit(dev, PCI_BASE_ADDRESS_SPACE_MEMORY |
-                                PCI_BASE_ADDRESS_MEM_PREFETCH));
-
-        if (dev->config[PCI_SECONDARY_BUS] != 0) {
-            PCIBus *child_bus = pci_find_bus(bus, dev->config[PCI_SECONDARY_BUS]);
-
-            if (child_bus) {
-                qdict = qobject_to_qdict(pci_bridge);
-                qdict_put_obj(qdict, "devices",
-                              pci_get_devices_list(child_bus,
-                                                   dev->config[PCI_SECONDARY_BUS]));
-            }
-        }
-        qdict = qobject_to_qdict(obj);

hw/pci.c static QObject *pci_get_dev_dict(PCIDevice *dev, PCIBus *bus, int bus_num) · line 1334

Quoted 10 lines
hw/pci.c +8 -1
-        qdict_put_obj(qdict, "pci_bridge", pci_bridge);
+    type = dev->config[PCI_HEADER_TYPE] & ~PCI_HEADER_TYPE_MULTI_FUNCTION;
+    if (type == PCI_HEADER_TYPE_BRIDGE) {
+        pci_bridge_get_info(dev, bus, qdict);
+    }
+
+    if (info /* not all pci device aren't converted qdev yet */ &&
+        info->get_info_quirk) {
+        info->get_info_quirk(dev, bus, qdict);
     }

this should be:

Quoted 5 lines
hw/pci.c +0 -0
     if (info /* not all pci device aren't converted qdev yet */ &&
         info->get_info_quirk) {
         info->get_info_quirk(dev, bus, qdict);
     } else if type == PCI_HEADER_TYPE_BRIDGE) {
         pci_bridge_get_info(dev, bus, qdict);
       }
Quoted 32 lines
 
     return obj;
hw/pci.h +3 -0
index 8b511d2..5b87acd 100644
@@ -80,6 +80,7 @@ typedef uint32_t PCIConfigReadFunc(PCIDevice *pci_dev,
 typedef void PCIMapIORegionFunc(PCIDevice *pci_dev, int region_num,
                                 pcibus_t addr, pcibus_t size, int type);
 typedef int PCIUnregisterFunc(PCIDevice *pci_dev);
+typedef void PCIGetInfoQuirkFunc(PCIDevice *pci_dev, PCIBus *bus, QDict *qdict);
 
 typedef struct PCIIORegion {
     pcibus_t addr; /* current PCI mapping address. -1 means not mapped */
@@ -240,6 +241,7 @@ void do_pci_info(Monitor *mon, QObject **ret_data);
 PCIBus *pci_bridge_init(PCIBus *bus, int devfn, uint16_t vid, uint16_t did,
                         pci_map_irq_fn map_irq, const char *name);
 PCIDevice *pci_bridge_get_device(PCIBus *bus);
+void pci_bridge_get_info(PCIDevice *dev, PCIBus *bus, QDict *qdict);
 
 static inline void
 pci_set_byte(uint8_t *config, uint8_t val)
@@ -314,6 +316,7 @@ typedef struct {
     PCIUnregisterFunc *exit;
     PCIConfigReadFunc *config_read;
     PCIConfigWriteFunc *config_write;
+    PCIGetInfoQuirkFunc *get_info_quirk;
 
     /* pci config header type */
     uint8_t header_type;
Signature · 1 line
1.6.6.1
#2 lore raw
Quoted 9 lines · Michael S. Tsirkin
Quoted 8 lines · Isaku Yamahata

This patch fixes 525e05147d5a3bdc08caa422d108c1ef71b584b5
by introducing device specific get_info_quirk callback.
It wrongly assumes that pci host bridge class device has
header type of pci-pci bridge. But this isn't always true.
In fact i440fx pci host bridge has header type of normal device, hence it breaks i440fx and other pci host bridges.
The right fix is that header type should be checked, instead of device class.

Quoted 5 lines
Quoted 2 lines

The change set's purpose is to show PBM pci host bridge info which doesn't conform to PCI specification.

So, PBM has header type PCI_HEADER_TYPE_NORMAL
but all config space is in bridge format?

Some of registers is in bridge format.
To be honest, I don't know whether all or some. Blue seems to want bus numbers registers at least.

http://lists.gnu.org/archive/html/qemu-devel/2010-02/msg00519.html

Signature · 1 line
yamahata
#3 lore raw
Quoted 13 lines · Isaku Yamahata
Quoted 12 lines · Michael S. Tsirkin
Quoted 10 lines · Isaku Yamahata

This patch fixes 525e05147d5a3bdc08caa422d108c1ef71b584b5
by introducing device specific get_info_quirk callback.
It wrongly assumes that pci host bridge class device has
header type of pci-pci bridge. But this isn't always true.
In fact i440fx pci host bridge has header type of normal device, hence it breaks i440fx and other pci host bridges.
The right fix is that header type should be checked, instead of device class.

The change set's purpose is to show PBM pci host bridge info which doesn't conform to PCI specification.

Quoted 8 lines
Quoted 2 lines

So, PBM has header type PCI_HEADER_TYPE_NORMAL
but all config space is in bridge format?

Some of registers is in bridge format.
To be honest, I don't know whether all or some. Blue seems to want bus numbers registers at least.

http://lists.gnu.org/archive/html/qemu-devel/2010-02/msg00519.html

I'm not so sure anymore, I'll have to check this in the weekend. Perhaps there was some other problem with bus numbering or OpenBIOS PCI programming which resulted in the need to program PRIMARY/ SECONDARY/SUBORDINATE bus values for host bridge. Does it make any sense to use anything other than bus 0 for PCI bus attached to host bridge?

#4 lore raw
Quoted 21 lines · Blue Swirl
Quoted 20 lines · Isaku Yamahata
Quoted 9 lines · Michael S. Tsirkin
Quoted 8 lines · Isaku Yamahata

This patch fixes 525e05147d5a3bdc08caa422d108c1ef71b584b5
by introducing device specific get_info_quirk callback.
It wrongly assumes that pci host bridge class device has
header type of pci-pci bridge. But this isn't always true.
In fact i440fx pci host bridge has header type of normal device, hence it breaks i440fx and other pci host bridges.
The right fix is that header type should be checked, instead of device class.

Quoted 5 lines
Quoted 2 lines

The change set's purpose is to show PBM pci host bridge info which doesn't conform to PCI specification.

So, PBM has header type PCI_HEADER_TYPE_NORMAL
but all config space is in bridge format?

Some of registers is in bridge format.
To be honest, I don't know whether all or some. Blue seems to want bus numbers registers at least.

Quoted 8 lines
Quoted 1 line

http://lists.gnu.org/archive/html/qemu-devel/2010-02/msg00519.html

I'm not so sure anymore, I'll have to check this in the weekend. Perhaps there was some other problem with bus numbering or OpenBIOS PCI programming which resulted in the need to program PRIMARY/ SECONDARY/SUBORDINATE bus values for host bridge. Does it make any sense to use anything other than bus 0 for PCI bus attached to host bridge?

I found the bug in my new PCI probing code, 525e05147d5a3bdc08caa422d108c1ef71b584b5 was not correct after all. There is no need to configure host brige bus values.

So I'll apply Isaku's earlier fix that removes the bogus host bridge data from 'info pci'.